Bonzer Plastic Lid Dispenser 600mm product image

Bonzer

Bonzer Plastic Lid Dispenser 600mm - 79–90mm

SKU: 12575-04/10099-01

£71.03(£85.24 inc VAT)

Lid Size: 79mm - 10099-01
Need a quantity discount?

Request a callback

Leave your details and we will call you back about Bonzer Plastic Lid Dispenser 600mm - 79–90mm.

Delivery Information

Price Match

  • In the event of equipment failure any parts needed will be provided 2
  • This product is Made in Britain

This is Bonzer's plastic elevator lid dispenser, designed to sit flush within a counter surface and deliver lids cleanly and consistently during service. The dispenser uses an elevator mechanism — lids are pushed upward as each one is taken — keeping the stack accessible without the mess associated with loose lids left out on a counter. The 600mm tube accommodates a generous stack depth, reducing how often the dispenser needs refilling during a busy shift.

In practice, these dispensers suit any operation serving hot drinks in lidded cups: coffee shops, cafés, quick-service restaurants, staff canteens, or hospitality venues with a self-serve or staffed beverage station. The enclosed tube keeps lids hygienically protected from airborne contamination and incidental contact, which matters in a commercial setting where food hygiene standards apply as much to packaging as to food itself.

Fitting requires a circular cutout in the counter surface, with a 120mm aperture and a front ring of 153mm — so the unit is best specified at the counter-build or refurbishment stage, though it can be retrofitted into suitable surfaces. The plastic construction keeps the unit lightweight and the cost lower than stainless alternatives, making it a practical choice where multiple dispensers are needed across a counter run.

This particular model is sized for lids with a diameter of 79–90mm. Getting that measurement right is the most important step — measure the rim diameter of the lid itself, not the cup. If you are unsure of your lid sizing or need guidance on how many dispensers your counter layout requires, feel free to get in touch with the team before ordering.

Frequently asked questions

How do I know if this dispenser will fit my lids?

Measure the rim diameter of the lid itself — not the cup base or top opening. This dispenser is designed for lids with a rim diameter of 79–90mm. If your lids fall outside that range, a different tube size will be required, and it is worth checking before ordering.

Does this dispenser sit on the counter or fit into it?

This is an in-counter model, meaning it requires a circular cutout in the counter surface — 120mm aperture, with a 153mm front ring sitting flush on top. It is best specified during a counter build or refurbishment, though it can be retrofitted into worktops where the material allows drilling or cutting to that size.

Is the plastic version suitable for a busy commercial environment?

Yes, for most café and quick-service operations the plastic tube performs reliably and is a practical choice where multiple dispensers are installed across a counter run. For very high-volume sites or where a more robust finish is preferred, stainless steel alternatives are available in the same elevator format.
Bonzer Plastic Lid Dispenser 600mm - 79–90mm

£71.03(£85.24 inc VAT)

£71.03(£85.24 inc VAT)

Options
Lid Size: 79mm - 10099-01
  • 79mm - 10099-01
  • 85mm - 10099-02
  • 89mm - 10099-03
  • 90mm - 10099-04

This is Bonzer's plastic elevator lid dispenser, designed to sit flush within a counter surface and deliver lids cleanly and consistently during service. The dispenser uses an elevator mechanism — lids are pushed upward as each one is taken — keeping the stack accessible without the mess associated with loose lids left out on a counter. The 600mm tube accommodates a generous stack depth, reducing how often the dispenser needs refilling during a busy shift.

In practice, these dispensers suit any operation serving hot drinks in lidded cups: coffee shops, cafés, quick-service restaurants, staff canteens, or hospitality venues with a self-serve or staffed beverage station. The enclosed tube keeps lids hygienically protected from airborne contamination and incidental contact, which matters in a commercial setting where food hygiene standards apply as much to packaging as to food itself.

Fitting requires a circular cutout in the counter surface, with a 120mm aperture and a front ring of 153mm — so the unit is best specified at the counter-build or refurbishment stage, though it can be retrofitted into suitable surfaces. The plastic construction keeps the unit lightweight and the cost lower than stainless alternatives, making it a practical choice where multiple dispensers are needed across a counter run.

This particular model is sized for lids with a diameter of 79–90mm. Getting that measurement right is the most important step — measure the rim diameter of the lid itself, not the cup. If you are unsure of your lid sizing or need guidance on how many dispensers your counter layout requires, feel free to get in touch with the team before ordering.