Alto-Shaam Cook and Hold Ovens

The Alto-Shaam 1200-UP/SR is a large-format heated holding cabinet built around two independently controlled compartments stacked within a single unit. Each section operates at its own temperature, allowing operators to hold different food types simultaneously without cross-contamination of heat zones. The cabinet uses Alto-Shaam's Halo Heat technology — a gentle, radiant low-wattage heating system — rather than forced air or humidity injection, which helps maintain food quality over extended holding periods without drying out surface textures or over-cooking held product.

In busy kitchen environments, the ability to hold large quantities of food at precise temperatures without constant monitoring is operationally valuable. The dual-zone configuration suits services where the menu demands different holding temperatures at the same time — roasted proteins alongside delicate fish or vegetable dishes, for example. The temperature range of 16°C to 93°C gives operators meaningful flexibility across a broad menu range, and the independent controls mean one section can be adjusted or switched without affecting the other.

Key practical advantages for kitchen teams include:

• Two independently controlled zones within a single footprint — holds more without expanding the floor plan
• Gentle Halo Heat system reduces moisture loss and preserves food presentation during holding
• Wide temperature range accommodates a broad variety of menu items simultaneously
• Stainless steel construction supports rigorous cleaning routines and withstands heavy daily use
• Reduces the pressure on pass timing during peak service by extending safe holding windows

At 151kg and standing just under two metres tall, this is a substantial piece of equipment. It requires careful placement — access for loading from both front and sides should be considered during kitchen planning, and the floor must be capable of supporting the loaded weight. Connection is straightforward electrically, but positioning relative to the pass and prep areas will affect how efficiently the unit integrates into the service flow.

This cabinet is well suited to high-volume operations: hotel kitchens, event catering facilities, contract caterers, and large restaurant groups running split or extended services. For smaller kitchens or more modest service volumes, a single-section holding cabinet is likely sufficient and more practical in terms of footprint and running cost. For sites with very high throughput or additional holding requirements, larger-capacity configurations exist within the Alto-Shaam range.

If you are unsure whether the dual-zone configuration is the right fit for your service style, or if you would like to talk through placement and integration with your existing kitchen layout, the team is happy to work through the detail with you before you commit.

The Alto-Shaam 1750-TH/SX is a large-capacity, low-temperature cook and hold oven designed for commercial kitchens that need to produce and hold substantial volumes of cooked food reliably throughout a service period. It houses two independent cooking compartments within a single footprint, each operating separately so operators can run different products, temperatures, or holding programmes simultaneously. Control is kept deliberately straightforward: an icon-based touch interface combined with a single knob handles temperature setting, cook time, and hold time, with capacity to store up to eight programmable recipes. Cooking can be managed by time or via a single temperature probe, making it accessible to kitchen teams without extensive training.

At the core of the oven is Alto-Shaam's Halo Heat technology — a fanless, waterless gentle radiant heat system that surrounds food evenly without forced air circulation. In practice this means less moisture loss during the cooking process, better yield from expensive proteins, and food that holds its quality over extended periods rather than drying out or degrading. For operations cooking large joints, whole birds, or batch quantities of portioned proteins ahead of service, this translates directly into more consistent plate output and reduced waste across a shift.

From an operational standpoint, the dual-cavity configuration is one of the more useful aspects of this unit. Key practical advantages include:

• Independent compartment control allows different products to cook or hold simultaneously
• Halo Heat technology reduces shrinkage and moisture loss for better yield
• Up to eight stored recipes support consistent, repeatable production across shifts
• Fanless design means no forced-air cross-contamination between compartments
• Simple icon-based controls reduce training time and operator error

Installation considerations are worth reviewing carefully at this scale. At 158kg the unit requires a firm, level surface capable of bearing the load, and delivery and positioning will typically need more than one person. The footprint is substantial at just over a metre deep, so space planning matters, particularly in kitchens with tight service corridors or restricted back-of-house areas. Electrical connection requirements should be confirmed with your installation contractor before ordering, and as with any cook and hold equipment, ventilation in the surrounding area should be assessed.

This oven is well suited to high-volume operations: hotel banqueting, large contract catering facilities, central production kitchens, and busy pub or restaurant groups running significant covers. It is particularly valuable where overnight or extended cook cycles are part of the production model. For kitchens with lower throughput demands, smaller single-cavity models in the range may be a more proportionate fit; equally, operations with exceptionally high volumes or more complex multi-zone cooking needs may want to explore alternatives before committing.

If you are weighing up whether this unit is the right scale for your operation, or have questions about installation requirements specific to your site, the team is happy to talk it through before you make a decision.

The Alto-Shaam 1200-TH/SX is a dual-cavity cook and hold oven designed for high-volume commercial kitchens that need to cook large quantities of food to a consistent standard and hold them at serving temperature without loss of quality. It uses Alto-Shaam's proprietary Halo Heat technology — a low-temperature, fanless, waterless radiant heating system that surrounds food with gentle, even heat rather than forcing hot air across it. This approach is central to how the oven performs and is worth understanding before you commit to a purchase.

In practice, Halo Heat produces notably lower shrinkage on proteins compared with conventional forced-air ovens. Operators cooking large volumes of joints, poultry, or pork benefit from higher finished yields per batch, which has a direct effect on food cost over time. Because the two cavities operate independently, you can run different products or programmes simultaneously — useful in kitchens where different menu items need different cook profiles. The simple control interface uses icon-based touch controls and a single knob, with capacity for up to eight stored recipes, which keeps operation straightforward for kitchen teams without extensive training.

Practical operational advantages include:

• Independent dual-cavity control for running separate products simultaneously
• Low-temperature Halo Heat reduces moisture loss and improves yield on proteins
• Holds cooked food at consistent serving temperature without deterioration
• Simple icon-based interface with programmable recipe storage reduces operator error
• Cook-by-time or single probe options suit different production methods

The unit is a floor-standing model with a footprint that suits most larder or production kitchen areas, though at 126kg it will require appropriate handling and positioning on installation. Electrical supply requirements should be confirmed with your installer before delivery. There are no water or drain connections required, which simplifies installation considerably. It is not a ventilated oven in the conventional sense, so standard catering ventilation provisions apply — check with your kitchen designer if you are unsure.

The 1200-TH/SX is well suited to high-volume production operations: hotel banqueting kitchens, contract catering facilities, central production units, and large staff or institutional catering operations where consistent batch cooking and reliable holding are priorities. It is less suited to small or medium kitchens where the throughput does not justify the footprint or capital cost. For operations with lower volume requirements, a single-cavity model may be more appropriate; for sites with significantly greater output demands, higher-capacity options exist within the Alto-Shaam range.

If you are weighing up whether this model fits your production volumes or want to talk through how Halo Heat compares to your current setup, our team is happy to work through the specifics with you before you order.

The Alto-Shaam 1000-TH/SX is the largest single-compartment model in the Alto-Shaam cook and hold range, designed to cook and hold up to 54kg of product ready for service. It uses Alto-Shaam's Halo Heat technology — a low-temperature, fanless, waterless heating system that surrounds the food with gentle, consistent radiant heat rather than forced air or moisture. The result is more even cooking, significantly reduced product shrinkage, and food held at consistent temperature without continuing to cook.

In busy service environments, the practical value of a cook and hold oven is substantial. Product can be cooked overnight or during quiet periods and held safely at serving temperature, ready to carve or plate directly through a busy lunch or dinner service. Because Halo Heat operates at low temperatures without fans, there is no surface drying and no need to manage moisture levels manually. Recovery between loads is straightforward, and the oven maintains stable hold temperatures reliably over extended periods — which matters when service runs longer than expected.

From an operational standpoint, the benefits that kitchen teams tend to notice most are:

• Reduced shrinkage compared with conventional high-temperature roasting
• Consistent results across repeated cooks with minimal supervision
• Programmable recipe storage for up to eight settings, reducing reliance on staff memory
• Simple icon-based touch controls with a single knob, accessible for all skill levels
• Cook by time or probe temperature, with separate cook and hold phase settings

Installation is relatively straightforward compared with combi ovens or high-powered equipment, though at 97kg this unit requires proper planning for positioning and access. It is worth confirming electrical supply requirements with your installer before delivery, and ensuring the chosen location allows adequate clearance for door operation and loading. It does not require a water connection or extraction canopy in the way that steam or combi equipment typically does, which simplifies placement in many kitchens.

This model is well suited to high-volume operations — hotels, contract caterers, large pub kitchens, and event catering teams — where holding large quantities of cooked protein at service-ready temperature is a regular requirement. For smaller operations or those cooking in lower volumes, a smaller model within the Alto-Shaam range would likely be a better fit without the same footprint commitment. For sites needing to run multiple product types simultaneously, a multi-compartment configuration may be worth considering.

If you are unsure whether this capacity is right for your service volumes or kitchen layout, the team is happy to work through the options with you before you commit.

The Alto-Shaam 750-TH/SX is a low-temperature cook and hold oven designed for commercial kitchens where consistent food quality and reduced shrinkage are operational priorities. It uses Alto-Shaam's Halo Heat technology — a fanless, waterless gentle radiant heat system — to cook at lower temperatures over longer periods, preserving moisture and improving yield compared with conventional high-heat cooking methods.

In busy production environments, cook and hold equipment earns its place by decoupling cooking from service. Product can be cooked well ahead of a service period and held at a safe, stable temperature without ongoing deterioration in texture or moisture. The 750-TH/SX handles up to 45kg of product and accepts up to ten 1/1 GN pans, making it practical for banqueting operations, contract catering facilities, and high-volume event kitchens where batch cooking is central to the workflow.

The simple control interface uses icon-based touch controls and a single knob to set cook temperature, cook time, and hold time. Operators can cook by time or via a single temperature probe, and store up to eight programmable recipes — useful for teams where consistency across shifts matters.

• Fanless Halo Heat system reduces moisture loss and improves product yield
• Holds product at stable temperature without overcooking during extended service
• Straightforward controls reduce training time and operator error
• Stackable and counter-friendly footprint supports flexible kitchen layouts
• No water connection required simplifies installation requirements

At 158kg, the unit requires a firm, level surface capable of bearing significant load. The footprint is compact relative to its capacity, and the design supports stacking with compatible Alto-Shaam equipment, which can be useful where vertical space is available. There is no water connection requirement, which removes one installation variable, though electrical supply requirements should be confirmed against your kitchen's current capacity before ordering.

This model suits operations running structured batch production — banqueting teams, large contract catering sites, or central production kitchens. For smaller kitchens with lower throughput needs, a reduced-capacity alternative may be more appropriate, while very high-volume or multi-rack operations may benefit from a larger unit in the range.

If you're unsure whether this model fits your production volumes or kitchen setup, the team is happy to work through the detail with you before you commit.

The Alto-Shaam 500-TH/SX is a low-temperature cook and hold oven built around the brand's Halo Heat technology — a fanless, waterless radiant heat system that surrounds food with gentle, consistent heat rather than circulating hot air. The result is even cooking with minimal moisture loss, which translates directly into better yields and more consistent plate presentation across a service.

In a busy kitchen environment, the real value of a cook and hold unit becomes clear at service time. Food can be cooked in advance and held at safe serving temperature without continuing to cook, dry out, or deteriorate — a significant operational advantage for roasts, poultry, joints, and other protein-heavy menus. The 500-TH/SX is particularly well suited to kitchens where staff ratios are tight or where service windows are unpredictable, as it reduces the pressure of last-minute cooking and allows better forward planning.

Practically, the unit offers straightforward operation through an icon-based touch interface and single control knob. Operators can cook by time or use a single temperature probe, and up to eight recipes can be stored for consistent, repeatable results across different staff members. Key operational advantages include:

• Reduced meat shrinkage compared with conventional high-temperature cooking
• Consistent hold temperatures without overcooking or drying
• Simple controls that require minimal staff training
• No water connection required — straightforward placement and installation
• Compact footprint suitable for counter placement or under-counter installation

The unit is floor-standing and requires a dedicated electrical supply. At 126kg it is a substantial piece of equipment, so installation position should be agreed before delivery. No water or ventilation connection is required, which gives reasonable flexibility on placement — though clearance around the unit for heat dissipation and door access should be factored in. The stainless steel construction is practical for commercial kitchen hygiene requirements.

The 500-TH/SX is well suited to hotels, pub kitchens, contract catering operations, and restaurants with a regular roast or protein-led menu. It suits sites cooking between one and three services daily rather than very high-volume continuous operations. For larger kitchens requiring greater capacity or multi-rack holding across high-volume service periods, higher-capacity models in the Alto-Shaam range may be more appropriate.

If you are unsure whether this model matches your service volumes or kitchen setup, we are happy to talk it through before you commit to a purchase.

The Alto-Shaam 300-TH/SX is a low-temperature cook and hold oven designed for commercial kitchens where consistency, yield, and simplicity of operation are priorities. It uses Alto-Shaam's Halo Heat technology — a fanless, waterless radiant heat system that surrounds food with gentle, even warmth rather than circulating hot air. This approach reduces moisture loss during cooking and holding, which typically means better yields and product quality compared with conventional forced-air methods.

In service, the oven earns its place through reliability rather than speed. It is not a high-throughput blast oven — it is built for slow, controlled cooking of proteins and bulk items overnight or during quiet periods, then holding them at precise serving temperature through a busy lunch or dinner service. Operators running roasts, pulled meats, whole joints, or large poultry portions will find it well suited to the task. Recovery after door openings is stable, and the holding performance means food can sit without deteriorating in texture or moisture for extended periods.

From an operational standpoint, the practical advantages include:

• Fanless operation reduces noise on the pass and eliminates the drying effect of circulated air
• Icon-based touch controls and a single temperature knob keep training time minimal
• Cook by time or probe, with up to eight programmable recipes stored on-board
• Consistent yields help reduce food cost over time, particularly on high-value proteins
• Stainless steel construction supports straightforward daily cleaning routines

Installation requirements are relatively straightforward compared with combi ovens — there is no steam generation, so no water connection or drain is needed. Electrical requirements should be confirmed with your supplier before ordering, and the unit's 97kg weight means positioning should be planned carefully, particularly if counter or shelf mounting is being considered. The 300-TH/SX accepts up to three 1/1 GN pans (100mm deep), making it the entry point in the Alto-Shaam cook and hold range. For kitchens with higher volume demands or larger batch requirements, heavier-duty models in the range offer greater capacity.

This model is well suited to smaller restaurants, hotel kitchens, pub operations, and contract catering sites where a reliable overnight cook and hold capability is needed without the complexity or footprint of a full combi oven. It is equally useful as a supplementary unit in larger kitchens looking to free up combi capacity during peak service.

If you are unsure whether the 300-TH/SX is the right fit for your volume and menu, our team is happy to talk through your requirements before you commit.

The Alto-Shaam 1000-UP is a double compartment holding cabinet designed to keep large volumes of prepared food at safe, consistent serving temperatures for extended periods. Built in stainless steel and standing at just under two metres tall, it is a substantial piece of equipment suited to high-output kitchens where food is prepared in advance of service and needs to be held without any loss of quality.

The cabinet uses Alto-Shaam's Halo Heat system, which circulates gentle, uniform warmth around the food rather than using a fan or intense direct heat. In practical terms, this means proteins retain moisture, pastry stays crisp rather than steaming soft, and batch-cooked dishes hold their texture and appearance across a long service period. For kitchens running split shifts or banqueting operations where large volumes must be ready and waiting, this approach to holding is noticeably better than conventional heated cabinets.

From an operational standpoint, the benefits are straightforward:

• Food can be prepared hours ahead of service without quality loss, freeing up cook time during the peak period.
• Reduced shrinkage and moisture loss compared to fan-assisted holding, which directly lowers food cost over time.
• Two independent compartments allow different food types to be held simultaneously at different temperatures.
• The digital thermostat gives clear, accurate temperature monitoring, which supports food safety record-keeping.
• Shelves are removable for cleaning, keeping daily maintenance practical in a busy kitchen.

At 128kg and with a footprint of 608mm wide by 804mm deep, this is not a cabinet to position as an afterthought. It requires a dedicated floor space, good access for loading and unloading, and a suitable electrical supply. Anyone specifying this for a new or refurbished kitchen should factor in its height and weight when planning workflow around it.

The 1000-UP is well suited to large hotel kitchens, event catering operations, contract catering sites, and central production units where holding capacity is a genuine operational priority. For smaller kitchens or those with more modest holding requirements, a single-compartment model from the same range may be a more proportionate choice. For sites running very high volumes continuously, a larger or multi-unit configuration may be worth exploring.

If you are unsure whether this cabinet is the right fit for your kitchen's throughput and workflow, our team is happy to talk it through before you commit.

The Alto-Shaam 1200-S/SR is a large-capacity heated holding cabinet designed to keep prepared food at a consistent, safe serving temperature for extended periods. It is built for commercial kitchens where food is batch-cooked ahead of service and needs to be held without deteriorating in quality before it reaches the plate.

The cabinet uses Alto-Shaam's Halo Heat technology, which generates a gentle, uniform warmth that surrounds the food rather than blasting it with forced hot air. In practical terms, this means food held for two or three hours before service looks and tastes much closer to freshly cooked — less surface drying, less shrinkage, and better moisture retention. This is particularly relevant in high-volume operations such as hotels, contract catering, central production kitchens, and busy restaurants where covers are spread across a long service window.

From an operational standpoint, the cabinet offers several day-to-day advantages:

• Allows batch cooking hours before service, reducing peak-time pressure on kitchen staff
• Consistent holding temperature reduces food waste from overcooking during hold
• Digital thermostat with electronic display makes temperature monitoring straightforward
• Shelves are removable for cleaning, keeping hygiene management simple
• Stainless steel construction suits high-use, washdown environments

The cabinet is a freestanding unit. Before installation, it is worth confirming that your kitchen layout can accommodate the footprint comfortably, with adequate clearance around the unit for ventilation and access. As a dry heat cabinet, it does not require a water supply or drainage connection, which simplifies placement. Electrical requirements should be confirmed with your installer prior to delivery.

This model is well suited to mid-to-large catering operations that need reliable holding capacity across a full service period. Smaller operations with lighter holding demands may find a more compact model sufficient, while very high-volume central production sites may benefit from a heavier-duty unit with greater capacity.

If you are unsure whether this cabinet is the right fit for your holding volumes or kitchen setup, our team is happy to talk it through with you before you commit to an order.

The Alto-Shaam 1000-S is a full-size holding cabinet designed to keep prepared food at safe, consistent serving temperatures for extended periods without continuing to cook it. It uses Alto-Shaam's proprietary Halo Heat technology — a low-wattage, radiant heat system that surrounds food with gentle, uniform warmth rather than relying on fan-driven hot air or steam. The result is food that stays at temperature without the surface drying, shrinkage, or overcooking that conventional holding methods can cause.

In a busy commercial kitchen, the practical value of reliable holding is significant. Operators can prepare food well ahead of service, hold it safely, and maintain quality across the entire service period without relying on last-minute batching or risking inconsistent output during peak demand. The cabinet is well suited to high-throughput situations where the gap between production and service can stretch to several hours — events catering, banqueting, school meal services, and high-volume restaurant kitchens being typical environments.

From an operational standpoint, the 1000-S offers a number of day-to-day advantages:

• Extended holding without quality loss reduces food waste and the cost of overcooking
• Digital thermostat with electronic temperature display supports accurate food safety monitoring
• Shelf-removal design simplifies daily cleaning and end-of-service wipe-down
• Consistent hold temperatures reduce reliance on chefs for last-minute re-firing
• Frees up oven and cooking capacity during service by removing the need to hold food in active equipment

Installation is relatively straightforward. The cabinet is a self-contained electric unit requiring a suitable power supply — confirm your available supply against the unit's requirements before ordering. At 79kg, it is a substantial piece of equipment and will need adequate floor space and clear access. The stainless steel construction is appropriate for commercial kitchen environments and should be considered a fixed or semi-fixed installation rather than something moved regularly.

The 1000-S is well suited to mid-to-high volume operations with a consistent need to hold large batches of cooked food across a service period. It is not designed for short-hold or display purposes. Smaller operations with lower throughput may find a compact holding unit sufficient, while very large central production kitchens running multiple service lines may benefit from a higher-capacity configuration.

If you are unsure whether this model fits your service volumes or kitchen setup, we are happy to talk it through before you commit.

The Alto-Shaam 750-S is a heated holding cabinet designed to maintain cooked food at safe, consistent serving temperatures for extended periods without overcooking, drying out, or degrading food quality. It is built around Alto-Shaam's proprietary Halo Heat technology, which uses a low-wattage, radiant heat cable wrapped around the interior cavity rather than a conventional forced-air or element-based system. The result is a uniform, gentle heat environment that holds food in stable condition for several hours after cooking is complete.

In busy kitchen environments, the ability to hold food reliably over service periods has a direct impact on both food cost and consistency of output. The 750-S is well suited to operations where batch cooking ahead of service is part of the workflow — roasted and braised meats, poultry, and portioned hot food all respond well to Halo Heat holding. Unlike blast-and-hold or convection-based systems, there is no airflow to accelerate moisture loss, which means portion yield holds up over a longer window. Operators running split services or extended banqueting often find this particularly useful.

Key practical advantages for kitchen teams include:

• Gentle holding reduces shrinkage and moisture loss compared to conventional heated holding
• Digital thermostat allows precise temperature monitoring for food safety compliance
• Simple interior design — shelves remove easily for routine cleaning
• Consistent temperature throughout the cavity reduces the need for rotation or monitoring
• Batch cooking ahead of service reduces labour pressure at peak times

The 750-S is a freestanding stainless steel unit requiring a standard electrical connection. At 71kg, it is a substantial piece of equipment and its footprint should be confirmed against available floor or counter space before ordering. It is not a regeneration unit and is not designed to bring cold food back to temperature — it is a holding tool, used after cooking is complete.

This cabinet is well suited to mid-sized catering operations: restaurants, hotels, contract caterers, and event venues where holding capacity across a full service is a regular requirement. For very high-volume sites needing greater capacity, larger-format holding cabinets are available in the range. For smaller operations with limited holding needs, a lower-capacity unit may be a more proportionate fit.

If you are unsure whether the 750-S matches your service volumes or workflow, our team is happy to talk it through before you commit.

The Alto-Shaam 500-S is a countertop or standalone holding cabinet designed to keep prepared food at a safe, consistent serving temperature for extended periods. Built in stainless steel, it is a compact and practical unit suited to kitchens that need reliable food holding without the risk of overcooking or moisture loss during service.

The cabinet uses Alto-Shaam's proprietary Halo Heat technology, which works by generating a gentle, uniform heat that surrounds the food rather than blasting it with a fan or element. In practice, this means proteins retain moisture and shrinkage is noticeably reduced compared with conventional holding methods. Kitchens running a busy carvery, banqueting service, or high-volume hot counter will recognise the difference — food held for two hours still presents well, which is not always the case with alternatives.

From an operational standpoint, the key advantages are straightforward:

• Food can be prepared well ahead of service and held safely without deteriorating
• Reduced shrinkage and moisture loss helps control portioning costs and reduces waste
• The digital thermostat allows precise temperature monitoring without guesswork
• Shelves are removable, making cleaning between services quick and straightforward
• Consistent hold temperatures support HACCP compliance and food safety records

The 500-S is an electrically powered unit, so installation is straightforward — no gas or water connection is required. At 50kg it is manageable to position, though its footprint and door clearance should be considered in tighter back-of-house spaces before purchasing. It accepts up to six 1/1 GN pans at 65mm depth, which makes it well suited to operations running a standard GN-based workflow.

This cabinet is a practical choice for cafeterias, hotel kitchens, contract caterers, and busy pub kitchens where consistent food quality across a service period matters. It is best suited to mid-volume operations. For larger banqueting kitchens or sites requiring significantly greater holding capacity, a larger model would be worth considering instead.

If you are weighing up whether this cabinet fits your service volume and kitchen layout, the team is happy to talk it through with you before you commit.

The Alto-Shaam 300-S is a countertop food holding cabinet designed to keep prepared dishes at safe serving temperatures for extended periods without degrading quality. It uses Alto-Shaam's proprietary Halo Heat technology — a low-wattage radiant heat system built into the cabinet walls — to create a gentle, uniform heat environment around the food rather than relying on a fan or element blasting hot air. The result is consistent temperature throughout the cabinet without the moisture loss, surface drying, or overcooking that conventional hot-holding equipment can cause.

In a working kitchen, the practical value of this becomes clear during service. Dishes prepared in advance can be held for several hours without the deterioration that typically forces kitchens to cook in smaller, more frequent batches. Proteins retain more of their weight and texture, and presentation quality holds up closer to service time. The cabinet accommodates three full 1/1 GN pans at 65mm depth, making it a practical option for operations running a moderate number of covers or holding a limited number of menu items simultaneously.

Key operational advantages include:

• Consistent temperature throughout the cabinet, reducing hot and cold spots
• Reduced food shrinkage and moisture loss compared to fan-assisted holding
• Digital thermostat display for accurate temperature monitoring and food safety compliance
• Simple shelf removal for straightforward daily cleaning
• Compact footprint suitable for counter or pass placement

The 300-S runs on standard single-phase power and is a self-contained unit with no water connection or ventilation requirements, which keeps installation straightforward. At 29kg it is manageable to position but substantial enough to sit securely on a counter or a dedicated stand. The stainless steel construction is well suited to commercial kitchen environments.

This unit is well suited to cafés, pub kitchens, contract catering operations, and smaller restaurant kitchens where consistent hot-holding across a handful of dishes is a priority. For sites running significantly higher volumes or needing to hold a broader range of GN configurations simultaneously, it is worth considering a larger-capacity model from the Alto-Shaam holding range.

If you are unsure whether this capacity suits your service style or covers, we are happy to talk through the options before you commit.