Amefa Bead

The Amefa Bead teaspoon is a straightforward, well-made piece of catering cutlery suited to everyday table service. Finished in mirror-polished 18/10 stainless steel with a classic beaded border running along the handle, it presents tidily across a range of covers without drawing attention to itself — which is generally what you want from teaspoons in a busy service environment.

18/10 stainless steel is a reliable choice for commercial cutlery. The higher nickel content gives it good resistance to corrosion and staining, and it holds its finish reasonably well through repeated dishwasher cycles — an important practical consideration when teaspoons are being turned around multiple times across a service.

• Mirror-polished finish suitable for front-of-house table settings
• Beaded handle border adds a traditional decorative detail
• Dishwasher safe for high-turnover service environments
• Sold in packs of 12, making stock management straightforward

Teaspoons take more wear than most cutlery — they go through the wash more frequently, get used for stirring hot drinks, and have a habit of going missing. Buying in dozens makes it easier to maintain consistent cover counts without placing frequent small orders. This pattern is well suited to cafés, hotel breakfast service, restaurants, and any operation serving hot beverages at volume.

If you're setting up a new operation or reviewing your cutlery stock more broadly, it's worth thinking through your full cover count and anticipated replacement rate before ordering. The team is happy to help you work through quantities if that would be useful.

The Amefa Bead soup spoon is a straightforward, well-finished piece of catering cutlery suited to everyday front-of-house service. Made from 18/10 stainless steel with a mirror finish, it carries a beaded border detail along the handle that gives it a slightly more considered appearance than plain flatware, without moving into formal or decorative territory.

In practical terms, 18/10 stainless steel is a reliable choice for commercial environments. The higher nickel content contributes to corrosion resistance and helps the finish hold up through repeated dishwasher cycles, which matters when cutlery is turning over multiple times per service. It is the grade commonly used across mid-range catering flatware for good reason.

• Mirror finish presents well on the table with minimal buffing
• Beaded handle detail suits casual dining, bistro, and brasserie settings
• Dishwasher safe — suitable for high-frequency wash cycles
• Sold in dozens, making stock management straightforward
• 18/10 stainless steel resists staining and holds finish over time

This spoon is well suited to soup service in restaurants, hotels, pub dining rooms, and contract catering operations. It sits comfortably in the mid-range of commercial cutlery — appropriate where presentation matters but a premium range is not required. For operations running a more formal table setting or higher-end dining, a heavier gauge or more elaborate pattern may be worth considering.

If you are putting together a full cutlery complement or matching across a range, our team are happy to help you work through the options.

The Amefa Bead dessert spoon is a straightforward piece of 18/10 stainless steel cutlery finished to a mirror polish, with a classic beaded border running along the handle. It is a practical, mid-weight option suited to everyday dessert and pudding service in restaurants, hotels, cafés, and contract catering operations.

18/10 stainless steel is a reliable choice for commercial cutlery — the higher nickel content gives it good resistance to tarnishing and corrosion, which matters when pieces are going through a commercial dishwasher repeatedly over a long service life. The mirror finish holds up well under regular machine washing provided standard cutlery care is followed, including prompt removal from the wash cycle and avoiding prolonged contact with acidic or saline residues.

• Dishwasher safe for high-turnover service environments
• Mirror-polish finish presents well on a laid cover
• Beaded handle detail suits both traditional and contemporary table settings
• 18/10 grade resists tarnishing under repeated commercial washing

Sold in packs of twelve, which works well for topping up existing stocks or outfitting smaller operations. For larger openings or high-volume banqueting, it is worth considering how many covers you need to service between washes and ordering accordingly.

If you are building out a full cutlery range or need guidance on quantities for a new opening, the team is happy to help you work through the numbers.

The Amefa Bead dessert fork is a straightforward, well-made piece of catering cutlery produced in 18/10 stainless steel with a mirror finish. The handle features a classic beaded border detail that gives the range a traditional, formal appearance without being overly ornate — a style that tends to sit comfortably across a wide range of covers, from casual dining to more traditional table settings.

In day-to-day service, 18/10 stainless steel performs reliably under the repeated thermal and mechanical stress of commercial dishwashing. The higher chromium and nickel content in this grade resists tarnishing and surface corrosion over time, which is a practical consideration when cutlery is being turned around multiple times across a busy service. The mirror finish does show water marks more readily than a satin alternative, so a good drying and polishing routine will keep presentation consistent.

Sold in packs of twelve, this format suits operators looking to top up existing Bead pattern stock or build cover counts incrementally. Key practical points worth noting:

• Mirror-finish 18/10 stainless steel — resistant to tarnishing with regular commercial use
• Beaded handle border — traditional styling compatible with formal and casual settings
• Dishwasher safe — suitable for high-frequency commercial washing cycles
• Sold in dozens — practical purchasing unit for most catering operations
• Consistent weight and finish — supports a uniform table setting across the range

If you're building a full table setting around the Bead pattern or need guidance on cover quantities for your service volume, the team is happy to help work through what you need.

The Amefa Bead table fork is a straightforward, well-made piece of catering cutlery finished in mirror-polished 18/10 stainless steel. The handle features a classic beaded border detail, giving it a traditional appearance that sits comfortably in a wide range of restaurant and hospitality settings without looking out of place on either a casual dining table or a more formally set cover.

In day-to-day service, 18/10 stainless steel holds up well to repeated commercial dishwasher cycles. The higher nickel content in the alloy gives the finish better resistance to tarnishing and surface corrosion over time compared with lower-grade steel, which matters when pieces are being run through a glasswasher or dishwasher multiple times per shift. The mirror finish does show water marks if pieces are not dried or polished promptly after washing, which is worth bearing in mind for front-of-house presentation.

• Classic beaded handle detail suits traditional and contemporary table settings
• Mirror finish polishes up well for formal covers
• Dishwasher safe for high-turnover service environments
• Sold in packs of 12, practical for topping up existing stocks

This fork is well suited to restaurants, hotels, pub dining rooms, and contract catering operations looking for reliable everyday cutlery at a sensible price point. For operations running very high covers or requiring a heavier weight and balance in the hand, it is worth considering a heavier-gauge pattern from elsewhere in the range.

If you are looking to outfit a full table setting or match this pattern across a larger cover count, our team is happy to advise on quantities and complementary pieces.

The Amefa Bead table knife is a straightforward, well-made piece of cutlery finished in mirror-polished 18/10 stainless steel. The handle features a classic beaded border — a traditional decorative detail that has remained popular in restaurant and hotel table settings for many years. Sold in packs of 12, it is practical to order in the quantities a commercial operation actually needs.

In everyday service, 18/10 stainless steel holds up well to repeated dishwasher cycles without dulling or corroding. The mirror finish presents cleanly on the table and is straightforward to inspect between covers. For busy front-of-house teams, having cutlery that comes out of the glasswasher or dishwasher looking consistent is a small but practical advantage during a fast turnaround.

• Mirror-polished finish presents well on table and is easy to inspect for cleanliness
• 18/10 stainless steel construction resists corrosion through repeated dishwasher cycles
• Classic beaded handle suits traditional and formal dining settings
• Sold in packs of 12 to match practical ordering quantities
• Dishwasher safe for straightforward integration into existing kitchen workflows

This pattern sits comfortably in restaurants, hotels, pub dining rooms, and catering operations where a traditional handle style is appropriate. It is a mid-range pattern — operations requiring something more substantial for very high-cycle environments may find heavier-gauge alternatives worth considering.

If you are outfitting a new dining room or matching an existing pattern, we are happy to help you work out the right quantities and whether this pattern is the right fit for your setting.