Amefa Harley

The Amefa Harley teaspoon is a commercial-grade teaspoon finished in mirror-polish 18/10 stainless steel. The pattern features clean, graphic lines that give it a defined look without veering into ornate or overly formal territory — a practical middle ground that works across a range of hospitality settings.

In day-to-day service, teaspoons are among the highest-turnover pieces of cutlery in any operation. The Harley's 18/10 stainless steel construction is resistant to staining and corrosion, and holds up well through repeated commercial dishwasher cycles without dulling or pitting prematurely. The mirror finish is straightforward to maintain and presents well on the table without requiring special handling.

• Dishwasher safe — suitable for commercial warewashing equipment
• 18/10 stainless steel resists staining and everyday corrosion
• Mirror finish maintains a clean, presentable appearance in service
• Sold in packs of 12, practical for stock management and replacement ordering

This teaspoon is well suited to cafés, restaurants, hotels, and contract catering operations looking for reliable everyday cutlery that doesn't draw attention to itself in either direction. It sits comfortably in the mid-range of the Amefa catalogue — if you're running a high-volume operation and need to order in bulk quantities, or if you're looking for a heavier or more premium pattern, there are other options in the range worth considering.

If you're building out a full cutlery range or need guidance on quantities for your covers, we're happy to help you work through it.

The Amefa Harley soup spoon is a straightforward, well-made piece of commercial cutlery in 18/10 stainless steel with a mirror finish. The Harley range has a clean, graphic line to it — not ornate, but not plain either — which tends to sit comfortably across a range of front-of-house settings without looking out of place.

In everyday service, 18/10 stainless steel holds up well. The higher nickel content gives it better resistance to corrosion and discolouration over time compared to lower-grade alloys, which matters when cutlery is going through a commercial dishwasher multiple times a day. The mirror finish is straightforward to polish if needed and doesn't show surface marks as readily as brushed alternatives.

• 18/10 stainless steel construction for durability and corrosion resistance
• Mirror finish — presentable across casual dining and more formal settings
• Dishwasher safe for high-frequency commercial wash cycles
• Sold in packs of 12, practical for topping up existing stock
• Consistent pattern design across the Harley range for a matched table set

This spoon is well suited to cafés, pubs, staff restaurants, hotels, and mid-market dining operations looking for reliable everyday cutlery that doesn't require careful handling. It isn't a premium silversmith-weight piece, so operators running a fine dining cover may want to consider a heavier-gauge option from elsewhere in the range.

If you're building out a full table setting or unsure how many covers a pack of 12 will realistically cover in service, the team is happy to help you work through quantities.

The Amefa Harley dessert spoon is a mirror-finished 18/10 stainless steel spoon with a clean, graphic profile that sits comfortably in most commercial table settings. The Harley range has a defined, contemporary look without leaning heavily into any particular trend, which tends to give it reasonable longevity in a cover setting.

18/10 stainless steel is the standard grade used across quality catering cutlery — the higher nickel content relative to 18/0 supports better corrosion resistance and helps the mirror finish hold up through repeated commercial dishwasher cycles. For sites running high-volume covers, that durability through daily washing matters more than aesthetics.

• Mirror finish with a structured, graphic line — works across a range of table settings
• 18/10 grade for good corrosion resistance under regular dishwasher use
• Dishwasher safe — suitable for commercial glasswasher and dishwasher cycles
• Sold in packs of 12, making it practical to top up existing Harley stock

As with any commercial cutlery purchase, it is worth considering your full cover count and replacement cycle before ordering. Operators running larger dining rooms or high-turnover services may want to assess pack quantities carefully to avoid frequent reorders. The Harley range extends across multiple cutlery pieces, so building a consistent set is straightforward.

If you are equipping a new site or refreshing an existing cutlery stock and want a steer on quantities or range compatibility, we are happy to help you work through it.

The Amefa Harley dessert fork is a mid-weight piece of flatware finished in mirror-polished 18/10 stainless steel. The design uses strong, clean graphic lines that give it a defined character without veering into overly contemporary or ornate territory — a practical choice for operators who want a consistent table setting that holds up over time.

Made from 18/10 stainless steel, the Harley range offers a reasonable level of corrosion resistance for everyday commercial use. The mirror finish is well suited to front-of-house environments where presentation matters, and the proportions are conventional enough to sit alongside a range of other flatware patterns without looking out of place.

• Mirror-polished finish suitable for restaurant and hotel table settings
• 18/10 stainless steel construction for everyday commercial use
• Dishwasher safe, supporting standard warewashing cycles
• Sold in packs of 12, simplifying stock ordering
• Consistent pattern design across the Harley range

As with any mirror-finish cutlery in a busy operation, regular polishing and correct dishwasher loading will help maintain appearance over time. Hard water areas may require additional attention to water spotting.

The Harley dessert fork is well suited to mid-market restaurants, hotel dining rooms, and catering operations where a clean, traditional profile is preferred. For very high-volume covers or more formal settings, a heavier-gauge pattern may be worth considering.

If you are building out a full place setting or need advice on quantities for your covers, the team is happy to help you work through what you need.

The Amefa Harley table fork is a mirror-finish 18/10 stainless steel fork sold in packs of 12, making it a practical choice for operators looking to stock or top up a commercial cutlery set. The Harley pattern features clean, graphic lines that give it a contemporary feel without being trend-led — the kind of design that sits comfortably in a broad range of dining environments without dating quickly.

In a commercial setting, cutlery takes a great deal of daily handling, stacking, and machine washing. The 18/10 stainless steel grade is well suited to this kind of continuous use — it holds its finish reliably through repeated dishwasher cycles and resists the spotting and discolouration that lower-grade alloys can develop over time. This makes it a sensible choice for operators who need cutlery that presents consistently across service.

• Mirror finish presents well across casual and formal dining settings
• 18/10 stainless steel resists tarnishing through regular dishwasher cycles
• Sold in packs of 12, practical for bulk stocking or replacements
• Dishwasher safe for straightforward back-of-house handling

For smaller operations or those trialling a new pattern, a 12-pack allows for a measured initial order. Higher-volume sites covering multiple sittings may want to consider ordering in greater quantity to maintain cover counts comfortably through a busy service.

If you're building out a full place setting or matching this to other Harley pattern pieces, the team is happy to help you work out the right quantities for your covers.

The Amefa Harley table knife is a mid-weight, mirror-finish cutlery piece produced in 18/10 stainless steel. It forms part of the broader Harley range, which follows a clean, graphic design profile that sits comfortably across casual dining, bistro, and more formal restaurant settings without looking out of place in either.

In day-to-day service, 18/10 stainless steel is a reliable specification for commercial cutlery. The higher nickel content gives it better resistance to tarnishing and surface staining compared to lower-grade alloys, which matters in kitchens where cutlery goes through a commercial dishwasher multiple times a day. The mirror finish holds up reasonably well to repeated wash cycles, though like all polished cutlery it benefits from prompt removal from the dishwasher to avoid water spotting.

• Mirror-polished 18/10 stainless steel resists tarnishing under regular commercial use
• Dishwasher safe — suitable for high-frequency commercial wash cycles
• Consistent weight and finish across the Harley range, aiding uniform table presentation
• Sold in packs of 12, practical for topping up existing covers

The Harley range is well suited to restaurants, hotels, and catering operations that want a dependable everyday cutlery pattern without committing to a heavy-gauge premium line. It is not a heavy banqueting-weight knife, so operators running formal dining covers may want to consider a heavier specification. For high-turnover casual dining, canteen, or bistro environments, it is a practical and cost-effective choice.

If you are building out a full place setting or matching to existing Harley pieces, it is worth speaking with us to confirm range compatibility and pack quantities before ordering.