Amefa Jewel

The Amefa Jewel teaspoon is a heavy-gauge 18/10 stainless steel teaspoon with a distinctive diamond-textured handle. It sits comfortably in the hand, carries a solid feel without being heavy, and presents well on both casual and more formal table settings. The mirror-polished finish gives a clean, consistent look across a set.

In service, these teaspoons perform reliably under the repetitive handling that comes with busy café, restaurant, or hotel breakfast trade. The 18/10 grade resists staining and corrosion well, and the substantial gauge means they hold their shape through repeated commercial dishwasher cycles without the flex or lightness you get with lower-grade flatware. The textured handle also helps maintain their appearance over time, as minor surface marks are less visible than on a plain-polished design.

Practical points worth noting:

• 18/10 stainless steel construction resists staining and holds up well through commercial dishwashing
• Heavy-gauge build reduces flex and distortion under repeated daily use
• Diamond-pattern handle provides grip and disguises handling marks over time
• Mirror-polished finish presents consistently across a matched set
• Supplied in a pack of 12, suitable for building stock in stages

A pack of 12 is a practical starting point for smaller operations or for supplementing existing stock. Operators running higher-volume covers may want to consider ordering in greater quantity to maintain a working float through washing cycles.

If you are furnishing a full dining room or matching to an existing flatware range, it is worth getting in touch — we can help you work out quantities and check availability across the Amefa Jewel range.

The Amefa Jewel soup spoon is a heavy-gauge stainless steel spoon designed for front-of-house use in restaurants, hotels, and other hospitality operations where table presentation matters. The handle features a diamond-inspired textured pattern with a mirror-polished finish, giving the cutlery a considered, formal appearance without veering into ornate or fussy territory. Supplied in packs of twelve, it is a practical quantity for topping up existing stock or fitting out a section.

Made from 18/10 stainless steel at a 3.0mm gauge, these spoons carry a solid weight in the hand that reads well at the table — substantial enough to feel quality-made, without being unwieldy for guests. The mirror finish holds up well through regular commercial dishwasher cycles, though as with all polished cutlery, keeping on top of water spotting during the drying stage will help maintain appearance over time.

• Dishwasher safe for high-turnover service environments
• Textured diamond-pattern handle adds visual interest to formal covers
• Heavy-gauge construction resists bending under normal service conditions
• Mirror-polished finish presents well on both formal and contemporary table settings

This pattern suits operations looking for a step up from entry-level cutlery without committing to a premium price point. It works well across restaurant dining rooms, hotel restaurants, and event catering where a consistent, presentable cover is expected. If you are fitting out a larger operation or need guidance on quantities, the team is happy to talk it through.

The Amefa Jewel dessert fork is a mid-weight stainless steel fork designed for restaurant and hospitality table settings where presentation matters. The handle features a faceted, diamond-inspired texture that gives the piece a distinctive appearance without being overly ornate — it reads well on a laid table without drawing attention away from the food.

Made from 18/10 stainless steel at a 3.0mm gauge, these forks carry a solid feel in the hand. The heavier gauge resists the flexing and bending that lighter-gauge cutlery suffers under the repeated handling of busy service, and the mirror-polished finish holds up well through regular commercial dishwashing cycles without dulling quickly.

Practical points worth knowing:

• Dishwasher safe and suitable for high-cycle commercial warewashers
• Mirror finish responds well to standard cutlery polish and drying routines
• The textured handle pattern can trap residue — a jet-wash cycle is advisable rather than a short rinse programme
• Supplied in a pack of 12, which suits topping up existing covers or trialling the range

The Jewel range is well suited to mid-to-upper casual dining restaurants, hotel restaurants, and private dining settings where a more considered table presentation is expected. It is less likely to be the right choice for high-turnover canteen or contract catering environments, where a plainer, more utilitarian pattern tends to be more practical to maintain at volume.

If you are looking to outfit a full cover count or match the Jewel fork to other pieces in the range, the team is happy to talk through quantities and pattern coordination before you order.

The Amefa Jewel dessert knife is a patterned-handle cutlery piece from Amefa's Jewel range, made from 18/10 stainless steel with a mirror-polished finish. The handle features a diamond-inspired texture that gives the piece a degree of visual weight without being ornate — suitable for formal dining settings where presentation matters but practical durability remains a priority.

In everyday service use, 18/10 stainless steel at this gauge holds up well to repeated dishwasher cycles, resists staining and corrosion, and maintains its finish over time without the tarnishing that can affect lighter-gauge cutlery in high-turnover environments. The heavier construction also gives the knife a balanced feel in the hand, which tends to read better to guests than thin, lightweight alternatives.

• 18/10 stainless steel construction resists corrosion and staining
• Mirror-polished finish suits formal and smart-casual table settings
• Diamond-pattern handle adds visual interest without heavy styling
• Dishwasher safe for straightforward daily cleaning routines
• Sold in a pack of 12 — practical for initial stock or topping up existing sets

The Jewel range is well suited to restaurants, hotels, and event caterers looking for a presentable mid-range cutlery option. It sits comfortably between basic catering-grade flatware and high-end silverware, making it a practical choice where appearance is important but replacement costs need to stay reasonable. If you're equipping a larger operation or need guidance on quantities across a full cutlery range, we're happy to help work through the options.

The Amefa Jewel serving spoon is a heavy-gauge 18/10 stainless steel serving piece finished with a faceted, diamond-textured handle and a mirror-polished bowl. The pattern is subtle rather than decorative for its own sake — it gives the spoon a solid, considered look that sits comfortably on a formally laid table without appearing fussy.

In practice, 18/10 stainless steel at a 3.0mm gauge holds up well to the daily demands of commercial service. The spoons pass through commercial dishwashers repeatedly without losing their finish, and the weight distribution means they sit steadily on a service counter or buffet station rather than tipping easily. For front-of-house use at a restaurant, hotel, or catering event, these are a practical choice that presents well without requiring careful handling.

• Heavy-gauge 18/10 stainless steel resists distortion and staining over time
• Mirror-polished finish maintains appearance through regular dishwasher cycles
• Balanced weight suits both table service and buffet station use
• Faceted handle provides a secure grip during service
• Supplied in a pack of 12, practical for full table covers or buffet replenishment stock

These spoons are well suited to restaurants, hotels, banqueting operations, and contract caterers who need a consistent, presentable serving piece across multiple covers. They are not a budget line, but they are also not priced for occasional use — the construction is aimed at regular, high-frequency service environments where durability matters as much as appearance.

If you are specifying cutlery across a full front-of-house operation or need to match serving pieces to an existing range, our team is happy to talk through the options.

The Amefa Jewel table knife is a mid-to-premium weight cutlery piece designed for restaurant and hospitality table settings where presentation matters alongside everyday practicality. The handle carries a diamond-inspired textured pattern that gives the range its name, with a mirror-polished finish across the blade that holds up well under regular commercial use.

Made from 18/10 stainless steel with a 3.0mm gauge, the Jewel knife has a solid feel in the hand — substantial enough to read as quality to a guest, without being unwieldy. The heavier gauge also means it resists the bending and distortion that thinner cutlery can suffer in busy dishwasher cycles over time.

For day-to-day service operations, the practical advantages are straightforward:

• Dishwasher safe, supporting fast turnaround between covers
• Mirror polish resists staining and maintains appearance with standard commercial warewasher chemistry
• Consistent weight and balance across the range aids uniform table laying
• Sold in packs of 12, making top-up ordering straightforward as attrition occurs

This pattern is well suited to mid-market restaurants, hotel dining rooms, gastro pubs, and event catering operations where a step up from plain bistro cutlery is appropriate but a bespoke or silver-service grade item is not required. For very high-volume operations where cutlery losses are significant, it is worth considering whether a plainer, higher-attrition pattern makes more operational sense.

If you are kitting out a full table setting or want to confirm the Jewel range works alongside other Amefa patterns you already hold, our team is happy to help you check compatibility before you order.