Bain Marie Accessories

This is a genuine replacement handle for Buffalo mobile bain marie trolleys, compatible with the two-pan and three-pan versions of the Buffalo trolley range. If the original handle has become damaged or worn through regular service use, this part allows the trolley to be returned to safe working condition without replacing the unit itself.

Handles on mobile bain marie trolleys take considerable wear in a busy kitchen environment — repeated movement across service areas, contact with heat, and daily cleaning all contribute to wear over time. Having the correct replacement part to hand avoids unnecessary downtime.

If you are unsure whether this handle is compatible with your specific trolley model, or if you need further guidance on spare parts for your Buffalo equipment, it is worth getting in touch before ordering.

This water tray is a replacement accessory designed for use with compatible Buffalo bain marie units, including the GF454, GF455, DC858, and DC859 models. It sits within the bain marie housing and holds water to create the indirect heat environment needed to keep food at safe serving temperatures during service.

If you are unsure whether this tray is the correct fit for your unit, or if you need guidance on compatible accessories for your bain marie setup, our team is happy to help you confirm before you order.

This is the replacement round pot designed for use with the Buffalo bain marie units FT695 and S077. It is intended as a direct-fit accessory, allowing operators to replace a worn or damaged pot without needing to source a non-compatible alternative or replace the entire unit.

In a busy service environment, having a correctly fitting pot matters more than it might seem. An ill-fitting insert can affect heat transfer, create instability on the line, and slow down service. Using the manufacturer-matched pot avoids those issues and keeps the bain marie performing as intended.

If you are unsure whether this pot is the right fit for your existing unit, or if you need to replace additional accessories alongside it, it is worth speaking with the team before ordering to make sure you get exactly what your setup requires.

This is a genuine Buffalo replacement tray slide assembly, designed specifically for the Buffalo Mobile Bain Marie Trolley (JB984). It replaces the original slide mechanism that supports and positions the 1/1 GN trays within the unit, restoring the trolley to its intended working condition.

In a busy service environment, tray slides take repeated daily handling and are one of the more common wear components on a mobile bain marie. Having a direct replacement to hand means you can swap out a damaged or worn part quickly rather than taking the unit out of service while you source parts.

• Genuine Buffalo part — confirmed fit for the JB984 trolley
• Restores correct tray positioning and support
• Straightforward like-for-like swap, no modification needed
• Helps maintain safe, stable GN tray seating during service

This part is only compatible with the Buffalo JB984 Mobile Bain Marie Trolley. It is not a universal fitting and will not suit other bain marie models, including other units within the Buffalo range. If you are unsure whether this matches your trolley, it is worth checking the model number on your unit before ordering.

If you have questions about compatibility or need help identifying the correct part for your bain marie, we are happy to help — just get in touch before placing your order.

This is a replacement water pan designed for use with compatible Buffalo bain marie units. The water pan sits within the bain marie housing and holds the water that transfers heat evenly to the food pans above, keeping held food at safe serving temperatures throughout service.

In a busy kitchen environment, water pans take a considerable amount of wear — mineral scale build-up, thermal stress, and daily cleaning all take their toll over time. Having a direct replacement available from the original equipment manufacturer helps maintain the bain marie's performance without the need to source a generic alternative that may not fit correctly or perform as intended.

If you are unsure whether this pan is compatible with your specific Buffalo bain marie model, it is worth checking your unit's model number against the compatible references before ordering. Our team is happy to help confirm the correct part if you are not certain.

This is the replacement internal aluminium container for the Buffalo Heat and Hold Soup Kettle (model HT759). It sits inside the outer stainless steel housing and acts as the direct vessel for soups, sauces, or other hot-hold liquids during service.

Having a spare container on hand is a practical consideration for any operation running the HT759 through continuous service periods. It allows the container to be removed, cleaned thoroughly, and swapped back into use without taking the unit out of service — a straightforward advantage when turnaround time between services is tight.

As a manufacturer-matched part, it is designed to fit the HT759 correctly. If you are unsure whether this container is compatible with your specific unit, or if you are looking for accessories or replacement parts for a different Buffalo soup kettle model, it is worth getting in touch before ordering to confirm the correct fit.

This is the dedicated lid for the Hatco Heat-Max RHW 10 litre bain marie pan. It is a replacement or spare part intended specifically for use with the corresponding RHW pan, and is sold separately from the pan itself.

In a busy service environment, keeping a lid on holding pans makes a practical difference. It slows moisture evaporation, helps maintain consistent food temperatures between replenishments, and reduces the workload on the bain marie unit itself. For operations running extended service periods or holding sauces, soups, and gravies across multiple hours, having a correctly fitted lid rather than an improvised cover is the more reliable approach.

A few practical points worth noting before ordering:

• This lid is designed to fit the Hatco RHW 10 litre pan specifically — confirm your pan model before purchasing
• The pan is not included; this listing covers the lid only
• Buying a spare lid alongside your pan is worth considering to allow for cleaning rotation during service

This item suits any operation already running the Hatco Heat-Max RHW bain marie system who needs a replacement lid or an additional cover for service flexibility. It is not a universal-fit accessory and should not be assumed compatible with other pan sizes or brands without verification.

If you are unsure whether this lid matches your existing equipment, or you are specifying a new bain marie setup and want to confirm the right combination of pan and accessories, the team is happy to help you work through it.

The Hatco RHW-11QT-POT is a 10-litre replacement pan designed specifically for use with the Hatco RHW Heat-Max hot liquid warmer. If your existing pan has become damaged, stained beyond practical use, or is simply due for renewal as part of routine maintenance, this is the correct vessel to return the unit to full working order — without the cost or disruption of replacing the appliance itself.

Liquid warmers in busy service environments take consistent daily punishment: repeated heating cycles, caustic cleaning agents, and the occasional knock on a congested pass or counter. Having the correct replacement pan to hand means a worn or damaged vessel does not take the unit out of service mid-shift. The 10-litre capacity is well suited to holding soup, sauce, gravy, or hot beverages at service temperature across an extended period.

A few practical points worth confirming before ordering:

• This pan is sold without a lid — if a replacement lid is also required, it will need to be sourced separately
• It is designed specifically for the Hatco RHW Heat-Max range — confirm your unit model before ordering to ensure a correct fit
• It is a replacement part, not a standalone vessel — a compatible base unit is required for operation

This pan is most relevant to sites already running the Hatco RHW Heat-Max warmer. If you are setting up a hot liquid holding solution from scratch, it is worth considering the complete unit rather than the pan in isolation.

If you need help confirming compatibility with your existing Hatco equipment, the team is happy to check before you place an order.