Beer Dispensers

The Polar G-Series Direct Draw Double Keg Beer Dispenser is a self-contained draught dispense unit designed to serve chilled beer, cider, or ale directly from two half-size barrel kegs without the need for a remote cellar or dedicated cooling room. The unit houses the cooling system and the kegs within the same cabinet, making it a practical option for venues that need to offer draught drinks from a compact, freestanding footprint.

In a busy bar or event setting, consistent temperature control is essential for product quality and customer satisfaction. The G-Series uses a forced-air cooling system to bring keg contents down to the target serving temperature efficiently, and the digital control panel allows straightforward temperature adjustment without the guesswork that comes with analogue dials. During peak service periods, the cooling system maintains stable conditions across both kegs rather than recovering slowly between rounds.

From an operational standpoint, this unit suits a range of settings where a traditional cellar arrangement is impractical or unavailable:

• Serves two separate keg lines simultaneously from one unit
• Digital temperature control for accurate, repeatable serving conditions
• Stainless steel construction for durability and straightforward cleaning
• Forced-air cooling system for efficient temperature recovery under service load
• Supplied with beer tap, CO2 line, CO2 tee joint, and Type A keg connector included

Installation requires a standard mains electrical supply and adequate ventilation around the cabinet to allow the cooling system to operate correctly. The unit weighs 97kg when empty, so floor loading and access routes should be considered before delivery, particularly for upper-floor venues or event spaces. A pressure regulator and dispensing gas are not included and will need to be sourced separately. Polar recommend that installation and gas line connection are carried out by a qualified person — this is not a plug-and-pour unit out of the box.

This dispenser is well suited to small bars, pop-up venues, golf clubs, function rooms, and event catering operations where draught capability is needed without a full cellar infrastructure. It is designed to run two product lines, so it works well where a limited draught range is offered alongside other beverage options. For higher-volume sites serving multiple products simultaneously or requiring larger keg formats, a heavier-duty solution with greater capacity would be worth considering.

If you are unsure whether this unit fits your setup — particularly around gas supply, ventilation, or keg sizing — the team is happy to talk it through before you commit to an order.

The Polar G-Series direct draw keg beer dispenser is a self-contained unit designed to chill and serve draught beer, cider, ale, or other carbonated keg drinks without the need for a dedicated cellar or remote cooling system. It accepts a half-size barrel keg and connects directly to a CO2 supply, making it a practical option for venues that want to offer draught drinks from a compact, standalone setup.

The unit uses a forced-air cooling system to bring the keg contents down to the desired serving temperature and maintain it through service. A front-mounted digital control panel allows straightforward temperature adjustment without separate thermometers or dial-based guesswork, which matters during a busy shift when consistency is important. The stainless steel cabinet is built to Polar's G-Series commercial standard, which is rated for frequent, everyday use in demanding environments.

From an operational standpoint, this dispenser suits venues that need flexibility — event catering, pop-up bars, smaller licensed premises, or any site where installing a full cellar cooling system isn't practical or cost-effective. Key practical points include:

• Supplied with beer tap, CO2 line, CO2 tee joint, and Type A keg connector
• Pressure regulator and dispensing gas are not included and must be sourced separately
• Installation and gas line setup should be carried out by a qualified person
• Designed for indoor use in climate class 4 environments

This is a single-tap, single-keg unit, which suits lower to moderate draught volume. For venues serving draught drinks as a primary revenue line or running multiple taps continuously, a higher-capacity solution would be worth considering.

If you're unsure whether this unit fits your service setup, or if you have questions about CO2 requirements and compatibility with your existing bar, the team is happy to talk it through before you commit.

The Gamko FK MU is a plug-ready refrigeration machine unit designed to work within a modular kegerator setup. Rather than a standalone cooler, this is the refrigeration component — intended to be paired with a compatible Gamko keg column or enclosure to deliver reliable keg cooling at point of dispense. It uses R600a refrigerant, which has a very low global warming potential and is commonly specified in modern commercial refrigeration for its efficiency characteristics.

In practice, this type of unit is used behind the bar or in a cellar-adjacent position to pre-chill kegs before they reach the tap. Consistent pre-chilling reduces the load on a remote cooler or python system and helps maintain pour quality through a busy service period. Because the unit is modular, it can slot into an existing Gamko keg cooling configuration rather than requiring a complete new installation.

From an operational standpoint, the key advantages are straightforward:

• Plug-ready connection keeps installation straightforward for compatible Gamko setups
• R600a refrigerant offers low environmental impact and efficient running
• Compact footprint suits tight bar back or cellar installations
• Modular design allows integration with wider Gamko kegerator systems
• Suitable for kegs, crates, or bottled drinks depending on configuration

Because this is a machine unit rather than a complete self-contained cooler, it is important to confirm compatibility with your existing Gamko enclosure or column before ordering. The unit is not intended as a standalone solution. For sites with higher keg throughput or multiple tap lines, a higher-capacity configuration may be more appropriate.

If you are unsure whether this unit fits your current setup, or if you are speccing a new keg cooling system from scratch, it is worth a conversation with us before committing — getting the pairing right first time avoids unnecessary work on installation day.

The Gamko FK2-25/4R is a single solid door keg cooler designed to hold and chill kegs at consistent serving temperatures in commercial bar and pub environments. Right hinged as standard, it is built to slot into bar back or cellar configurations where space and door swing direction matter. The 191-litre interior is sized to accommodate a practical number of kegs for ongoing service without constant restocking.

In a working bar, keg coolers need to maintain stable temperatures throughout service — not just when the unit is freshly loaded. The FK2-25/4R is built for that kind of continuous duty. The solid door helps maintain the internal temperature more efficiently than glass-door alternatives, which is a practical advantage in warmer back-bar environments or where the unit is accessed frequently during a busy shift.

A few things that make this unit practical in day-to-day operation:

• Solid door construction supports more consistent temperature retention during high-access periods
• Right-hinged door allows flexible placement within existing bar layouts
• Uses R600a refrigerant, which carries a very low global warming potential — relevant for operators mindful of environmental compliance
• Straightforward interior layout makes loading and rotating stock easier during service
• Robust Gamko build quality suited to the demands of continuous commercial use

Installation is relatively straightforward, but it is worth confirming available floor space and door clearance before ordering — the unit weighs 67kg and measures 860mm high by 880mm wide by 567mm deep, so access routes and final positioning should be planned ahead of delivery. Standard electrical connection is required; no specialist services beyond that.

This cooler is well suited to pubs, bars, and licensed venues with moderate keg throughput. For very high-volume sites or operations running a large number of lines simultaneously, a higher-capacity unit may be worth considering. Similarly, if a left-hinged or glass-door configuration better suits your layout, alternative options are available in the range.

If you are unsure whether this model fits your bar layout or keg volume, our team is happy to talk it through with you before you commit to an order.

The Gamko FK2-25 8R is a double door keg cooler designed to store and chill draught beer kegs in a commercial bar or cellar environment. It accommodates either two 50-litre kegs or up to eight 20-litre kegs, making it a practical solution where multiple beer lines are in service simultaneously. The unit uses R600a refrigerant, which carries a low global warming potential and is the standard choice for environmentally conscious operators.

In a working bar environment, consistent keg temperature is essential for product quality and line efficiency. The FK2-25 8R is built to maintain stable cooling across its full keg capacity during busy service periods, helping to ensure that beer reaches the tap at the correct temperature without fluctuation. Its double door configuration allows access to different keg positions without exposing the entire cabinet to warm ambient air — a practical advantage during high-turnover service.

From an operational standpoint, this unit offers a number of day-to-day benefits:

• Holds a meaningful mix of keg sizes to support varied draught beer ranges
• R600a refrigerant reduces environmental impact compared to older refrigerants
• Double door access supports efficient keg management and rotation
• Compact enough to fit within a standard back-of-bar or cellar layout
• Straightforward interior layout makes cleaning and maintenance manageable

The unit requires a standard electrical supply and adequate ventilation around the cabinet — clearance at the rear and sides should be factored into the installation plan. At 80kg, it will need two people to position safely. The footprint suits most bar cellar configurations, though the installation space should be measured carefully before ordering.

The FK2-25 8R is well suited to pub bars, hotel bars, and licensed venues running multiple draught lines where reliable keg conditioning is a daily requirement. Smaller single-door keg coolers are available for lower-volume operations, while busier multi-tap venues may benefit from a higher-capacity configuration.

If you're unsure whether this unit suits your draught setup or cellar layout, our team is happy to talk through the options with you.