Stick Blender Arms and Attachments

The Robot Coupe 27355 is a mixing tool attachment designed for use with the MP 350 Combi Ultra and MP 450 Combi Ultra stick blenders. Where a standard blending disc is built to cut and puree, this tool is designed to circulate and combine — making it the correct choice when the task is reconstituting dehydrated or dried products such as powdered soups, stocks, and sauces rather than blending whole ingredients.

In a working kitchen, using the wrong attachment for a given task creates inconsistent results and puts avoidable strain on the equipment. A blending head applied to dried powders can struggle to achieve an even mix; the mixing tool handles this cleanly and reliably, which matters when reconstituted products are prepared in volume during prep periods.

• Suited to reconstituting dehydrated soups, stocks, and sauces at volume
• Circulates and combines rather than cuts, for smooth, unblended results
• Robust metal gearing built for regular commercial use
• Protective rubber rim reduces the risk of marking or damaging pots and vessels
• Compatible with Robot Coupe MP 350 Combi Ultra and MP 450 Combi Ultra only

Compatibility is specific and worth confirming before ordering. This attachment fits only the MP 350 Combi Ultra and MP 450 Combi Ultra — it is not interchangeable with other Robot Coupe stick blender ranges. If you are unsure whether this attachment suits your current equipment, it is worth checking before purchase rather than after.

This is a practical addition for any operation already running one of the compatible Combi Ultra models where reconstituted products are a regular part of kitchen output — from smaller kitchens preparing daily soups through to larger production environments working at higher volumes. If you would like to talk through which Robot Coupe attachments are the right fit for your setup, our team is happy to help.

The Robot Coupe 27333 is a whisk attachment designed for use with the Mini MP 190 VV and Mini MP 240 VV variable-speed stick blenders. It replaces the standard blending shaft on the same handheld unit, extending what that piece of equipment can do without requiring a separate machine for lighter aeration work.

In practice, this kind of interchangeable tooling earns its place in kitchens where bench space and storage are tight. With the whisk fitted, the same handheld unit can handle emulsifying dressings, incorporating air into sauces, or whisking modest quantities of cream or egg white — tasks that arise regularly in prep but rarely at high volume. It is a practical way to broaden the utility of equipment already in the kitchen.

It is worth being clear about the scale of work this attachment is designed for. As part of a compact handheld range, it is suited to lighter, smaller-batch whisking rather than sustained high-volume aeration. Kitchens regularly processing large quantities would be better served by a planetary mixer. For occasional or moderate whisking tasks alongside standard blending work, however, this is a sensible, space-efficient option.

Fitting requires no tools and follows the same process as swapping the standard shaft — a quick changeover that works well in busy prep environments. Cleaning is straightforward and consistent with the rest of the Mini MP range.

If you are unsure whether this attachment is compatible with your current Robot Coupe equipment, or whether it is the right fit for the type of prep work your kitchen handles, the team is happy to talk it through before you order.

The Sammic MA-11 is a replacement mixer arm designed for use with Sammic's range of portable liquidisers, including the XM-12 model. It is the working end of the unit — the immersion shaft and blade assembly that makes direct contact with the food — and as such it is a wear item that will eventually require replacement in any busy kitchen environment.

In commercial use, mixer arms on portable blenders take considerable punishment. Repeated contact with hot liquids, acidic preparations, and abrasive ingredients all contribute to wear over time. Having a genuine replacement arm to hand avoids unnecessary downtime when a blade or shaft shows signs of deterioration, and ensures the blender continues to perform as intended rather than operating with a worn or damaged component.

Using a genuine Sammic part matters in a professional setting. Third-party alternatives may not match the tolerances of the motor housing correctly, which can affect blending efficiency and in some cases accelerate wear on the drive coupling. The MA-11 is the correct specified replacement for compatible models.

This arm is suited to operators already running a compatible Sammic portable liquidiser who need a direct replacement or wish to keep a spare in stock. If you are unsure whether the MA-11 is the correct arm for your specific model, or if you are looking at building out a broader set of accessories for your Sammic equipment, the team is happy to point you in the right direction before you order.

The Sammic MA-12 is a replacement mixer arm designed specifically for use with the Sammic XM-12 portable liquidiser. It is a genuine accessory part, intended to restore or maintain the full function of the XM-12 when the original arm becomes worn or damaged through regular service use.

In a busy kitchen environment, immersion blending tools take considerable punishment — repeated use across soups, sauces, and purées puts stress on the mixer arm over time. Having a compatible replacement to hand means downtime is kept to a minimum when a part needs changing, rather than waiting on a full unit repair or replacement.

This is a straightforward consumable accessory rather than a complex piece of equipment. Its practical value lies in keeping an existing Sammic XM-12 running reliably without interruption to service. It is worth confirming your specific XM-12 model variant before ordering, as Sammic produce several portable liquidiser configurations and compatibility should be verified.

If you are unsure whether this arm is the correct fit for your unit, or if you are looking at replacing the full liquidiser rather than just the arm, the team is happy to help you confirm the right part before you order.

The Sirman Vortex 385mm whisk is an accessory designed specifically for use with Sirman Vortex series bowl cutters. Where the standard blade assembly is built for chopping and blending, this attachment handles the aeration side of prep — whipping cream, beating egg whites, and incorporating air into light emulsified mixtures at volume. It is a straightforward way to extend what the machine can do without adding another piece of equipment to the bench.

In a working kitchen, using the wrong tool for a task tends to show in the result. A cutter blade will overwork delicate ingredients that need gentle aeration, producing inconsistent texture and wasted product. Swapping to the correct whisk attachment keeps preparation controlled and repeatable, which matters during pastry, dessert, or sauce prep where texture is critical to the finished dish.

• Allows whipping and aeration tasks on an existing Vortex bowl cutter
• Suited to cream, egg whites, and light emulsified mixtures
• Straightforward changeover between blade and whisk
• Keeps prep contained within a single machine platform
• Reduces the need for a separate piece of equipment on the bench

As with any machine accessory, it is worth confirming compatibility with your specific Vortex model before ordering. Sirman have produced several variants of the Vortex over the years, so if you have any uncertainty about your machine's model reference, it is sensible to check before purchasing.

This attachment is well suited to kitchens that already run a Sirman Vortex bowl cutter and want to broaden its use for pastry or dessert preparation. It is not a substitute for a planetary mixer where high-volume or extended whipping is the primary daily requirement — for those operations, a dedicated machine will serve better.

If you would like to confirm this attachment suits your machine before ordering, the team is happy to help.

Insufficient product information is available to write an accurate and helpful description for this accessory. Key details — including which Sammic stick blender models this clamp is compatible with, the bowl sizes it supports, and the materials or construction — have not been provided. Publishing without this information risks misleading customers or generating avoidable returns.

If you are considering this accessory for your kitchen, our team can confirm compatibility with your existing Sammic equipment and advise on the correct specification. It is worth getting in touch before ordering.

The Sammic MA-22 is a genuine replacement mixer arm designed for use with compatible Sammic portable immersion blenders. It forms the working end of the blender — the shaft and blade assembly that enters the pot or container — and is the component that bears the most wear during everyday use.

In a commercial kitchen, mixer arms take considerable punishment. Repeated immersion in hot stocks, soups, and acidic preparations, combined with the physical demands of high-volume blending, means this part will eventually need attention regardless of how well the motor unit is maintained. The wear is gradual, but the point at which a replacement is needed has a habit of arriving mid-service.

Keeping a compatible spare arm to hand is straightforward, sensible practice. When the need arises, the arm can be swapped quickly and service can continue — rather than waiting on a delivery while a perfectly functional motor unit sits unused on the shelf.

• Genuine Sammic part — correct fit and tolerances for compatible models
• Straightforward to swap without specialist tools or downtime
• Suitable for repeated use in high-frequency commercial blending
• Supports longer working life of the motor unit overall
• Low-cost safeguard against an avoidable interruption to service

Before ordering, it is worth confirming that the MA-22 is the correct arm for your specific Sammic blender model. Sammic produces several immersion blender variants across different power ranges, and mixer arms are not universally interchangeable between them. If there is any uncertainty about compatibility, or if you are building out a broader stock of spare parts, the team is happy to check before an order is placed.

The Sammic MA-21 is a genuine replacement mixer arm made specifically for the XM-21 portable liquidiser. It is a like-for-like component — not a universal fit — designed to bring the unit back to full working order when the original arm has worn or been damaged through regular use.

In a working kitchen, portable liquidiser arms take consistent punishment. Repeated contact with hot soups, thick purées, and fibrous ingredients, combined with daily cleaning cycles, causes gradual wear over time. Keeping a spare arm to hand means the XM-21 can be returned to service quickly, without waiting on parts or taking the unit out of rotation for longer than necessary.

Before ordering, confirm that your handset is the Sammic XM-21. The MA-21 arm is model-specific and will not fit other Sammic portable liquidiser variants. No tools are required for fitting — the arm attaches directly to the handset following the standard manufacturer procedure, making a changeover straightforward between or during service.

This is a practical stocking item for any kitchen running the XM-21 as part of its food preparation workflow — care catering, high-volume soup production, restaurant prep sections, and contract catering operations all commonly rely on this type of unit for daily blending tasks.

If you are not certain whether the MA-21 is the correct arm for your unit, or if you have questions about compatible accessories for your liquidiser setup, we are happy to help clarify before you order.