Blender Accessories

Insufficient product information is available to write an accurate and helpful description for this accessory. Key details — including which Sammic stick blender models this clamp is compatible with, the bowl sizes it supports, and the materials or construction — have not been provided. Publishing without this information risks misleading customers or generating avoidable returns.

If you are considering this accessory for your kitchen, our team can confirm compatibility with your existing Sammic equipment and advise on the correct specification. It is worth getting in touch before ordering.

This is the genuine spare stainless steel blending container for the Hamilton Beach HBB908R Series commercial bar blender. At 0.95 litres capacity, it is the standard working container for this blender range, designed to be kept as a backup or to rotate through during busy service periods without interrupting throughput at the bar.

In a commercial setting — whether that's a cocktail bar, café, juice bar, or hotel food and beverage operation — having a spare container on hand is a straightforward way to maintain pace during peak service. Rather than stopping to rinse and reset a single container between blends, operators can swap to a clean one immediately and keep the line moving.

• Stainless steel construction handles the demands of continuous commercial use
• Stainless steel blades and all-metal clutch for durability under regular heavy use
• Removable filler cap allows ingredients to be added mid-blend safely
• Lid is compatible with the 908 Lid-Open Sensor System, preventing operation without the lid correctly in place
• Fits all HBB908R Series blenders across both 120V and 230V models

It is worth confirming your specific HBB908R model variant before ordering, as Hamilton Beach produces several configurations within this series. This container is not cross-compatible with other Hamilton Beach blender ranges, so if you are unsure of your exact model, it is worth checking before purchasing.

If you would like to confirm compatibility with your existing blender or discuss how many spare containers make sense for your service volume, the team is happy to help.

The Hamilton Beach Commercial 6126-751R Air Whip Frothing Jar is a dedicated blending container designed to produce culinary foams, whipped cream, emulsified dressings and similar aerated preparations. It is compatible with Hamilton Beach Eclipse HBH750 and HBH755 series blenders and the Quantum HBH950 series, and is intended as a purpose-built accessory rather than a general-purpose blending jar.

The jar is built around a cone agitator specifically shaped to draw air into the blend and distribute it evenly throughout the mixture. In practice, this means operators can achieve consistent foam texture and stable emulsions without the inconsistency that comes from adapting a standard blending jar to these tasks. The removable filler cap allows ingredients to be introduced mid-cycle, which is useful when building emulsions that require oil or other liquids to be added gradually while the blade is running.

From an operational standpoint, the key practical advantages are:

• Cone agitator delivers reliable aeration for consistent foam and emulsion results
• Removable filler cap allows controlled ingredient addition during blending
• Polycarbonate construction is durable and easy to inspect for cleanliness
• Easy-read level indicator supports portion control and recipe consistency
• Fits directly onto compatible Hamilton Beach blender bases already in service

This jar is most relevant to operators already running compatible Hamilton Beach blenders who want to extend their menu capability into foams, mousses, or emulsified sauces without investing in separate equipment. It is a single-compatible accessory — confirm your blender model before ordering, as it will not fit other bases in the Hamilton Beach range.

If you are unsure whether this jar suits your current blender setup or the outputs you are trying to achieve, our team is happy to talk it through with you.

This is the spare 2-litre polycarbonate container for the Hamilton Beach HBH950 Series Quantum and HBH755 Series Eclipse commercial blenders. It is a direct replacement or additional vessel designed to allow operators to keep blending without pausing service to wash up between batches.

In busy bar and beverage environments, having a second container on hand is a straightforward operational decision. Rather than stopping to rinse and dry between orders, staff can rotate between containers during peak service and clean down at a more convenient point. The polycarbonate construction is durable enough for the demands of a commercial bar or juice counter, and the stainless steel blades are suited to working through ice as well as softer ingredients.

A few practical points worth noting:

• Compatible with HBH950 Series Quantum and HBH755 Series Eclipse blenders only — confirm your model before ordering
• Easy-read level markings support consistent portioning across drinks
• The Wave~Action system design helps ingredients circulate evenly, reducing the need to stop and scrape down
• Polycarbonate containers should be inspected regularly and replaced if cracked or crazed

This container is best suited to operators who already own a compatible Hamilton Beach blender and want to improve throughput during busy service or simply hold a spare against the risk of damage. If you are unsure whether this container fits your existing machine, or if you are considering the base unit alongside accessories, the team are happy to help clarify compatibility before you order.

The Hamilton Beach 6126-855-CE is a replacement 1.4-litre co-polyester container designed specifically for use with the HBH855 series commercial blenders. It is a direct spare part — not a universal accessory — and is intended to maintain the performance of an existing machine rather than upgrade it.

In a busy bar or café environment, having a spare container on hand makes a practical difference. When one container is in the wash or has taken damage during service, a ready replacement keeps the blender in use rather than taking it off the counter. The container is made from BPA-free co-polyester, which is robust enough for regular commercial use and resistant to the cloudiness and odour retention that can develop in cheaper materials over time.

• BPA-free co-polyester construction — durable and hygienic for daily commercial use
• Mess-free pouring spout to reduce spillage during busy service
• Ergonomic handle for confident, controlled handling
• Removable filler cap for adding ingredients mid-blend
• Laser-etched measurements that remain legible with repeated washing

The stainless steel blade assembly is included, and the container stacks neatly for storage when not in use — a practical consideration in tight back-bar spaces.

This container is compatible with the HBH855 series only. It will not fit other Hamilton Beach commercial blender models, so it is worth confirming your exact model number before ordering.

If you are running a high-volume operation and finding that one container is becoming a bottleneck, it may be worth discussing whether your current blender setup has the right capacity for your throughput — our team are happy to talk through the options.

This is the genuine spare polycarbonate blending container for the Hamilton Beach HBH750 Eclipse commercial blender. It is a direct replacement unit, designed to keep a second container on hand so that service can continue without pause while one container is being cleaned or has been taken out of use.

In a busy bar or smoothie operation, the ability to rotate between containers during a service period is a practical advantage. Rather than stopping to rinse and dry between orders, a spare container allows one to be in use while the other is being cleaned properly. The removable filler cap allows ingredients to be added during blending, which is useful when adjusting recipes mid-blend without interrupting the cycle. The container's easy-read level indicator helps staff work consistently and accurately, particularly during fast-paced service.

Key practical features of this container include:

• Removable filler cap for adding ingredients during blending
• Easy-read level indicator for consistent portioning
• Patented Wave~Action System that continually draws mixtures down into the blades
• Stainless steel blades suited to cutting through ice efficiently
• Polycarbonate construction designed to withstand the demands of commercial use

This container is specifically designed to fit the HBH750 Eclipse and is not interchangeable with other Hamilton Beach blender models. It is worth confirming your blender model before ordering to ensure compatibility.

It is best suited to operations running an HBH750 Eclipse where continuity of service matters — bars, juice bars, hotel beverage stations, and similar environments where a blender is in near-constant use. If your operation runs multiple blenders or higher blending volumes, it may be worth discussing your setup with us to ensure you have the right spares and accessories in place.

If you are unsure whether this container suits your current equipment or workflow, we are happy to help you check before you order.

This is the genuine replacement blending container for the Hamilton Beach HBB908 bar blender. Constructed in stainless steel and holding 0.95 litres, it is the same vessel supplied with the original machine and fits directly without any modification or adjustment.

In bar and beverage operations where orders come through in quick succession, having a spare container to hand is a straightforward way to maintain service pace. Rather than stopping to rinse between each blend, operators can rotate containers and handle cleaning at a quieter moment. Stainless steel holds up well under the demands of daily commercial use and is easy to sanitise in line with food hygiene requirements.

This container suits operators already running the HBB908 who want a backup for high-volume service periods, or who need a direct replacement following damage or wear. It is a machine-specific accessory, not a universal fit, so it is worth confirming your blender model before ordering.

If you are unsure whether this is the correct part for your machine, or you are putting together a blending station and want to check everything is compatible, the team is happy to talk it through.

The Robot Coupe 27333 is a whisk attachment designed for use with the Mini MP 190 VV and Mini MP 240 VV variable-speed stick blenders. It replaces the standard blending shaft on the same handheld unit, extending what that piece of equipment can do without requiring a separate machine for lighter aeration work.

In practice, this kind of interchangeable tooling earns its place in kitchens where bench space and storage are tight. With the whisk fitted, the same handheld unit can handle emulsifying dressings, incorporating air into sauces, or whisking modest quantities of cream or egg white — tasks that arise regularly in prep but rarely at high volume. It is a practical way to broaden the utility of equipment already in the kitchen.

It is worth being clear about the scale of work this attachment is designed for. As part of a compact handheld range, it is suited to lighter, smaller-batch whisking rather than sustained high-volume aeration. Kitchens regularly processing large quantities would be better served by a planetary mixer. For occasional or moderate whisking tasks alongside standard blending work, however, this is a sensible, space-efficient option.

Fitting requires no tools and follows the same process as swapping the standard shaft — a quick changeover that works well in busy prep environments. Cleaning is straightforward and consistent with the rest of the Mini MP range.

If you are unsure whether this attachment is compatible with your current Robot Coupe equipment, or whether it is the right fit for the type of prep work your kitchen handles, the team is happy to talk it through before you order.

The Sammic MA-12 is a replacement mixer arm designed specifically for use with the Sammic XM-12 portable liquidiser. It is a genuine accessory part, intended to restore or maintain the full function of the XM-12 when the original arm becomes worn or damaged through regular service use.

In a busy kitchen environment, immersion blending tools take considerable punishment — repeated use across soups, sauces, and purées puts stress on the mixer arm over time. Having a compatible replacement to hand means downtime is kept to a minimum when a part needs changing, rather than waiting on a full unit repair or replacement.

This is a straightforward consumable accessory rather than a complex piece of equipment. Its practical value lies in keeping an existing Sammic XM-12 running reliably without interruption to service. It is worth confirming your specific XM-12 model variant before ordering, as Sammic produce several portable liquidiser configurations and compatibility should be verified.

If you are unsure whether this arm is the correct fit for your unit, or if you are looking at replacing the full liquidiser rather than just the arm, the team is happy to help you confirm the right part before you order.

The Sammic MA-21 is a genuine replacement mixer arm made specifically for the XM-21 portable liquidiser. It is a like-for-like component — not a universal fit — designed to bring the unit back to full working order when the original arm has worn or been damaged through regular use.

In a working kitchen, portable liquidiser arms take consistent punishment. Repeated contact with hot soups, thick purées, and fibrous ingredients, combined with daily cleaning cycles, causes gradual wear over time. Keeping a spare arm to hand means the XM-21 can be returned to service quickly, without waiting on parts or taking the unit out of rotation for longer than necessary.

Before ordering, confirm that your handset is the Sammic XM-21. The MA-21 arm is model-specific and will not fit other Sammic portable liquidiser variants. No tools are required for fitting — the arm attaches directly to the handset following the standard manufacturer procedure, making a changeover straightforward between or during service.

This is a practical stocking item for any kitchen running the XM-21 as part of its food preparation workflow — care catering, high-volume soup production, restaurant prep sections, and contract catering operations all commonly rely on this type of unit for daily blending tasks.

If you are not certain whether the MA-21 is the correct arm for your unit, or if you have questions about compatible accessories for your liquidiser setup, we are happy to help clarify before you order.

This is the genuine spare 1.4L co-polyester container for Hamilton Beach HBH455, HBB255 and HBF510 series commercial blenders. It is designed as a direct replacement or additional container for operations where having a second vessel in rotation reduces downtime during service.

In a busy bar or juice counter, being able to rinse and swap containers rather than pause service to clean a single vessel mid-rush is a practical advantage. The container is built to the same specification as the original, so performance and fit are consistent with the motor base.

• BPA-free co-polyester construction throughout
• Triple-seal lid helps contain splatter during heavy blending cycles
• Removable filler cap allows ingredients to be added while blending
• Stainless steel blade assembly rated for commercial use
• Lid-open sensor prevents operation with lid removed when paired with a compatible 230V base

The ergonomic handle and all-metal clutch connection are consistent with the original container, so staff familiar with the machine will find no difference in handling. The co-polyester material is durable and resistant to the thermal and mechanical stresses of continuous blending, though like all polycarbonate-alternative vessels it benefits from correct cleaning procedures to maintain clarity and hygiene standards over time.

This container is suited to any site already running a compatible Hamilton Beach blender that wants a backup vessel or needs to replace a damaged original. If you are unsure whether this container is the right fit for your specific blender model or workflow, the team is happy to confirm compatibility before you order.

The Robot Coupe 27355 is a mixing tool attachment designed for use with the MP 350 Combi Ultra and MP 450 Combi Ultra stick blenders. Where a standard blending disc is built to cut and puree, this tool is designed to circulate and combine — making it the correct choice when the task is reconstituting dehydrated or dried products such as powdered soups, stocks, and sauces rather than blending whole ingredients.

In a working kitchen, using the wrong attachment for a given task creates inconsistent results and puts avoidable strain on the equipment. A blending head applied to dried powders can struggle to achieve an even mix; the mixing tool handles this cleanly and reliably, which matters when reconstituted products are prepared in volume during prep periods.

• Suited to reconstituting dehydrated soups, stocks, and sauces at volume
• Circulates and combines rather than cuts, for smooth, unblended results
• Robust metal gearing built for regular commercial use
• Protective rubber rim reduces the risk of marking or damaging pots and vessels
• Compatible with Robot Coupe MP 350 Combi Ultra and MP 450 Combi Ultra only

Compatibility is specific and worth confirming before ordering. This attachment fits only the MP 350 Combi Ultra and MP 450 Combi Ultra — it is not interchangeable with other Robot Coupe stick blender ranges. If you are unsure whether this attachment suits your current equipment, it is worth checking before purchase rather than after.

This is a practical addition for any operation already running one of the compatible Combi Ultra models where reconstituted products are a regular part of kitchen output — from smaller kitchens preparing daily soups through to larger production environments working at higher volumes. If you would like to talk through which Robot Coupe attachments are the right fit for your setup, our team is happy to help.

The Sammic MA-22 is a genuine replacement mixer arm designed for use with compatible Sammic portable immersion blenders. It forms the working end of the blender — the shaft and blade assembly that enters the pot or container — and is the component that bears the most wear during everyday use.

In a commercial kitchen, mixer arms take considerable punishment. Repeated immersion in hot stocks, soups, and acidic preparations, combined with the physical demands of high-volume blending, means this part will eventually need attention regardless of how well the motor unit is maintained. The wear is gradual, but the point at which a replacement is needed has a habit of arriving mid-service.

Keeping a compatible spare arm to hand is straightforward, sensible practice. When the need arises, the arm can be swapped quickly and service can continue — rather than waiting on a delivery while a perfectly functional motor unit sits unused on the shelf.

• Genuine Sammic part — correct fit and tolerances for compatible models
• Straightforward to swap without specialist tools or downtime
• Suitable for repeated use in high-frequency commercial blending
• Supports longer working life of the motor unit overall
• Low-cost safeguard against an avoidable interruption to service

Before ordering, it is worth confirming that the MA-22 is the correct arm for your specific Sammic blender model. Sammic produces several immersion blender variants across different power ranges, and mixer arms are not universally interchangeable between them. If there is any uncertainty about compatibility, or if you are building out a broader stock of spare parts, the team is happy to check before an order is placed.

The Hamilton Beach 6126-400 is a replacement 1.8-litre stainless steel blending container designed to fit the HBF400 and HBF500 series commercial bar blenders. It is sold as a spare unit, giving operators a second container ready to go rather than waiting for one vessel to be washed mid-service.

In a busy bar or drinks operation, having a spare container on hand is a straightforward operational decision. When throughput is high — smoothie bars, juice counters, hotel breakfast service — swapping containers rather than pausing to clean and dry a single vessel keeps the line moving. The container and blade assembly are designed to keep ingredients circulating consistently through the cutting zone, which helps produce a well-blended, evenly emulsified result batch after batch.

A few practical points worth noting:

• Stainless steel construction handles repeated commercial washing reliably
• Removable dosing cup allows ingredients to be added during blending
• Comfortable grip handle supports confident handling when full
• Compatible with both HBF400 and HBF500 series base units
• Designed to align with the blade and coupling of the original unit

This container is sized for single-serve and small-batch work rather than high-volume continuous blending. Operations running a high frequency of large blends back to back may find the capacity limiting and should consider whether a larger-format container or a second complete blender unit would better serve their volume.

If you are unsure whether this container is the right match for your existing blender or whether a different setup would suit your service better, we are happy to talk it through.

The Sammic MA-11 is a replacement mixer arm designed for use with Sammic's range of portable liquidisers, including the XM-12 model. It is the working end of the unit — the immersion shaft and blade assembly that makes direct contact with the food — and as such it is a wear item that will eventually require replacement in any busy kitchen environment.

In commercial use, mixer arms on portable blenders take considerable punishment. Repeated contact with hot liquids, acidic preparations, and abrasive ingredients all contribute to wear over time. Having a genuine replacement arm to hand avoids unnecessary downtime when a blade or shaft shows signs of deterioration, and ensures the blender continues to perform as intended rather than operating with a worn or damaged component.

Using a genuine Sammic part matters in a professional setting. Third-party alternatives may not match the tolerances of the motor housing correctly, which can affect blending efficiency and in some cases accelerate wear on the drive coupling. The MA-11 is the correct specified replacement for compatible models.

This arm is suited to operators already running a compatible Sammic portable liquidiser who need a direct replacement or wish to keep a spare in stock. If you are unsure whether the MA-11 is the correct arm for your specific model, or if you are looking at building out a broader set of accessories for your Sammic equipment, the team is happy to point you in the right direction before you order.

This is the genuine spare stainless steel blending container designed specifically for the Hamilton Beach HBF600S commercial bar blender. It is a direct replacement or backup unit — nothing more, nothing less — intended to keep the blender operational when the primary container is out of service or awaiting a wash cycle.

In bar and kitchen environments where blending runs continuously through a shift, having a second container to hand is a straightforward operational measure. One container can be rinsed and set aside while the other is already back in use, removing the pause that would otherwise break service pace. A stainless steel construction also holds up more consistently in commercial conditions than polycarbonate alternatives, resisting staining and odour absorption over time.

• Maintains blending throughput during busy service by rotating between containers
• Stainless steel resists staining and odour from repeated use with strongly flavoured ingredients
• Reduces risk of a single damaged container taking the blender off the pass entirely
• Genuine Hamilton Beach part — confirmed fit for the HBF600S model
• Straightforward to clean and swap between service rounds

It is worth confirming your exact blender model before ordering. Hamilton Beach containers are not universally interchangeable across their full range, and fitting an incompatible container is a common ordering mistake. If you have any doubt about compatibility, the team is happy to check before you order.

This is the spare 1.25-litre polycarbonate container designed specifically for the Hamilton Beach HBB908R series commercial blenders. It is a direct replacement or additional container for operators who need to keep service moving without waiting for a single container to be washed between batches.

In a busy bar or beverage operation, having a second container to hand makes a practical difference during peak periods. Rather than halting service to rinse and dry the container between orders, staff can swap immediately and clean between rushes. The polycarbonate construction holds up well in a commercial environment, resisting the knocks and temperature variations typical of a working bar or café station. The stainless steel blades are designed to handle ice efficiently, which is where most blender containers are put under the most stress in day-to-day use.

Key practical points worth noting:

• Fits all HBB908R series blenders, both 120V and 230V models
• Comfortable handle supports controlled pouring during service
• Polycarbonate body is lighter than glass and handles daily use reliably
• Stainless steel blades cope well with ice-heavy blending tasks

This container is suited to bars, cafés, juice bars, and any operation running an HBB908R blender where continuity of service matters. It is a single-container accessory — operators running high-volume continuous blending through an entire service shift may want to consider whether multiple spares make sense for their setup.

If you are unsure whether this container is compatible with your specific blender model or want to discuss how to kit out a blending station properly, the team is happy to help.

The Sirman Vortex 385mm whisk is an accessory designed specifically for use with Sirman Vortex series bowl cutters. Where the standard blade assembly is built for chopping and blending, this attachment handles the aeration side of prep — whipping cream, beating egg whites, and incorporating air into light emulsified mixtures at volume. It is a straightforward way to extend what the machine can do without adding another piece of equipment to the bench.

In a working kitchen, using the wrong tool for a task tends to show in the result. A cutter blade will overwork delicate ingredients that need gentle aeration, producing inconsistent texture and wasted product. Swapping to the correct whisk attachment keeps preparation controlled and repeatable, which matters during pastry, dessert, or sauce prep where texture is critical to the finished dish.

• Allows whipping and aeration tasks on an existing Vortex bowl cutter
• Suited to cream, egg whites, and light emulsified mixtures
• Straightforward changeover between blade and whisk
• Keeps prep contained within a single machine platform
• Reduces the need for a separate piece of equipment on the bench

As with any machine accessory, it is worth confirming compatibility with your specific Vortex model before ordering. Sirman have produced several variants of the Vortex over the years, so if you have any uncertainty about your machine's model reference, it is sensible to check before purchasing.

This attachment is well suited to kitchens that already run a Sirman Vortex bowl cutter and want to broaden its use for pastry or dessert preparation. It is not a substitute for a planetary mixer where high-volume or extended whipping is the primary daily requirement — for those operations, a dedicated machine will serve better.

If you would like to confirm this attachment suits your machine before ordering, the team is happy to help.

This is the genuine spare 4-litre polycarbonate container designed specifically for the Hamilton Beach HBF1100S commercial bar blender. It is a straightforward accessory, but a practical one — having a spare container to hand means staff can swap and continue blending without waiting for a container to be washed, dried, and returned to service between rounds.

Polycarbonate is the standard material for commercial bar containers because it handles the repeated impacts of a busy service far better than glass, and its lighter weight is a real advantage when containers are being picked up and put down constantly throughout a shift. It is worth being aware that polycarbonate does cloud and mark with extended heavy use — this is normal wear rather than a product fault, and periodic replacement is routine practice in high-volume bar environments.

From an operational standpoint, keeping a spare container per machine makes particular sense if your HBF1100S units are running continuously during service — cocktail bars, smoothie stations, and busy kitchen passes are the typical environments where the swap-and-rinse workflow earns its keep.

This container is compatible with the HBF1100S base unit only and is not a universal fit across the wider Hamilton Beach commercial range. Confirming your blender model before ordering is important. If you are unsure about compatibility or want to discuss spares and accessories for your current setup, the team is happy to help before you commit to an order.

The Sammic clamp sliding frame is a mounting accessory designed to work alongside a bowl clamp, allowing a stick blender to be moved smoothly across the diameter of a large mixing bowl. Rather than manually repositioning the blender by hand, the sliding frame provides a guided track that keeps the tool moving in a controlled, consistent path across the bowl surface.

In a busy kitchen environment, this kind of accessory matters more than it might first appear. When blending large batches of soup, sauce, or purée in a wide bowl, fatigue and inconsistency become real practical problems. The sliding frame reduces the physical effort involved and helps operators achieve a more even blend across the full volume of the container, which is particularly useful during extended prep sessions or when working with viscous products.

• Enables controlled lateral movement of the stick blender across the bowl
• Reduces operator fatigue during large-batch blending tasks
• Suitable for use with wide commercial mixing bowls
• Works in conjunction with the Sammic bowl clamp accessory
• Keeps the blender stable and positioned correctly throughout the blend

It is worth confirming compatibility with your existing Sammic stick blender model and bowl clamp before ordering, as this accessory is designed to integrate with specific Sammic equipment rather than as a universal fitting. If you are working with unusually large or non-standard bowl sizes, it is worth checking the maximum bowl diameter against your own equipment.

This accessory is best suited to kitchens already using Sammic stick blenders for high-volume batch work — catering operations, central production kitchens, or anywhere that large-bowl blending is a regular part of the workflow.

If you are unsure whether this fits your current setup, our team are happy to talk it through.

Insufficient product data available to generate a reliable description. Please review compatibility details, included disc count, applicable Sammic models, and intended preparation applications before publishing.

This wall-mounted display stand is designed specifically for Sammic XM and XMT series immersion blenders and whisks. It provides a dedicated hanging point to store the blender body and any attached or spare tools, keeping them off the worktop and within easy reach during service.

In a busy kitchen, having blending equipment scattered across prep surfaces or stored unsafely in drawers is a practical hazard. A fixed wall bracket keeps tools organised, visible, and accessible without taking up valuable counter space — a small detail that makes a meaningful difference in high-throughput preparation areas.

• Keeps XM and XMT blenders and whisks stored safely off the worktop
• Ensures tools are immediately to hand during prep and service
• Helps maintain a tidy, organised workspace around blending stations
• Reduces risk of damage from unsecured storage
• Compatible with the Sammic XM and XMT immersion blender range

Installation is straightforward — the stand mounts to a wall or suitable vertical surface near the prep area. As with any wall-fixed fitting, the surface material and fixings should be appropriate for a commercial kitchen environment, particularly where walls may be tiled or subject to moisture.

This stand is best suited to kitchens already running Sammic XM or XMT immersion blenders that want to formalise storage and keep the prep area organised. It is an accessory purchase and requires the relevant Sammic blender to be of practical use.

If you are unsure whether this stand is compatible with your existing Sammic equipment, or if you are specifying a new blending setup, our team is happy to help you confirm the right combination before you order.

The Sammic Emulsionizer PRO 1.0 is a specialist accessory designed for use with the Sammic XM-12 immersion blender. It consists of a stainless steel filter body fitted with interchangeable perforated bases, each selected according to the texture or consistency required. The blender operates inside the filter chamber, where ingredients are loaded, and the combination of blade speed and filtered containment produces controlled emulsions that would be difficult to achieve reliably with a standard stick blender alone.

In a working kitchen, the Emulsionizer PRO 1.0 earns its place through consistency and versatility. Chefs use it for tasks that demand precise emulsification — vinaigrettes, sauces, and flavoured oils — as well as for extracting essences from herbs, roots, and grains where a clean, filtered result matters. It also handles plant-based milk preparation and smooth purées for dietary or healthcare menus where texture compliance is important. The interchangeable base system means one tool can shift between these different applications without requiring separate equipment.

Practical benefits for kitchen teams include:

• Consistent emulsion results that reduce reliance on technique alone
• Interchangeable bases allow the same unit to cover multiple preparation tasks
• Stainless steel construction supports regular cleaning and daily service use
• Compact format that stores and handles easily in a busy prep environment
• Reduces waste by allowing off-cuts and trimmings to be transformed into usable preparations

The Emulsionizer PRO 1.0 is designed specifically to pair with the Sammic XM-12 blender and requires an immersion blender with a blade guard diameter of no more than 65 mm. It will not be compatible with all stick blenders, so it is worth confirming your existing equipment before ordering. If you do not currently hold the XM-12, the two are typically purchased together.

This accessory is well suited to restaurant kitchens, development chef environments, healthcare catering operations requiring texture-modified diets, and any site where emulsification and infusion tasks form a regular part of the prep schedule. It is a focused, single-purpose tool rather than a high-volume production item, and is best placed in kitchens where output quality and consistency matter more than batch size.

If you are unsure whether this accessory is compatible with your current blender setup, or would like to understand the full range of Sammic preparation tools, the team is happy to talk it through with you.

The Sammic MM-50V is the motor unit for Sammic's commercial stick blender system. It does not come supplied with a mixer arm — those are selected and purchased separately, giving operators the flexibility to configure the tool for the specific task and vessel size in use. The motor block itself is built around variable speed control, allowing the operator to adjust blending intensity through a smooth, responsive speed curve rather than switching between fixed settings.

In a busy kitchen environment, the practical value of the MM-50V lies in its ability to handle prolonged, uninterrupted use without the motor housing overheating — a common failure point on lighter-duty units pressed into commercial service. The SmoothControl system helps here by managing acceleration more precisely: it improves start-up behaviour under load and limits sudden over-acceleration when the blender is lifted clear of the product, which reduces mess and operator fatigue during back-to-back service.

The TiltStop safety system is worth noting for kitchens where multiple staff use the same equipment. The motor will not start unless it is held in the correct operating position, and it will cut out if the unit tilts or is dropped during use. For a tool that typically operates over deep pots and hot liquids, this is a sensible design decision rather than a feature to be glossed over.

• Variable speed control for precise blending across different applications
• Designed for continuous operation without overheating
• TiltStop safety system prevents accidental start-up and cuts out on excessive tilt
• Two-material anti-slip grip reduces operator fatigue during extended use
• Compatible with separately available mixer arms and whisk attachments

The MM-50V is well suited to operations that blend regularly at volume — soups, sauces, purées — and need a reliable motor unit they can pair with the appropriate arm length for their pots and containers. It is less likely to be the right choice for very occasional use, where a simpler fixed-speed unit may represent better value. For sites processing extremely large batch volumes, it is worth discussing whether a higher-capacity option within the range would be more appropriate.

If you are unsure which arm configuration or capacity suits your kitchen's workflow, our team is happy to talk through the options before you commit to a purchase.

The Sammic MM-30 is a fixed-speed motor unit designed to form the core of a commercial immersion blender setup. It is sold as the motor block alone, with mixer arms purchased separately in the length most suitable for the vessel and task in hand. Three arm lengths are available, allowing operators to match the unit to containers up to 60 litres — covering everything from small sauce pans through to large stock pots and bain marie inserts.

In a busy kitchen environment, reliability under sustained use matters considerably more than peak performance figures. The MM-30 is built for continuous operation without the motor casing overheating, which is a practical concern with immersion blending tasks that run for extended periods during prep. The casing geometry is also shaped to resist rolling if set down on a worktop — a small detail that reduces the risk of the unit falling and causing damage or injury.

Sammic's TiltStop system provides an additional layer of operational safety: the unit will not start unless it is held in the correct upright position, and it cuts out automatically if tilted excessively or dropped during use. This is particularly relevant in high-tempo kitchens where staff are working quickly and equipment handling is not always methodical. The two-material grip and handle angle are designed to reduce hand fatigue during longer blending sessions, which is worth considering for kitchens with high prep volumes.

• Fixed-speed operation suited to consistent blending tasks throughout service prep
• Compatible with multiple arm lengths for different vessel sizes
• TiltStop safety cut-out reduces risk of accidents during busy service
• Ergonomic grip and handle angle reduce fatigue during extended use
• NSF approved, supporting hygiene compliance in professional kitchens

The MM-30 is well suited to small to medium-sized operations — cafés, pub kitchens, hotel prep areas, and contract catering environments where immersion blending is a regular but not industrial-scale task. For higher-volume production sites processing very large batches continuously, a heavier-duty variable-speed model may be worth considering. It is worth confirming arm compatibility before ordering, as arms are a separate purchase and not all arm lengths suit all tasks.

If you are unsure which arm length is right for your vessels or whether the MM-30 is appropriately specified for your prep volumes, we are happy to talk it through.

The Sammic MM-10V is a variable-speed motor unit for commercial immersion blending. It is sold as the motor unit alone — the mixer arm is purchased separately — and is designed to work comfortably with containers up to 10 litres in capacity. The adjustable speed control allows operators to match blending speed to the task, whether that is blending hot soups during service or processing sauces and purées during mise-en-place preparation.

The MM-10V incorporates Sammic's SmoothControl system, which manages speed response and stability during operation. In practical terms this means the unit starts smoothly under load, avoids sudden over-acceleration when lifted from the container, and maintains consistent performance throughout extended use. For kitchens running continuous prep, this kind of controlled behaviour reduces splashing and helps maintain a clean workstation.

From an operational standpoint, the unit is built around user comfort during longer preparation sessions:

• Variable speed dial gives precise control from gentle blending to full power
• Two-material anti-slip grip and angled handle reduce hand fatigue during extended use
• Click-on arm attachment system allows quick, secure fitting and removal between tasks
• Compact, balanced casing is shaped to prevent rolling on work surfaces
• NSF approval confirms the unit meets recognised commercial hygiene standards

As a motor unit, the MM-10V is appropriate for smaller to mid-range batch work. It is well suited to kitchens where immersion blending is a regular part of daily prep rather than a primary high-volume production task. For operations processing very large batch volumes continuously, a higher-output motor unit from the Sammic range may be worth considering.

If you are unsure which mixer arm configuration or capacity level suits your kitchen's output requirements, the team is happy to help you work through the options before you order.

The Sammic MM-20V is the motor unit for Sammic's range of professional immersion blenders. Sold as the drive head only, it accepts separately purchased stick arms and is intended for operators who are building out or replacing components within an existing Sammic immersion blender setup. It is a variable speed unit, giving operators control over blending intensity depending on the task and the consistency required.

In a busy kitchen environment, the ability to blend continuously without the motor block overheating is a practical necessity rather than a selling point. The MM-20V is built around this requirement, with a motor that has been tested to withstand prolonged, repeated use — relevant for kitchens producing large volumes of soups, sauces, or puréed dishes throughout service. The SmoothControl system manages speed response and stability during use, including at start-up under load and when lifting the blender clear of the container, which helps reduce the kind of splatter and uncontrolled acceleration that can be a nuisance during fast-paced service.

From an operational standpoint, the key practical advantages are:

• Variable speed control for precise blending across different preparations
• Stable motor response under load, reducing user fatigue and mess
• Quick-release arm connection for fast changeover and cleaning
• Ergonomic two-material grip with anti-slip surface for extended handling comfort
• NSF-approved design, meeting recognised hygiene and safety standards

The unit is designed to work in containers of up to 12 litres, which suits most standard stockpots and gastronorm containers used in commercial production. Two arm lengths are available separately, allowing the motor unit to be matched to the depth of container typically used in your kitchen. If your operation regularly works with larger batch volumes, it is worth considering whether a higher-powered unit would be more appropriate.

As this is a motor unit only, arms must be sourced separately — confirm compatibility with the arm lengths available before ordering. If you are unsure which arm or configuration suits your workflow, our team are happy to talk it through with you.