Cambro

The Cambro Cam GoBox is a polypropylene insulated food carrier designed for transporting full-size gastronorm pans in commercial catering operations. This top-loading model is 4 inches deep, accommodating a 100mm pan, and is finished in black. It is widely used in event catering, contract catering, hospital and care facility food distribution, and anywhere that food needs to travel a distance between kitchen and service point while maintaining safe holding temperatures.

In practice, the Cam GoBox earns its place through straightforward reliability. The polypropylene shell is robust enough to handle the knocks of regular transportation and daily loading cycles without degrading, and the top-loading design makes it practical to stack and carry. It is the kind of carrier that tends to stay in service for years when looked after correctly — a meaningful consideration for operations that are moving food continuously across a shift.

From an operational standpoint, the key advantages are:

• Insulated construction helps maintain food temperatures during transit and short-term holding
• Top-loading design suits efficient loading and unloading at the point of service
• Polypropylene construction is food-safe, cleanable, and resistant to everyday impact
• Lightweight at under 900g, reducing fatigue when carrying over distance
• Black finish suits front-of-house or buffet environments where appearance matters

There are no water or electrical connections required, and no installation considerations in the traditional sense. It is worth confirming pan depth compatibility before ordering — this model suits 100mm deep full-size gastronorm pans specifically, and Cambro offer a range of depths to match different pan configurations. If you are carrying shallower pans or require a larger volume per unit, a different depth or configuration within the GoBox range may be more appropriate.

This carrier is well suited to event caterers, mobile operations, schools and care homes, and any kitchen supplying a satellite service point. It is less suited to situations where extended hot-holding is required over several hours, where a more heavily insulated or heated unit would be a better fit.

If you are putting together a fleet of carriers for a specific operation, or are unsure which configuration matches your pan setup, feel free to get in touch with the team — it is a straightforward conversation that can save a return.

Cambro's Colorware tumblers are a long-established choice in commercial foodservice. The clear version is a straightforward styrene-acrylic tumbler built for repeated daily use — offering a clean, neutral presentation that suits a range of service styles without committing to a colour scheme.

In operational terms, these tumblers are made to cope with the handling demands of busy cafeteria and casual dining environments. The textured exterior reduces slip during service and handling, while the smooth interior supports fast, thorough cleaning — whether by hand or through a commercial glasswasher. The Sani-Rim lip design keeps the drinking edge away from surfaces that are regularly handled, and stacking lugs allow the tumblers to nest securely, making restacking and storage more manageable during a busy service.

Key practical advantages for operators include:

• Scratch-resistant exterior texturing helps maintain appearance over time
• Smooth interior supports efficient cleaning in high-volume washup
• Sani-Rim lip keeps the drinking surface sanitary in daily service
• Stacking lugs allow stable, space-efficient storage
• Pack of 72 provides practical cover without over-ordering

There are no installation requirements — these are ready to use straight from the pack. A pack of 72 suits many operations well, though sites with longer service windows, higher table turnover, or extended washup cycles may want to hold additional stock to maintain sufficient covers throughout the day.

These tumblers are well suited to cafeterias, staff restaurants, healthcare dining, and casual dining operations where durability and hygiene take priority over glassware presentation. They are not intended for fine dining environments where glass would typically be expected.

If you are working out how many covers this pack will support across your service periods, or whether a different size or pack format would be a better fit, we are happy to talk it through with you.

Cambro's 10" clear polycarbonate plate covers are a practical smallware for any food service operation that needs to protect plated meals during transport or holding. The 10" diameter suits a standard commercial dinner plate, and covers are supplied in boxes of 12, making them a straightforward stocking item for sites with regular service runs.

Polycarbonate is a well-established material in professional catering. It handles the stacking and knocks of a working kitchen without chipping or cracking, and it is considerably quieter in use than stainless steel equivalents — a genuine consideration in dining rooms, care home settings, and hospital wards where ambient noise matters. The clear construction allows serving staff to check plated food visually without lifting the cover, which helps preserve both temperature and presentation during trolley runs or longer service distances.

From a practical standpoint, these covers offer a few straightforward operational advantages:

• Protects plated meals from contamination and temperature loss during transport
• Clear material allows visual checks without disturbing the cover
• Lighter than metal covers, reducing fatigue during busy service
• Quieter in use — well suited to care, ward, and fine dining environments
• Dishwasher-safe for fast turnaround between sittings

There are no installation requirements. The main practical consideration is quantity. A box of 12 suits a modest operation or works as a top-up, but higher-volume sites running multiple sittings will likely need additional stock to avoid covers being held in the wash cycle during service. It is worth working out your cover count and typical turnaround time before ordering.

These covers are commonly used in care homes, hotel room service, education catering, and any setting where plated meals travel a meaningful distance before reaching the guest. If you are unsure how many to carry relative to your service pattern, the team are happy to help you work it out.

Dimensions: 100(H) x 500(W) x 500(D)mm The rack is made from highly durable polypropylene which makes it highly resistant to high temperatures up to 93 degrees Celsius and cleaning chemicals. These racks are also available in 9 other colours which means they are ideal for setting up a colour-coded cleaning system, helping you to quickly identify glassware types whilst in storage. With closed sides, the racks also keep your pots, pans and bowls sanitary once cleaned, so they will remain fresh until next use to save extra time and effort on cleaning.

The Cambro Camdolly is a wheeled transport dolly built to pair with Cambro Camracks — the dish and glass racks widely used in commercial warewashing operations. Its job is a simple one: it allows kitchen staff to roll loaded racks between collection points, the wash area, and storage rather than carrying them by hand.

In practice, that distinction matters more than it might appear. A fully loaded dish rack is heavy, awkward to carry safely, and slow to move through a busy service corridor. Rolling it takes a fraction of the effort and time, which keeps the warewashing cycle moving without putting unnecessary physical strain on staff. The Camdolly's castors are suited to the kinds of floor surfaces found in working kitchens — quarry tile, vinyl, threshold strips, and slightly sloped drainage floors — and handle them without the catching or jamming that lighter domestic-grade castors tend to produce under load.

• Polypropylene construction resists rust, corrosion, and cracking under normal kitchen conditions
• Sized to suit full-size Cambro Camracks for consistent pairing across an operation
• Lightweight build makes it easy to reposition or store when not in use
• Smooth manoeuvrability helps reduce corridor congestion during peak service
• Reduces manual handling risk for staff moving heavy loaded racks repeatedly

It is worth confirming that your existing Camracks are full-size before ordering, as the dolly is designed around that format. Sites running high rack volumes continuously may find that having more than one dolly keeps throughput moving more smoothly than relying on a single unit.

The Camdolly suits any operation using Cambro Camracks — from hotel banqueting and contract catering facilities to pub kitchens and school canteens. If you are setting up a warewashing area and want to make sure the rack and dolly combination works for your layout and service pattern, our team is glad to help you think it through.

Cover for dishracks Use this Cambro DRC2020180 Camrack full rack cover to cover and protect full size Camrack dishracks filled with clean dishware. It eliminates the use of messy, time-consuming plastic wrap or vinyl covers while serving as a vital component to your Camrack storage system. When combined with the Cambro Camdolly (CT307) it creates a portable sanitary storage system which protects your clean dishware and glassware between uses.

This Cambro front-loading insulated food carrier is a passive, non-powered unit designed to transport and hold gastronorm pans at food-safe temperatures away from the kitchen. Built from polyethylene with polyurethane insulation and a sealed door gasket, it is intended for operations where food is prepared centrally and then moved to a remote service point — without access to power or heat-holding equipment at the destination.

In practice, this type of carrier is widely used in contract catering, school meals services, care home operations, and event and banqueting catering. The front-loading configuration allows gastronorm pans to be loaded and retrieved quickly, which is important when service windows are short and access needs to be efficient. The carrier accommodates full 1/1 GN pans across two levels, giving operators the flexibility to carry multiple dishes or courses in a single unit.

Key operational advantages include:

• Front-loading door with nylon latches for secure closure and fast access during service
• Airtight gasket maintains temperature throughout the hold period without any power connection
• Compatible with the Cambro Camdolly for safe movement between preparation and service areas
• Polyethylene shell is robust, lightweight relative to capacity, and straightforward to wipe down after use

It is worth noting that this is a passive carrier — it retains the temperature of food loaded into it rather than generating heat. Pre-conditioning the unit by placing a hot pan or warm water inside before loading will noticeably improve temperature hold performance, particularly in colder environments or for longer transport runs. At just under 90 litres, this unit is well matched to small-to-medium service volumes; operations running higher quantities or extended multi-course services may find a larger-capacity model in the same range more appropriate.

This carrier suits caterers, care homes, schools, and contract catering operations that regularly move batch-cooked or plated food to off-kitchen service points. If you are weighing up whether the capacity or configuration fits your service pattern, the team is glad to help you think it through before you commit.

The Cambro S Series Ultra Insulated Carrier is a top-loading polypropylene food transport box designed to hold a single full 1/1 GN tray. Its purpose is straightforward: maintaining safe food temperatures during transit and holding periods, whether that means moving hot food from a production kitchen to a servery or keeping prepared dishes at temperature ahead of service.

The thick foam insulation core is what makes this carrier useful in real operational settings. For buffet services, event catering, or off-site delivery, the ability to hold food at a safe serving temperature over a meaningful period reduces dependence on reheating at the point of service and helps keep the flow of service consistent. The polypropylene shell is robust enough to handle the knocks, drops, and stacking that come with regular use across busy kitchens and transport environments.

A few design details are worth noting from an operational standpoint:

• Four nylon latches seal firmly to retain temperature and prevent accidental opening in transit
• Moulded-in handles on all four sides allow comfortable carrying in any orientation
• Interlocking corners enable stable stacking during storage or vehicle transport
• Polypropylene body wipes down easily and resists staining from food contact
• Rated to handle contents up to 120°C, covering the full range of hot holding requirements

It is worth being clear about what this carrier is and is not. It is a passive insulation product — it retains temperature rather than generating heat, so pre-loading food at the correct serving temperature is essential. It is also sized for a single full GN tray, so operations handling larger volumes at once will either need multiple units or should consider a higher-capacity multi-tray carrier from the broader range.

This carrier is well suited to event caterers, schools, hospitals, care homes, and contract catering operations that need a reliable, lightweight solution for transporting or holding hot food in GN format. If you are unsure whether this model suits your service volumes or workflow, we are happy to talk it through.

The Cambro CD400401 Camdolly is a purpose-built transport dolly designed specifically to work with Cambro insulated food boxes. Its function is straightforward: it keeps a loaded insulated carrier mobile across flat surfaces without requiring it to be lifted between moves. Constructed from polyethylene, it is a practical ancillary item that addresses a genuine operational issue — insulated food boxes become considerably heavier when loaded, and repeated lifting during a busy service creates physical strain and an increased risk of spillage or dropped carriers.

In catering environments such as banqueting, hotel food service, and event operations, food often needs to move between preparation areas, holding positions, and service points multiple times during a shift. A dolly removes the need to lift the carrier for each of those moves, which is particularly relevant when transporting hot or chilled food that needs to arrive intact and at the right temperature. The polyethylene build is durable enough for regular daily use and straightforward to wipe clean.

• Reduces manual handling load when moving filled insulated carriers
• Keeps carriers mobile across kitchen and service floor surfaces
• Robust polyethylene construction withstands regular commercial use
• Contributes to safer working practices during busy service periods
• Purpose-matched to the Cambro insulated food box range

It is worth confirming that your floor surfaces are suitable before relying on dolly transport. This type of dolly performs best on smooth, level floors — uneven surfaces, ramps, or door thresholds can make movement less practical and may need separate consideration.

This dolly is well suited to any operation already using Cambro insulated food boxes that wants to reduce the physical demands of moving loaded carriers during service. If you are working across multiple box sizes or want to confirm compatibility with your current setup, we are happy to help you work that out before you order.

For use with all Cambro GN and 60x40cm EPP Front and Top Loaders For use with any of the top of front loading Cambro Cam Go Boxes, this set of coloured menu labels allows for easy identification of contents and routing. The labels are simple to fit, using the built-in labelling area on the boxes. The set includes, red, green, yellow, white and blue identification labels to ensure your food delivery and transport network is well organised.

Insert for chiller plate (DB152) This Camchiller insert fits all CamGo boxes except for the large handled box. The camchiller is designed to give your Cambro Cam Go Boxes an additional cold boost for longer cooling times, making it the ideal accessory for your food transport box. Built-in cut-outs support also cold transfer while protecting food from condensation. They easily adapt to all Cam GoBox GN1/1 except for the large handle box and are incredible simple to use. The chiller plate can be frozen overnight and slides easily onto the top rails of your insulated food box, extending cold holding times well beyond the four hours.

Dimensions: 76(H) x 660(W) x 460(D) mm This 460mm deep pizza dough proofing box from Cambro is ideal for storing, transporting, proofing, and cooling dough. A critical component in any pizzeria, bakery, sub shop, or deli, this box gives your fresh dough the perfect place to cool, rest, and rise for the best taste. The spacious box gives your dough plenty of room to breathe, develop texture and can be conveniently stacked with others of a similar size when paired with compatible lid (CW801) which is sold separately. Thanks to reinforced sides the box is highly durable, while the edges are smooth and rounded for safety.

Lid for CW800 The Cambro white pizza dough proofing box cover is designed to fit the Cambro pizza dough proofing box (CW800). With a highly durable polypropylene construction, the lid is both long lasting and easy to clean. This lid is perfect for bakeries, pizza shops, diners, and other foodservice facilities that make and bake pizza in house. When paired with its compatible proofing box, this lid aids in preventing crusting, which helps to increase the storage life of your dough.

This kit from Cambro consists of four stainless steel rails and two frames, designed to work within Cambro's front loading food carrier system. Rather than fixing the carrier to a single internal layout, the components allow operators to adjust rail spacing to suit the containers being transported on a given run.

In practice, this makes a real difference for operations running banqueting, off-site delivery, or multi-outlet service. Carriers can be reconfigured between runs to accommodate different container heights — reducing the temptation to send out partially loaded units and helping operators make better use of available transport capacity during busy periods.

The stainless steel construction handles the everyday demands of food transport environments well. It cleans down quickly, resists the knocks of regular loading and unloading, and holds up reliably in kitchens where carriers are used daily.

• Adjustable rail spacing suits containers of varying heights
• Modular format allows layout changes between service runs
• Stainless steel construction withstands heavy daily use
• Compatible with Cambro front loading food carrier systems
• Lightweight addition that keeps overall carrier weight manageable

This kit is intended for operations already running Cambro front loading carriers who want to extend the flexibility of their existing units. It is worth confirming compatibility with your specific carrier model before ordering, as Cambro produces several configurations within this range.

If you are building a food transport setup from scratch or are unsure how many kits would suit your typical service volumes, the team is happy to work through the options with you.

2 stainless steel rails This kit contains stainless steel frames and two sets of rails designed for use with the Cambro Cambox front loader carrier, providing more flexibility to adjust and create custom space between the rails. Building your own configuration allows you to transport items of different sizes, and help maximise your food transport storage space.

The Cambro EPP Tablotherm is an insulated single-serve meal delivery tray designed for operations where plated food needs to travel from a central production kitchen to the point of service. Each unit comes supplied with a 21cm plate, two 14cm bowls, and reusable covers, making it a complete, self-contained system rather than a collection of parts to source separately.

In real-world use, the Tablotherm is a practical choice in NHS and private healthcare catering, care home environments, and school meal services — settings where maintaining safe food temperatures during trolley rounds is a compliance requirement. The expanded polypropylene construction keeps the unit notably light for its durability, which makes a meaningful difference when catering staff are handling trays repeatedly across a full service period. The material is rated across a wide temperature range, accommodating both hot and chilled components within the same tray without compromising either.

From an operational standpoint, the key practical advantages are:

• Hot and cold compartments kept separate within a single tray, maintaining temperature integrity throughout a round
• Stackable design that loads efficiently onto standard catering trolleys and stores compactly between services
• Compatible with commercial dishwashers, supporting turnaround without hand-washing
• Reusable covers included, reducing ongoing consumable costs
• Lightweight polypropylene construction that remains durable under repeated daily use

No fixed infrastructure is required — the trays work alongside existing trolley and dishwasher equipment in most setups. The practical planning consideration is volume. Operations covering large ward circuits or high pupil numbers should calculate the total units needed to complete a full round and allow for dishwasher cycle time before the next service. Getting that number right at the outset avoids gaps in cover mid-service.

The Tablotherm system is well suited to healthcare, education, and social care catering where portion-controlled, temperature-safe delivery is a routine daily requirement. For operations with higher volumes or more complex delivery configurations, it is worth considering whether a larger fleet of units or a different system architecture would be a better fit.

If you would like to talk through quantities, trolley compatibility, or how the system would work within your specific service pattern, the team is glad to help you work it out before you order.

The Cambro Camrack is a polypropylene glass rack designed around a practical 4-in-1 principle: glassware is washed, stored, identified by colour, and transported in the same unit. The 20-compartment configuration accommodates glasses up to 279mm in height, making it suitable for a wide range of stemware, tumblers, and tall glasses commonly used in bar and restaurant service.

In busy operations, the real value of a system like this becomes clear quickly. Rather than decanting glassware between a wash rack, a storage shelf, and a service area, the Camrack moves through the whole cycle without the glass ever needing to be handled unnecessarily. That reduces breakages, saves handling time during and after service, and keeps glassware cleaner by limiting exposure between the glasswasher and the bar or table.

Key practical advantages include:

• Colour-coded beige identification helps separate glass types across a busy bar or multi-outlet site
• Polypropylene construction is lightweight, robust, and resistant to the repeated thermal cycling of a commercial glasswasher
• Compatible with Camdolly transport dollies and Camrack covers for full system use
• Stackable design supports efficient storage without dedicated shelving for each rack
• Smooth interior surfaces make the rack straightforward to keep clean

The rack is designed to fit standard 500mm-footprint glasswasher baskets and undercounter glasswasher chambers, though it is worth confirming compatibility with your existing equipment before ordering. At 5.53kg the rack itself is manageable when empty, but a fully loaded 20-compartment rack will require two-handed handling.

This rack is well suited to bars, hotels, event catering operations, and restaurants with moderate to high glass throughput where a consistent wash-to-service workflow is important. For very high-volume sites running multiple glass types simultaneously, a broader range of colour-coded racks used as a complete system will give the most benefit.

If you are unsure which compartment size or colour configuration best fits your glassware and workflow, the team is happy to talk it through with you.