Cambro

The Cambro Camrack is a polypropylene compartment rack designed to carry glassware through the full cycle of a busy bar or catering operation — from collection after service, through the glasswasher, and on to storage or redistribution — without transferring glasses between containers at any stage. The blue 36-compartment version accommodates glasses up to 298mm in height, making it compatible with a wide range of tumblers and stemware commonly used in licensed venues and contract catering environments.

In high-turnover operations, glassware breakage most often occurs during handling between containers. The Camrack reduces that risk by keeping glasses in the same unit from the point they are cleared from the table to the point they are returned to service. The polypropylene construction tolerates repeated high-temperature glasswasher cycles without warping or degrading, which matters on sites where racks are going through the machine multiple times per shift.

From an operational standpoint, the system offers some practical advantages worth noting:

• Reduces glass handling at every stage of the service cycle, lowering breakage risk
• Blue colour coding supports easy identification and rack rotation across a multi-colour system
• Compatible with the Camdolly for mobile transport between floors or service areas
• Accepts a Camrack cover for hygienic storage or transport between services
• Polypropylene construction holds up well under repeated commercial glasswasher use

Before ordering, it is worth confirming that your glasswasher chamber and storage shelving will accommodate the 500mm square footprint. Sites running unusually tall branded glassware should also verify the 298mm maximum compartment height against their actual glass stock before committing to this configuration.

The 36-compartment Camrack is well suited to licensed bars, hotel banqueting departments, and contract catering operations handling significant daily glass volumes. Smaller venues with lower throughput may find a reduced-compartment configuration a more practical fit, while larger operations running multiple racks simultaneously would benefit from considering the full Camdolly and cover system alongside.

If you are weighing up which Camrack configuration makes most sense across your operation, we are glad to help you work through it.

The Cambro Camrack is a polypropylene compartment rack designed to carry glassware safely through the full cycle of service — from collection and washing through to storage and redistribution. This blue variant holds 30 glasses in individual compartments and is sized for glasses up to 92mm tall, making it well suited to standard wine glasses, shot glasses, tumblers, and similar stemware commonly used in licensed premises and hospitality operations.

The rack system is built around the principle of keeping glassware in a single unit from dirty collection through to clean storage, which reduces handling, lowers breakage risk, and keeps service areas more organised during busy periods. The polypropylene construction is robust enough for repeated pass-throughs in commercial glasswashers and holds its shape over extended use without warping or distorting compartment spacing.

Practical advantages for busy bar and kitchen operations include:

• Reduces glass handling between collection, washing, and restocking
• Colour-coded blue finish supports simple rack identification systems
• 30-compartment layout maximises load density without compromising wash coverage
• Compatible with the Cambro Camdolly and Camrack cover for a complete transport and storage system
• Polypropylene construction resists warping through repeated glasswasher cycles

These racks are designed to sit directly into compatible glasswashers, so it is worth confirming that your existing machine accepts 500mm racks before ordering. The rack weighs 5.28kg empty, so factor in the loaded weight when assessing trolley requirements for your team. Cambro's Camdolly is the intended transport base for multi-rack movement, though the racks can be stacked and stored independently.

This rack is well suited to bars, hotel operations, event catering, and any site turning over significant glassware volume where reducing breakage and improving throughput between washes matters. For operations running a wider range of glass sizes or needing deeper compartments, alternative Camrack configurations are available within the range.

If you are unsure which compartment size or colour coding suits your current setup, the team is happy to talk through your requirements before you order.

The Cambro Camrack is a polypropylene compartmentalised glass rack designed to carry glassware through the full cycle of a busy service operation — from the glasswasher through storage and out to the bar or service point. This blue 30-compartment version accommodates glasses up to 133mm tall, making it well suited to standard tumblers, shot glasses, and many stemless wine glasses commonly used in pub and bar environments.

Where Camracks earn their place in commercial operations is in the continuity they provide. Rather than decanting glassware between containers at each stage, the rack moves with the glasses throughout: loaded dirty, run through the glasswasher, stored on a Camdolly, covered to keep contents clean, and transported directly to the service area. This reduces handling, which in turn reduces breakage — a meaningful saving in high-volume sites where glass attrition is a real cost.

Practical advantages in day-to-day use include:

• Colour-coded blue shell for immediate identification by glass type or zone
• Compartment design prevents contact between glasses during washing and transport
• Polypropylene construction resists warping and withstands repeated glasswasher cycles
• Compatible with Camdolly trolley system for safe, stable movement across a site
• Cover option keeps stored glassware hygienically protected between services

Camracks are sized to fit standard undercounter and pass-through glasswashers, but it is worth confirming compatibility with your specific machine before committing to a quantity. The 500mm square footprint also determines how many racks will fit comfortably on your Camdolly and in your storage area, so it is worth mapping that out if you are building out a full system.

This rack is well suited to bars, hotels, function venues, and any site handling significant glassware volumes. For operations with a wider mix of glass sizes or taller stemware, other compartment configurations and height options are available within the Camrack range.

If you are putting together a full Camrack system or are unsure which compartment size works best for your glassware profile, we are happy to talk it through with you.

The Cambro Camrack is a polypropylene glass rack designed to carry glassware through the complete service cycle — from the glasswasher through to storage and back to the bar or service station. The blue 30-compartment version accepts glasses up to 174mm in height, making it well suited to standard tumbler and stemless glassware commonly found in pubs, restaurants, and hotel bars.

Where this system earns its place in busy operations is in the consolidation of handling stages. Glasses load into the rack once, go through the wash cycle in the rack, come out clean, and can be stored and transported in the same unit — reducing the number of times staff handle individual glasses during a service period. That reduction in handling directly lowers the risk of breakages and speeds up the turnaround between wash and deployment.

Practical benefits for front- and back-of-house teams include:

• Single-rack system covers washing, storage, identification by colour, and transport
• Blue colour coding helps staff quickly identify glass type or rack designation
• Polypropylene construction withstands repeated commercial glasswasher cycles
• Compartment design keeps glasses separated and reduces contact damage
• Compatible with Cambro Camdolly and Camrack cover for full system use

The rack is designed to work within the broader Cambro system, which includes a Camdolly for floor-level transport and a cover for storage hygiene. Operators running high glass volumes should consider whether the 30-compartment configuration provides sufficient throughput per cycle for their peak service periods, or whether multiple racks are needed to maintain flow.

This rack suits bars, restaurants, hotel food and beverage operations, and event catering where glassware handling efficiency and breakage reduction are priorities. For operations with very different glass heights or significantly higher throughput demands, alternative compartment configurations are available within the Camrack range.

If you'd like to discuss how the Camrack system fits into your existing glasswasher setup or storage workflow, the team is happy to help you work through the practicalities before you order.

The Cambro Camrack is a polypropylene glass rack designed to handle glassware through multiple stages of bar and kitchen operation without needing to transfer glasses between different containers. The blue 30-compartment configuration holds glasses up to 215mm in height and is sized to fit standard commercial glasswashers, making it a practical choice for operations that want to reduce handling time and breakage risk.

The core value of the Camrack system is that glassware moves through the entire service cycle — from dirty collection through the glasswasher, into storage, and back out to service — without being unpacked. In a busy bar or function operation, this matters. Less handling means fewer breakages, faster turnaround between washes, and a more organised back-of-house workflow. The blue colouring also helps operators identify rack contents quickly, which is useful where multiple rack sizes or glass types are in use.

Practical operational benefits include:

• Glasses wash, store and travel in the same rack — no decanting between stages
• Blue colour-coding supports clear stock identification in busy service areas
• Polypropylene construction is durable and resistant to warping under repeated wash cycles
• Compatible with Camdolly transport dollies and Camrack covers for a complete system
• 30 compartments give a good balance between rack capacity and manageable weight when full

These racks are well suited to hotels, bars, event catering operations and restaurants with a high glass turnover. For operations running very large glass volumes across multiple service points, higher-compartment or larger-format rack configurations may be worth considering. Equally, smaller operations with limited glasswasher capacity may find a lower-compartment rack easier to manage through service.

If you are building out a full Camrack system with dollies and covers, or are unsure which compartment size best suits your glassware profile, our team is happy to talk it through with you before you order.

The Cambro Camrack is a polypropylene glass rack designed to carry glassware through the full working cycle of a commercial bar or food service operation — from the glasswasher through to storage, transport, and the service point. This blue 30-compartment version accommodates glasses up to 258mm in height, covering most tumbler and standard wine glass profiles used in licensed premises, restaurants, and contract catering environments.

The practical value of a Camrack lies in reducing how often glassware changes hands. A loaded rack goes straight from the glasswasher onto the shelf or bar top without staff needing to restack individual glasses at each stage. That unbroken handling chain cuts breakage risk, limits cross-contamination, and saves meaningful time during a busy service period when staff have little margin to spare.

The blue colour coding earns its place in multi-outlet or high-volume sites where racks serve distinct areas or glass types. A consistent colour system reduces the chance of racks drifting between sections or being loaded with the wrong glassware, which matters when a venue is running at pace.

• Moves glassware from washer to service point without rehandling individual glasses
• Blue colour coding supports clear rack management across multiple service areas
• Polypropylene construction handles repeated commercial glasswasher cycles reliably
• Compatible with Camrack transport dollies and covers for a complete integrated system
• Consistent compartment sizing supports orderly storage and faster restocking

This rack suits bars, hotels, restaurants, and contract catering operations running a consistent glassware range within the supported height. Sites with very tall stemware or unusually wide bowl profiles should check glass dimensions before ordering. For high-volume operations, pairing the rack with a Camdolly and cover makes the system significantly more efficient.

If you would like to talk through whether this compartment size and colour suits your glass range and service setup, the team is glad to help.

The Cambro Camrack is a polypropylene glass rack designed to carry glassware through washing, drying, storage and transport without the need to transfer glasses between separate containers at each stage. This blue 30-compartment version accommodates glasses up to 298mm in height and fits the standard 500mm square footprint common to most commercial glasswashers. It forms part of Cambro's broader Camrack system, which includes compatible Camdolly transport dollies and rack covers.

In high-volume bar and catering environments, the key practical value is in reducing handling. Glasses load into the rack once, go through the glasswasher, move directly to the bar or storage area, and return the same way. Every unnecessary transfer is a point where breakage can occur and where staff time is lost. At 30 compartments, a single rack can move a meaningful quantity of glassware in one journey, which adds up across a busy service.

Operational advantages for bar and kitchen teams include:

• Single-rack system eliminates glass transfers between wash, store and transport stages
• Colour-coded blue format aids rack sorting and identification across multi-rack sites
• Polypropylene construction withstands repeated commercial glasswasher cycles reliably
• Compatible with Camdolly dollies for moving loaded racks safely without lifting
• Rack covers keep washed glasses dust-free in storage without additional packaging

Before ordering, it is worth confirming your glasswasher's internal basket clearance. Most commercial machines accept the standard 500mm footprint, but some compact undercounter models have tighter tolerances. The polypropylene build keeps weight manageable, though a fully loaded 30-compartment rack will be substantial to carry by hand — a Camdolly is a practical addition for any site moving multiple racks regularly.

This rack suits pubs, bars, hotels and event caterers washing significant glassware volumes daily. Smaller operations with modest throughput may find a lower-compartment configuration more practical, while very high-volume sites running continuous glass rotation could benefit from building out a larger rack set with additional dollies.

If you're working out how many racks you need or want to check compatibility with your existing glasswasher or storage arrangement, the team is glad to talk it through with you.

The Cambro Camrack is a purpose-built glass rack designed around a 4-in-1 system: glassware is washed, stored, identified by colour, and transported all within the same unit. The blue 25-compartment configuration accepts glasses up to 92mm in height, making it well suited to tumbler and small stemware use in busy bar and hospitality environments.

In practice, the Camrack system reduces the repeated handling that causes breakages. Rather than transferring glasses between a wash basket, a storage shelf, and a service tray, the rack moves with the glassware through the entire cycle. In high-turnover operations — bars, banqueting kitchens, hotel food and beverage service — this kind of workflow simplification has a measurable effect on both breakage rates and staff time.

Key practical advantages include:

• Colour-coded in blue for quick visual identification across a multi-rack system
• Polypropylene construction resists warping and withstands repeated dishwasher cycles
• Compatible with Cambro's Camdolly for floor-level transport without lifting
• Compatible with Cambro Camrack covers for hygienic storage between service periods
• 25 individual compartments keep glasses separated and protected during washing

At 500mm square, the rack is sized to fit standard undercounter and pass-through glasswashers, though it is worth confirming compatibility with your existing machine before ordering. The 92mm maximum glass height is a firm constraint — taller glasses will need a different compartment configuration from the Camrack range.

This rack is a practical choice for bars, restaurants, hotels, and contract catering operations running a volume of glassware through service. Smaller operations with limited glass throughput may find a lower-compartment count sufficient, while very high-volume sites may benefit from running multiple racks within a coordinated Camrack system.

If you are building out a full Camrack system or are unsure which compartment size suits your glassware, the team is happy to help you work through the options.

The Cambro Camrack is a polypropylene compartment rack designed to carry glassware through the full cycle of a commercial bar or kitchen operation — from the glasswasher through to storage and back out to service. Each rack holds 25 glasses in individual compartments, with a maximum accepted glass height of 279mm, and the blue colourway is part of Cambro's colour-coding system, which helps busy teams identify rack types at a glance when multiple configurations are in use.

In practice, the Camrack earns its place in high-turnover operations because it removes the need to handle glassware at multiple points. Glasses go into the rack dirty, are washed in situ, stored in the same rack, and transported to service without being touched unnecessarily. This reduces breakage, speeds up turnaround during peak periods, and keeps staff handling time to a minimum when the bar is under pressure.

Practical advantages for day-to-day operation include:

• Colour-coded blue finish supports rack identification across multi-rack systems
• Individual compartments protect glassware during washing and transit
• Compatible with Camdolly transport dollies and Camrack covers for a complete handling system
• Polypropylene construction withstands repeated commercial glasswasher cycles
• Stackable design supports compact storage between service periods

Before ordering, confirm that the rack dimensions — 500mm square footprint — are compatible with your glasswasher basket aperture. Not all glasswashers accept a 500mm rack, so it is worth checking your machine's internal dimensions first. The 279mm maximum glass height also needs to match your tallest glassware; if you run taller stemware, a different compartment configuration may be more appropriate.

This rack is well suited to pubs, hotel bars, event venues, and restaurants with a structured glassware programme. Operations running a mixed rack system alongside covers and dollies will get the most from this format. For higher-volume sites managing a larger glassware inventory, alternative rack configurations with greater compartment counts or taller clearances may be worth considering.

If you are unsure whether this rack size and compartment layout matches your glassware and washing setup, we are happy to talk it through before you commit.

The Cambro Camrack is a polypropylene compartment rack designed to hold glassware securely through the wash cycle and then serve as the storage and transport unit for those same glasses — removing the need to handle glassware repeatedly between washing, drying, and service. This blue 25-compartment version accommodates glasses up to 133mm in height, making it well suited to standard tumbler and wine glass profiles commonly used across bars, restaurants, and event catering operations.

In practice, the Camrack system reduces breakage and handling time by keeping glasses in the same rack from dishwasher through to the bar or service station. Staff load once and the rack does the rest — through the machine, onto the shelf, and back into service. In high-volume environments where glassware turnover is constant, this kind of system discipline makes a measurable difference to both glass loss and labour time.

Practical advantages of this rack include:

• Colour-coded in blue to support simple glass segregation by type or location
• Polypropylene construction handles repeated commercial wash cycles reliably
• Designed to work within the broader Cambro Camrack system, including compatible dollies and covers
• Reduces the risk of chipping and breakage compared to loose glass handling
• Stackable design supports efficient storage when not in active rotation

It is worth confirming compatibility with your existing dishwasher rack dimensions and any Camdolly or cover units you intend to use alongside this rack. The 25-compartment layout suits medium glass volumes; for operations running higher throughput or larger glass formats, alternative compartment counts and height capacities are available within the Camrack range.

If you are unsure which Camrack specification best fits your glassware profile or service volume, we are happy to help you work that out before you order.

The Cambro Camrack is a polypropylene compartment rack designed to hold glassware securely through the full cycle of warewashing, storage, and transport. This blue 25-compartment version accepts glasses up to 156mm in height, making it suitable for a wide range of tumbler and stemware profiles commonly found in bars, hotels, and restaurant beverage operations.

The Camrack system is built around a straightforward principle: glassware goes into the rack, goes through the glasswasher, comes out clean, and stays in the same rack until it reaches the bar or service point. This reduces the amount of handling between washing and service, which in practice means fewer breakages and a faster turnaround during busy periods. The polypropylene construction is durable under the repeated thermal cycles of commercial warewashing and resists the warping and cracking that affects lower-quality alternatives over time.

From an operational standpoint, the main advantages are:

• Glassware is washed and transported in the same unit, reducing handling stages
• Colour coding in blue supports rack identification and stock rotation systems
• 25 compartments per rack allows efficient batching through the glasswasher
• Polypropylene construction withstands repeated commercial warewashing cycles
• Compatible with the wider Camrack system including Camdolly and covers

The rack is designed to fit standard commercial glasswashers, but it is worth confirming compatibility with your existing machine before ordering, particularly if you run an older or non-standard cabinet. The 500mm square footprint is a common glasswasher format, though checking your chamber dimensions is sensible practice. Weight when loaded with glassware should also be considered if staff are required to lift and carry racks frequently — a Camdolly is worth factoring in for higher-volume sites.

This rack is well suited to bars, hotel banqueting operations, and restaurant beverage sections with moderate to high glass throughput. Sites running very high volumes across multiple service points may benefit from having a greater number of racks in rotation to maintain continuous flow. For operations handling taller glassware such as certain wine glasses or highballs, it is worth checking glass height against the 156mm maximum before committing.

If you are unsure whether this rack is the right fit for your glasswasher or service volume, our team is happy to help you work through the requirements.

The Cambro Camrack is a polypropylene glass rack designed to carry glassware through the full cycle of a commercial operation — from dishwasher to storage to service point — without the glasses ever needing to be decanted. The blue 25-compartment version accommodates glasses up to 174mm in height, making it well suited to standard tumbler and stemless wine glass sizes commonly used across pub, bar, and restaurant environments.

The principle behind the Camrack system is straightforward: the rack goes into the dishwasher, comes out clean, and can move directly to a shelf or bar station without the glasses being handled in between. This significantly reduces the risk of breakages, cross-contamination during handling, and the labour time associated with manually polishing or relocating glassware after washing. In busy service periods, where bar staff are managing speed and hygiene simultaneously, this kind of streamlined workflow has a real practical impact.

• Washes, stores, and transports glassware in a single unit without decanting
• Colour-coded in blue for easy identification across multi-rack systems
• Compatible with Camdolly transport dollies and Camrack covers
• Polypropylene construction resists warping and holds up to repeated machine washing
• 25 individual compartments reduce contact between glasses during transport

The rack is part of Cambro's wider Camrack system, which includes compatible Camdolly transport dollies and rack covers. If you are managing a large glass stock across multiple service areas, the system is designed to stack and move as a unit, which reduces handling time and the risk of breakages during transit. The colour coding is useful in multi-rack environments where separating glass types or service areas by colour aids stock management.

This size is appropriate for smaller to mid-volume bar and restaurant operations. For venues with a very high glass turnover or a requirement for taller stemware, it is worth considering whether a different compartment count or height specification would serve the operation better.

If you are fitting out a full bar system or are unsure which combination of rack sizes and accessories will work for your glass range, the team are happy to talk it through before you order.

The Cambro Camrack is a polypropylene compartment rack designed to carry glassware through the full cycle of a commercial operation — from the glasswasher through to storage and back to the bar or service point. This blue 25-compartment version accommodates glasses up to 197mm in height, making it suitable for a wide range of tumbler, wine, and stemware formats commonly found in licensed venues, hotels, and restaurant operations.

Where Camracks earn their place in busy operations is in the consistency they bring to glass handling. Rather than transferring glassware between a wash crate, a storage shelf, and a service tray, the rack does all three jobs. This reduces handling time, lowers the risk of breakage, and keeps glassware organised during high-volume service periods. The polypropylene construction holds up well in the repeated heat and moisture cycles of a commercial glasswasher without warping or degrading.

Practical advantages for day-to-day operation include:

• Eliminates the need to restack or transfer glasses between wash and storage
• Colour-coded blue format supports glass type identification across a multi-rack system
• Compatible with the Camdolly transport system for moving racks safely between areas
• Stable compartment design reduces glass-to-glass contact and breakage risk
• Straightforward to clean and inspect between service periods

The Camrack system works best when the rack dimensions are matched to your glasswasher's internal basket size before purchase. The 500mm footprint fits most standard commercial glasswashers, but it is worth confirming compatibility with your existing equipment, particularly if you are running a smaller undercounter machine. The colour-coding system only delivers its full benefit when adopted consistently across a rack fleet — a mixed approach tends to cause more confusion than it resolves.

This rack is well suited to bars, hotels, event catering operations, and any venue that turns over significant glass volume during service. For operations running a large number of glass types simultaneously, building a complete colour-coded Camrack fleet is worth considering. Sites with very high throughput may also benefit from looking at higher-compartment or larger-format options within the range.

If you are unsure which compartment size or colour coding suits your glass inventory and wash cycle, we are happy to talk it through before you order.

The Cambro Camrack is a compartment glass rack designed to handle glassware at every stage of its journey through a commercial operation — from the glasswasher, through storage, and back to service. This blue 25-compartment version accommodates glasses up to 215mm in height, making it suitable for a broad range of standard bar glassware including tumblers, hi-balls, and stemless wine glasses.

In a busy bar or catering environment, the Camrack system earns its keep through consistency. Glasses go into the rack dirty, go through the washer in the rack, come out clean, and are stored or transported in the same rack — eliminating the handling steps where breakages and contamination are most likely to occur. The polypropylene construction is robust enough for the repetitive handling that comes with high-volume service, and the blue colour coding helps operators maintain a clear system when multiple rack sizes or types are in use.

Practical advantages for kitchen and bar teams include:

• Wash-to-store-to-service workflow reduces glass handling and breakage risk
• Colour coding supports rack organisation across multi-rack operations
• Polypropylene construction resists the heat and chemicals of commercial glasswashers
• Compatible with Cambro Camdolly transport systems for safe movement between areas
• Stackable design supports efficient back-of-house storage

Before ordering, it is worth confirming that the rack footprint is compatible with your glasswasher's interior dimensions. The 500mm square base is a common fit for undercounter glasswashers, but not universal — particularly in older or compact machines. The 25-compartment configuration suits standard-sized bar and restaurant glassware; operations running taller or wider specialist glasses should check the 215mm height limit carefully before committing.

This rack is well suited to pub bars, hotel beverage operations, event catering, and any site washing and storing a regular volume of glassware. For operations running a wider variety of glass sizes, Cambro's Camrack range includes alternative compartment configurations and height clearances that may be a better match.

If you are building out a full Camrack system or are unsure which configuration suits your glassware range, our team is happy to help you work through the options.

The Cambro Camrack is a polypropylene compartment rack designed to carry glassware through the full service cycle — from washing through to storage and transport — without the glasses ever needing to be moved to a separate container. The blue 25-compartment version accommodates glasses up to 238mm in height, making it suitable for a broad range of standard bar and restaurant glassware.

In busy bar and hospitality environments, the real value of a system like this is the reduction in glass handling. Glasses load into the rack, go through the glasswasher in the rack, and come out ready to store or take straight to the bar. That cycle reduces breakages, speeds up post-service restocking, and keeps glassware organised during high-volume service periods when staff are under pressure.

Practical day-to-day advantages include:

• Colour-coded in blue for straightforward identification and stock separation
• Polypropylene construction is robust, lightweight and easy to clean
• Compatible with the Camrack Camdolly and cover for a complete wash-store-transport system
• 25-compartment layout suits standard wine, water and highball glasses
• Stackable design helps with storage when racks are not in use

The rack is designed to fit standard commercial glasswashers, but it is worth confirming compatibility with your existing machine before ordering — glasswasher basket dimensions vary between manufacturers. The 500mm footprint is a common format, but always check your machine's internal chamber size. The rack itself weighs just under 10kg when empty, which is manageable for most bar staff but worth bearing in mind if racks will be moved fully loaded.

This rack is well suited to bars, hotels, event caterers and restaurant operations running a steady volume of glassware through a commercial glasswasher. For operations with a wider range of glass sizes or heavier throughput, Cambro offers alternative compartment configurations and sizes within the Camrack range that may be a better fit.

If you are building out a full Camrack system or are unsure which compartment size suits your glassware profile, we are happy to talk it through.

The Cambro Camrack is a polypropylene glass rack designed to carry glassware through the full service cycle — from glasswasher to storage to the pass — without any need to transfer glasses between containers at any stage. This blue 25-compartment version accommodates glasses up to 258mm in height, making it suitable for a broad range of tumblers, stemware, and cocktail glasses typical of bar and hospitality operations.

The rack is built around the principle of minimising glass handling. After service, glasses load straight into the rack, go through the glasswasher, and can be stored or transported in the same unit without being touched again until they reach the bar. In high-volume operations, that reduction in handling translates directly into lower breakage rates and a faster post-service turnaround. The polypropylene construction holds up well under repeated dishwasher cycles, resisting both heat and chemical exposure without degrading.

In practical terms, operators benefit from:

• A single rack that manages washing, storage, transport, and glass identification
• Reduced glass handling and breakage risk throughout service
• Colour-coded blue specification to support organised rack sorting across multiple glass types
• Compatibility with the Camdolly transport system for safe movement between areas
• Consistent glass orientation during washing for reliable, repeatable hygiene results

Before ordering, it is worth confirming that your glasswasher chamber height and internal basket dimensions will accept this rack with glasses loaded. The 500mm square footprint is standard across the Camrack range, which makes mixed-rack storage straightforward where you are running more than one compartment size.

This rack is well suited to high-volume bars, hotel banqueting operations, and restaurant front-of-house teams managing a consistent glass profile. Sites with a wider variety of glass heights may find it useful to hold more than one compartment size across the range to cover their full glassware inventory.

If you are specifying racks across a full bar or banqueting setup, or want to confirm compatibility with your existing glasswasher, our team is glad to work through the details with you.

The Cambro Camrack is a polypropylene compartment rack designed to carry glassware securely through every stage of a bar or catering operation — from collection, through the glasswasher, into storage, and back to the service point. The 25-compartment blue version accommodates glasses up to 279mm in height, covering most tumblers, wine glasses, and stemware formats used in licensed premises and catering environments.

In practice, the Camrack removes the repeated handling that causes breakages and slows teams down during busy service. Glassware goes in dirty, travels through the glasswasher inside the rack, air-dries in the rack, and is stored or transported in the same unit. For a high-volume bar or event operation, that reduction in transfer points makes a tangible difference to both throughput and glass loss over time.

Key operational advantages include:

• Single-rack workflow from wash to storage reduces breakage and handling time
• Blue colour coding supports easy sorting across multi-bar or multi-site operations
• Polypropylene construction withstands repeated commercial glasswasher cycles reliably
• Stackable design makes efficient use of storage space behind the bar or in a pot wash area
• Compatible with Camdolly transport dollies and Camrack covers for moving loaded racks safely

If you are setting up a complete system, it is worth considering how many racks your peak service volume requires and whether transport dollies or covers suit your layout. Operations with particularly tall or wide glassware should check glass dimensions against the 279mm maximum height before ordering, as alternative compartment configurations and height capacities are available within the Camrack range.

This rack is well suited to bars, hotels, licensed restaurants, and event catering operations running a high glass turnover. For smaller operations with modest glass volume, fewer racks may be sufficient; larger multi-bar venues may benefit from a fuller system review.

If you are working out how many racks your operation needs or whether this configuration suits your glassware, we are glad to help you think it through.

The Cambro Camrack is a polypropylene glass rack designed to carry glassware through the full back-of-house cycle — from the glasswasher through to storage and back to the bar or service point. This 25-compartment version in blue accommodates stemware and tumblers up to 298mm in height, covering the majority of glassware found in commercial bar and hospitality operations.

Where the Camrack earns its keep is in operations running high glassware volumes with limited time between services. Rather than decanting glasses from a wash rack into a separate storage unit, the Camrack moves directly from the glasswasher to the shelf or trolley as a single unit. That removes a handling step that is both time-consuming and a common cause of breakages. The polypropylene construction holds up well under repeated commercial glasswasher cycles without warping or becoming brittle over time.

From an operational standpoint, the key advantages are:

• Blue colour coding allows quick identification across a multi-rack system
• Rack moves directly from glasswasher to storage, removing a decanting step
• Fewer handling stages means a meaningful reduction in glass breakages
• Compatible with the Cambro Camdolly and Camrack cover for a complete transport and storage system
• Polypropylene withstands repeated high-temperature commercial wash cycles

Before ordering, it is worth confirming that your glasswasher's rack runners and internal clearance will accept the 500mm rack footprint. The Camdolly and cover accessories are sold separately and are worth considering if you are building out a full system.

This rack is well suited to bars, hotels, event caterers, and restaurant operations cycling large quantities of glassware regularly. For smaller operations with modest glass counts, a lower-compartment rack may be a more practical and cost-effective fit. If you are unsure how many racks or which configuration would suit your throughput, we are happy to help you work that out before you place an order.

The Cambro Camrack is a polypropylene glass rack designed to carry glassware through the full cycle of a commercial bar or kitchen operation — from the glasswasher through to storage and back out to service. This blue 20-compartment version accommodates glasses up to 92mm in height and is part of a wider system that includes a compatible dolly and cover, allowing glassware to be washed, stored, colour-coded and transported without ever leaving the rack.

In practice, this kind of system reduces glass handling significantly. Staff aren't transferring glasses between crates and racks at different stages — the same unit goes in the glasswasher, onto the shelf, and out to the bar. That consistency matters during a busy service when breakages and bottlenecks tend to happen at transfer points. The polypropylene construction holds up well to repeated commercial dishwasher cycles without warping or degrading, and the compartmentalised design protects glasses from contact with one another during transit.

Practical benefits include:

• Colour-coding in blue helps separate glass types or sections across multi-area operations
• Reduces handling at each stage, lowering breakage risk during service
• Compatible with the Camdolly for mobile transport around the site
• Stackable with the Camrack cover to enable hygienic stored-glass service
• Uniform sizing supports organised shelving and storage discipline

There are no special installation requirements — this is a passive storage and transport product. The 500 x 500mm footprint is a standard glasswasher rack size, though it is worth confirming compatibility with your specific machine before ordering. The 92mm maximum glass height suits a wide range of tumbler and stemless glassware, but taller wine glasses or certain pint glasses may require a different compartment height variant.

This rack is well suited to bars, hotels, event catering operations, and any site handling significant glass volume where reducing breakage and improving hygiene discipline are priorities. For operations running larger glass counts or needing different compartment configurations, other variants in the Camrack range may be more appropriate.

If you're unsure which compartment size or colour configuration suits your operation, we're happy to talk it through.

The Cambro Camrack is a polypropylene glass rack designed around a straightforward principle: move glassware through the wash cycle and back into service without ever transferring it to a separate storage or transport container. Each rack holds 20 glasses in individual compartments, with a maximum glass height of 133mm, making it suited to standard tumblers, shot glasses, and shorter stemware commonly found in pub, bar, and catering environments.

In busy bar and hospitality operations, the real advantage of the Camrack system is the reduction in glass handling. Glasses load into the rack once, go through the glasswasher in the same rack, and can then be stored or transported directly to the bar or service station — still in the rack. This cuts down on the repeated contact that is both a hygiene risk and a common source of breakages during service peaks.

From a practical standpoint, the system offers several operational benefits:

• Single-rack workflow from collection through wash to storage and service
• Blue colour coding supports easy identification and segregation by glass type
• Polypropylene construction is durable, lightweight, and dishwasher-safe
• Compatible with the Cambro Camdolly and Camrack cover for a complete transport system
• Individual compartments protect glasses and reduce contact breakages

The rack is designed to fit standard commercial glasswashers, but it is worth confirming internal basket dimensions before ordering, particularly if your machine runs a non-standard chamber size. At 500mm square, the rack follows a common footprint, but verification avoids compatibility issues.

This rack is well suited to bars, hotels, event caterers, and contract catering operations handling medium glass volumes. Sites with very high throughput or a wide variety of glass profiles may benefit from reviewing the full Camrack range, which includes alternative compartment configurations and height capacities.

If you are unsure which configuration suits your service setup or want to confirm glasswasher compatibility, our team is happy to talk it through with you.

The Cambro Camrack is a polypropylene glass rack designed to carry glassware through the full handling cycle — glasswasher, draining, storage, and return to service — without glasses ever needing to leave the rack. This 20-compartment version in blue accommodates glasses up to 156mm in height, covering a wide range of standard tumblers and stemless wine glass formats commonly found in bar and hospitality operations.

In high-turnover environments, the value of a rack like this lies in what it removes rather than what it adds. Each unnecessary transfer between carriers is a point where glass breakages occur and service slows down. By keeping glasses in the same rack from wash through to bar, operations reduce handling time and protect stock during peak service periods. The polypropylene construction holds up well under repeated commercial glasswasher cycles, resisting the warping and surface degradation that affects lower-grade alternatives over time.

The blue colour coding becomes particularly useful in multi-rack operations where different compartment sizes are used for different glass types. Assigning colours to configurations makes it straightforward for bar and cellar staff to sort and rotate stock correctly during busy periods without confusion.

• Eliminates glass handling between washing, storage, and service stages
• Blue colour coding supports organised stock rotation across multiple rack sizes
• Polypropylene construction withstands repeated commercial wash cycles reliably
• Reduces breakages caused by unnecessary transfers between carriers
• Compatible with Cambro Camdolly and Camrack cover for a complete transport system

This rack suits bars, hotels, event venues, and contract caterers managing consistent glass volumes. Operations running a broader range of glass sizes may find it worth considering other compartment configurations alongside this one to cover the full inventory.

If you are specifying Camracks across a larger operation or want to confirm compatibility with your existing glasswasher or Camdolly setup, we are happy to talk it through.

The Cambro Camrack is a polypropylene glass rack designed to handle glassware through every stage of the service cycle — from the glasswasher to storage to transport and back to the bar. The blue colour coding helps operations separate glassware types or service areas at a glance, which is particularly useful in venues running multiple bar stations or mixed glassware across a site.

Each rack holds 20 glasses in individual compartments, and the 174mm maximum glass height makes it well suited to standard tumbler and stemware sizes commonly found in pub, hotel, and restaurant bar operations. The compartment design keeps glasses separated during the wash cycle, reducing breakage and allowing water and detergent to circulate properly around each piece. After washing, the rack moves directly into storage or onto the bar without decanting — which is where much of the practical value lies during a busy service period.

Operationally, the Camrack system offers a number of straightforward advantages:

• Colour coding supports quick visual identification of glassware zones or types
• Glasses remain racked from wash through to service, reducing handling and breakage
• Polypropylene construction is robust, lightweight, and easy to keep clean
• Compatible with the Camdolly transport and Camrack cover as part of a complete system
• Standardised 500mm footprint fits most commercial glasswasher baskets

The rack is designed to be used as part of Cambro's wider Camrack system, which includes a Camdolly for floor-level transport and a cover for dust-free storage. Buying into the full system adds more value than using the rack in isolation, so it is worth considering whether covers and a dolly are needed at the same time.

This rack is well suited to bars, hotels, event venues, and licensed restaurants with moderate to high glassware volumes. Operations washing very high volumes across multiple shifts may benefit from having more racks in rotation to maintain flow without waiting on the glasswasher cycle.

If you are unsure how many racks your operation needs, or whether this compartment size is right for your glassware, we are happy to talk it through before you order.

The Cambro Camrack is a polypropylene glass rack designed to handle glassware through multiple stages of a commercial operation without the glasses ever needing to leave the rack. Glassware is loaded, passed through the glasswasher, stored, and transported to the bar or service point all within the same unit. The blue colour coding is a practical feature in busy environments where racks of different sizes or types need to be identified quickly across a bar or pot wash area.

With 20 individual compartments and a maximum glass height of 197mm, this rack suits standard tumbler and stemless wine glass sizes commonly used in pubs, hotel bars, restaurant service areas, and event catering operations. The compartment design keeps glasses separated during the wash cycle, reducing breakage and improving wash results by allowing water and detergent to reach each glass properly. The polypropylene construction handles repeated commercial glasswasher cycles reliably and resists the impact and chemical exposure typical in high-throughput bar environments.

From an operational standpoint, the Camrack system offers a number of practical advantages:

• Reduces glass handling between wash, storage, and service — lowering breakage rates
• Colour coding supports fast rack identification during busy service periods
• Compatible with Cambro's Camdolly for floor-level transport and storage
• Compatible with Cambro rack covers for hygienic storage between services
• Polypropylene construction withstands repeated glasswasher cycles and cleaning chemicals

It is worth confirming that the glasses you intend to use do not exceed the 197mm compartment height before ordering — taller stemware or certain pint glasses will require a rack with deeper compartments. The rack dimensions should also be checked against your glasswasher's internal basket clearance to confirm compatibility.

This rack is well suited to bars, pub operations, hotel food and beverage departments, and event caterers who handle moderate to high glass volumes and want a system that reduces breakage and keeps glassware organised through the full wash and service cycle. For operations running significantly higher glass volumes or requiring a greater number of compartments, larger rack formats are available within the Camrack range.

If you are building out a full Camrack system with dollies and covers, or are unsure which compartment size best matches your glassware, we are happy to help you work through the options.

The Cambro Camrack is a polypropylene glass rack designed to carry glassware through the full cycle of a busy bar or kitchen operation — from glasswasher to storage to service and back again — without transferring glasses between separate containers at each stage. This blue 20-compartment version accepts glasses up to 215mm in height, making it suitable for a wide range of standard tumbler, wine, and stemware profiles commonly used in licensed premises and hospitality kitchens.

The value of the Camrack system in practice is the reduction in handling. Glassware stays in the same rack from the point of collection through washing, through storage on a shelf or dolly, and back to the bar. That continuity reduces breakage risk at transfer points and keeps service moving during busy periods. The polypropylene construction is robust enough for daily commercial use and resists the heat and chemical exposure of repeated glasswasher cycles without warping or degrading.

Practical advantages for operators include:

• Single rack used for washing, storage, transport, and service identification
• Blue colour-coding supports zoning and organisation across multi-rack operations
• Compartmented design prevents glass-to-glass contact and reduces breakage
• Compatible with the Camdolly system for safe, ergonomic rack movement
• Polypropylene construction tolerates repeated commercial glasswasher cycles

These racks are designed to stack and, when used with a compatible Camrack cover, can be stored in a way that protects clean glassware from dust or contamination. Colour-coding by rack type is a straightforward way to manage stock rotation or separate glassware by venue area, which is why the system is commonly used in hotels, contract catering, and larger pub operations where glassware volumes are high.

For sites with particularly tall stemware or a requirement for smaller individual compartments, alternative rack configurations exist within the Camrack range — it is worth confirming glass dimensions before ordering to ensure the right fit.

If you are setting up a full Camrack system or are unsure which rack configuration suits your glassware profile, our team is happy to talk through your requirements.

The Cambro Camrack is a polypropylene glass rack designed to handle glassware through every stage of the back-of-house cycle — washing, storage, transport and identification — without the glasses needing to be moved between different containers. The blue colourway is part of Cambro's rack identification system, making it straightforward to separate glassware types across a busy bar or kitchen pass. This 20-compartment configuration accommodates glasses up to 238mm in height.

In practice, the Camrack is well suited to operations running continuous glassware cycles during service. The rack goes straight from the glasswasher to the shelf or trolley without transferring glasses by hand, which reduces both breakage and handling time. The polypropylene construction holds up well under repeated wash cycles and the rigours of a working bar environment, and the open-compartment design allows water and heat to circulate freely during the wash cycle, supporting thorough cleaning and faster drying.

Key operational advantages include:

• Single-unit system that eliminates redundant handling between wash and service
• Colour-coded design supports clear glassware organisation across multiple rack types
• Compartmented layout protects individual glasses during transport on a dolly
• Polypropylene construction resists warping and staining through repeated use
• Compatible with the Cambro Camdolly and Camrack cover for a complete handling system

It is worth confirming that the glasses you intend to rack will fit comfortably within both the 20-compartment footprint and the 238mm maximum height before ordering. Operations with a wider variety of glass sizes may need more than one rack configuration to cover the full range. The Camrack system includes compatible dolly and cover options if a complete transport solution is needed.

This rack is a practical choice for bars, hotels, event caterers and any operation handling significant glassware volumes daily. Sites with smaller throughput or limited storage may find a lower-compartment count more manageable, while high-volume venues running multiple rack cycles per service may benefit from holding several units.

If you are unsure which rack configuration suits your glassware range or service volume, the team is happy to talk it through.

The Cambro Camrack is a polypropylene glass rack designed to take glassware through the full handling cycle — glass wash, drying, storage, and transport back to the bar — without decanting glasses between containers at any stage. The blue colourway supports colour-coded systems, making it straightforward to separate glass types or track rack contents across a busy operation at a glance.

In practice, the Camrack earns its place wherever glassware handling creates pressure during service. Running glasses directly from the glass wash into storage and back to the bar without repacking reduces breakages, cuts handling time, and keeps service moving at peak. The 20-compartment layout suits standard tumblers and wine glasses up to the stated maximum height, and polypropylene construction tolerates repeated commercial dishwasher cycles without warping or degrading over time.

• Single-rack system eliminates double-handling between wash, storage, and service
• Blue colour coding supports organised glass management across multiple rack types
• Polypropylene resists impact and repeated high-temperature commercial wash cycles
• Compatible with Cambro Camdolly and Camrack covers for a complete transport system
• Stackable design makes efficient use of limited storage space behind the bar

The Camrack is sized to suit most standard commercial glass wash machines and undercounter dishwashers, though it is worth confirming your machine's internal basket dimensions before ordering. If your operation involves transporting glassware between service areas or across floors, the matching dolly and cover are worth considering at the same time to complete the system.

This rack is well suited to pubs, bars, hotels, and event catering operations with regular glassware throughput. For sites running very high glass volumes across multiple service points, a higher-compartment or larger-format rack may give a better fit — worth a conversation before committing to a quantity.

If you are putting together a glass handling system or want to check whether this configuration suits your service volumes, the team is happy to talk it through before you order.

The Cambro Camrack is a polypropylene compartment rack designed to carry glassware through the full service cycle — collection, washing, storage, and transport — without the glasses ever needing to be transferred to a separate container. This blue 20-compartment version accommodates glasses up to 279mm tall, making it suitable for a wide range of tumblers, hi-balls, and stemless wine glasses commonly used in licensed premises and hospitality operations.

The practical value of the Camrack system lies in how it simplifies the glasswashing routine. Staff load the rack once, and it travels through the glasswasher, onto the shelf, and back to the bar as a single unit. That reduction in individual glass handling keeps service moving during busy periods and, over time, noticeably lowers breakage rates — a meaningful saving in any high-volume operation.

• Colour-coded blue finish supports quick visual identification during busy service
• Polypropylene construction is robust, chemical-resistant, and straightforward to keep clean
• Compatible with the Camdolly transport dolly and Camrack cover for a complete handling system
• Stackable design makes efficient use of back-of-house storage space
• Reduces repeated glass handling, lowering breakage risk across the shift

Before ordering, it is worth confirming that your glasswasher's rack aperture is compatible. The Camrack is built to suit standard commercial glasswasher openings, but not every machine is identical, so checking your equipment specification first is sensible. The rack is a solid, substantial unit when loaded — staff should bear this in mind when moving full racks over distance or between levels.

This rack is well suited to pubs, bars, hotel food and beverage operations, and event catering setups where glassware turnover is high and speed of service matters. For operations with significantly higher glass counts or different height requirements, other compartment configurations and capacity options are available within the Camrack range.

If you are putting together a full Camrack system or want to check compatibility with your existing glasswasher, the team is happy to talk through the options with you.

The Cambro Camrack is a polypropylene glass rack built around a straightforward principle: glassware goes into the rack for washing, stays in the rack for storage, and travels in the rack to the service point. The blue colour coding allows operators to distinguish glassware types or sizes at a glance, which matters when multiple rack configurations are in use across a busy bar or banqueting operation. This particular configuration holds 20 compartments and accommodates glasses up to 298mm in height.

In high-turnover environments, the rack earns its place by removing the handling steps that cause most glassware breakages. Glasses do not need to be transferred between a wash basket, a storage tray, and a service carrier — the Camrack is all three. The polypropylene construction holds up reliably under the repeated thermal cycling of commercial glasswashers, and the colour-coded system scales naturally as glassware volume grows.

Practical operational advantages include:

• Wash, store and transport glassware in a single unit, reducing handling
• Blue colour coding supports clear rack identification across mixed operations
• Compatible with Camdolly transport dollies and Camrack covers for hygienic storage
• Polypropylene construction withstands repeated commercial warewashing
• Consistent rack footprint supports organised back-of-house storage

Before ordering, it is worth confirming that your glasswasher interior dimensions will accommodate the rack. The system works best as part of the wider Cambro ecosystem — Camdolly dollies and covers are sold separately and add meaningful value in high-volume or multi-site settings. Taller glassware will require a different compartment configuration with a higher maximum height rating.

This rack is well suited to bars, hotels, event caterers, and licensed restaurants where glassware throughput is consistent and efficient turnaround reduces pressure on service teams. Smaller operations with a limited glassware range may find a lower-compartment configuration more practical, while larger sites running several glass types simultaneously benefit from using multiple colour-coded options in parallel.

If you're working out which Camrack configuration fits your glass range and service volume, the team is glad to help you think it through.

The Cambro Camrack is a polypropylene glass rack designed to handle glassware through every stage of back-of-house operations — washing, drying, storing, and transporting — without transferring glasses between separate carriers. This blue 16-compartment version accommodates glasses up to 92mm in height, making it well suited to standard tumbler and stemless wine glass formats commonly found in pub, bar, and restaurant service environments.

In practice, the value of a system like this lies in reducing handling. Glasses loaded into the rack at the bar or pass go straight through the glasswasher, come out clean, and can be moved directly to the shelf or service point without being unpacked. This cuts breakage risk and saves staff time during busy service periods, particularly where speed of turnaround at the glasswasher matters.

Key practical advantages for operators include:

• Consolidated wash, store, and transport in a single carrier — no repacking
• Colour-coded blue format supports easy identification across multi-rack systems
• Polypropylene construction is durable, lightweight, and easy to sanitise
• Compatible with the Cambro Camdolly and Camrack cover for full system use
• 16-compartment layout suits moderate-volume glass throughput per cycle

The rack measures 500mm x 500mm in footprint, which fits standard glasswasher basket dimensions, though it is worth confirming compatibility with your existing machine before ordering. At 16 compartments, this format suits smaller to mid-sized operations; higher-volume bars or venues cycling large quantities of glassware simultaneously may find a higher-compartment rack more efficient.

If you are building out a full Camrack system with dollies and covers, or are unsure which compartment size or colour coding suits your setup, we are happy to help you work through the options.

The Cambro Camrack is a polypropylene glass rack designed to carry glassware through the entire back-of-house cycle — from collection and washing through to storage and transport — without the glasses ever needing to be removed. The blue 16-compartment version accommodates glasses up to 279mm in height, making it appropriate for a wide range of tumbler and stemless glassware commonly used in hospitality operations.

In busy bar and restaurant environments, the Camrack earns its keep by removing the repeated handling that causes breakages. Glasses go into the rack dirty, pass through the glasswasher in the rack, and come out ready to store or move directly to service. That single-journey approach reduces both glass loss and the time staff spend transferring and sorting between shifts.

From an operational standpoint, the colour-coded system is genuinely useful. Blue racks can be assigned to specific glass types or sections of the bar, which keeps stock organised and simplifies stocktaking. The polypropylene construction is robust enough for the demands of daily commercial use and resistant to the heat and detergent exposure that comes with regular glasswasher cycles.

• Eliminates separate wash, storage and transport stages for glassware
• Colour coding supports glass type segregation and stock control
• Durable polypropylene withstands repeated high-temperature glasswasher cycles
• Reduces glass breakage by minimising unnecessary handling
• Compatible with Cambro's Camdolly and Camrack cover as part of a complete system

The rack is part of Cambro's wider Camrack system, which includes a compatible dolly for floor-level transport and a cover for dust-free storage. For operations running high glass volumes across multiple sections, it is worth considering how many racks are needed to maintain a smooth rotation through wash cycles without creating bottlenecks at the glasswasher.

This rack suits bars, restaurants, hotels and event catering operations where glassware handling efficiency and breakage reduction matter. If your operation involves very tall stemware or unusually large glass formats, it is worth checking compatibility before ordering — we are happy to help you work through the right configuration.