Churchill Phoenix

The Churchill Phoenix longdrink spoon is a 205mm stainless steel spoon designed for use alongside tall glasses — commonly used for cocktails, iced drinks, sundaes, and similar long or layered service. It forms part of Churchill's Phoenix cutlery range, which draws its handle pattern from subtle textural references without being overtly decorative, making it a practical choice where operators want a consistent, contemporary table setting without anything too statement.

Constructed from 18/10 stainless steel with a 3.5mm gauge, these spoons offer a balanced weight in the hand — substantial enough to feel considered, without the heaviness that can make longdrink spoons uncomfortable for guests to use. The 18/10 grade provides reliable resistance to staining and corrosion through repeated commercial dishwasher cycles, which is a practical consideration for any front-of-house operation running high cover volumes.

Supplied in a pack of 12, the Phoenix longdrink spoon suits operations that want a coordinated cutlery range across their table and bar service. The pattern is well suited to restaurants, hotel bars, cocktail lounges, and café-style venues where presentation consistency matters. For sites requiring larger opening stock or running multiple sittings, additional packs are straightforward to add.

If you're building out a full cutlery specification or matching to an existing Churchill range already in use, it's worth a conversation with the team to confirm pattern compatibility and pack quantities before ordering.

The Churchill Phoenix demitasse spoon is a compact coffee spoon designed for espresso and after-dinner coffee covers. Part of Churchill's Phoenix flatware range, it carries a subtly textured finish that gives the piece a contemporary character without drawing attention away from the table setting as a whole. The spoons are made from 18/10 stainless steel with a 2.5mm gauge, which gives them a solid, balanced feel in the hand rather than the lightweight quality associated with lighter-grade cutlery.

In a busy café or restaurant environment, demitasse spoons take a significant amount of daily use — handled repeatedly through service, run through commercial dishwashers, and stacked in cutlery trays between covers. The 18/10 steel grade offers good resistance to staining and corrosion over time, which helps maintain a presentable finish without requiring excessive attention between services.

• Suitable for espresso, macchiato, and after-dinner coffee covers
• 18/10 stainless steel resists staining through repeated commercial dishwashing
• 2.5mm gauge provides a substantial, balanced feel compared to lighter alternatives
• Consistent finish supports a cohesive table presentation across the range
• Supplied in a pack of 12, practical for topping up existing stock

Supplied as a pack of 12, these are a practical choice for operators topping up existing Phoenix cutlery sets or building a new cover from scratch. The demitasse spoon is a high-attrition item in most operations, so buying in multiples is sensible housekeeping.

If you're building out a full flatware specification or matching across a broader table setting, it's worth having a conversation with us — we can help confirm compatibility with other pieces in the Phoenix range and discuss quantities suited to your cover count.

The Churchill Phoenix cocktail fork is a 150mm flatware piece from Churchill's Phoenix range, finished in 18/10 stainless steel. Cocktail forks are typically used for shellfish, appetisers, and small plated starters, and sit alongside a full cocktail or side cover in formal and semi-formal table settings.

In a busy front-of-house environment, consistent flatware presentation matters. The Phoenix range is designed to hold its appearance through repeated commercial dishwasher cycles, and the 18/10 stainless steel composition provides solid resistance to staining and surface corrosion — both relevant concerns in high-turnover service environments where cutlery is cycled frequently through warewashers.

Practically, the Phoenix cocktail fork suits operations that want a uniform, contemporary look across their table setting without excessive expenditure on flatware. The pack of 12 is a useful unit for operators building out cover counts or replacing attrition losses in an existing set.

It is worth considering your full cover requirement before ordering. Cocktail forks are often purchased in smaller quantities than main course or dessert flatware, but high-volume sites or those running multiple sittings may need several packs to maintain adequate circulation between covers and the wash cycle.

If you are fitting out a full restaurant, bar, or private dining space and want guidance on quantities or coordinating pieces within the Phoenix range, our team is happy to help you work through the numbers.

The Churchill Phoenix cocktail spoon is a 147mm flatware piece from Churchill's Phoenix collection, crafted from 18/10 stainless steel with a 3mm gauge. The design draws on subtle textured detailing and is intended to sit comfortably within a considered table or bar setting without drawing attention away from the overall presentation.

In operational terms, cocktail spoons of this length are commonly used for stirring drinks, layering cocktails, and presenting desserts or small plates at the pass. The 18/10 stainless steel grade offers good resistance to staining and tarnishing, which matters when pieces are cycled through a commercial glasswasher or dishwasher repeatedly during service. The 3mm gauge gives the spoon a solid feel without excessive weight, which helps with consistent handling across a busy bar shift.

Supplied in a pack of 12, the Phoenix cocktail spoon is a practical choice for venues looking to maintain a cohesive flatware aesthetic across the bar and dining room. The collection pairs with other Churchill Phoenix flatware pieces, which can simplify sourcing for operators building or refreshing a full cover setup.

For lower-volume settings or venues trialling a new flatware style, a single pack of 12 will likely be sufficient to start. Busier operations or those running multiple bar stations may want to consider holding additional stock to allow for breakage, loss, and rotation through the wash cycle.

If you're unsure how many pieces suit your cover count or whether Phoenix fits the broader table setting you're working with, we're happy to help you work through the options.

The Churchill Phoenix teaspoon is a straightforward, well-made piece of flatware from a range designed for everyday commercial use. Produced in 18/10 stainless steel with a 3mm gauge, the spoon carries a solid feel in the hand without being heavy — a balance that works well in table service environments where guests handle cutlery repeatedly throughout a sitting.

The Phoenix pattern takes its visual cue from fine surface texturing, giving the spoon a degree of design interest while remaining appropriate for a wide range of dining contexts, from casual cafés to mid-market restaurants. The finish is resistant to staining and discolouration, which matters in operations running high-temperature commercial dishwashers several times a day.

In practical terms, the key qualities that make this range a reliable choice for operators are:

• 18/10 stainless steel construction resists rust and staining under heavy commercial wash cycles
• 3mm gauge provides a balanced feel without adding unnecessary weight
• Consistent finish across the pack supports a uniform table presentation
• Supplied in a pack of 12, suitable for topping up existing stock or outfitting smaller covers

It is worth noting that this is a teaspoon-only pack. Operators building a full cutlery set should confirm the rest of the Phoenix range is available to ensure a consistent pattern across all pieces. For higher-volume sites or operations expecting significant cutlery attrition, larger pack formats may be a more practical purchase.

If you are unsure how many covers to stock for or whether this range suits your service style, we are happy to talk it through.

The Churchill Phoenix soup spoon is part of a coordinated flatware range designed for professional table settings. Made from 18/10 stainless steel with a 3.5mm gauge, these spoons offer a balanced weight and a finish that holds up well to repeated commercial dishwashing cycles. The Phoenix pattern draws on a subtle textured design that works across a range of dining styles, from casual restaurant covers to more formal hotel dining.

In practice, 18/10 stainless steel is the standard specification for commercial cutlery expected to withstand daily machine washing without discolouring or corroding over time. The gauge is substantial enough to feel considered in the hand without being overly heavy — which tends to suit most covers well.

• Resistant to staining and corrosion under regular commercial washing
• Coordinated with other pieces in the Churchill Phoenix range
• Balanced weight suitable for a broad range of dining formats
• Supplied in a pack of 12, practical for topping up existing stock

These are supplied in packs of 12, which makes them straightforward to order in multiples aligned to your cover count. They sit comfortably alongside other Churchill Phoenix pieces if you are building or completing a matched set.

If you are unsure how many packs to order for your cover count or whether Phoenix is the right range for your table concept, we are happy to help you work that out.

The Churchill Phoenix side plate knife is a table knife designed for use alongside bread, side dishes, or starters. Part of Churchill's broader Phoenix flatware collection, it is made from 18/10 stainless steel with a 7mm gauge, giving it a solid feel in the hand without being cumbersome. The pattern draws on subtle textural detailing that reads as contemporary without being directional — useful for operators who want a look that ages well across a changing menu or seasonal décor.

In day-to-day service, 18/10 stainless holds up well under repeated commercial dishwashing cycles. The higher nickel content helps resist staining and corrosion over time, which matters when cutlery is being turned around several covers a night. The gauge is substantial enough to feel considered on the table without contributing unnecessary weight to a place setting.

Supplied in a pack of 12, this format suits operators looking to top up an existing Phoenix cover or introduce the range to a new section. Key practical points worth noting:

• 18/10 stainless steel construction with good resistance to staining
• 7mm gauge provides a balanced feel at the table
• 186mm length appropriate for a side plate or starter setting
• Pack of 12 suits cover top-ups or single-station restocking
• Part of a wider Phoenix collection for matched table presentations

The Phoenix range is well suited to mid-market restaurants, hotel dining, and contract catering environments where a clean, consistent table presentation is required. For high-turnover operations needing larger opening quantities, it is worth considering whether a full-range order makes more practical sense than individual packs.

If you are building out a full cover specification or matching Phoenix across multiple cutlery types, the team is happy to help you work through quantities and pack formats before you order.

The Churchill Phoenix Dessert Knife is part of Churchill's Phoenix flatware collection, a range built around a clean, contemporary profile with a lightly textured finish that takes its character from the subtle patterning of desert sands. The knives are manufactured from 18/10 stainless steel, which offers a good balance of corrosion resistance and surface durability — a practical choice for pieces that pass through commercial dishwashers repeatedly throughout a service.

In a busy hospitality setting, cutlery takes considerable punishment. The 18/10 grade holds up well against the aggressive detergents and high temperatures used in commercial glasswashers and dishwashers, and the finish is less prone to pitting and tarnishing than lower-grade alloys. For front-of-house teams, this means the pieces continue to present well over time without requiring constant polishing or early replacement.

Supplied as a pack of 12, the Phoenix Dessert Knife suits restaurants, hotels, and event caterers looking to build or extend a consistent table setting. The balanced weight and gauge make it comfortable to handle, which is a small but noticeable detail when guests are using cutlery throughout a multi-course meal.

As with any flatware purchase, it is worth considering how these will integrate with your existing cover setup — particularly if you are mixing collections from different ranges. The Phoenix collection covers a broad spread of pieces, so building a cohesive setting within the range is straightforward. For very high-volume operations with rapid cover turnaround, it may be worth discussing pack quantities and stock depth before ordering.

If you would like a hand working out quantities or checking compatibility with your current table setup, the team is happy to help.

The Churchill Phoenix dessert fork is a mid-weight flatware piece from a pattern designed to sit comfortably within a modern table setting. The Phoenix range carries a subtle textured finish that references natural forms without being overtly decorative — suitable for contemporary restaurants, hotels, and event dining where a clean, considered aesthetic is expected.

Constructed from 18/10 stainless steel, these forks offer reliable resistance to staining and corrosion under regular commercial dishwasher cycles. The gauge provides a balanced feel in the hand — not so light as to feel disposable, not so heavy as to feel out of place with lighter table settings. For front-of-house teams, that consistency matters when laying covers at volume.

• 18/10 stainless steel construction resists staining through repeated dishwasher cycles
• Balanced gauge suited to everyday dessert service without feeling flimsy
• Textured Phoenix pattern works across a range of table setting styles
• Supplied in a pack of 12, practical for topping up existing stock
• Consistent with other pieces in the Churchill Phoenix flatware range

These forks are well suited to restaurants, hotels, contract caterers, and event venues that want a reliable, presentable dessert fork without committing to a premium price point. They are not a fine-dining-weight piece, so operators running a formal à la carte service may want to compare against heavier-gauge options in the wider Churchill range before ordering.

If you are building out a complete cover or matching against existing Churchill Phoenix pieces, the team are happy to help confirm compatibility across the range.

The Churchill Phoenix dessert spoon is a straightforward, well-made piece of flatware from a pattern widely used across UK restaurant and hotel dining. It is produced from 18/10 stainless steel with a gauge that gives the spoon a solid, balanced feel in the hand — neither too light to feel flimsy nor too heavy for comfortable use. The finish has good resistance to staining and discolouration, which matters in a commercial environment where cutlery passes through industrial dishwashers repeatedly over its working life.

In day-to-day service, 18/10 flatware at this gauge holds up well under regular machine washing without the surface dulling quickly. The Phoenix pattern has a clean, contemporary profile that sits comfortably alongside a wide range of tableware without drawing attention away from the cover. It is a practical choice for operations that want a consistent, polished table presentation without investing in premium silverware.

Supplied in packs of 12, the Phoenix dessert spoon suits most standard ordering and stock management approaches. Operations running larger dining rooms or high covers per service may want to consider ordering multiple packs to maintain adequate float and allow for breakage and attrition over time.

If you are building out a full cutlery selection or matching pieces across a range, our team is happy to advise on quantities, complementary pieces within the Phoenix pattern, and how different flatware specifications compare in practice.

The Churchill Phoenix steak knife is part of a coordinated cutlery range designed for professional table settings in restaurants, hotels, and similar hospitality environments. The design takes its visual cues from subtle textured patterns, giving the range a contemporary feel without straying into anything too distinctive to work across different cover styles.

In day-to-day service, steak knives take a fair amount of handling — passed between covers, run through commercial dishwashers repeatedly, and stacked in cutlery trays. The 18/10 stainless steel construction holds up well under that routine, resisting staining and maintaining a presentable finish over a sustained period of use. The 8mm gauge gives the knife a reassuring weight in hand, which most front-of-house teams find reduces the sense of disposability that lighter cutlery can give guests.

Practical considerations for front-of-house operations:

• Supplied as a pack of 12 — useful for extending an existing Phoenix setting or equipping a section
• 18/10 stainless steel offers good resistance to staining and corrosion in commercial dishwasher cycles
• The gauge and balance reduce the likelihood of guests perceiving the cutlery as lightweight or insubstantial
• Consistent with the wider Phoenix range for operators building a matched table setting

A pack of 12 suits operators topping up an existing stock of Phoenix cutlery, or those equipping a smaller section. Larger openings or high-turnover venues will typically require multiple packs to achieve the par levels needed across a full service without running short between washes.

If you're building out a full table setting or need guidance on quantities for your cover count, the team is happy to talk it through.

The Churchill Phoenix table knife is a mid-weight piece from Churchill's Phoenix flatware collection, finished in 18/10 stainless steel. The 18/10 grade denotes the chromium and nickel content within the steel, which contributes to the knife's resistance to tarnishing and staining under regular commercial washcycle conditions. The design draws on a subtly textured handle profile, making it a practical choice for operators who want a cohesive, presentable table setting without veering into overtly decorative territory.

In a busy dining environment, flatware takes considerable punishment — repeated machine washing, handling by kitchen and front-of-house teams, and the inevitable knocks of daily service. The Phoenix knife's gauge gives it a balanced feel in the hand without being so lightweight that it reads as cheap to the guest. It holds its finish well under regular commercial dishwasher use, which reduces the time spent polishing and pulling substandard pieces before service.

• 18/10 stainless steel construction resists tarnishing and staining over time
• Balanced weight suits a range of dining styles from casual to mid-market
• Supplied in a pack of 12, practical for topping up existing cover sets
• Consistent with other pieces in the Phoenix range for a uniform table presentation

Supplied in packs of 12, the Phoenix table knife is well suited to restaurants, hotel dining rooms, and contract catering operations looking to maintain consistent cover presentation. It sits comfortably in the mid-market flatware bracket — appropriate for settings where durability and appearance both matter, though operators running very high-end fine dining covers may find a heavier-gauge option better suited to their standard.

If you're unsure whether the Phoenix range is the right fit for your cover style or service volume, we're happy to talk it through.

The Churchill Phoenix table fork is a mid-weight piece of flatware from Churchill's Phoenix range, finished in 18/10 stainless steel. The 18/10 grade provides good resistance to staining and corrosion, which matters in commercial environments where cutlery passes through high-temperature glasswashers and dishwashers repeatedly across a long service life. The design carries a textured finish that gives the range a degree of visual interest without being overtly decorative — it sits comfortably in contemporary restaurant, hotel, and bistro settings.

Supplied in packs of 12, Phoenix table forks are a practical choice for operators who need to maintain consistent table covers without mismatched pieces. Having a reliable matching range available means replacing individual items over time is straightforward, which is a practical consideration worth factoring in when selecting flatware for front-of-house use.

• 18/10 stainless steel construction resists staining through regular commercial dishwasher cycles
• Textured finish suits contemporary table settings without heavy styling
• Consistent weight and balance across the Phoenix range for a uniform table cover
• Supplied in packs of 12, suitable for incremental stock building
• Compatible with other pieces in the Churchill Phoenix flatware range

For lower-budget operations or high-turnover environments where cutlery loss is a regular cost, lighter-gauge or more economical flatware options may be worth considering. Equally, for fine dining where tactile weight is a priority, a heavier-gauge range may be more appropriate. Phoenix sits sensibly in the middle ground for most mid-market hospitality settings.

If you're equipping a new operation or refreshing your flatware across multiple covers, it's worth having a conversation about quantities and whether a full range purchase makes more sense than incremental packs. We're happy to help work through what you need.

The Churchill Phoenix table spoon is part of a coordinated cutlery collection designed for use in restaurants, hotels, and hospitality venues where consistent table presentation matters. The pattern draws on a subtle textured finish that adds quiet visual interest without being decorative to the point of impracticality. Supplied in a pack of 12, it is a straightforward choice for operators looking to build or maintain a cohesive cover set.

In day-to-day service, 18/10 stainless steel at this gauge holds up well to repeated commercial dishwasher cycles, resisting the surface dullness and spotting that cheaper alloys tend to develop over time. The weight and balance feel considered rather than lightweight, which tends to matter to front-of-house teams handling cutlery throughout a busy service.

A few practical points worth bearing in mind:

• 18/10 stainless steel offers good corrosion and stain resistance under regular commercial washing
• Consistent gauge weight supports a uniform feel across a matched cover set
• Pack of 12 suits top-up purchasing as well as initial setup
• Part of the wider Phoenix collection, so soup spoons, dessert spoons, and other pieces are available to match

As with any cutlery pattern, it is worth confirming the full collection range available before committing to a large order, particularly if you are building an entirely new cover. If you are unsure how many pieces to order for your typical cover count and service rotation, we are happy to help you work through that.