Cold Rooms

The Polar U-Series walk-in cold room is a fully integral chiller unit — meaning the refrigeration system is built into the structure itself, with no remote condenser, no external ducting, and no separate plant room required. At 1.5 metres wide by 1.2 metres deep, it offers a usable chilled storage volume of 2843 litres, making it a practical choice for kitchens that have outgrown reach-in refrigeration but don't yet require a larger custom cold room installation.

In operational terms, the unit is built to hold a stable temperature of 2°C to 5°C even when the surrounding ambient temperature reaches 43°C — a meaningful consideration for kitchens with poor ventilation or those operating through a busy summer service. Forced-air cooling circulates refrigerated air evenly throughout the space, which supports consistent food safe temperatures across the full storage volume rather than relying on static cold zones. The design also draws moisture away from the interior, helping to reduce humidity and the spoilage that can come with it.

From a practical standpoint, this unit offers several operational advantages worth noting:

• Integral refrigeration system eliminates the need for a remote condenser or additional plant space
• Dovetail panel joining and fully rebated lockable door supports both thermal efficiency and security
• R449A refrigerant with a lower global warming potential than older refrigerants
• Suitable for high-ambient environments, maintaining consistent temperatures in warm kitchen conditions
• Galvanised steel, aluminium, and plastic construction suited to the demands of commercial use

The unit weighs 350kg and stands 2200mm high, so the installation location needs to be assessed for structural floor loading, adequate ceiling clearance, and a level surface before fitting. The price includes a site survey, delivery to mainland UK, professional installation, and commissioning — no additional trade is required on your part. Racking and shelving are sold separately and should be factored into your setup budget. If the unit is to be installed outdoors or in a semi-exposed location, a weather-resistant roof panel is available separately and should be considered at the point of order. This is a special-order product and is non-returnable once ordered.

This size of cold room is well suited to small-to-medium kitchens — gastro pubs, cafés, small hotel operations, or independent restaurants with moderate daily throughput. It is not well suited to high-volume operations receiving large daily deliveries or running extended service periods where access will be very frequent. For those environments, a larger footprint unit is likely to serve better. Equally, if your current reach-in refrigeration is coping adequately, it may be worth reviewing whether a walk-in is the right step at this stage.

If you're unsure whether this footprint is right for your kitchen layout, storage volume, or service demands, our team is happy to talk it through before you commit to an order.

The Polar U-Series integral walk-in cold room is a factory-assembled, self-contained refrigerated storage unit. Unlike modular cold rooms that require a separate remote refrigeration plant, this unit arrives with its refrigeration system built in, simplifying installation and reducing the number of trades required to commission it. The galvanised steel, aluminium, and plastic panel construction encloses a substantial chilled storage envelope — practical for any operation where a bank of upright refrigerators or undercounter units simply cannot provide the volume of chilled storage the kitchen demands.

In a working kitchen, cold-holding consistency is not optional. The U-Series uses a forced-air cooling system that supports reliable temperature recovery after door openings — relevant during busy prep shifts or when stock is being delivered and checked. The unit uses R449A refrigerant, which carries a lower global warming potential than older refrigerants and is aligned with current UK and EU environmental requirements. This is worth bearing in mind for operators who need to demonstrate environmental compliance.

A number of design details translate into practical day-to-day advantages:

• Self-closing door with flush seals helps limit cold loss during frequent access
• Lockable door includes an internal safety release, a meaningful consideration for any staffed kitchen
• Non-slip floor surface reduces slip risk when moving stock in and out
• Coved floor-to-wall junctions make routine cleaning more manageable and limit dirt build-up
• Durable outer construction stands up to the physical demands of a commercial storage environment

Installation requires a level, solid floor capable of bearing considerable structural load — the unit weighs 375kg unloaded, and that figure increases substantially once the unit is stocked. A mains electrical supply is required; confirm the specific supply requirements with your installer before ordering. If the unit is to be sited outdoors or in a semi-exposed area, a weather-resistant roof panel should be ordered separately. Internal racking and shelving are not included and will need to be selected to suit your storage layout.

This footprint is well suited to mid-to-large restaurant kitchens, hotel operations, event catering facilities, and similar environments where chilled storage volume is a genuine operational constraint. For smaller kitchens with lower throughput, a compact walk-in or large upright refrigerator may be the more proportionate choice. Sites handling very high stock volumes or operating in particularly warm ambient conditions may find a larger footprint or higher-capacity model from the same range better suited to their needs.

If you are working through whether this footprint is the right match for your site and storage volumes, we are glad to talk it through before you commit.

The Polar U-Series walk-in cold room is a fully integral chiller unit supplied and installed as a complete package. Built from galvanised steel, aluminium and plastic panel construction, it arrives as a self-contained cold room system with the refrigeration unit built in — there is no need to source a separate condensing unit or arrange independent refrigeration installation. It is designed to operate as a standalone storage environment for fresh and chilled produce in commercial kitchen settings.

The refrigeration system is built to maintain stable temperatures across a consistent chilling range, and is rated to perform reliably in ambient conditions up to 43°C — which matters in warm kitchen environments or where the unit is positioned in a poorly ventilated area. Forced air cooling ensures even temperature distribution throughout the storage space rather than relying on passive cold air movement, which helps protect product quality during frequent access.

From an operational standpoint, the U-Series is practical to live with day to day:

• Fully rebated lockable door closes flush with the panels, improving security and reducing cold air loss
• Integral design removes the need for separate refrigeration plant or external condensing unit
• Smooth internal surfaces support straightforward cleaning and hygiene compliance
• Suitable for indoor and outdoor installation, expanding siting flexibility
• R449A refrigerant used in line with current environmental regulations

The purchase price includes a site survey, delivery to mainland UK, professional installation and commissioning. This is worth factoring into any budget comparison with flat-pack or self-install alternatives. The unit is heavy — at 425kg it will require appropriate ground-level access and a floor capable of bearing the loaded weight. For outdoor installations, a weather-resistant roof covering is available separately and should be considered during the survey. Racking and shelving are not included and will need to be specified alongside the order.

A 1.5 x 2.1m footprint suits kitchens with moderate to substantial fresh produce requirements — typically restaurants, hotel kitchens, catering operations or food production environments where a reach-in refrigerator would be insufficient. For sites with higher throughput or bulk storage demands, larger footprint options are available within the range. This is a special-to-order product and is non-returnable once commissioned, so it is worth being confident in the sizing before proceeding.

If you are weighing up the right footprint, internal layout or siting arrangements for your kitchen, the team is happy to talk it through before you commit.

The Polar U-Series walk-in cold room is a fully integral chiller unit, meaning the refrigeration system is entirely self-contained within the structure. There is no remote condenser, no external ducting, and no separate plant room to accommodate — the compressor and all associated components are built into the unit itself. This particular model is finished in olive green and is sized at 2.1 metres wide by 1.5 metres deep, offering a gross storage capacity of 5,303 litres.

In a busy commercial kitchen, consistent holding temperature is everything. The U-Series is rated to maintain its operating range even when ambient temperatures in the surrounding environment reach 43°C — a relevant consideration for hot kitchen environments or poorly ventilated back-of-house areas. Forced air circulation helps ensure an even temperature throughout the cabinet rather than relying on natural convection, which matters when the room is being accessed repeatedly during service. The jointing and door design are engineered to retain cold air effectively, which supports both temperature stability and energy efficiency.

From a practical standpoint, the integral design offers a number of advantages for operators:

• No external plant room or condenser space required, simplifying installation planning
• Lockable, rebated door reduces cold air loss and supports security
• Moisture management built into the design helps reduce internal humidity
• Suitable for operation in high-ambient environments up to 43°C
• R449A refrigerant, a lower global warming potential alternative to older refrigerants

Installation is included in the price and covers site survey, delivery, professional fitting, and commissioning. This is a mainland UK service only. The unit weighs 425kg, so access routes, floor loading, and the intended installation position should all be assessed ahead of delivery — the site survey will address this. If the unit is to be installed outdoors or in a semi-exposed location, a weatherproof roof panel is available separately and should be considered. Internal racking is not included and is sold separately.

This model is well suited to small-to-medium food businesses that need a reliable, self-contained cold store without the infrastructure demands of a remotely condensed system — cafés, small hotel kitchens, butchers, bakeries, and similar operations are common fits. For higher-throughput sites or larger footprint requirements, higher-capacity configurations within the U-Series range are available. This product is special-to-order and non-returnable, so it is worth taking time to confirm the specification is correct before ordering.

If you are unsure whether this footprint is the right fit for your operation, or have questions about the installation process, our team is happy to talk it through with you before you commit.

The Polar U-Series walk-in cold room is a fully integral refrigerated storage room supplied and installed as a complete unit. It is designed to hold consistent chilling temperatures across a large storage area, making it a practical solution for operations that have outgrown reach-in refrigeration or multi-door cabinets and need a dedicated, high-capacity cold store on site.

The refrigeration system is built to maintain a stable internal temperature even when ambient conditions reach as high as 43°C — a relevant consideration for kitchens with poor ventilation, external installations in summer months, or sites in warmer UK regions. Forced air cooling circulates cold air evenly throughout the room, helping to prevent warm spots that can affect food safety and quality in larger storage spaces. The rebated lockable door closes flush against the wall panels, which reduces cold air loss during access and makes the door considerably more difficult to force, a practical security benefit for high-value stock.

From an operational standpoint, this unit offers several day-to-day advantages:

• Large accessible storage area reduces time spent locating and retrieving ingredients during service
• Even air circulation supports consistent temperatures throughout the room, not just near the evaporator
• Flush-fitting rebated door helps retain internal temperature during frequent access periods
• Smooth internal surfaces are straightforward to clean in line with HACCP requirements
• Suitable for indoor or outdoor installation, giving flexibility in site planning

This cold room is supplied with a site survey, delivery, professional installation, and commissioning included in the price — available to mainland UK locations. Installation will require adequate floor space and load-bearing capacity given the assembled weight of the unit. If the room is to be installed externally, a weather-resistant roof is available separately and should be factored into planning. Racking and shelving are not included and are sold separately. As a special-to-order product, this unit is non-returnable once ordered, so it is worth confirming all site measurements and access routes prior to placing an order.

This size of room is well suited to mid-sized kitchens — busy restaurants, hotel operations, catering companies, and similar — where daily stock volumes justify a dedicated cold store but a larger modular installation is not yet necessary. For sites with significantly higher throughput or where a freezer room is also required, there are larger-format and combination options worth considering. Equally, for smaller operations or tighter sites, a more compact unit may be more appropriate.

If you are unsure whether this footprint suits your site or workflow, we are happy to talk it through — getting the room size right from the outset avoids costly changes later.

The Polar U-Series integral walk-in cold room is a self-contained chilling unit designed for commercial kitchens, food production sites, and hospitality operations that need reliable bulk cold storage. Unlike modular cold rooms that require a remote condensing unit, this model houses all refrigeration components within the structure itself, making it a practical choice where plant room space is limited or where outdoor installation is planned.

In operational terms, the integral refrigeration system is engineered to maintain consistent internal temperatures even when the surrounding ambient temperature climbs as high as 43°C — relevant for busy kitchen environments, outdoor events facilities, or warmer regions of the UK. The forced-air cooling circulates temperature evenly throughout the storage area, which matters when you are storing a mix of product types across a large floor area. Recovery after door openings — which in busy service periods can be frequent — is handled reliably by the system without significant temperature drift.

From a day-to-day operational standpoint, several design choices translate into practical advantages:

• Fully rebated lockable door closes flush against the wall panels, improving security and reducing cold air loss
• Integral design removes the need for separate plant room space or external condensing unit installation
• Smooth internal surfaces support straightforward cleaning routines and food hygiene compliance
• Suitable for both indoor and outdoor siting, broadening installation options
• R449A refrigerant specification reflects current environmental and regulatory standards

This unit is supplied with site survey, delivery, professional installation, and commissioning included — covering mainland UK locations. The weight of 435kg means floor load capacity and access routes to the installation point should be assessed in advance. The purchase price covers the cold room structure and refrigeration only; racking and shelving are sold separately and will need to be factored into your planning. If the unit is to be installed outdoors, a weather-resistant roof is available as a separate accessory and should be considered as part of the installation plan rather than an afterthought.

A footprint of 2.1 x 1.8 metres suits medium-volume operations — catering companies, hotel kitchens, larger restaurant and pub kitchen setups, and food production units with consistent chilled storage requirements. For sites with very high throughput or those needing walk-in freezer rather than chiller capability, alternative models with different footprints or temperature ranges may be worth exploring. Equally, smaller operations with more modest storage needs might find a smaller footprint more appropriate to their space and budget.

If you are unsure whether this size is the right fit for your service volume, or if you have questions about site suitability and installation, our team is happy to talk it through with you before you commit.

The Polar U-Series walk-in cold room is a fully integral chilled storage unit, meaning the refrigeration system is built directly into the structure itself. There is no remote condenser, no separate plant room, and no additional ducting to arrange. The unit arrives as a flat-pack panel system, assembled and commissioned on site as part of the included installation service, which covers site survey, delivery, professional fitting, and commissioning across mainland UK.

In day-to-day service, the unit is designed to hold stable chilled temperatures consistently, even in warmer back-of-house environments where ambient conditions can be demanding. Forced-air cooling helps distribute temperature evenly throughout the storage space rather than relying on static cold zones — which matters in busy kitchens where the door is opened regularly and the unit needs to recover without compromising stored product.

The integral design carries a number of clear practical advantages for operators:

• No external condenser or plant room required, simplifying installation considerably
• Dovetail panel joining and a rebated lockable door reduce air infiltration and support energy retention
• Moisture management in the interior helps protect stored produce and reduce humidity build-up
• Suitable for ambient conditions up to 43°C, making it viable in kitchens where heat accumulation is a concern
• R449A refrigerant offers a lower global-warming-potential aligned with current industry practice

Before confirming placement, floor load capacity should be verified — the installed weight is substantial, and this is particularly relevant on upper floors or mezzanine-level kitchens. Because the unit is assembled on site from panels, access routes and doorway widths need to be considered at the planning stage. Internal racking and shelving are sold separately, and if outdoor positioning is intended, a weatherproof roof panel will also be required. A suitable electrical supply must be available at the installation point.

This configuration is well suited to small restaurants, cafés, deli counters, and catering operations with a moderate volume of chilled stock. It provides meaningful storage capacity without the footprint commitment of a larger installation. Operations with significantly higher throughput, multiple service covers, or large-scale fresh produce requirements may find a higher-capacity configuration more appropriate for their needs.

Walk-in cold rooms involve a number of site-specific decisions — floor preparation, positioning relative to heat sources, electrical supply, and workflow considerations all influence how well the unit performs over time. If it would help to talk through whether this configuration is the right fit for your site, the team is happy to have that conversation before you go ahead.

The Polar U-Series integral walk-in cold room is a fully self-contained chilled storage unit designed for commercial kitchens that need serious bulk storage capacity. Unlike modular systems that require remote condensers or external ducting, this unit houses all refrigeration components within the structure itself, making it a practical choice for both indoor installation and outdoor placement where space or building layout makes a remote condenser system awkward to accommodate.

In busy kitchen environments, cold room performance is often judged on how well the unit holds temperature during periods of repeated door access — deliveries, prep rushes, service. The U-Series refrigeration system is built to maintain accurate cooling control even when ambient temperatures in the surrounding environment are high, which is relevant for kitchens where the cold room sits close to cooking equipment or in areas with limited ventilation. The 80mm insulated wall panels with a dovetail joining system contribute to overall thermal efficiency and help keep running costs in check over time.

From an operational standpoint, key practical advantages include:

• Fully integral design — no remote condenser or ducting required
• Self-closing door that sits flush with the panels for a secure, reliable seal
• High ambient temperature tolerance, well suited to hot kitchen environments
• Thick insulated panels that support consistent internal temperatures and efficiency
• Available in Van Dyke Brown, suitable where aesthetics or colour-coding matter

This unit is supplied with site survey, professional installation, and commissioning included — a meaningful consideration given the weight and the electrical requirements involved. It is available to mainland UK locations only. If the cold room is to be installed outdoors, a weather-resistant roof covering may be required and is available separately. Racking and shelving are not included and will need to be sourced independently. This product is special-to-order and non-returnable, so it is worth confirming the installation location, floor loading, and electrical supply arrangements before ordering.

This size of cold room is well suited to mid-sized catering operations — restaurants, hotel kitchens, school catering facilities, or event venues — where significant chilled storage is needed but a larger walk-in installation would be disproportionate. For sites with higher throughput or more demanding volume requirements, larger room configurations within the U-Series range are worth considering. Equally, for smaller operations, a more compact cold room may be a better fit.

If you are unsure whether this configuration suits your space, workflow, or installation conditions, our team is happy to talk through the options before you commit.

The Polar U-Series integral walk-in cold room is a self-contained chilled storage unit designed for commercial kitchens that need serious bulk refrigeration capacity. Built from galvanised steel, aluminium, and plastic panel construction, it arrives as a modular room you assemble on-site — no remote refrigeration plant required, as the refrigeration system is built directly into the unit. It operates on the R449A refrigerant and holds a consistent chilled temperature throughout its substantial internal volume.

In a working kitchen environment, a walk-in of this footprint is genuinely useful for high-volume prep operations, catering establishments with significant daily deliveries, or sites that need to hold large quantities of raw ingredients, dairy, or chilled produce across a service period. The refrigeration system is rated to maintain temperature even when the ambient temperature reaches 43°C, which matters in kitchen environments where surrounding heat from cooking equipment can climb significantly. The forced-air cooling arrangement helps maintain an even temperature throughout the storage space rather than relying on natural convection, which reduces the risk of warm spots near the door.

Practically, this unit has been designed with operational hygiene and safety in mind:

• Self-closing door seals flush against the panel walls, reducing cold air loss between uses
• Lockable door with an internal safety release to prevent accidental lock-ins
• Non-slip flooring as standard to reduce slip risk in a busy kitchen
• Coved internal floor-to-wall junctions limit dirt accumulation and simplify cleaning
• Grey exterior finish with galvanised steel and aluminium panel construction

Installation requires a level, load-bearing floor surface capable of supporting the assembled unit — at 375kg unladen, and considerably more when stocked, this is not a lightweight structure. You will need a suitable single-phase or three-phase electrical supply depending on your site configuration; confirm this with a qualified electrician before ordering. If the unit is to be installed outdoors or in a partially exposed area, a weather-resistant roof panel is available separately and should be considered. Internal shelving and racking are not included and will need to be ordered to suit your storage requirements.

This cold room is well suited to mid-to-large catering operations — hotel kitchens, contract caterers, busy restaurant groups, or large pub kitchens where a standard upright refrigerator no longer meets the volume demand. Sites with very high throughput, multiple kitchen teams working simultaneously, or significantly larger delivery volumes may find a larger footprint or higher-capacity configuration better suited to their operation.

If you are unsure whether this footprint is the right match for your kitchen layout, storage volumes, or electrical supply, our team is happy to talk it through before you commit to an order.

The Polar U-Series walk-in cold room is a fully integral refrigerated storage unit — meaning the refrigeration system is built into the room itself, with no need for remote condensers, external pipework, or ducting runs. This makes it a practical choice for sites where a separate plant room is not available or where installation complexity needs to be kept to a minimum. The unit arrives in Olive Green and is built from galvanised steel, aluminium, and plastic panels.

In a working kitchen environment, consistent temperature holding matters more than the headline figure. This unit is rated to maintain its chilled storage range even when ambient temperatures reach 43°C, which is a realistic concern in busy kitchen spaces during peak summer service. Forced air cooling circulates throughout the interior to prevent warm spots and supports reliable food safety across the full storage area — important when the room is opened and closed frequently through a service period.

The practical advantages of this unit are worth considering in operational terms:

• Integral design removes the need for remote refrigeration infrastructure
• Dovetail panel joining and fully rebated door construction help retain cold temperatures efficiently
• Lockable door supports HACCP compliance and stock security
• Moisture management in the design helps reduce humidity build-up inside the room
• R449A refrigerant reflects current environmental standards for commercial refrigeration

Installation is included in the price and covers site survey, delivery, and professional set-up — available to mainland UK locations. The unit is heavy at 375kg, so floor loading and access routes should be assessed beforehand. If the room is being installed in an outdoor or semi-exposed location, a weather-resistant roof section is available separately and should be considered. This product is special-to-order and non-returnable, so it is worth confirming all site requirements before ordering. Internal racking and shelving are sold separately.

This size of cold room is well suited to small to medium-sized commercial kitchens — pub kitchens, small hotel operations, independent restaurants, and similar sites where a walk-in is preferable to multiple upright units but overall throughput does not yet demand a larger footprint. Sites with significantly higher stock volumes or more frequent access requirements may be better served by a larger-format unit from the same range.

If you are unsure whether this footprint will work for your site layout or service requirements, our team is happy to talk through the options before you commit.

The Polar U-Series integral walk-in cold room is a self-contained chilled storage unit designed for commercial kitchens requiring substantial, reliable refrigerated capacity. Unlike modular cold room systems that require separate refrigeration plant, this integral unit houses the refrigeration system within the structure itself, simplifying installation and reducing the need for additional mechanical equipment. The grey galvanised steel, aluminium, and plastic construction provides a robust, commercially appropriate finish suited to back-of-house environments.

In operational terms, this cold room is built to maintain consistent chilled temperatures even when the surrounding ambient temperature rises significantly — a relevant consideration for sites where the unit may be sited in a warm kitchen, loading bay, or external position. The forced-air cooling system circulates cold air evenly throughout the interior, which helps protect stock quality and reduces temperature stratification during frequent door openings — a common issue in high-throughput operations where staff access the room regularly throughout a service.

From a practical standpoint, several design details translate well into day-to-day kitchen operation:

• Self-closing door seals flush against the cold room walls, reducing cold air loss and supporting lower running costs
• Lockable door with an internal safety release mechanism to prevent accidental lock-ins — a requirement under most food safety and health and safety guidelines
• Non-slip floor surface reduces slip risk in a working cold room environment
• Coved internal floor-to-wall junctions limit dirt and liquid build-up, making routine cleaning more straightforward
• R449A refrigerant is a lower-GWP option compared to older refrigerants, which may be relevant to operators considering environmental compliance

On installation, the unit's 400kg weight means structural floor loading should be confirmed before siting, particularly in older or upper-floor locations. The unit is intended for indoor installation as standard; if outdoor placement is required, a weather-resistant roof panel is available separately and should be factored into the project. Internal racking and shelving are not supplied with the unit and will need to be sourced separately — worth planning before installation so the room is operational from day one. Access routes to the installation site should be checked given the assembled dimensions, as delivery in parts or via specific access points may need coordinating.

This cold room is well suited to mid-sized catering operations — restaurants, hotel kitchens, catering production units, and similar sites — where walk-in chilled storage is needed but available footprint is limited. The 1.8 x 1.8m floor area provides meaningful storage capacity without requiring the space demands of larger walk-in configurations. For higher-volume operations or sites needing a greater storage footprint, larger variants within the U-Series range are worth considering. Equally, if your requirement is more modest, a smaller integral cold room may be a more proportionate fit.

If you're unsure whether this size and specification is right for your site — or if you have questions about installation requirements or internal fit-out — our team is happy to talk it through with you before you commit.

The Polar U-Series integral walk-in cold room is a self-contained chilled storage unit designed for permanent installation in commercial kitchens, prep areas, and back-of-house environments. It arrives as a flat-pack panel system that assembles on site, with the refrigeration unit built in rather than specified and fitted separately. The result is a straightforward route to significant chilled storage without the complexity of a bespoke remote refrigeration system.

In service, the unit is built to maintain consistent chilled temperatures even when the surrounding ambient temperature climbs — a practical consideration for kitchens without full climate control, or for sites where the unit may be positioned in a warmer part of the building. The forced-air refrigeration system keeps temperatures stable throughout the internal space rather than relying on still-air cooling, which helps protect produce quality and supports food safety compliance during busy service periods.

Several practical design details are worth noting for day-to-day operation:

• Self-closing door seals flush against the cold room walls, reducing temperature fluctuation and energy draw
• Lockable door with an internal safety release to prevent accidental lock-ins
• Non-slip floor panel for safe access during service
• Coved floor-to-wall junctions to limit dirt accumulation and simplify cleaning
• Grey galvanised steel and aluminium panel construction, suited to demanding kitchen environments

Installation requires a level, load-bearing floor capable of supporting the assembled unit — at 350kg fully built, subfloor suitability is worth confirming before delivery. The integral refrigeration unit runs on a standard single-phase supply, but electrical connection should be carried out by a qualified engineer. If the unit is to be sited outdoors or in an exposed location, a weather-resistant roof panel is available separately and should be factored into the installation plan. Racking and shelving are not included and will need to be ordered to suit your storage requirements.

This footprint suits smaller independent restaurants, cafés, deli counters, and pub kitchens that need reliable walk-in chilled storage but do not have the volume to justify a larger modular installation. For higher-volume operations — central production kitchens, large event catering facilities, or sites with very high ambient temperatures — a larger capacity unit with a heavier-duty refrigeration specification may be more appropriate.

If you are weighing up the right footprint or refrigeration capacity for your site, our team is happy to work through the requirements with you before you order.

The Polar U-Series integral walk-in cold room is a self-contained chilled storage unit designed for commercial operators who need reliable, accessible cold storage beyond the capacity of reach-in refrigeration. The unit arrives as a complete package — panels, refrigeration system, and door — and is installed on-site by Polar's own engineers. The purchase price includes site survey, delivery, professional installation, and commissioning. Available to mainland UK locations only.

In a working kitchen environment, consistent temperature retention is critical. This unit uses forced-air refrigeration to maintain an even chill throughout the interior, and the refrigeration system is rated to perform in ambient temperatures up to 43°C — making it suitable for kitchens and back-of-house areas that can get warm during busy service. The rebated, lockable door closes flush to the wall panels, which reduces cold-air loss when the room is in regular use and provides a practical level of security for stored produce.

Key operational benefits include:

• Integral refrigeration — no separate remote condensing unit required
• Forced-air cooling for consistent temperature distribution across all shelf levels
• Flush-fitting rebated door that helps retain temperature between openings
• Suitable for both indoor and outdoor installation
• Smooth internal surfaces designed to support routine cleaning without difficulty

Because the unit is integral rather than remote-condensing, it does not require an external plant room or refrigerant pipework run. It does require a suitable single-phase electrical supply and adequate clearance around the condenser for ventilation — your site survey will confirm specific requirements before installation is booked. If the unit is to be installed outdoors, a weather-resistant roof panel is available separately and should be considered. Racking and shelving are sold separately and are not included as standard. This product is special-to-order and cannot be returned once manufactured.

This size of cold room suits small to medium catering operations — busy café kitchens, pub catering, small hotel back-of-house, or event catering facilities — where a walk-in is needed but floor space is limited. It works well as a primary cold store for high-turnover produce or as a dedicated allergen or dietary-specific storage area. For larger operations or higher-volume sites with frequent access requirements throughout the day, a wider or deeper configuration may be more appropriate; equally, smaller footprint options are available if space is the primary constraint.

If you're unsure whether this footprint is right for your site or have questions about installation requirements, the team is happy to talk through your specific situation before you place an order.

The Polar U-Series walk-in cold room is a fully integral chiller unit — meaning the refrigeration components are built into the structure itself, with no remote condenser or external ducting required. This 2.1 x 1.8 metre model offers substantial chilled storage capacity and is supplied in olive green, making it a practical choice where colour-coded storage areas are part of kitchen management or allergen segregation protocols.

In a busy kitchen environment, consistent temperature maintenance is critical. The forced-air cooling system is designed to hold stable conditions even when the unit is accessed frequently during service, and it has been rated to operate reliably in ambient temperatures up to 43°C — relevant for kitchens where the surrounding environment can become warm during peak cooking periods. The R449A refrigerant used is a lower-GWP option, which is increasingly relevant for operators with sustainability reporting requirements.

From an operational standpoint, this unit offers several practical advantages:

• Integral design removes the complexity of split-system installation and ongoing condenser maintenance
• Dovetail panel jointing and a fully rebated lockable door help maintain temperature integrity and reduce energy consumption
• Moisture management within the design helps control internal humidity, which supports food quality and shelf life
• The olive green finish allows colour-coded storage separation where kitchen protocols require it

This unit is supplied with a site survey, professional installation, and set-up as standard — it is not a self-install product. Access to the installation location needs to accommodate the assembled footprint; the unit weighs 435kg and will require appropriate floor loading and handling consideration. If installed in an outdoor or semi-exposed position, a weather-resistant roof is available separately. Internal racking and shelving are sold separately and should be factored into your planning. This product is special-to-order and non-returnable, so it is worth confirming your space requirements and intended use before placing an order. Available to mainland UK locations only.

This model is well suited to mid-sized catering operations — restaurants, hotels, pub kitchens, and contract catering sites — where a dedicated, accessible chilled storage area is needed without the infrastructure demands of a remote-condenser system. For higher-volume operations with greater throughput or more frequent access patterns, a larger-footprint model from the range may be a better fit; equally, smaller sites may find a more compact configuration sufficient.

If you are unsure whether this size and specification is right for your kitchen layout, throughput, or ambient conditions, the team is happy to talk it through before you commit.

The Polar U-Series integral walk-in cold room is a self-contained chilling unit built for commercial kitchens, catering operations, and food storage environments where reliable, high-volume refrigeration is needed within a defined footprint. At 2.1 metres wide by 2.1 metres deep, it offers a practical storage capacity suited to medium-to-high-volume operations. The refrigeration system is fully integral, meaning the unit arrives as a complete, ready-to-install package rather than requiring separately sourced condensing equipment.

The system is designed to maintain a stable temperature range throughout service, including in demanding ambient conditions — the refrigeration components are rated to operate reliably in ambient temperatures up to 43°C, which makes the unit suitable for installation in poorly ventilated back-of-house areas or outdoor covered locations where summer temperatures can cause problems with lesser units. Forced air cooling helps to distribute temperature evenly throughout the storage space, which matters when the room is accessed repeatedly during a busy service.

Key practical advantages of this unit include:

• Fully rebated lockable door that closes flush against the wall panels, reducing forced-entry risk and helping retain internal temperature
• Integral refrigeration system — no separate remote condenser installation required
• Suitable for both indoor and outdoor installation
• Smooth, easy-clean internal surfaces that support good hygiene practice
• R449A refrigerant, which meets current environmental regulations

Installation is included in the price and covers site survey, delivery, professional fitting, and commissioning — available to mainland UK locations. The unit is supplied in white and constructed from galvanised steel, aluminium, and plastic panels. Given the 450kg assembled weight, access routes and floor loading should be assessed prior to installation. If sited outdoors, a weather-resistant roof cover may be required and is available separately. Racking and shelving are not included and are sold separately. This product is special-to-order and non-returnable once placed.

This cold room is well suited to mid-sized catering operations — restaurants, hotel kitchens, school catering facilities, and similar environments where a permanent, walk-in chilling solution is needed but a large-format room would be disproportionate. For sites with significantly higher throughput or larger storage demands, heavier-duty and larger-footprint alternatives are available. For smaller operations or sites where a modular unit of this scale is not practical, smaller upright or under-counter refrigeration may be more appropriate.

If you are weighing up whether this size and configuration is right for your kitchen layout and storage volumes, our team is happy to talk through the options — it is worth a conversation before placing an order on a unit of this kind.

The Polar U-Series walk-in cold room is a fully integral chilling unit supplied, delivered, and professionally installed as a complete package. Built from galvanised steel, aluminium, and plastic panel construction, it is designed to function as a standalone cold store within an existing building — or, with the appropriate weatherproof roof panel, in a covered outdoor location. The refrigeration system uses R449A refrigerant and is built into the unit, so there is no requirement for a remote condensing unit or separate plantroom space.

In a working kitchen environment, the key demand placed on a walk-in cold room is consistent temperature retention during frequent access. The U-Series is rated to maintain its operating temperature in ambient conditions up to 43°C, which makes it practical for kitchen sites where the surrounding environment runs warm — a common issue in basement prep areas, bakery environments, and busy production kitchens operating through extended service periods. The forced-air cooling system circulates cold air throughout the store rather than relying on passive cooling, which supports more even temperature distribution across the full storage volume.

From an operational standpoint, several design decisions translate into day-to-day advantages:

• The fully rebated door closes flush with the wall panels, improving both temperature retention and physical security
• The lockable door reduces the risk of unauthorised access to stored goods
• The integral design means no exposed refrigeration pipework to maintain or protect
• Internal surfaces are straightforward to clean down during regular hygiene routines
• Suitable for indoor or outdoor installation, giving flexibility on siting

Installation is included in the price and covers site survey, delivery to mainland UK, and full professional set-up. This is a special-to-order product and is non-returnable once manufactured. It is worth confirming access routes before ordering — at 375kg the assembled unit requires adequate doorway clearance and appropriate floor loading capacity. Racking and shelving are sold separately, so storage configuration should be considered alongside the room itself. If the unit is to be sited outdoors, a weatherproof roof panel is available separately and should be specified at the point of order.

This size of cold room — offering just over 4,400 litres of gross capacity — is well suited to small independent restaurants, cafés with significant fresh produce throughput, pub kitchens, and small catering operations that need dedicated cold storage beyond what undercounter or upright refrigeration can provide. It is less likely to be adequate for high-volume production kitchens, large banqueting operations, or sites with multiple daily deliveries requiring bulk storage; for those applications a larger footprint model would be worth considering.

If you are unsure whether this size is right for your site, or have questions about the installation requirements for your specific location, we are happy to talk it through before you commit to an order.

The Polar U-Series walk-in cold room is a fully integral, self-contained chilled storage unit designed for commercial kitchens that need reliable bulk refrigeration. With the refrigeration system built into the unit itself, there is no requirement for remote condensers or external ducting, which simplifies both installation and ongoing maintenance considerably.

In operational terms, the integral cooling system is well suited to kitchens with high ambient temperatures — the unit is rated to maintain its temperature range in ambient conditions up to 43°C, making it a practical choice for busy kitchen environments where heat build-up around equipment is common. The forced-air cooling design helps maintain consistent temperatures throughout the interior, which is important when staff are accessing the room frequently during a busy service. Recovery after door openings is reliable, meaning produce stored inside is not subject to prolonged temperature fluctuation.

From a day-to-day operational perspective, the key advantages are worth noting:

• Self-closing door with flush-panel fitting improves both hygiene and security
• 80mm insulated wall panels with dovetail jointing support thermal efficiency
• Integral design removes the cost and complication of a remote condenser installation
• R449A refrigerant meets current environmental compliance requirements
• Van Dyke Brown finish suits sites where the unit is visible in a storage or service area

This unit is available for installation in both indoor and outdoor locations, though an external weather-resistant roof will be required for outdoor siting and is sold separately. The unit weighs 425kg, so floor loading and access routes should be assessed before installation. The price includes a site survey, delivery, professional installation, and commissioning — mainland UK only. Racking and shelving are not included and should be specified separately. As a special-order item, this cold room is non-returnable once ordered, so it is important to confirm the specification before placing an order.

A 2.1 x 1.5m footprint at just over 5,300 litres gross capacity is well suited to small-to-medium catering operations, pub kitchens, and independent restaurants with moderate bulk storage requirements. Sites with higher throughput or greater storage demands may find a larger footprint more appropriate for their operation.

If you are unsure whether this size is the right fit for your kitchen layout or service volumes, the team is happy to talk through the options before you commit to an order.

The Polar U-Series walk-in cold room is a self-contained chilled storage unit designed for commercial kitchens that need reliable, high-volume refrigeration in a dedicated room format. This 1.8 x 1.8 metre model operates as a fully integral unit, meaning the refrigeration system is built in — there is no requirement for remote condensers, external ducting, or a separate plant room. The unit arrives ready to install and is commissioned by Polar's installation team as part of the purchase price, which covers site survey, delivery, professional installation and set-up.

In operational terms, the U-Series is built to hold consistent chilled temperatures across heavy daily use. The forced-air cooling system maintains an even temperature throughout the room, which is important for compliance and food quality when large volumes of produce are being stored and accessed repeatedly during service. The unit is rated to perform in ambient temperatures up to 43°C, making it suitable for kitchens where the surrounding environment gets warm — a practical consideration in many busy back-of-house spaces. Moisture management is handled through the room's internal design, which draws away humidity to help protect produce and maintain hygiene standards.

Key practical advantages for kitchen operators include:

• Fully integral refrigeration — no remote plant or ducting required
• Dovetail panel joining and rebated lockable door retain temperature efficiently
• Forced-air cooling distributes temperature evenly throughout the room
• Rated to operate reliably in ambient temperatures up to 43°C
• Available in Olive Green with a galvanised steel, aluminium and plastic construction

There are several practical points to be aware of before ordering. This unit is special-to-order and is non-returnable once placed. Racking and shelving are not included and will need to be sourced separately. The unit weighs 400kg, so structural floor loading should be considered during the site survey stage. If the cold room is to be installed in an outdoor or partially exposed location, a weather-resistant roof panel is available separately. Installation is available to mainland UK locations only.

This model is well suited to mid-sized catering operations — restaurants, hotels, contract caterers and event kitchens — where a separate walk-in chiller is needed but a full-scale refrigeration plant room is not practical. For smaller operations with modest storage needs, a reach-in or under-counter refrigeration solution may be more appropriate. Equally, for high-throughput sites storing very large volumes across multiple categories, a larger footprint or higher-capacity walk-in configuration is worth considering.

If you are unsure whether this footprint is right for your kitchen layout or storage volumes, we are happy to talk it through before you commit.

The Polar U-Series integral walk-in cold room is a self-contained chilled storage unit designed for professional kitchen environments where bulk storage capacity is a genuine operational requirement. Unlike modular panel rooms that require a separate remote condensing unit, the integral design houses the refrigeration system within the unit itself, simplifying installation and reducing the need for external plant space. It holds product within a standard chiller temperature range and is constructed from galvanised steel, aluminium, and plastic panels.

In practice, this cold room is well suited to kitchens that need to hold large volumes of fresh produce, dairy, or prepared foods across a busy service week. The refrigeration system is rated to operate in ambient conditions up to 43°C, which makes it a reliable choice in kitchen environments where background temperatures are elevated — particularly during summer or in sites with limited ventilation. Forced air cooling helps maintain a consistent temperature throughout the interior rather than relying on passive circulation, which matters when staff are accessing the room repeatedly during service.

Several practical details are worth noting from an operational standpoint:

• Self-closing door seals flush against the cold room walls, reducing temperature loss during busy service periods
• Lockable door with an internal safety release prevents accidental lock-ins — an important compliance consideration
• Non-slip floor surface reduces slip risk in a working cold store environment
• Coved floor-to-wall junctions limit dirt accumulation and make cleaning more straightforward
• R449A refrigerant, a lower-GWP alternative to older HFC refrigerants, aligns with current environmental regulations

Installation requires a level, load-bearing floor capable of supporting the unit's assembled weight. The integral condensing unit means no remote plant room is needed, but adequate ventilation around the unit should be confirmed before siting. If the cold room is to be installed outdoors or in a semi-exposed location, a weather-resistant roof kit is available separately and should be factored into the installation plan. Internal racking and shelving are not included and will need to be specified separately to suit your storage layout.

This cold room is most appropriate for medium-to-large catering operations — busy restaurants, hotel kitchens, event catering facilities, school kitchens, or food production sites — where a single accessible, high-capacity chilled store is preferable to multiple upright units. For sites with significantly higher throughput or more demanding ambient conditions, it is worth considering whether a larger footprint or remotely condensed room might serve better. Equally, for smaller operations, there are lower-capacity options in the range that may represent a better fit.

If you are unsure whether this footprint and configuration is right for your site, our team is happy to talk through the specifics before you commit to a purchase.

The Polar U-Series integral walk-in cold room is a self-contained chilled storage unit built for commercial kitchens that need serious bulk capacity. Unlike modular systems that require separate refrigeration plant to be plumbed in remotely, this is a fully integrated unit — the refrigeration system is built in, which simplifies installation and reduces the number of separate components to maintain. It is constructed from galvanised steel, aluminium, and plastic panel materials and is designed to maintain a stable chilled environment across a range of ambient conditions, including kitchens and back-of-house areas where ambient temperatures can climb significantly during service.

In a working kitchen environment, consistent temperature recovery is one of the most important performance factors for a walk-in cold room. Frequent door openings during a busy service period place real demand on the refrigeration system, and this unit is built to sustain chilled conditions even under that kind of repeated access. The forced-air cooling arrangement supports even temperature distribution throughout the storage space, which is particularly important where produce is stored across multiple shelving levels.

From an operational standpoint, this unit includes a number of features that reduce both food safety risk and day-to-day management burden:

• Self-closing door with flush wall seal, supporting consistent temperature retention
• Lockable door with an internal safety release to prevent accidental lock-ins
• Non-slip floor surface, important in any cold environment where condensation is a risk
• Coved floor-to-wall junctions, which limit dirt accumulation and simplify cleaning
• R449A refrigerant, a lower-GWP alternative to older refrigerants

Installation requires a level, load-bearing floor capable of supporting a fully stocked unit of this size. The unit is designed for indoor installation; if outdoor placement is being considered, a weather-resistant roof panel is available separately and should be factored into the project from the outset. Shelving and racking are not supplied and will need to be ordered to suit your intended storage layout. It is worth confirming your electrical supply and available floor space before purchase, and ensuring adequate clearance around the unit for door swing and maintenance access.

This cold room is well suited to mid-to-large kitchens, catering operations, and food production environments where bulk chilled storage is a daily operational requirement — hotels, contract caterers, larger pub kitchens, and food prep facilities would be typical applications. For smaller operations with more modest storage needs, a compact walk-in or a multi-door upright refrigerator may represent a more proportionate investment. For sites handling exceptionally high throughput or requiring extended storage runs, it is worth considering whether a larger footprint unit would better serve the operation long-term.

If you are working through a kitchen fit-out or have questions about whether this unit suits your layout and service volume, we are happy to talk it through before you commit to a purchase.

The Polar U-Series walk-in cold room is a fully integral chiller unit designed for commercial kitchens and food storage environments that require reliable, high-capacity refrigeration in a self-contained format. At 1.8 metres wide by 1.8 metres deep, it provides a practical bulk storage solution where a reach-in cabinet is no longer sufficient and a built-in cold room is not feasible or desirable. The unit ships as a complete package including site survey, delivery, professional installation, and set-up — making it a straightforward choice for operators who need a ready-to-use cold room without managing multiple contractors.

In real-world kitchen environments, the forced-air refrigeration system maintains consistent internal temperatures even when the surrounding ambient temperature reaches 43°C — a meaningful consideration for kitchens that run hot during service, or for sites where the unit is positioned in a non-air-conditioned area. Temperature is held reliably across the full internal space, reducing the risk of uneven cooling and the food waste that follows from it. The refrigeration components are built to cope with frequent door opening during busy service periods without significant temperature fluctuation.

From an operational standpoint, this cold room delivers several practical advantages:

• Fully rebated lockable door closes flush with the wall panels, improving both security and temperature retention
• Integral design means no external condensing unit to position, pipe, or maintain separately
• Suitable for both indoor and outdoor installation, giving flexibility on siting
• Easy-clean interior surfaces reduce time spent on deep cleaning
• Powered by R449A refrigerant, a lower-GWP option replacing older refrigerant types

Installation is carried out by Polar's professional team and is included in the price, covering mainland UK locations. The unit weighs 400kg when assembled, so structural floor loading and access routes should be assessed in advance — your site survey will address this. Because the unit is special-to-order and installed on-site, it is non-returnable, so getting the specification right before ordering is important. If the cold room is to be sited outdoors, a weather-resistant roof cover is available separately and is worth factoring into your planning from the outset. Racking and shelving are sold separately and should be ordered alongside the unit to avoid delays in getting the room operational.

This model is well suited to independent restaurants, pub kitchens, hotels, event catering operations, and small food production units that need substantial chilled storage capacity without a full built-in cold room installation. The 5,487-litre capacity handles serious stock volumes, though for very high-throughput operations or multi-temperature storage requirements, a larger footprint or multi-room configuration may be worth considering.

If you are unsure whether this size is the right fit for your storage volumes, or you have questions about siting and installation logistics, the team is happy to talk it through before you commit to an order.

The Polar U-Series walk-in cold room is a fully integral chilled storage unit, meaning the refrigeration system is entirely self-contained within the structure itself. There is no requirement for remote condensers or external ducting, which simplifies both the installation process and the ongoing maintenance picture considerably. This particular model is finished in olive green and is supplied and installed as a complete package — the price includes a site survey, delivery, professional installation, and commissioning.

In operational terms, the U-Series is built to perform in demanding environments. The forced-air refrigeration system maintains stable chilled temperatures even when kitchen ambient temperatures reach elevated levels, which makes it reliable through busy summer service periods as well as in kitchens where background heat builds up throughout the day. The dovetail panel joining system and fully rebated lockable door help retain internal temperature when the room is accessed frequently — an important consideration in kitchens where the cold room is used continuously during service.

The practical advantages of this unit for day-to-day kitchen operation include:

• Integral design eliminates remote plant room requirements and reduces installation complexity
• Lockable door with rebated seal supports temperature retention and food safety compliance
• Moisture management built into the design helps reduce humidity inside the room
• Refrigerant R449A supports lower environmental impact compared to older refrigerant types
• Galvanised steel, aluminium, and plastic construction suited to heavy commercial use

Installation requires a level floor capable of supporting the unit's loaded weight, adequate electrical supply, and sufficient clearance for the door to open fully and for air to circulate around the condenser. The unit is intended for indoor installation; if siting outside is required, a weather-resistant roof cover is available separately. Racking and shelving are not included and will need to be specified and ordered separately. This product is special-to-order and non-returnable once commissioned. Supply and installation are available to mainland UK locations only — a site survey is conducted prior to installation to confirm suitability.

This size of cold room is well suited to small restaurants, cafés, delis, and catering operations with moderate chilled storage requirements. It works particularly well where a dedicated walk-in is needed but kitchen footprint is limited. For higher-volume operations or sites requiring greater storage capacity, larger configurations within the U-Series range are available. Equally, smaller operators with lighter storage needs may find a more compact solution better suited to their throughput.

If you're unsure whether this footprint is right for your operation, or if you have specific questions about installation at your site, our team is happy to talk it through before you commit.

The Polar U-Series walk-in cold room is a purpose-built integral chiller designed for serious commercial storage requirements. Unlike modular panel systems, this unit arrives as a complete assembly, making it straightforward to site without needing specialist cold room construction. It operates as a chiller across a standard temperature range suited to fresh produce, dairy, and prepared food storage, and the refrigeration system is rated to perform reliably even when the surrounding ambient temperature rises to 43°C — a practical consideration for kitchens with poor ventilation or outdoor installations in warmer months.

In a busy kitchen environment, a walk-in room at this size earns its place quickly. The forced-air cooling system recovers well after repeated door openings during service, which is where smaller under-counter or upright units begin to struggle. The internal layout is open and accessible, giving prep teams clear visibility of stock and good freedom of movement. For operations running a large weekly food order or managing several different product categories under refrigeration, the usable footprint makes rotation and HACCP compliance considerably more manageable than relying on multiple smaller units.

Operationally, this cold room has been designed with working kitchens in mind rather than simply storage volume:

• Self-closing door improves energy efficiency and reduces temperature drift during service
• Internal safety release prevents accidental lock-in — a legal and welfare consideration for any commercial site
• Non-slip floor reduces slip risk in a chilled, potentially damp environment
• Coved floor-to-wall junctions limit dirt accumulation and simplify deep cleaning
• Lockable door adds a layer of stock security for high-value produce

Installation should be planned carefully at the specification stage. The unit requires a level, solid floor capable of supporting a fully stocked room at this scale, and adequate clearance around the condensing unit for ventilation and servicing access. It is available in grey as standard, with a galvanised steel, aluminium, and plastic construction. If siting outdoors or in a partially exposed location, a weather-resistant roof panel is required and sold separately — this is worth factoring into the budget at the outset. Internal racking and shelving are not included and will need to be ordered to suit your intended layout.

This model is well suited to mid-to-large independent kitchens, hotel operations, event catering facilities, and food production environments where a single high-capacity chiller makes more operational sense than several smaller units. It is not a match for sites where space is severely restricted or where a blast-chill function is needed alongside standard refrigeration. For larger sites with greater throughput demands or where a deeper footprint would be more practical, higher-capacity configurations are available within the range.

If you are unsure whether this footprint is right for your layout, or if you have questions about electrical supply, drainage, or floor loading ahead of installation, the team is happy to talk it through before you commit.

The Polar U-Series walk-in cold room is a fully self-contained chiller unit designed for commercial food storage at scale. Unlike modular cold rooms that require remote condensers or external ducting, this is an integral unit — all refrigeration components are housed within the structure itself, which simplifies both installation and ongoing maintenance. The Van Dyke Brown finish makes it a practical choice for operators who need a cold room that can sit in view without looking out of place.

In kitchen environments, the ability to maintain stable temperatures under pressure matters considerably. The refrigeration system is engineered to hold its operating range even when the surrounding ambient temperature climbs as high as 43°C — relevant in kitchens where the cold room sits close to cooking equipment or in poorly ventilated storage areas. Recovery after door opening is reliable, which is important in kitchens where staff access the unit repeatedly during service. The 80mm insulated wall panels with a dovetail joining system contribute to thermal efficiency and help reduce internal humidity, which in turn supports food quality and minimises unnecessary energy consumption.

From an operational standpoint, this unit offers a number of practical advantages:

• Self-closing, flush-fitting door reduces cold loss and improves security
• Integral refrigeration removes the need for remote condenser installation
• Suitable for both indoor and outdoor placement
• R449A refrigerant with low global warming potential
• Straightforward panel construction simplifies future servicing access

Installation is included in the price and covers site survey, delivery, and professional set-up by Polar's approved engineers — available to mainland UK locations. The unit weighs 375kg when fully assembled, so floor load capacity and access routes should be assessed in advance. If the cold room is to be positioned outdoors, a weather-resistant roof panel is available separately and should be factored into planning. Racking and shelving are not included and will need to be specified separately based on your storage requirements.

At 1.5 x 1.8 metres with a 4,483-litre gross capacity, this cold room is well suited to small restaurants, cafés, food production units, and catering operations that need reliable bulk chilled storage without the footprint of a full walk-in installation. It is best viewed as a primary cold store rather than a supplementary unit. For operations with significantly higher throughput or stock volumes, larger configurations are available within the U-Series range.

If you are unsure whether this footprint will work for your storage volumes, or you have questions around floor preparation and access, our team is happy to talk through the specifics with you before you commit to an order.

The Polar U-Series walk-in cold room is a fully integral chiller unit, meaning the refrigeration system is self-contained within the structure itself. There is no need for remote condensers or external ducting, which simplifies both the installation process and the ongoing maintenance picture considerably. It is designed to hold chilled produce at a consistent temperature across a usable capacity that suits a wide range of commercial kitchen operations.

In service, the unit handles the demands of a busy kitchen environment well. The forced-air cooling system maintains stable internal conditions even when ambient temperatures in the surrounding space are high — the refrigeration is rated to perform reliably in ambient conditions up to 43°C, which matters in kitchens where summer temperatures and heat from cooking equipment can push the air hard. Recovery after frequent door openings is effective, and the design actively draws moisture away from the interior to help manage humidity levels.

From an operational standpoint, the practical advantages are worth noting:

• Integral design removes the complexity and cost of a remotely installed refrigeration system
• Dovetail panel joining and a fully rebated lockable door improve thermal retention and security
• Humidity management within the unit helps protect produce quality and reduce spoilage
• R449A refrigerant supports a lower environmental impact compared to older refrigerant types
• The galvanised steel, aluminium and plastic construction is practical for commercial cleaning regimes

Installation requires adequate floor space and a level surface capable of supporting a loaded unit of this scale — at 435kg empty, the structure is substantial and the floor loading when stocked should be factored in. The unit is supplied with a site survey, professional installation and set-up included in the price, and is available to mainland UK locations. It is a special-to-order product and non-returnable once commissioned. If siting the unit outdoors or in a partially exposed area, a weather-resistant roof panel is available separately and is worth considering. Racking and shelving are not included and will need to be specified alongside the unit.

This cold room is well suited to catering operations that need reliable bulk chilled storage — high-volume restaurants, hotel kitchens, event catering facilities, school or hospital catering, and food production environments where consistent temperature holding across a large usable volume is essential. For smaller operations where floor space is limited, a smaller-footprint integral cold room may be more appropriate. For sites with significantly higher throughput or more demanding ambient conditions, it is worth discussing a heavier-duty option.

If you are planning a new cold room installation or replacing existing chilled storage, we are happy to talk through the site-specific details before you commit — getting the sizing and positioning right first time avoids complications down the line.

The Polar U-Series walk-in cold room is a fully self-contained chiller unit — no remote condenser, no ducting, and no separate plant room required. The refrigeration system is entirely integral to the structure, which simplifies installation considerably and makes it a practical choice for both indoor and outdoor settings. This model is finished in Van Dyke Brown and is supplied, delivered, and professionally installed as part of the package price, covering mainland UK locations.

In operational terms, the unit is built to handle the sustained demand of a working kitchen. The forced-air cooling system maintains a consistent temperature even when ambient conditions are high, which matters in kitchens where heat from cooking equipment can affect surrounding areas. The 80mm insulated wall panels use a dovetail joining system that limits heat ingress and keeps internal humidity in check — both of which help protect perishable stock and reduce unnecessary compressor cycling. The self-closing door sits flush within the panel assembly, which improves thermal retention during busy service periods when the door is opened frequently.

• Integral refrigeration — no remote condenser or external plantwork needed
• Forced-air cooling maintains stable temperature even in warm ambient conditions
• 80mm insulated panels with dovetail jointing reduce heat ingress and humidity
• Self-closing, flush-fitting door supports temperature recovery between openings
• Suitable for indoor or outdoor installation with appropriate weatherproofing

For installation, this unit requires a single-phase electrical supply and a level, load-bearing floor capable of supporting the unit's weight when fully stocked. If positioned outdoors, a weather-resistant roof panel should be considered and is available separately. Internal racking and shelving are not included and will need to be sourced alongside the unit. As a special-to-order product, it is non-returnable once ordered, so it is worth confirming the specification before proceeding.

At this footprint, the unit is well suited to small to medium-sized catering operations — café kitchens, pub kitchens, small restaurant operations, or deli preparation areas where dedicated chilled storage is needed but a full walk-in installation is not feasible. For sites with higher throughput or larger teams accessing the cold room regularly, a unit with greater floor area may be worth considering. Equally, if the footprint feels larger than your operation currently needs, smaller configurations are available in the same range.

If you are weighing up whether this size is right for your operation, or want to talk through installation requirements before committing, the team is happy to help you work through the details.

The Polar U-Series walk-in cold room is a fully integral, standalone refrigerated storage unit — meaning the refrigeration system is built into the structure itself, with no remote condenser or external ducting required. This 2.1 x 2.1 metre model provides a gross capacity of 7,677 litres and is finished in Van Dyke Brown, making it a practical choice where a neutral or site-matched external appearance matters. It is suitable for both indoor and outdoor installation.

In demanding kitchen environments, temperature stability is critical. The U-Series is engineered to maintain accurate, consistent cooling even when ambient temperatures reach 43°C — a common challenge in busy production kitchens during summer service. Forced air cooling reduces internal humidity, which helps protect produce quality and reduces the rate of spoilage during heavy-use periods. The 80mm insulated wall panels with a dovetail joining system contribute to thermal efficiency and structural rigidity over long-term use.

From an operational standpoint, the design addresses a number of day-to-day practicalities:

• Self-closing door seals flush within the panels, reducing cold air loss during high-traffic access
• Integral refrigeration removes the need for a separate plant room or external condenser space
• R449A refrigerant supports compliance with current environmental regulations
• Robust galvanised steel, aluminium and plastic construction stands up to the rigours of daily commercial use
• Suitable for outdoor siting where indoor footprint is limited

The price includes a site survey, delivery, professional installation, and commissioning — all carried out by Polar's approved installation team. This is a special-to-order product and is non-returnable once ordered. Installation is available to mainland UK locations only. If siting the unit outdoors, a weather-resistant roof panel is available separately and should be considered. Internal racking and shelving are not included and must be ordered separately. The unit weighs 450kg, so floor loading and access routes should be assessed prior to ordering — this is part of what the site survey covers.

This model is well suited to mid-to-large independent restaurants, hotel kitchens, school catering operations, and food production facilities that require reliable bulk chilled storage. At 2.1 x 2.1 metres it offers a substantial footprint; sites with more modest storage demands may find a smaller configuration more appropriate, while higher-volume operations such as large-scale catering or distribution may benefit from a larger unit.

If you are weighing up whether this size is right for your site, or have questions about outdoor installation or floor preparation, the team is happy to talk it through before you commit to ordering.

The Polar U-Series integral walk-in cold room is a self-contained refrigerated storage unit supplied with professional delivery, site survey, installation, and commissioning as standard. At 2.1 metres wide by 1.5 metres deep, it provides a substantial chilled storage footprint suitable for kitchens needing to hold significant volumes of fresh produce, dairy, or prepared goods. The unit is built from galvanised steel, aluminium, and plastic panelling and is designed for indoor installation, with the option to site it outdoors where a weather-resistant roof is added.

In busy commercial kitchen environments, the forced-air refrigeration system maintains a stable internal temperature even when the surrounding ambient temperature reaches 43°C — a meaningful consideration for kitchens that experience high heat from cooking equipment or summer conditions. Recovery after frequent door openings is handled well, which is important in high-throughput operations where staff are accessing chilled stock regularly throughout service. The refrigerant charge uses R449A, a lower global warming potential alternative aligned with current industry direction.

From an operational standpoint, the design includes several details that matter in a working kitchen:

• Fully rebated lockable door closes flush with the wall panels, improving temperature retention and reducing forced-entry risk
• Smooth internal surfaces support straightforward cleaning and compliance with food hygiene standards
• Integral refrigeration unit removes the need for separate remote condensing equipment or plant room space
• Suitable for both indoor and outdoor siting, giving flexibility on placement within the site
• Supplied with site survey and professional installation, reducing commissioning risk

Because this is a special-to-order product, it is non-returnable once ordered. Before committing, it is worth confirming the delivery route and access dimensions, as the assembled unit is substantial and the installation team will need adequate clearance. The unit is available to mainland UK locations only. Racking and shelving are not included and will need to be specified separately based on how the space will be used.

This cold room suits mid-to-large independent kitchens, hotel operations, care homes, schools, and similar sites with consistent bulk chilled storage requirements. It is not aimed at very small operations where a single upright refrigerator would suffice, and for very high-volume sites — such as central production units or large event catering facilities — a larger footprint model may be worth considering.

If you are weighing up the right size or configuration for your site, or have questions about floor preparation and electrical supply requirements ahead of installation, our team is happy to talk it through with you before you place an order.

The Polar U-Series walk-in cold room is a fully integral, standalone chilled storage unit designed for commercial kitchen environments. Unlike modular systems that rely on remote condensers or external ducting, the refrigeration components are entirely self-contained within the structure, which simplifies siting and reduces installation complexity. The unit is finished in Van Dyke Brown and is suitable for both indoor and outdoor installation, subject to site conditions.

In service, the unit is built to maintain consistent chilled temperatures even when ambient conditions are demanding — the refrigeration system is rated to operate in ambient temperatures up to 43°C, which makes it a practical choice for hot kitchens or locations where heat builds up during service. The forced-air cooling system supports even temperature distribution throughout the cabinet, helping to protect stock quality during heavy access periods. The 80mm insulated wall panels use a dovetail joining system that contributes to thermal efficiency and structural rigidity over time.

From an operational standpoint, this unit offers a number of practical advantages worth noting:

• Self-closing, flush-fitting door improves cold retention during busy service periods
• Integral design eliminates the need for remote condenser pipework or separate plant rooms
• 80mm panel insulation supports energy efficiency and stable internal temperatures
• Suitable for outdoor siting, with optional weather-resistant roof for exposed locations
• Finished in Van Dyke Brown, offering a less utilitarian appearance where that matters

Installation is included in the price and covers site survey, delivery, and professional set-up by a qualified engineer. The unit is available to mainland UK locations only. At 375kg, this is a substantial structure and access routes, floor loading, and ground conditions will all need to be considered ahead of installation. The unit requires a single-phase power supply — your installer will confirm the exact requirements during the site survey. If the unit is to be sited outdoors, a weather-resistant roof panel is available separately and is worth factoring into planning. Racking and shelving are not included and are sold separately.

This cold room suits restaurants, hotel kitchens, catering operations, and food production units that need a reliable, high-capacity chilled storage solution without the complexity of a remotely condensed system. The 4,483-litre gross capacity makes it well suited to sites handling significant daily stock volume. For higher-volume or multi-temperature operations, larger or more specialised configurations may be more appropriate — and for smaller operations with more modest storage demands, a reduced footprint model may be a better fit.

Choosing the right walk-in cold room involves more than matching floor dimensions — ambient conditions, access frequency, and electrical supply all affect how well the unit will perform on your site. If you'd like to talk through whether this model is the right match for your kitchen, our team is happy to help before you commit.

The Polar U-Series walk-in cold room is a fully integral chilled storage unit — meaning the refrigeration system is entirely self-contained within the structure itself. There is no requirement for remote condensing units, external plant rooms, or refrigerant pipework runs to a separate location. Everything needed to operate is built in, which significantly simplifies installation and reduces the number of trades and coordination points involved in getting the room commissioned.

In a busy commercial kitchen, a walk-in cold room of this footprint is typically used as primary bulk chilled storage — handling deliveries, holding prepped ingredients, and supporting continuous service throughout the day. The forced-air cooling system is designed to maintain a stable temperature even in warm ambient conditions, which is an important consideration in kitchens that run hot. The dovetail panel joining system and fully rebated lockable door help maintain thermal integrity and reduce temperature fluctuation when staff are moving in and out frequently during service.

Key operational advantages of this unit include:

• Integral refrigeration — no remote condenser or ducting required on site
• Lockable rebated door helps retain cold and supports stock security
• Moisture is actively drawn away, helping to maintain product quality
• Suitable for ambient kitchen environments up to 43°C
• Uses R449A refrigerant, a lower global warming potential alternative

This is a special-to-order product, supplied in Olive Green and built to the dimensions specified. The price includes a site survey, delivery, professional installation, and commissioning for mainland UK locations. Racking and shelving are not included and will need to be specified separately. If the unit is to be installed outdoors or in a partially exposed location, a weatherproof roof section will be required and is available as a separate item. Given the unit's weight, access routes and floor loading should be considered as part of the site survey conversation.

This size of cold room is well suited to mid-scale restaurants, hotel kitchens, school catering facilities, and similar operations where consistent bulk chilled storage is needed and a self-contained installation is preferable to a remotely refrigerated system. For very high-volume operations — such as large production kitchens or central distribution sites — a larger capacity unit may be worth considering. Equally, for smaller operations with tighter floor space, a more compact walk-in option may be a better fit.

If you are unsure whether this configuration suits your site layout, service volume, or installation conditions, the team is happy to talk it through before you commit to an order.