Convotherm maxx pro easyTouch 10.10 Table-top product image

Convotherm

Convotherm Maxx Pro easyTouch 10.10 Table-top Combi Oven

SKU: maxxproeT10.10 ES

£7,883.00(£9,459.60 inc VAT)

Model: Injection/Spritzer
Power: Electric
Get a quote

Request a callback

Leave your details and we will call you back about Convotherm Maxx Pro easyTouch 10.10 Table-top Combi Oven.

Delivery Information

Price Match

  • In the event of equipment failure any parts needed will be provided 2
  • In the event of equipment failure an engineer will be sent for an onsite repair 2
  • Natural Gas - Equipment must be installed by a registered commercial Gas Safe engineer
  • Equipment can be connected to a single phase power supply – must be installed by a competent person
  • Equipment can be connected to a three phase power supply – must be installed by a competent person
  • Equipment that should be connected to a suitably rated outlet - must be installed by a competent person
  • Item weighs over 100kg and will need care and planning to get into position kg

The Convotherm Maxx Pro easyTouch 10.10 is a table-top combination oven that operates across convection, steam, and combination cooking modes. It accommodates ten full-size 1/1 GN pans and is available in electric (three-phase) or gas configurations. Steam generation is either direct injection or internal boiler depending on the specification ordered — a distinction that has real practical consequences and is worth thinking through before purchase. The 10-inch colour touchscreen gives access to both manual cooking and stored programme modes.

In a working kitchen, this is an oven built for structured, volume-led service. The ACS+ closed cooking system maintains consistent internal conditions throughout a cook cycle, which helps with load evenness when you are pushing consecutive fills during a busy service. Recovery between loads is a genuine concern with any combi oven, and the Maxx Pro handles sustained throughput without the temperature lag that disrupts pace and consistency. It performs reliably across restaurant, hotel, and contract catering environments running through covers at a steady rate.

Beyond the core cooking modes, the easyTouch interface gives chefs precise control over specific applications:

  • Crisp&Tasty — five moisture-removal levels for finishing and crisping
  • BakePro — five settings tailored to traditional baking requirements
  • HumidityPro — fine humidity control for delicate or moisture-sensitive produce
  • Variable fan speed — five settings to manage airflow across different food types
  • ConvoClean+ — automated cleaning in eco, express, and regular cycles

The front USB port is housed behind a self-closing, water-resistant cover — a considered detail in a wet kitchen environment. Programmes can be stored, transferred, and updated via USB, which suits operators standardising menus across more than one site. An Ethernet interface is included for network connectivity where that is relevant to your operation.

As a table-top model, this oven requires a suitable stand or solid preparation surface and adequate clearance above and to the sides for ventilation. It is worth confirming that your kitchen's gas or electrical supply matches the specification you are ordering before the order is placed. If you are considering the boiler-steam version, water quality and the potential need for a softener are worth discussing in advance. Installation should be carried out by a qualified engineer with experience in commercial cooking equipment.

This oven is well suited to restaurants, pub kitchens, hotel operations, and contract catering sites running structured menus at a consistent pace. It is a practical choice where bench space is limited and a floor-standing unit is not warranted. For higher-volume operations producing at greater scale, a larger-capacity model is worth considering. Equally, if your throughput is lighter, a smaller alternative may reduce running costs without sacrificing cooking capability.

If you are weighing up gas against electric, or trying to decide between boiler and injection steam based on your existing infrastructure, it is worth having a conversation before you commit — we are happy to help you work through the options.

Frequently asked questions

What is the practical difference between the boiler and injection steam versions?

The boiler model generates steam internally, which tends to give more precise humidity control and suits applications such as delicate baking or moisture-sensitive produce. The direct injection model introduces water directly into the chamber and is generally simpler to maintain, though performance in humidity-critical applications can differ. If water quality in your kitchen is poor, the boiler version may also require a water softener — worth factoring into your installation planning before you order.

Is this oven suitable for a kitchen that runs two or three sittings a day?

Yes, the Maxx Pro 10.10 is well suited to kitchens running structured, multi-sitting service at a consistent pace. Its recovery characteristics support consecutive loads without significant temperature lag, and the programme storage means cooking can be handed off reliably between shifts. For operations with significantly higher throughput or larger batch volumes, it would be worth discussing whether a higher-capacity model is a better fit.

What do I need to arrange before installation?

You will need a suitable stand or solid surface to mount the oven on, along with confirmed gas or three-phase electrical supply matching the specification you have ordered. Adequate ventilation clearance above and to the sides is required, and you should consider whether a canopy or extraction hood is needed depending on your kitchen's ventilation setup. Installation must be carried out by a qualified engineer experienced with commercial cooking equipment — we can advise on what to have in place before the engineer arrives.
Convotherm Maxx Pro easyTouch 10.10 Table-top Combi Oven

£7,883.00(£9,459.60 inc VAT)

£7,883.00(£9,459.60 inc VAT)

Options
Model: Injection/Spritzer
  • Injection/Spritzer
  • Boiler
Power: Electric
  • Electric
  • Gas

The Convotherm Maxx Pro easyTouch 10.10 is a table-top combination oven that operates across convection, steam, and combination cooking modes. It accommodates ten full-size 1/1 GN pans and is available in electric (three-phase) or gas configurations. Steam generation is either direct injection or internal boiler depending on the specification ordered — a distinction that has real practical consequences and is worth thinking through before purchase. The 10-inch colour touchscreen gives access to both manual cooking and stored programme modes.

In a working kitchen, this is an oven built for structured, volume-led service. The ACS+ closed cooking system maintains consistent internal conditions throughout a cook cycle, which helps with load evenness when you are pushing consecutive fills during a busy service. Recovery between loads is a genuine concern with any combi oven, and the Maxx Pro handles sustained throughput without the temperature lag that disrupts pace and consistency. It performs reliably across restaurant, hotel, and contract catering environments running through covers at a steady rate.

Beyond the core cooking modes, the easyTouch interface gives chefs precise control over specific applications:

  • Crisp&Tasty — five moisture-removal levels for finishing and crisping
  • BakePro — five settings tailored to traditional baking requirements
  • HumidityPro — fine humidity control for delicate or moisture-sensitive produce
  • Variable fan speed — five settings to manage airflow across different food types
  • ConvoClean+ — automated cleaning in eco, express, and regular cycles

The front USB port is housed behind a self-closing, water-resistant cover — a considered detail in a wet kitchen environment. Programmes can be stored, transferred, and updated via USB, which suits operators standardising menus across more than one site. An Ethernet interface is included for network connectivity where that is relevant to your operation.

As a table-top model, this oven requires a suitable stand or solid preparation surface and adequate clearance above and to the sides for ventilation. It is worth confirming that your kitchen's gas or electrical supply matches the specification you are ordering before the order is placed. If you are considering the boiler-steam version, water quality and the potential need for a softener are worth discussing in advance. Installation should be carried out by a qualified engineer with experience in commercial cooking equipment.

This oven is well suited to restaurants, pub kitchens, hotel operations, and contract catering sites running structured menus at a consistent pace. It is a practical choice where bench space is limited and a floor-standing unit is not warranted. For higher-volume operations producing at greater scale, a larger-capacity model is worth considering. Equally, if your throughput is lighter, a smaller alternative may reduce running costs without sacrificing cooking capability.

If you are weighing up gas against electric, or trying to decide between boiler and injection steam based on your existing infrastructure, it is worth having a conversation before you commit — we are happy to help you work through the options.