Coffee, Espresso and Latte Spoons

The Churchill Tide Vintage latte spoons are part of a cutlery range designed specifically for hospitality use, combining a tactile stonewashed finish with the durability expected of 18/10 stainless steel. The embossed detailing gives each piece a distinctive character that pairs well with artisan-style ceramic tableware, making these a practical choice for cafés, coffee houses, and restaurants where table presentation matters alongside function.

In day-to-day service, 18/10 stainless steel holds up well to repeated commercial dishwashing without losing its finish or developing surface corrosion over time. The Tide Vintage range was developed by Churchill's in-house UK design team with hospitality environments in mind, and each piece is tested to BS-EN ISO 8442-2, covering food contact safety, corrosion resistance, and material hardness. That testing standard is worth noting for operators who need to demonstrate compliance as part of their food safety documentation.

• Stonewashed finish adds character while remaining practical for daily service
• 18/10 stainless steel resists corrosion through repeated dishwasher cycles
• Tested to BS-EN ISO 8442-2 for food contact and corrosion compliance
• Designed to complement Churchill's ceramic tableware ranges
• Pack of 12 provides a practical starting quantity for most operators

As with all decorative-finish cutlery, it is worth checking compatibility with your dishwasher chemistry — very aggressive detergents or high-salt rinse aids can dull stonewashed finishes over time. Packs of 12 suit smaller operations or those looking to supplement an existing cover set; higher-volume sites may want to consider ordering in larger quantities from the outset.

If you're building a full table setting around the Tide Vintage range or want to confirm it sits well with your existing Churchill tableware, we're happy to help — just get in touch with the team.

The Churchill Tide Vintage demitasse spoon is a compact coffee spoon designed specifically for hospitality service. Part of Churchill's own Tide Vintage collection, it features an embossed pattern with a stonewashed, mirrored finish — giving it a characterful, tactile quality that sits well alongside ceramic tableware on a café or restaurant cover.

Made from 18/10 stainless steel and tested to BS-EN ISO 8442-2 standards, these spoons are built to handle the repeated washing cycles of a commercial environment without dulling or corroding. The stonewashed finish helps to mask minor surface marks that naturally accumulate with regular use, which makes them a practical choice for high-turnover beverage service.

Key practical points for operators:

• 18/10 stainless steel construction resists corrosion through repeated dishwasher cycles
• Embossed stonewashed finish helps disguise everyday surface wear
• Tested to BS-EN ISO 8442-2 for food contact safety and corrosion resistance
• Sold in a pack of 12, suitable for building or topping up cover stock
• Designed in-house by Churchill's UK team specifically for hospitality environments

These spoons are well suited to cafés, hotels, and restaurants serving espresso-based drinks, after-dinner coffee, or petit fours. They pair naturally with Churchill's ceramic ranges. The pack of twelve makes them straightforward to add to an existing flatware stock, though operators setting up a full cover from scratch may want to consider ordering in larger quantities to allow for attrition over time.

If you're building out a complete table setting or matching to a specific Churchill ceramic collection, the team are happy to help you put the right pieces together.

The Churchill Linear latte spoons are part of an in-house designed cutlery range built for consistent commercial use. Produced in 18/10 stainless steel with a mirror-polished finish, they are a practical choice for cafés, coffee shops, hotels, and any operation where beverage presentation matters alongside day-to-day durability.

In a busy service environment, cutlery takes a great deal of punishment — repeated dishwasher cycles, stacking, and general handling. The 18/10 stainless steel construction resists tarnishing and corrosion well under these conditions, and the Linear range is tested to BS-EN ISO 8442-2, which covers food contact safety, corrosion resistance, and blade hardness. That gives operators confidence that the spoons will hold their finish over time rather than pitting or dulling quickly.

From a practical standpoint, the range pairs well with Churchill's ceramic crockery collections, making it straightforward to build a coordinated table setting without mixing suppliers. Key operational advantages include:

• Dishwasher safe for high-frequency, high-temperature washing cycles
• Mirror finish maintains presentation standards throughout a busy service
• 18/10 steel grade offers reliable corrosion resistance in commercial use
• Consistent piece weight and balance suited to everyday handling
• Supplied in a pack of 12, practical for stock rotation and replacement

These spoons are well suited to coffee shops, hotel lounges, brasseries, and similar operations where a neat, unfussy beverage spoon is needed in volume. For operations requiring a heavier gauge or a more formal table setting, Churchill's broader cutlery range includes alternative profiles worth considering.

If you are equipping a new site or standardising across multiple covers, we are happy to talk through what works best for your specific service style.

The Churchill Linear demitasse spoon is a compact espresso and coffee spoon designed for professional table service. Part of Churchill's in-house designed Linear cutlery range, it features a clean, straight profile with a high-mirror finish — a style that sits comfortably alongside both contemporary and traditional tableware.

Constructed from 18/10 stainless steel, these spoons are built to withstand repeated commercial dishwasher cycles without discolouration or surface degradation. The 18/10 grade offers a higher nickel content than standard catering cutlery, which contributes to better corrosion resistance and helps the finish hold up over a longer service life — a practical consideration when pieces are in constant rotation through a busy wash cycle.

Key practical points for operators:

• 18/10 stainless steel construction resists corrosion through repeated commercial dishwasher cycles
• Mirror finish maintained to BS-EN ISO 8442-2 standards for food contact and corrosion resistance
• Compact demitasse size suited to espresso cups, petits fours, and side condiment service
• Consistent sizing across the pack supports uniform table presentation
• Designed to coordinate with Churchill's ceramic crockery ranges

These spoons are a practical choice for cafés, hotel dining rooms, restaurants offering a coffee service, and any operation where presentation at the table matters. They are equally at home in a high-volume all-day dining setting as in a smaller, more considered service environment. Sites running a larger coffee or dessert operation may want to consider purchasing additional packs or a larger quantity format to maintain a working buffer.

If you're standardising your cutlery across a full table setting or matching pieces to a specific Churchill crockery collection, our team is happy to help you work through the options.

The Churchill Kintsugi demitasse spoon is a compact coffee spoon designed to sit alongside Churchill's Kintsugi ceramic range. The spoon carries a crackled, embossed surface finish that echoes the gold-repair aesthetic of the wider Kintsugi collection, making it a considered match for operators who have already invested in the tableware series.

Constructed from 18/10 stainless steel with a high-polish finish, these spoons are built to hold up through daily commercial use and repeated dishwasher cycles without discolouring or corroding. The 2.2mm gauge gives a solid feel in service without being heavy, which suits the scale of a demitasse setting well.

For front-of-house teams, a few practical points are worth bearing in mind:

• Dishwasher safe and suitable for high-frequency warewashing cycles
• High-polish finish resists tarnishing and wipes clean easily
• Consistent weight and balance across the pack supports a uniform table presentation
• Designed to coordinate with the Churchill Kintsugi ceramic portfolio

These spoons are best suited to cafés, restaurants, and hotel operations already using Churchill Kintsugi tableware, where matching the cutlery to the crockery pattern is part of the cover presentation. They are sold in packs of 12, which suits most initial covers requirements, though busier sites serving high volumes of espresso and filter coffee will likely need multiple packs to maintain adequate par stock through a full service.

If you are building out a complete Kintsugi table setting or are unsure how many packs your service volume requires, the team is happy to help you work through the numbers.

These demitasse spoons from Churchill are designed to complement the Stonecast crockery range, carrying over its distinctive spinwash-inspired embossment into a flatware format. The result is a textured, tactile finish that gives the spoon a handcrafted appearance without sacrificing the practicality expected in a commercial setting.

Constructed from 18/10 stainless steel, they offer good resistance to corrosion and staining, which matters when spoons are going through a commercial dishwasher multiple times a day. The finish holds up well under frequent use and retains a presentable appearance across a busy service without requiring any special handling or storage.

In operational terms, the main practical advantages are straightforward:

• Dishwasher safe for rapid turnaround between services
• 18/10 stainless steel resists staining and corrosion over time
• Consistent embossed finish complements Stonecast crockery on the table
• Supplied in a pack of 12, suitable for initial stock or topping up existing covers

These spoons are well suited to cafés, hotel dining rooms, restaurants, and any hospitality setting already using Churchill Stonecast ceramics where a coordinated table presentation matters. They are a considered choice for coffee service, petit fours, or any occasion calling for a demitasse-sized spoon with a degree of visual character. For high-volume operations needing larger quantities, it is worth discussing pack sizes and availability with the team before ordering.

If you are building or refreshing a full table setting around the Stonecast range and want to talk through quantities or coordinating pieces, we are happy to help.

The Churchill Evolve demitasse spoon is a compact, polished coffee spoon designed specifically for hospitality use. Part of Churchill's own Evolve cutlery range — developed in-house by their UK design team — it follows a clean, angular silhouette that sits comfortably alongside modern ceramic tableware without drawing attention away from the overall table setting.

Manufactured from 18/10 stainless steel with a high-polish finish, these spoons are built to withstand the daily rigours of commercial service. The 18/10 grade offers reliable resistance to corrosion and staining, which matters when spoons are cycling through a commercial dishwasher multiple times a day across a long service period. They hold their finish well under regular use and feel appropriately substantial for a demitasse piece — present enough to feel considered, without being disproportionate to a small espresso or coffee cup.

Practical advantages for operators include:

• 18/10 stainless steel construction resists staining and corrosion over time
• High-polish finish remains presentable through repeated dishwasher cycles
• Balanced weight suits demitasse and espresso cup formats
• Consistent angular profile coordinates with Churchill ceramic ranges
• Pack of 12 supports practical stock management for café and restaurant covers

These spoons are well suited to cafés, hotel breakfast operations, restaurant dessert and coffee courses, and any venue where Churchill ceramics are already in use. The 12-pack format works sensibly for smaller operations or as a top-up purchase; higher-volume venues running large coffee covers may want to consider ordering in greater quantity to account for breakage and loss over time.

If you're building out a full table setting or want to confirm compatibility with a specific Churchill ceramic collection, the team is happy to help you put the right pieces together.

The Amefa Sierra espresso spoon is a compact piece of tableware finished with a hand-hammered texture across the bowl and handle. The teardrop-shaped handle has soft, rounded lines that sit comfortably between the fingers, and the hammered detailing gives each spoon a subtle visual character without making the design feel busy or overdone. The range is made from 18/10 stainless steel at a 3.0mm gauge, which gives it a solid, well-balanced feel rather than the lightweight, flimsy quality that can undermine the perception of a coffee serve.

In a café or restaurant setting, espresso spoons take a great deal of daily handling — collected, washed, restacked, and placed repeatedly through a service. The gauge and steel grade here are practical choices for that kind of consistent throughput. The hammered finish also tends to hold its appearance well over time compared with a plain mirror polish, which can show fine scratching more readily with repeated commercial washing.

• 18/10 stainless steel construction holds up to regular commercial dishwasher cycles
• Hammered finish adds visual interest to a coffee cover without requiring elaborate presentation
• 3.0mm gauge provides a reassuring weight appropriate for an espresso serve
• Teardrop handle shape is comfortable in hand for guests and easy to stack in service
• Pack of 12 allows practical stock rotation across a section or bar

These spoons are well suited to independent cafés, hotel breakfast and coffee operations, and restaurant dessert or coffee covers where a contemporary tabletop aesthetic matters. For venues running very high-volume coffee service across multiple stations, buying in larger quantities is worth considering to maintain consistent par levels through washing cycles.

If you're building out a cutlery range or matching pieces across a cover, we're happy to talk through what works together — feel free to get in touch with the team.

The Amefa Sierra latte spoon is a flatware piece designed for venues that want a considered table setting without an overstated look. The hammered finish on the handle gives the spoon a degree of visual texture and individuality that plain polished cutlery lacks, while the teardrop-shaped handle keeps the overall feel balanced and professional. These are straightforward, well-made spoons — not decorative novelties.

Constructed from 18/10 stainless steel with a 3.0mm gauge, the Sierra range is built to hold up under the repeated handling, washing, and stacking that comes with busy café and restaurant service. The weight and balance feel appropriate for a latte or specialty coffee setting, where the spoon is in the customer's hand as much as it is on the saucer.

The hammered detailing also has a practical side benefit in hospitality use: minor surface marks and light scratches are far less visible on a textured finish than on a mirror-polished spoon, which helps the cutlery maintain a presentable appearance across a longer service life.

Supplied in a pack of 12, the Sierra latte spoon is a practical choice for cafés, coffee shops, hotel lounges, and restaurants serving a specialty coffee menu. It works well as part of a coordinated table setting or as a standalone upgrade to an existing flatware mix where only the hot drinks cover needs refreshing.

If you are equipping a larger operation or want to discuss coordinating the Sierra range across other flatware pieces, the team is happy to help you work through the quantities and options.

The Amefa Drift espresso spoon is a compact, mirror-polished spoon designed for serving espresso, macchiato, and similar small coffee drinks. Part of Amefa's Drift flatware range, it follows a classic teardrop profile that sits comfortably alongside both contemporary and traditional tableware styles. Each spoon is produced from 18/10 stainless steel, which offers reliable resistance to corrosion and staining — an important practical consideration in any busy beverage service where spoons cycle repeatedly through commercial dishwashers.

In day-to-day service, 18/10 stainless steel holds up well under heavy use. The mirror finish remains presentable through repeated machine washing without the rapid dulling or pitting that lower-grade alloys can show over time. For coffee service in particular, where the same pieces may go through dozens of cycles a day, that durability matters more than it might first appear.

• 18/10 stainless steel construction for corrosion and stain resistance
• Mirror-polished finish suits formal and informal table settings
• Consistent teardrop profile for easy stacking and storage
• Supplied in a pack of 12, practical for topping up existing stock
• Dishwasher safe for high-frequency commercial use

These spoons are well suited to cafés, restaurants, hotels, and contract catering operations running espresso-based beverages as part of their service. They work equally well at a bar station or as part of a formal place setting. The pack of 12 makes them a sensible option for filling gaps in existing stock rather than committing to a full flatware overhaul. If you are equipping a larger operation from scratch or need to match an existing range, it is worth getting in touch to make sure the Drift pattern fits with what you already have in service.

The Amefa Phoenix espresso spoon is a straightforward, well-made piece of flatware suited to cafés, restaurants, and any operation serving espresso-based drinks. Constructed from 18/0 stainless steel with a 4.0mm gauge, it carries a solid feel in the hand without being heavy, and the brushed finish gives it a clean, understated appearance that works comfortably across a range of table settings — from casual dining to smarter covers.

In day-to-day service, the heavier gauge makes a noticeable difference. Thinner espresso spoons have a tendency to feel lightweight and insubstantial to guests, and they can show wear more quickly under repeated commercial dishwashing. The Phoenix holds up well in that environment, maintaining its finish and form through regular machine washing without the need for special handling.

A few practical points worth noting:

• Made with a minimum of 80% recycled stainless steel content
• Brushed finish is more forgiving of minor surface marks than a mirror polish
• Dishwasher safe for straightforward end-of-service cleaning
• Supplied in a pack of 12, which suits initial set-up or topping up existing stock

18/0 stainless steel contains no nickel, which gives it good corrosion resistance in most situations, though it is worth noting that in very high-chloride dishwasher environments, 18/10 steel generally offers greater long-term resilience. For high-volume operations running several hundred covers a day and cycling cutlery continuously, it is worth considering whether a higher-specification grade would better suit the workload.

If you are fitting out a new café or restaurant and want to talk through cutlery specifications and quantities before committing, we are happy to help.

The Amefa Carlton espresso spoon is a compact, mirror-polished piece from a range designed for consistent commercial use. Made from 18/10 stainless steel with a distinctive tubular handle, the Carlton has a clean, contemporary profile that sits comfortably across a range of service styles — from a busy café counter to a more formal table setting.

In day-to-day hospitality use, the main requirement of an espresso spoon is simple: it needs to hold up through repeated dishwasher cycles without losing its finish or developing pitting. The Carlton is dishwasher safe and the 18/10 stainless construction offers reasonable corrosion resistance under regular commercial washing conditions.

• Mirror-polished finish suits both casual and formal service settings
• Tubular handle provides a balanced feel without excessive weight
• Dishwasher safe — suitable for high-turnover service
• 18/10 stainless steel resists tarnishing and everyday corrosion
• Supplied in a pack of 12, practical for topping up existing covers

Supplied as a pack of 12, the Carlton is a practical choice for operators who need to maintain or supplement existing cover counts without committing to a large bulk order. For higher-volume sites or where more substantial cutlery weight is a priority, heavier patterns within the range may be worth considering.

If you're unsure whether the Carlton fits your current table setting or you're looking to match it with other pieces in a wider scheme, we're happy to help you work through the options.

The Pintinox Baguette Moka Spoon is a compact demitasse spoon designed for serving alongside espresso, Turkish coffee, or similar short coffee drinks. It carries the classic Baguette pattern — a clean, ribbed handle profile that has been a reliable choice in hospitality settings for many years — finished here with a stonewashed treatment that gives each piece a subtly textured, vintage appearance rather than a conventional high-gloss shine.

The stonewashed finish serves a practical purpose beyond aesthetics. It tends to show light surface marks and water spots less readily than a mirror-polished spoon, which can be a genuine advantage in busy café or restaurant environments where cutlery is turned around quickly between covers. The 18/10 stainless steel construction provides the corrosion resistance and durability expected of professional-grade flatware under repeated commercial dishwashing.

Supplied in packs of twelve, the quantity suits table restocking, tray setups, or building initial stock for a new coffee service. For operators running high-volume coffee covers, it is worth considering whether a larger quantity or a complementary range of teaspoons and dessert spoons would suit the overall table setting.

If you are matching this spoon to an existing Baguette pattern or selecting cutlery for a new concept, the team is happy to advise on quantities and how the stonewashed finish sits alongside other tableware choices.

The Churchill Tanner latte spoon is a straightforward, well-made piece of flatware from Churchill's Tanner range. Produced in 18/10 stainless steel with a high-polish finish, it is designed to complement modern café and restaurant table settings where presentation alongside hot drinks matters.

The teardrop handle gives the spoon a solid feel in the hand without being overly heavy, which makes it comfortable for customers to use and practical for service staff to handle at pace. The high-polish finish resists staining and holds up well through repeated commercial dishwasher cycles, which is a basic requirement for any front-of-house cutlery in regular rotation.

Sold in packs of twelve, the Tanner latte spoon is well suited to café operations, hotel breakfast service, and any restaurant offering a coffee or dessert menu that calls for a dedicated latte spoon rather than a standard teaspoon. The 18/10 grade provides good corrosion resistance, which helps maintain appearance over time even with frequent washing.

If you are building out a full flatware range or need to match an existing table setting, it is worth confirming compatibility with the rest of your cover before ordering in volume. We are happy to help with that conversation.

The Churchill Isla Latte Spoon is a 190mm stainless steel spoon designed to complement Churchill's Isla crockery collection. The handle features an embossed texture drawn from coastal and natural forms, giving it a distinctive appearance that sets it apart from plain commercial cutlery. Supplied in packs of twelve, it is a practical quantity for table top restocking or initial specification.

In a café or restaurant environment, latte spoons take consistent daily handling — loaded into ramekins, run through commercial glasswashers, and stacked repeatedly. The Isla spoon is made from 18/10 stainless steel, which offers good resistance to corrosion and staining under regular commercial washing conditions and holds up well over time without losing its finish.

The embossed handle makes the spoon a reasonable choice where presentation is part of the offer — independently owned cafés, coastal or casual dining venues, and any operation already using the Isla crockery range will find it coordinates naturally. It works equally well as a standalone piece where operators want something with a bit more character than standard flatware.

There are no particular installation or technical considerations for cutlery of this type. It is worth confirming that your glasswasher or dishwasher cycles are suitable for 18/10 stainless steel, though most commercial machines handle this without issue. Storage and handling practices — avoiding prolonged contact with acidic foods or harsh cleaning chemicals — will help maintain the finish long term.

If you are specifying cutlery across a full table setting or want to confirm how the Isla spoon sits alongside other pieces in the range, the team is happy to help work through the options.

The Churchill Bamboo latte spoon is part of Churchill's own-designed flatware range, developed by their UK-based team. The handle carries a linear embossed detail drawn from the natural texture of bamboo, giving the piece a quiet visual character that sits comfortably alongside Churchill's ceramic tableware without competing with it.

Made from 18/10 stainless steel with a mirror-polished finish, these spoons are built for the repetitive demands of café and restaurant service. The higher nickel content in 18/10 grade steel contributes to corrosion resistance, which matters in environments where cutlery cycles through a commercial dishwasher multiple times daily. The finish holds up well under regular machine washing without dulling quickly.

Practically speaking, these spoons work well for:

• Latte, flat white, and other espresso-based drinks served in tall glasses or wide cups
• Desserts and sundaes where a longer handle is more appropriate than a teaspoon
• Café-style brunch covers where presentation consistency matters

Supplied in packs of 12, they suit operations that need to maintain par stock across a busy service without frequent restocking. For higher-volume sites running large covers or multiple outlets, ordering in greater quantity is straightforward.

These spoons are dishwasher safe and require no special handling beyond standard cutlery care. They are a sensible choice for cafés, hotel bars, and casual dining operations that want a coherent tableware aesthetic without a significant outlay per piece.

If you are building out a full table setting or want to confirm compatibility with other Churchill ranges you already use, we are happy to help you work through the options.

The Amefa Moderno latte spoon is a straightforward, well-made piece of beverage cutlery designed for everyday commercial use. Its square-profile silhouette gives it a clean, contemporary appearance that sits comfortably alongside most styles of crockery and glassware — from classic white porcelain to more contemporary tableware. It is a practical choice for cafés, coffee shops, hotel lounges, and restaurant beverage service.

In service, the Moderno holds up well against the routine demands of a busy counter or table setting. The 18/10 stainless steel construction and 2.5mm gauge give it a solid, balanced feel in the hand — noticeably more substantial than lighter-gauge alternatives, which matters when customers are handling it multiple times a day. The mirror-polished finish is straightforward to maintain and presents well even after repeated dishwasher cycles.

• Consistent square-profile design suits a wide range of tableware styles
• Dishwasher safe — reduces handling time and supports hygiene compliance
• Substantial gauge reduces the likelihood of bending or warping under regular use
• Mirror finish maintains appearance well across repeated wash cycles

Supplied in a pack of 12, which suits operators who need to top up existing covers or introduce a new beverage offering without committing to a full cutlery range overhaul. For higher-volume sites running large beverage covers, packs can be combined to reach the quantity needed. If you are unsure how many to order based on cover count and washing frequency, we are happy to help you work that out.

The Amefa Oxford latte spoon is a long-handled teardrop-design spoon from Amefa's Premier range, intended for use with tall beverage glasses — latte, iced coffee, and similar drinks. It is made from polished 18/10 stainless steel at a 3.5mm gauge, which places it firmly in the heavier-weight category for commercial cutlery. The finish is a conventional mirror polish.

In busy café and restaurant environments, cutlery at this gauge holds up well under daily dishwasher cycling without the flex or lightweight feel that can affect thinner stock. The 18/10 steel composition provides good corrosion resistance, which matters when spoons are repeatedly exposed to acidic drinks and commercial detergents. The simple teardrop bowl design is practical to clean and unlikely to trap residue.

The Oxford spoon works well in settings where the beverage offering is a genuine part of the customer experience — independent coffee shops, hotel bars, brasseries, and restaurant groups that want consistency across their table presentation. It is a mid-tier commercial spoon: more substantial than budget catering stock, without the premium cost of top-tier silverware ranges.

Sold in packs of twelve, which suits par-stock purchasing for most operations. Sites with high covers or multiple service points may find it practical to order in greater multiples to maintain circulation during peak service without running short at the pass.

If you are equipping a new site or refreshing a full cutlery range, our team is happy to talk through quantities and pattern matching across the Oxford collection.

The Amefa Oxford espresso spoon is a compact, polished piece from Amefa's Premier cutlery range. It follows a clean teardrop bowl design with a smoothly curved handle — understated enough to sit comfortably on a café counter or a restaurant table without drawing attention away from the beverage it accompanies.

Made from 18/10 stainless steel at a 3.5mm gauge, these spoons are built to hold up under the repetitive handling, stacking, and commercial dishwasher cycles that come with a busy service. The higher nickel content in 18/10 steel contributes to corrosion resistance, which matters when spoons are going through a glasswasher or dishwasher multiple times daily. The polished finish resists dulling reasonably well with normal commercial use, though any cutlery benefits from proper rinse aid dosing and timely unloading from the dishwasher.

• Consistent weight and balance suit espresso and specialty coffee service
• Polished finish presents well on saucers and dessert plates
• 18/10 steel resists corrosion through heavy daily washing cycles
• 12-pack quantity is practical for restocking without over-ordering
• Simple design integrates easily with a range of existing cutlery ranges

These spoons are best suited to cafés, coffee shops, hotel breakfast services, and restaurants offering espresso-based drinks or desserts requiring a small spoon. They sit within Amefa's Premier tier, which is a solid mid-range position — appropriate where presentation matters but budget is also a consideration. Operations with very high covers or rough handling environments may want to consider a heavier specification.

If you're unsure whether the Oxford range is the right fit alongside your existing cutlery, or if you need guidance on quantities for your service volume, the team is happy to help.

The Amefa Metropole Velvet espresso spoon is a commercially produced piece from Amefa's Metropole range, designed for use in cafés, restaurants, and any hospitality setting where espresso and small dessert courses are served. The spoon features a square bevel profile with a slender, sloping handle — a shape that reads as contemporary without being impractical at the table.

Made from 18/10 stainless steel at a 4.0mm gauge, the spoon carries a noticeable weight and balance that holds up well to the demands of regular commercial service. High-gauge cutlery of this type tends to resist bending and retain its finish better than lighter alternatives across repeated wash cycles, which matters when pieces are going through a commercial glasswasher or dishwasher multiple times a day.

• Suitable for espresso service, petits fours, and small dessert covers
• 18/10 stainless steel construction resists corrosion and staining in daily use
• 4.0mm gauge provides a reassuringly solid feel in the hand
• Polished finish holds well through regular commercial washing
• Supplied in a pack of 12, practical for topping up existing covers

Supplied in packs of 12, this format suits operations topping up an existing Metropole setting or building a new cover. For higher-volume venues or those requiring full table settings across multiple covers, larger pack quantities or complementary pieces from the Metropole range may be more practical.

If you're building or refreshing a cutlery range and want to talk through quantities or mixing pieces across a setting, we're happy to help you work it out before you order.

The Amefa Metropole latte spoon is a long-handled spoon designed for serving lattes, tall coffees, and similar hot drinks. It forms part of Amefa's Metropole cutlery range, which is built around a square bevel profile with clean, straight lines and a gently sloping handle. The overall aesthetic is contemporary and suited to modern café and restaurant table settings.

Constructed from 18/10 stainless steel at a 4.0mm gauge, these spoons have a solid, balanced feel that holds up reliably through repeated daily use and commercial dishwasher cycles. The high polish finish is durable in normal service conditions, though as with any polished steel cutlery, consistent handling and proper dishwasher loading will extend the life of the finish over time.

Practical advantages for hospitality operations include:

• 18/10 stainless steel construction resists corrosion and staining in daily service
• 4.0mm gauge gives a substantial, balanced feel that reads well to customers
• High-polish finish maintains a professional table presentation
• Long handle length suits standard latte glasses and tall drink vessels
• Supplied in a pack of 12, practical for stocking a section or supplementing existing covers

These spoons are supplied in packs of 12, which suits operators topping up existing Metropole sets or stocking a specific drinks station. They are a practical choice for cafés, hotel breakfast operations, restaurant bar areas, and any venue where hot drinks are a regular part of service.

If you are fitting out a full table setting or need guidance on matching pieces within the Metropole range, the team is happy to help you work through quantities and requirements before you order.

The Amefa Metropole coffee spoon is a compact flatware piece designed for hot beverage service in commercial settings. Part of Amefa's Metropole range, the design draws on clean geometric lines with a square bevel profile and a slender, angled handle. The result is a spoon that sits comfortably alongside contemporary tableware without overpowering it.

Constructed from 18/10 stainless steel with a 4.0mm gauge, these spoons carry a reassuring weight in the hand — something that matters at the table, where flimsier cutlery tends to undermine an otherwise well-presented cover. The high-polish finish is achieved through an extensive buffing process, which contributes to both the initial presentation and the spoon's ability to maintain its appearance through repeated commercial washing cycles.

Supplied in packs of 12, the Metropole coffee spoon is well suited to cafés, hotel breakfast and lounge service, and any restaurant offering hot beverages as part of table service. Key practical points worth noting:

• 18/10 stainless steel construction resists staining and corrosion in commercial dishwasher use
• 4.0mm gauge provides a substantial feel without excessive weight
• High-polish finish maintained through commercial warewashing with correct chemistry
• Consistent sizing supports efficient sorting and roll-up presentation
• Pack of 12 suits initial cover builds or straightforward stock replenishment

For operations running high beverage volumes, it is worth considering how many covers you are turning and whether a larger opening quantity makes more sense. If you are unsure how the Metropole range fits alongside your existing flatware, we are happy to talk it through.

The Churchill Sola Palermo demitasse spoon is a compact flatware piece designed for espresso and coffee service. It carries a distinctive ring-collar detail at the neck — a subtle design feature that gives the Palermo range its character without straying into overly ornate territory. The mirrored finish and 18/10 stainless steel construction keep it looking sharp through repeated use and high-volume machine washing.

For front-of-house teams, a well-balanced demitasse spoon matters more than it might seem. The Palermo sits comfortably in the hand and feels proportionate alongside a small cup or espresso glass — small details that contribute to a consistent, professional presentation at the table. The 18/10 steel grade holds its finish well over time, which is worth considering when you're running the same pieces through the dishwasher multiple times a day.

Supplied in packs of 12, these are practical to stock and reorder in line with operational demand. The full Palermo collection spans a wide range of flatware pieces, so coordinating across table settings is straightforward for operators who prefer a unified look. The design sits comfortably within both modern and more classically styled dining environments.

These spoons are well suited to hotels, restaurants, cafés, and any hospitality operation serving espresso-based drinks as part of their regular offer. If you're setting up a full flatware suite or expanding an existing one, it's worth having a conversation about quantities and mix — the team is happy to help you work through what you need.

The Churchill Sola Luxor demitasse spoon is a compact, finely proportioned piece designed for espresso and after-dinner coffee service. Part of the broader Luxor range, it carries a clean, understated profile that sits comfortably alongside both traditional white tableware and more contemporary table presentations. The mirrored finish gives the piece a polished appearance without veering into ornate territory.

In service, demitasse spoons are handled repeatedly throughout a shift, so durability and ease of handling matter as much as appearance. The Luxor spoon is made from 18/10 stainless steel, which offers reliable resistance to rust and the mild acids present in coffee and citrus-based desserts. It holds up well through repeated dishwasher cycles without dulling noticeably over time, which is a practical consideration in any operation running high covers.

Supplied in packs of 12, the Luxor demitasse spoon suits operations that need a dependable, presentable piece for coffee service without overcomplicating the table setting. It works particularly well in hotel dining, café-restaurant operations, and any venue where espresso or dessert courses are a regular part of service. For operations with very high turnover or more demanding tabletop requirements, it is worth considering whether a heavier-gauge alternative would better match the environment.

If you are building out a full table setting or matching across a range of Sola Luxor pieces, we are happy to talk through quantities and combinations to suit your covers and service style.

The Churchill Sola Lausanne demitasse spoon is a compact coffee spoon designed for espresso and after-dinner service. The defining feature is a textured, hammered handle finish that gives each piece a distinctive hand-crafted appearance without straying into fussy or overly ornate territory. It sits well alongside both contemporary and transitional table settings.

Made from 18/10 stainless steel, the Lausanne range is built to hold up under the repeated washing cycles that commercial covers demand. The higher chromium and nickel content in 18/10 steel gives it reliable resistance to rust and the acidic residues that accumulate in busy dishwasher environments — a practical consideration when spoons are going through the machine multiple times each service.

For front-of-house teams, the pack of 12 covers a section without overstocking, and the consistent finish across the range means the Lausanne demitasse spoon can be introduced alongside existing Sola flatware to maintain a coherent table look. Key practical points worth noting:

• Hammered handle texture adds visual interest and aids grip when handled
• 18/10 stainless steel construction for long-term dishwasher durability
• Compact demitasse size suited to espresso, macchiato, and petit four service
• Consistent finish supports uniform table presentation across covers
• Supplied in a pack of 12, practical for section-level stocking

This spoon is well suited to cafés, hotel dining rooms, restaurants with a dessert or coffee course, and any operation that prioritises table presentation alongside durability. For higher-volume operations or those fitting out a full dining room, larger pack formats or coordinating Lausanne pieces across the cutlery range may be worth considering.

If you are building a full table setting around the Lausanne range or want advice on mixing pieces across a service, the team is happy to help you work through what you need.

The Churchill Phoenix demitasse spoon is a compact coffee spoon designed for espresso and after-dinner coffee covers. Part of Churchill's Phoenix flatware range, it carries a subtly textured finish that gives the piece a contemporary character without drawing attention away from the table setting as a whole. The spoons are made from 18/10 stainless steel with a 2.5mm gauge, which gives them a solid, balanced feel in the hand rather than the lightweight quality associated with lighter-grade cutlery.

In a busy café or restaurant environment, demitasse spoons take a significant amount of daily use — handled repeatedly through service, run through commercial dishwashers, and stacked in cutlery trays between covers. The 18/10 steel grade offers good resistance to staining and corrosion over time, which helps maintain a presentable finish without requiring excessive attention between services.

• Suitable for espresso, macchiato, and after-dinner coffee covers
• 18/10 stainless steel resists staining through repeated commercial dishwashing
• 2.5mm gauge provides a substantial, balanced feel compared to lighter alternatives
• Consistent finish supports a cohesive table presentation across the range
• Supplied in a pack of 12, practical for topping up existing stock

Supplied as a pack of 12, these are a practical choice for operators topping up existing Phoenix cutlery sets or building a new cover from scratch. The demitasse spoon is a high-attrition item in most operations, so buying in multiples is sensible housekeeping.

If you're building out a full flatware specification or matching across a broader table setting, it's worth having a conversation with us — we can help confirm compatibility with other pieces in the Phoenix range and discuss quantities suited to your cover count.

The Elia Vantage ice tea and latte spoon is a long-handled flatware piece designed for use with tall glasses and cups — the format commonly used for iced teas, lattes, frappes, and similar long drinks. Manufactured from 18/10 stainless steel at a 3.0mm gauge, each spoon carries a reassuring weight that sits well in the hand without feeling unwieldy, and the highly polished finish gives the range a clean, consistent appearance on the table.

In a busy café, bar, or restaurant setting, flatware takes considerable punishment — repeated commercial dishwasher cycles, handling at pace during service, and exposure to acidic drinks and cleaning chemicals. The 18/10 grade steel used here offers good resistance to staining and corrosion, which helps the finish hold up over time without the tarnishing or pitting that can affect lower-grade alternatives. For operators serving a reasonable volume of hot and cold drinks, this level of durability is a practical consideration, not just a quality marker.

• 18/10 stainless steel construction resists staining and corrosion through heavy use
• 3.0mm gauge provides substantial feel without excess weight
• Long handle suits tall glasses and branded drink presentations
• High-polish finish maintains a consistent, presentable appearance
• Supplied in a pack of 12, suited to restocking or supplementing existing covers

There are no installation considerations for flatware of this kind. The pack of 12 is a practical quantity for topping up an existing set or equipping a smaller drinks station. For higher-volume operations or venues running multiple seatings, it is worth considering larger pack quantities to maintain adequate cover counts through service without over-reliance on mid-service dishwasher turnaround.

This spoon suits cafés, hotel bars, restaurant beverage services, and any venue where hot or cold long-drink presentation is part of the offer. If you are fitting out a larger venue or want guidance on matching this to other pieces within the Vantage range, our team is happy to help you work through the quantities and mix that make sense for your operation.