Soup Spoons

The WNK Majestic soup spoon is a mid-to-upper range piece of hospitality cutlery, made from 18/10 stainless steel with a 4mm gauge. The 18/10 grade indicates a higher nickel content than standard catering cutlery, which contributes to better corrosion resistance and a finish that holds up well through repeated commercial dishwasher cycles. The handle carries a subtle linear embossed pattern, giving the spoon a more considered appearance than plain bistro-grade cutlery without veering into ornate territory.

In practice, this type of cutlery is well suited to environments where presentation matters but the volume of covers means pieces need to withstand constant handling, stacking, and high-temperature wash cycles without losing their finish or developing surface spotting. The heavier gauge helps with balance in the hand, which is a small but noticeable factor in customer perception at table.

• 18/10 stainless steel construction resists staining and corrosion through heavy wash cycles
• 4mm gauge provides solid balance and a quality feel in the hand
• Embossed linear handle pattern adds visual detail without being high-maintenance to clean
• Dishwasher safe for standard commercial warewasher use
• Supplied in a pack of 12, suited to building or topping up cover sets

It is worth considering how this spoon sits within your existing cutlery range. If you are replacing pieces or building a new set, consistency of pattern and finish across the table is worth checking before ordering in volume. This spoon is positioned in the mid-range of the Majestic pattern; if your operation requires a heavier-weight piece for a more formal setting, there may be a more substantial option worth considering.

If you are unsure whether this pattern sits in the right tier for your covers or need guidance on quantities for a full setup, we are happy to talk it through.

The Arcoroc Vesca soup spoon is part of a mid-weight cutlery range designed for everyday table service in commercial dining environments. The profile is clean and unfussy — gently curved with a balanced feel in the hand — which suits it equally well to casual dining, pub restaurants, and more formal table settings without looking out of place in either.

Made from 18/10 stainless steel, the Vesca range offers a reasonable combination of corrosion resistance and surface hardness. The 18/10 grade holds its appearance well through repeated commercial dishwasher cycles, which matters in operations where cutlery is turned around multiple times during a service. It is a practical, proven material choice for this type of mid-range commercial cutlery.

Supplied in a pack of 12, the format works well as a top-up purchase or as part of an initial stock build for smaller operations. Key practical points worth noting:

• Fully dishwasher safe — suitable for high-frequency commercial wash cycles
• 18/10 stainless steel construction offers good corrosion resistance over time
• Clean, neutral design sits comfortably across a range of table settings
• Consistent sizing supports neat presentation on laid covers

For higher-volume sites needing to cover larger covers consistently, it is worth considering the pack quantity alongside your usual cover count and wash cycle frequency to ensure adequate stock rotation without running short during service.

If you are building out a full cutlery range or are unsure about quantities, the team is happy to talk through what typically works for your style of operation.

The Olympia Clifton range is a polished 18/0 stainless steel cutlery collection with a clean, contemporary profile that sits comfortably across a wide range of dining environments. These soup spoons are sold in packs of twelve, making it straightforward to stock up or top up existing covers.

18/0 stainless steel is the standard specification for commercial cutlery in volume foodservice — it offers reasonable durability and holds its finish well through regular commercial dishwasher cycles, though it lacks the additional corrosion resistance of 18/10 grades. For most cafés, canteens, pubs, and casual dining operations, 18/0 is a practical and cost-effective choice.

The Clifton design avoids anything overly decorative, which tends to work in its favour in busy service settings — it is easy to sort, straightforward to polish, and unlikely to look out of place as the range grows or is supplemented over time.

This pattern is worth considering for operators running mid-range covers who want a consistent, presentable look without the premium associated with 18/10 or silver-plated ranges. If your operation involves more aggressive dishwashing chemistry or high-volume, high-frequency cycling, it is worth discussing whether a higher-grade steel would better suit your throughput.

If you are building out a full cutlery complement or matching across a range of covers, feel free to get in touch — we can help you work out quantities and ensure the Clifton range fits your service requirements.

The Churchill Tide Vintage soup spoon is a pattern designed specifically for the hospitality environment, combining a tactile embossed surface with a stonewashed finish that gives each piece a subtly aged, characterful appearance. Supplied in a pack of twelve, these spoons are made from 18/10 stainless steel and tested to BS-EN ISO 8442-2 standards, covering food contact safety, corrosion resistance, and material durability. The pattern was developed in-house by Churchill's UK design team with serviceability as well as aesthetics in mind.

In practice, the Tide Vintage finish tends to work well in settings where operators want to move away from conventional high-polish cutlery without sacrificing durability. The stonewashed surface is reasonably forgiving of the minor surface marking that comes with regular commercial dishwasher cycles, which makes it a practical choice for venues running high table-turn covers. The 18/10 grade stainless steel provides good corrosion resistance under frequent washing conditions.

The pattern suits tableware-led dining environments — independent restaurants, boutique hotels, gastropubs, and similar settings where the table presentation reflects the style of the food offer. It pairs particularly well with Churchill's own ceramic ranges, though it sits comfortably alongside most artisan or textured tableware. Operators looking for a more pared-back, contemporary finish may find other patterns in the Churchill range a better fit, while those running higher volumes may want to consider pack sizes accordingly.

If you're building out a full place setting or matching across multiple cutlery patterns, the team is happy to talk through what works well together before you commit to quantities.

The Churchill Linear soup spoon is part of an in-house designed cutlery range built for commercial table service. The pieces follow a clean, unfussy silhouette with a mirror-polished finish — a style that works well alongside both contemporary and traditional tableware. The range is manufactured to BS-EN ISO 8442-2, the relevant standard for cutlery covering food contact safety, corrosion resistance, and material hardness.

In practice, 18/10 stainless steel holds up well in high-throughput service environments. The higher nickel content relative to 18/0 steel gives it better resistance to the staining and surface degradation that repeated commercial dishwasher cycles can cause over time. For operations running multiple sittings per service, that durability translates to a longer usable life per piece and lower ongoing replacement costs.

A few practical points worth noting:

• Mirror finish shows water marks more readily — a rinse aid programme and correct dishwasher loading helps
• Sold in packs of 12, which suits initial stock-builds or topping up existing covers
• The Linear profile is designed to sit alongside Churchill's ceramic crockery collections, so it integrates naturally if the crockery is already in use on site
• Dishwasher safe at standard commercial cycle temperatures

This pattern suits restaurants, hotels, and contract catering operations looking for a reliable, mid-range cutlery option that presents well without requiring careful handling by front-of-house staff. For operations with very high cover counts or where cutlery loss and replacement is a significant concern, it is worth considering whether a heavier gauge option or a larger pack format would be more practical.

If you are specifying cutlery across a new opening or matching to an existing Churchill crockery range, we are happy to talk through quantities, patterns, and pack sizes before you order.

The Churchill Kintsugi soup spoons are part of Churchill's Kintsugi cutlery range, designed to sit alongside the matching ceramic collection. The spoon head and handle carry a crackled, embossed texture that references the Japanese Kintsugi aesthetic — making these a considered choice for operators who want their cutlery to complement a distinctive tableware scheme rather than simply serve as a neutral backdrop.

Constructed from 18/10 stainless steel and finished to a high polish, these spoons are built to hold up under regular commercial use. The 18/10 grade provides solid corrosion resistance, which is relevant in kitchens where cutlery passes through a commercial dishwasher multiple times daily. The finish should retain its appearance through consistent machine washing without the early dulling or spotting you sometimes see on lower-grade steel.

For front-of-house teams, the practical advantages are straightforward:

• Dishwasher safe — suitable for high-frequency commercial washing cycles
• High-polish finish supports corrosion resistance over prolonged service life
• Ergonomic form for comfortable handling during service
• Textured handle aids grip and distinguishes the range visually
• Sold in packs of 12, practical for batch replacement or initial cover builds

These spoons are best suited to restaurants, boutique hotels, or dining operations that are already using or considering Churchill's Kintsugi ceramic range. They are not a generic flatware option — the distinctive texture means they work best within the intended tableware pairing. For high-turnover casual dining where cutlery loss and damage rates are high, a plainer, lower-cost pattern may be a more practical choice.

If you are building a full cover specification around a Churchill ceramic range and want to confirm the right cutlery pairing, we are happy to help work through the options.

The Churchill Stonecast soup spoon is designed to complement Churchill's well-established Stonecast crockery range. The spoon carries the collection's signature spinwash embossment as a tactile, hand-crafted texture on the handle, giving it a visual consistency with the ceramics that many operators find useful when building a coherent table setting. The angular profile and textured finish are deliberate design choices rather than decorative extras — they give the spoon a sense of weight and character that reads well in both casual dining and more considered hospitality environments.

Made from 18/10 stainless steel, these spoons offer solid resistance to corrosion and staining under regular commercial use. The grade is appropriate for high-frequency service, holding its finish through repeated dishwasher cycles without the discolouration or pitting that lower-grade alloys can develop over time. For operations running multiple covers per day, that consistency in appearance matters when spoons are laid on the table dozens of times a week.

• Dishwasher safe — suitable for commercial glasswashers and dishwashers for fast turnaround between covers
• Textured handle improves grip and distinguishes the piece from standard flatware
• 18/10 stainless steel maintains appearance under heavy, repeated washing
• Sold in a pack of 12, practical for restocking or building initial cover counts

These spoons are well suited to restaurants, gastropubs, hotel dining rooms, and any operation already using Churchill Stonecast crockery. The pack size of 12 works for smaller operations or as a supplement to existing stock rather than a full setup purchase. If you are equipping a larger site or want to discuss coordinating flatware across a full Stonecast table setting, we are happy to help you work through the quantities.

The Churchill Evolve soup spoon is part of a cutlery range designed in-house by Churchill's UK team specifically for hospitality use. The range takes a clean, angular approach to form — minimal in appearance, but considered in its proportions and balance for everyday service use.

Each spoon is made from 18/10 stainless steel with a highly polished finish. The 18/10 grade is a practical choice for commercial environments: it offers reliable resistance to corrosion and staining under the repeated wash cycles and handling that come with busy service periods. The finish holds up well over time without dulling quickly, which matters when presentation is part of the cover.

In practical terms, the Evolve spoon is well balanced for comfortable handling — substantial enough to feel considered in the hand, without the weight that causes fatigue during long service shifts. The spoons are fully dishwasher safe, which keeps post-service turnaround straightforward.

• 18/10 stainless steel construction for corrosion and stain resistance
• Highly polished finish that complements formal and casual table settings
• Balanced weight suitable for extended front-of-house service
• Dishwasher safe for efficient post-service cleaning
• Designed to pair with Churchill ceramic tableware collections

Sold in packs of 12, the Evolve soup spoon is well suited to restaurants, hotel dining, contract catering operations, and similar hospitality settings where a consistent, refined table presentation is expected. For operations running multiple covers or higher attrition, larger pack quantities are worth considering to maintain consistent stock levels.

If you're building out a full table setting or matching to an existing Churchill ceramic range, we're happy to help ensure everything works together — feel free to get in touch before placing your order.

The Amefa Sierra range brings a considered approach to cutlery design, combining a teardrop-shaped handle with a hammered surface finish that adds quiet visual interest without drawing attention away from the table setting as a whole. These round soup spoons sit within that range and are supplied in packs of twelve, which suits the reorder patterns of most food service operations.

Constructed from 18/10 stainless steel at a 3.0mm gauge, the Sierra spoon has a solid, balanced feel that holds up well under the rigours of a busy service — repeated dishwasher cycles, handling by multiple staff, and the general wear that commercial flatware is expected to absorb. The hammered finish also has a practical side: surface texture tends to mask minor scuffs and handling marks better than a high-gloss mirror finish, which can help maintain a consistent presentation across a cover without constant polishing.

The round bowl profile is appropriate for table d'hôte and à la carte soup courses alike, and the handle length is well suited to standard-depth soup plates and wide bowls. The finish sits between contemporary and classic, making it a reasonable choice for venues that want something with more character than plain polished cutlery without committing to a heavily styled pattern.

If you are building out a full place setting or need to match existing flatware on the floor, the Sierra range includes additional pieces across the standard covers. It is worth confirming compatibility before ordering in quantity.

If you would like to talk through the range or check availability across the full Sierra collection, the team is happy to help.

The Amefa Ventura soup spoon is a straightforward, well-made piece of professional cutlery in a contemporary satin finish. Constructed from 18/10 stainless steel at a 2.5mm gauge, it sits at the practical end of the Ventura range — substantial enough for consistent daily use without unnecessary weight in the hand.

In a busy hospitality setting, cutlery takes considerable punishment through service, collection, and repeated machine washing. The Ventura holds up well under that routine, resisting the surface marking and dulling that affects lighter-gauge alternatives over time. The satin finish is a sensible choice operationally — it softens the appearance of minor scuffs that would show more readily on a mirror-polished surface, helping the cutlery maintain a presentable look across its working life.

For front-of-house teams, the consistent form of the Ventura range makes it straightforward to build a matching place setting. The soup spoon pairs naturally with other pieces in the line, which is useful where uniform table presentation matters.

• Dishwasher safe and suited to high-frequency warewashing cycles
• Satin finish reduces visible wear between deep cleans
• 18/10 steel construction resists staining and corrosion
• Clean, unfussy profile works across formal and casual dining formats

Supplied in packs of 12, the Ventura soup spoon is a practical choice for restaurants, hotels, contract catering, and similar operations looking for reliable, presentable cutlery at a sensible price point. For higher-volume openings or where heavier-gauge cutlery is preferred, the Amefa range includes options better suited to that requirement.

If you are building out a full table setting or ordering cutlery across multiple covers, it is worth speaking with us — we can help you work through quantities and ensure pieces match across the range.

The Amefa Carlton soup spoon is a straightforward, well-made piece of commercial cutlery suited to a wide range of hospitality settings. Constructed from 18/10 stainless steel with a mirror-polished finish, it offers the corrosion resistance and durability expected in professional service environments. The distinctive tubular handle gives the range a clean, contemporary profile that sits comfortably in both casual and more formal dining contexts.

In day-to-day service, the Carlton holds up well under the demands of a busy operation. The 18/10 steel composition resists the tarnishing and pitting that can affect lower-grade alloys over time, and the finish remains presentable through repeated commercial dishwasher cycles. The weight and balance are appropriate for a soup course — substantial enough to feel considered, without being cumbersome for guests.

From an operational standpoint, this range offers a few practical advantages worth noting:

• Dishwasher safe and straightforward to maintain at volume
• Mirror finish hides minor surface marks between polishing rounds
• Consistent profile across the Carlton range supports a coordinated table setting
• 18/10 steel resists rust and staining in high-turnover use

Supplied in packs of 12, the Carlton soup spoon is a practical choice for restaurants, hotels, contract caterers, and event operators looking for reliable everyday cutlery without unnecessary complication. For sites with very high covers or particularly demanding dishwasher cycles, it is worth considering whether a heavier-gauge option from elsewhere in the range would better suit the volume.

If you are building out a full table setting or matching across a range, the team is happy to advise on coordinating pieces and pack quantities before you order.

The Amefa Harley soup spoon is a straightforward, well-made piece of commercial cutlery in 18/10 stainless steel with a mirror finish. The Harley range has a clean, graphic line to it — not ornate, but not plain either — which tends to sit comfortably across a range of front-of-house settings without looking out of place.

In everyday service, 18/10 stainless steel holds up well. The higher nickel content gives it better resistance to corrosion and discolouration over time compared to lower-grade alloys, which matters when cutlery is going through a commercial dishwasher multiple times a day. The mirror finish is straightforward to polish if needed and doesn't show surface marks as readily as brushed alternatives.

• 18/10 stainless steel construction for durability and corrosion resistance
• Mirror finish — presentable across casual dining and more formal settings
• Dishwasher safe for high-frequency commercial wash cycles
• Sold in packs of 12, practical for topping up existing stock
• Consistent pattern design across the Harley range for a matched table set

This spoon is well suited to cafés, pubs, staff restaurants, hotels, and mid-market dining operations looking for reliable everyday cutlery that doesn't require careful handling. It isn't a premium silversmith-weight piece, so operators running a fine dining cover may want to consider a heavier-gauge option from elsewhere in the range.

If you're building out a full table setting or unsure how many covers a pack of 12 will realistically cover in service, the team is happy to help you work through quantities.

The Amefa Jewel soup spoon is a heavy-gauge stainless steel spoon designed for front-of-house use in restaurants, hotels, and other hospitality operations where table presentation matters. The handle features a diamond-inspired textured pattern with a mirror-polished finish, giving the cutlery a considered, formal appearance without veering into ornate or fussy territory. Supplied in packs of twelve, it is a practical quantity for topping up existing stock or fitting out a section.

Made from 18/10 stainless steel at a 3.0mm gauge, these spoons carry a solid weight in the hand that reads well at the table — substantial enough to feel quality-made, without being unwieldy for guests. The mirror finish holds up well through regular commercial dishwasher cycles, though as with all polished cutlery, keeping on top of water spotting during the drying stage will help maintain appearance over time.

• Dishwasher safe for high-turnover service environments
• Textured diamond-pattern handle adds visual interest to formal covers
• Heavy-gauge construction resists bending under normal service conditions
• Mirror-polished finish presents well on both formal and contemporary table settings

This pattern suits operations looking for a step up from entry-level cutlery without committing to a premium price point. It works well across restaurant dining rooms, hotel restaurants, and event catering where a consistent, presentable cover is expected. If you are fitting out a larger operation or need guidance on quantities, the team is happy to talk it through.

The Amefa Drift medium soup spoon is a straightforward, well-made piece of table cutlery in the classic teardrop bowl profile. Produced in 18/10 stainless steel with a mirror finish, it sits comfortably within both contemporary and traditional table settings without looking out of place in either.

In day-to-day service, 18/10 stainless steel holds up well against repeated commercial dishwasher cycles. The higher nickel content in the alloy gives the finish better resistance to dulling and surface spotting over time compared with lower-grade steel, which matters when cutlery is being turned around across multiple covers each service.

Practically speaking, the Drift range offers a few qualities that operators tend to value in a working cutlery programme:

• Mirror finish maintains appearance across heavy rotation without specialist care
• Consistent weight and balance in hand, which suits most soup course presentations
• Straightforward profile makes sorting and rolling easier for front-of-house teams
• Resistant to staining and corrosion in standard commercial dishwasher conditions

There are no installation or electrical considerations here. The main practical question is pack sizing — at 12 pieces per pack, it is worth calculating cover count and anticipated breakage or loss rates before ordering, to avoid running short during a busy period.

This spoon suits restaurants, hotels, contract caterers, and event operators running a conventional table service. It is a mid-range cutlery option — appropriate where a clean, consistent presentation matters but a premium or heavily weighted pattern is not required. For very high-end or fine dining covers, a heavier or more distinctively styled range may be more appropriate.

If you are specifying cutlery across a full table setting or need guidance on pack quantities for your cover count, the team is happy to help you work through the numbers.

The Amefa Opus soup spoon is a straightforward, well-made piece of catering cutlery designed for everyday commercial service. The classic teardrop handle profile and lightly chamfered edge give it a clean, traditional appearance that sits comfortably across a range of table settings — from casual dining to more formal covers. It is the kind of pattern that does not draw attention to itself, which is generally what operators want from a workhorse cutlery range.

Constructed from 18/10 stainless steel, Opus resists the staining and pitting that can affect lower-grade cutlery in busy dishwasher cycles. The higher nickel content in 18/10 steel helps pieces retain their finish over time, which matters when a set is being turned around multiple times per service and run through commercial glasswashers or dishwashers repeatedly.

• Consistent finish holds up well to repeated commercial dishwashing
• Classic profile suits a broad range of dining formats
• 18/10 grade reduces long-term rust and staining risk
• Supplied in packs of 12, making it straightforward to build par stock
• Lightweight enough for everyday use without feeling insubstantial

Opus is a sensible choice for restaurants, hotels, staff dining, and contract catering operations looking for reliable everyday cutlery without unnecessary cost. It is not a prestige flatware range, but for high-turnover environments where durability and consistent appearance matter more than decorative detail, it performs well. If you are equipping a site with more specific styling requirements or need a heavier-gauge piece, there are alternative patterns worth considering.

If you are unsure how many pieces to order for your cover count, or whether Opus is the right fit for your service style, we are happy to talk it through.

The Churchill Sola Palermo soup spoon is part of a coordinated flatware range designed for professional hospitality use. Each piece carries a distinctive ring-shaped collar detail that gives the Palermo range its character, sitting somewhere between classical and contemporary in appearance — practical for operators who want a table setting that reads well across different dining formats.

Made from 18/10 stainless steel with a mirrored finish, these spoons are built to withstand the demands of a busy commercial operation — repeated machine washing, handling by multiple staff, and the general wear of daily service. The 18/10 grade offers a good balance of corrosion resistance and surface durability, which matters in a kitchen environment where cutlery is cycled through a dishwasher dozens of times each week.

Supplied in packs of 12, the Palermo range is straightforward to build up to the cover counts required by most dining rooms. A full selection of matching pieces is available within the range, which makes it practical to achieve a consistent tabletop presentation without mixing patterns.

• 18/10 stainless steel construction for long-term corrosion resistance
• Mirrored finish suits both modern and traditional table settings
• Collar detail adds visual interest without complicating cleaning
• Balanced weight and comfortable in the hand during service
• Pack of 12 allows straightforward volume ordering

The Palermo range is a reasonable choice for restaurants, hotels, and contract catering operations looking for a flatware pattern that is distinctive without being difficult to match over time. If you are equipping a large dining room or want to discuss building a full cover count across the range, the team is happy to help work through the quantities.

The Churchill Sola Luxor soup spoon is part of an established cutlery range designed for professional table service. The Luxor pattern takes a clean, understated approach — a mirrored finish with a slender, balanced form that sits comfortably in the hand without feeling flimsy. It is the kind of cutlery that works quietly in the background, complementing the tableware rather than competing with it.

In a service environment, consistency matters. These spoons are manufactured from 18/10 stainless steel, which gives them good resistance to rust and the acids found in soups, broths, and acidic dressings. They hold up well through repeated commercial dishwasher cycles without losing their finish, which is a practical consideration when you are turning covers regularly and cutlery is going through the wash several times a night.

The Luxor range suits a wide range of hospitality settings — from hotel restaurants and brasseries to private dining rooms and contract catering. The neutral design means it sits naturally alongside both classic white porcelain and more contemporary tableware. Supplied in a pack of 12, it is straightforward to order in the quantities needed to meet your cover count, with additional packs available to build up stock.

For operations running a large number of covers or requiring cutlery across multiple patterns, it is worth thinking through quantities carefully before ordering — our team is happy to help work out what you need.

The Churchill Sola Lausanne soup spoon is part of the Sola cutlery range, designed for hospitality and foodservice environments where presentation matters alongside durability. The defining feature is the hammered handle finish, which gives the piece a textured, hand-crafted appearance that works well in contemporary dining settings without looking out of place in more classic environments.

Constructed from 18/10 stainless steel, these spoons offer good resistance to corrosion and everyday acids found in food service — useful in environments where cutlery is cycled repeatedly through a commercial dishwasher. The 18/10 grade is a reliable choice for front-of-house cutlery that needs to hold its finish under sustained use.

Supplied in a pack of 12, the Lausanne soup spoon suits restaurants, hotels, bistros, and contract catering operations where a consistent, well-presented table setting is part of the customer experience. The hammered handle gives a point of visual interest that can complement artisan or independently styled menus, as well as more formal dining formats.

• Dishwasher safe for high-throughput cutlery cycles
• 18/10 stainless steel construction for corrosion resistance
• Hammered handle adds texture and visual appeal to table settings
• Supplied in a pack of 12 for straightforward stock management

If you are sourcing cutlery across multiple covers or need to match the Lausanne pattern across other pieces in the range, it is worth speaking with the team to confirm pack quantities and availability before placing a larger order.

The Churchill Phoenix soup spoon is part of a coordinated flatware range designed for professional table settings. Made from 18/10 stainless steel with a 3.5mm gauge, these spoons offer a balanced weight and a finish that holds up well to repeated commercial dishwashing cycles. The Phoenix pattern draws on a subtle textured design that works across a range of dining styles, from casual restaurant covers to more formal hotel dining.

In practice, 18/10 stainless steel is the standard specification for commercial cutlery expected to withstand daily machine washing without discolouring or corroding over time. The gauge is substantial enough to feel considered in the hand without being overly heavy — which tends to suit most covers well.

• Resistant to staining and corrosion under regular commercial washing
• Coordinated with other pieces in the Churchill Phoenix range
• Balanced weight suitable for a broad range of dining formats
• Supplied in a pack of 12, practical for topping up existing stock

These are supplied in packs of 12, which makes them straightforward to order in multiples aligned to your cover count. They sit comfortably alongside other Churchill Phoenix pieces if you are building or completing a matched set.

If you are unsure how many packs to order for your cover count or whether Phoenix is the right range for your table concept, we are happy to help you work that out.

The Elia Viola soup spoons are part of a contemporary flatware collection designed for professional table settings. Made from 18/10 stainless steel with a mirror polish finish, they present a clean, modern appearance that sits comfortably across a range of service styles — from casual dining through to more formal restaurant covers.

The 3.0mm gauge gives the spoon a reassuring solidity in the hand, which is a practical consideration in busy service environments where cutlery is handled repeatedly throughout a shift. Heavier-gauge pieces tend to feel more considered to guests and hold up better to the daily rigours of commercial use, including regular machine washing.

• 18/10 stainless steel construction resists corrosion and staining over time
• Mirror polish finish presents well across casual and formal table settings
• 3.0mm gauge provides a substantial, quality feel in the hand
• Dishwasher safe for straightforward service turnaround
• Supplied in a pack of 12, practical for building or topping up covers

For most operators, the key question is whether the style and weight suit their existing flatware or a new collection they are planning. The Viola range has a contemporary profile, so it works best where the overall table aesthetic leans towards clean, modern lines rather than traditional or ornate settings.

If you are fitting out a larger number of covers or building a complete flatware specification, it is worth having a conversation with us about quantities, storage, and whether the Viola collection as a whole fits the direction you are heading.

The Elia Spectro soup spoon is a professional-grade piece of flatware from Elia's Spectro range, produced in 18/10 stainless steel with a distinctive two-tone brushed and mirror finish. The 2.5mm gauge construction gives the spoon a solid, well-balanced feel that reads as quality to a guest the moment it is placed on the table.

In a busy service environment, flatware takes considerable punishment — repeated machine washing, stacking, and daily handling. The 18/10 steel used here offers good resistance to corrosion and staining, which helps the finish hold up over time with normal commercial dishwasher use. The two-tone aesthetic tends to age better than a plain mirror finish, as light surface wear is far less visible on the brushed sections.

Practically, the Spectro suits mid-to-upper casual dining, hotel restaurants, and event catering where presentation matters but operators also need pieces that survive volume service without constant replacement. The 12-piece pack format is sensible for topping up existing covers or trialling the range alongside current flatware before committing to a full set.

If your operation runs high cover counts or particularly intensive washing cycles, it is worth considering a heavier-gauge alternative from the wider range. For most restaurant and hotel dining environments, however, the Spectro sits at a practical point between durability and presentation quality.

If you are building out a full flatware specification or matching pieces across a range, the team are happy to help you work through what makes sense for your service style and cover volume.

The Elia Clara soup spoon is a polished, mirror-finish piece from Elia's Clara range, crafted in 18/10 stainless steel with a 2.5mm gauge. It has a clean, classic profile with no decorative detailing — the kind of straightforward, well-proportioned design that sits comfortably across a broad range of table settings, from relaxed bistro dining to more formal restaurant covers.

In a busy service environment, cutlery takes a great deal of handling, stacking, and repeated machine washing. The heavier gauge of the Clara spoon gives it a reassuring solidity in the hand and helps it hold its shape over time, resisting the flexing and lightweight feel that can make cheaper pieces feel unsuitable for professional use. The mirror polish maintains a bright, clean appearance under dining room lighting and responds well to commercial dishwasher cycles when standard dosing and rinse-aid levels are maintained.

A few practical points worth noting for operators:

• Fully dishwasher safe — suitable for commercial warewashing at standard temperatures
• 18/10 stainless steel offers good corrosion resistance in high-use environments
• Mirror polish gives a formal presentation without a premium price point
• Supplied in packs of 12, making it straightforward to top up covers as needed
• Classic profile suits mixed table settings and pairs well within the wider Clara range

The Clara range is a practical choice for mid-market restaurants, hotels, contract caterers, and hospitality venues looking for reliable, presentable cutlery that won't need replacing frequently. If you're setting up a full cover or need guidance on quantities relative to your service volume, we're happy to help you work through the numbers before you order.

The Elia Ribbon soup spoons are part of a coordinated flatware collection designed for professional dining environments. Made from 18/10 stainless steel in a heavy gauge, they carry a mirror-polished finish and a shaped handle with the subtle ribbon detailing that defines the range. Each pack contains twelve spoons, making them a practical purchasing unit for restaurants, hotels, and private dining operations.

In everyday service, heavy-gauge cutlery holds up better than lighter alternatives — it resists bending under repeated use, retains its finish through commercial dishwashing cycles, and feels well-balanced in the hand rather than flimsy. The Ribbon pattern occupies a middle ground between understated and decorative, which tends to work well across a range of dining styles without looking out of place.

• Heavy-gauge construction handles the demands of high-frequency commercial use
• Mirror-polished finish presents well on the table and withstands regular machine washing
• 18/10 stainless steel provides good corrosion resistance over long-term use
• Twelve-piece pack suits batch purchasing for covers-based restocking
• Part of a wider Ribbon collection, so matching pieces are available across the range

It is worth confirming that your dishwasher detergent and rinse-aid settings are appropriate for polished stainless steel — aggressive chemistry or incorrect dosing is a common cause of surface marking on mirror-finished cutlery, regardless of the brand.

The Ribbon range is well suited to restaurants, hotel dining rooms, and event caterers looking for a consistent, presentable flatware pattern. If you are equipping a larger operation or need to match an existing table setting, it is worth having a conversation with us about pack quantities and available pieces within the collection.

The Elia Aspect soup spoon is part of Elia's Aspect cutlery range, a pattern characterised by a broad, square-shouldered handle that tapers into a well-proportioned bowl. Finished in 18/10 stainless steel with a mirror polish, it presents clearly as a quality piece without being ornate or difficult to maintain.

In a service environment, cutlery takes considerably more abuse than most operators anticipate. The Aspect range is made to a generous gauge, which means the spoons hold their shape and finish through repeated commercial dishwasher cycles without the flexing or pitting that lighter-gauge cutlery is prone to. The mirror finish shows marks readily — as all polished cutlery does — but responds well to standard cutlery polishing cloths and drying procedures.

Practically, this pattern works well across a range of covers and service styles:

• Suitable for formal dining, bistros, hotel restaurants, and function catering
• Consistent weight and balance aids comfortable handling during service
• Mirror finish complements both classic and contemporary table settings
• 18/10 steel composition supports long-term resistance to staining and corrosion
• Supplied in packs of 12, practical for building or replenishing stock

As with any polished cutlery pattern, consider your polishing and storage procedures before committing to a full cover quantity. Operations with high throughput or limited polishing resource sometimes find a satin finish more practical for day-to-day maintenance.

If you're building out a full Aspect setting or want to discuss quantities for a new opening, the team is happy to help you work through what you need.

The Elia Reed soup spoon is a classically styled piece of table cutlery, finished to a high polish and produced in 18/10 stainless steel. The design is clean and unfussy, with a profile that sits comfortably in a formal or semi-formal cover without drawing attention away from the food. Sold in packs of 12, it is a practical buying unit for operators managing stock across multiple tables or covers.

Reed is made to a generous gauge, which gives it a solid feel in the hand — an important consideration for front-of-house presentation. Lightweight or flimsy cutlery tends to undermine the perception of quality at the table, and this range avoids that. The high-polish finish is consistent across the range, which helps when mixing pieces across a service or replacing items over time.

In practical terms, 18/10 stainless steel offers good corrosion resistance and holds up well through commercial dishwasher cycles. The polished finish does show water marks if items are left to air-dry, so a drying and polishing step in the clearing and reset process is worth factoring into front-of-house workflow.

This spoon suits restaurants, hotels, and dining operations running a traditional or contemporary European cover. It works well in mid-range to fine dining environments where cutlery weight and finish quality are part of the overall guest experience. For operations with very high turnover or casual dining formats, a simpler or more economical range may be more appropriate.

If you are building out a full cover or matching across an existing range, the team is happy to help you confirm compatibility and quantities before you order.

The Elia Sirocco soup spoon is part of a contemporary cutlery range produced from a single piece of 18/10 stainless steel and brought to a high mirror polish. The design is clean and slimline, with a restrained aesthetic that sits comfortably in modern dining environments without drawing attention away from the food.

In service, 18/10 stainless steel is a well-regarded choice for commercial cutlery. The higher nickel content contributes to corrosion resistance and helps the finish hold up through repeated commercial dishwasher cycles over an extended service life. The Sirocco pattern is simple enough to remain presentable as pieces age alongside one another.

From a practical standpoint, this type of cutlery suits operators who want a consistent, professional table setting without the maintenance demands of silver-plated alternatives. Key operational considerations include:

• 18/10 stainless steel construction resists staining and tarnishing in daily use
• High mirror polish maintains a smart appearance through commercial dishwashing
• Single-piece forging avoids weak joints or hollow handles that can fail under use
• Sold in a pack of 12, practical for phased purchasing or stock replenishment
• Slimline profile suits contemporary cover settings without adding bulk to place settings

This pattern is well suited to restaurants, hotel dining rooms, bistros, and café operations looking for a durable everyday soup spoon with a contemporary feel. It is a mid-range commercial pattern — operators equipping a high-end fine dining environment may wish to review heavier-gauge alternatives, while those needing large bulk quantities may benefit from discussing volume pricing.

If you are building out a full cover or matching an existing Sirocco setting, the team is happy to help confirm the right quantities or discuss the wider range.

The Steelite Finale bouillon spoon is a classically proportioned soup spoon designed for formal table settings where presentation matters. Made from 18/10 stainless steel, it carries a higher nickel content than standard grades, which contributes to its resistance to corrosion and helps it retain a bright, consistent finish through repeated commercial wash cycles.

In a busy dining environment, cutlery takes a great deal of punishment — frequent machine washing, contact with acidic broths, and high-volume handling. The Finale spoon is well suited to this kind of sustained use. The rounded bowl profile and balanced weight make it comfortable in the hand, which is a consideration worth noting for formal dining services where guest experience is a priority.

• 18/10 stainless steel construction resists corrosion over sustained commercial use
• Dishwasher safe and straightforward to keep clean in line service conditions
• Rounded bowl profile suits formal soup and bouillon service
• Supplied in a pack of 12, practical for cover counts and stock management
• Consistent finish supports cohesive table presentation across a cover

As with all cutlery, it is worth considering how the Finale range sits alongside your existing flatware pattern. Steelite produce a broader cutlery collection, so if you are building a complete place setting or need to match pieces already in service, it is worth checking compatibility before ordering in quantity.

If you are unsure how many packs suit your cover count, or whether this pattern fits your existing table setup, the team are happy to help you work it through.

The Olympia Buckingham soup spoon is a straightforward, well-finished piece of table cutlery designed for everyday use in commercial dining environments. Made from 18/0 stainless steel with a highly polished finish, it presents cleanly on the table and holds up well through repeated service, washing, and handling.

In a busy restaurant or catering setting, cutlery takes a significant amount of punishment — constant dishwasher cycles, stacking, and general handling. The Buckingham range is built to remain presentable under those conditions, with smooth rounded edges on the handle base that reduce the likelihood of catches or rough edges developing over time. The polished finish resists marking reasonably well and restores easily after washing.

• Consistent, smart appearance suitable for casual dining through to mid-range restaurant covers
• Smooth handle edges reduce wear and improve guest comfort
• High-polish finish responds well to standard commercial dishwashing
• Sold in dozens, making it straightforward to order to cover size
• 18/0 stainless steel construction suits high-turnover environments where replacement cost matters

It is worth noting that 18/0 stainless steel, while durable and cost-effective, does not carry the same corrosion resistance as 18/10 grades. For operations with particularly aggressive dishwasher chemicals or high-humidity storage, an 18/10 alternative may be worth considering. For most standard commercial kitchens and dining rooms, the Buckingham performs reliably without issue.

This spoon is well suited to restaurants, cafés, hotel dining, and contract catering operations looking for dependable everyday cutlery at a sensible price point. If you are equipping a larger site or need advice on matching pieces within the Buckingham range, the team is happy to help you work out the right quantities.