Table Forks: Churchill, Sola and Elia

The Churchill Tide Vintage table fork is a mid-weight hospitality fork finished with an embossed, stonewashed surface and a polished mirrored face. Each piece is made from 18/10 stainless steel and supplied in packs of twelve, making them a practical choice for operators looking to build or refresh a cover count with consistent, coordinated cutlery.

Churchill designed the Tide Vintage range specifically for the hospitality environment, with an emphasis on durability under repeated commercial warewashing, resistance to corrosion, and comfort in the hand during a full service. Each fork is tested to BS-EN ISO 8442-2, which covers food contact safety, corrosion resistance, and blade hardness — a useful baseline assurance for any procurement decision in a licensed or food-service environment.

The stonewashed finish is worth noting from a practical standpoint. It tends to mask minor surface marks and water spots more effectively than a plain high-polish finish, which can reduce the appearance of wear over time in high-turnover services. The embossed pattern also gives the cutlery a tactile quality that works well alongside textured or hand-finished ceramic tableware.

• Suitable for everyday cover service in restaurants, hotels, and event catering
• Holds up well to commercial dishwasher cycles when dried and stored correctly
• The stonewashed finish helps conceal minor surface blemishes between polishing
• Pairs naturally with Churchill's ceramic ranges for a coordinated table setting

If you are building a full cutlery set across multiple covers or need to match existing Churchill tableware, it is worth speaking to the team about pack quantities and coordinating pieces before placing an order.

The Churchill Linear table fork is part of Churchill's in-house designed cutlery range, produced in 18/10 stainless steel with a mirror polish finish. The Linear pattern takes a clean, unfussy approach — a straight profile that sits comfortably across a range of table settings without competing with the crockery or glassware around it.

In busy restaurant and hospitality environments, cutlery takes a sustained amount of daily punishment: repeated dishwasher cycles, stacking, sorting, and constant handling. The 18/10 stainless steel grade offers a practical balance of corrosion resistance and surface hardness, which helps the finish hold up over time rather than dulling or pitting prematurely. The Linear range is tested to BS-EN ISO 8442-2 standards, which covers food contact safety, corrosion resistance, and blade hardness — relevant assurance for operators who need to demonstrate compliance.

• Pairs well with Churchill's ceramic tableware collections for a coordinated table setting
• Dishwasher safe, supporting efficient turnaround between covers
• Mirror finish presents well across both casual dining and more formal settings
• Sold in a 12-pack, suitable for scaling purchases to cover size

Sold in packs of 12, the Linear fork is a practical choice for restaurants, hotels, contract caterers, and hospitality venues looking for dependable everyday cutlery that holds its appearance through regular service. For very high-volume operations running multiple sittings daily, it is worth considering whether a heavier-gauge pattern better suits the wear demands.

If you are building out a full table setting or are unsure which cutlery pattern best suits your crockery and service style, we are happy to help you work through the options.

The Churchill Kintsugi table fork is part of Churchill's Kintsugi cutlery collection, designed specifically to sit alongside the Kintsugi ceramic tableware range. Constructed from 18/10 stainless steel with a crackled, embossed surface texture, the fork carries a distinctive aesthetic that echoes the ceramic pieces it accompanies. The high-polish finish supports corrosion resistance and helps maintain appearance through repeated commercial use.

In a hospitality setting, coordinated tableware — ceramics and cutlery together — contributes to a consistent cover presentation. The Kintsugi fork is well suited to restaurants, hotels, and dining operations that have already committed to or are building around the Kintsugi ceramic portfolio. It is a considered choice rather than a general-purpose fork, and operators looking for a standalone workhorse cutlery range may find Churchill's other collections a more practical fit.

Practical points worth noting for front-of-house teams:

• 18/10 stainless steel construction for durability under regular service
• High-polish finish aids corrosion resistance over time
• Dishwasher safe, suitable for commercial glasswasher and dishwasher cycles
• Textured embossed handle coordinates with Kintsugi ceramic tableware
• Supplied in packs of 12, allowing straightforward stock management by cover count

If you're building or refreshing a table setting around the Kintsugi range and want guidance on quantities, pack sizes, or how the broader collection fits together, we're happy to help you work through it.

The Churchill Stonecast table fork is a companion piece to Churchill's well-regarded Stonecast crockery range, sharing the same signature spinwash-inspired aesthetic rendered as a tactile embossment on the handle. Manufactured from 18/10 stainless steel, these forks are built to the standard expected of commercial tableware — resistant to staining and corrosion, and capable of holding their appearance through repeated machine washing.

In a busy service environment, cutlery takes considerable punishment. The Stonecast fork's textured handle gives it a distinctive character without sacrificing the robustness required for daily commercial use. The finish holds well under regular dishwasher cycles, which matters when turnover between covers is tight and cutlery needs to be back on the table quickly.

This fork works particularly well where operators are already using Churchill Stonecast crockery and want a cohesive table setting that carries the same handcrafted aesthetic through to the cutlery. It suits casual fine dining, boutique hotels, and independent restaurants where the table presentation reflects the food offering.

• Dishwasher safe — suitable for commercial machine washing cycles
• Corrosion and stain resistant for long service life
• Coordinates with the broader Churchill Stonecast crockery collection
• Tactile embossed handle adds character without compromising practicality

Supplied in packs of 12, which is a practical quantity for building or supplementing a cover count. Operators fitting out a full dining room will typically need to consider multiples of this pack size alongside their expected cover number and wash cycle frequency.

If you're building a full table setting or matching to an existing Stonecast crockery order, we're happy to advise on quantities and what else sits well alongside these forks.

The Churchill Evolve table fork is part of a cutlery range designed in-house by Churchill's UK team specifically for hospitality use. The profile is clean and angular with a minimal silhouette, making it straightforward to pair with a range of tableware styles, including Churchill's own ceramic collections. Each fork is manufactured from 18/10 stainless steel with a highly polished finish, which gives reasonable resistance to corrosion and staining under the repeated washing cycles that are standard in a busy service environment.

In day-to-day use, the fork handles well — substantial enough to feel considered in the hand without adding unnecessary weight for guests. For operators, that balance also makes the pieces easier to set and clear at pace during a busy service. The dishwasher-safe construction means they can go straight through a commercial glasswasher or pass-through machine without special handling, which keeps turnaround time practical.

A few points worth bearing in mind when considering this range for your operation:

• 18/10 stainless steel offers good corrosion resistance for regular commercial dishwasher use
• Polished finish suits formal and semi-formal table settings
• Angular design complements contemporary ceramic tableware
• Sold in packs of 12 — ordering in multiples is straightforward for larger cover counts
• Dishwasher safe, with no specialist cleaning requirements

This fork is well suited to restaurants, hotels, and contract catering operations looking for a reliable mid-range cutlery option with a clean contemporary aesthetic. For venues with very high cover counts or where cutlery loss and replacement is frequent, it is worth considering whether buying in larger quantities or across a broader range of pieces makes more sense operationally.

If you are specifying cutlery across a full table setting or matching to an existing Churchill tableware range, the team is happy to talk through the options.

The Churchill Sola Palermo table fork is part of a coordinated flatware collection distinguished by a ring-shaped collar detail on the handle. The design sits between classic and contemporary, making it adaptable across a range of dining styles without feeling out of place in either direction. Forged from 18/10 stainless steel with a mirrored finish, the fork carries a balanced weight in the hand that reads as considered rather than flimsy.

In practice, 18/10 stainless steel holds up well to the demands of commercial dishwashing cycles — resisting tarnish and maintaining its finish over sustained use. For front-of-house teams, that means less time inspecting and repolishing between services, and a consistent appearance on the table throughout the day.

• Mirrored finish presents well across both formal and informal table settings
• 18/10 stainless steel construction resists corrosion and withstands frequent machine washing
• Balanced weight supports comfortable handling during service
• Supplied in a pack of 12, practical for building stock incrementally
• Part of a full Palermo range, allowing a coordinated cutlery cover

The Palermo collection is well suited to restaurants, hotel dining rooms, and hospitality venues where presentation matters but day-to-day durability is equally important. It is equally at home in a busy brasserie as it is in a more formal dining setting. If you are building a full cover or matching to existing Palermo pieces, the wider collection includes complementary items to complete the set.

If you are unsure how many covers to stock or which pieces to include in your cutlery selection, the team is happy to help you work through the quantities.

The Churchill Sola Luxor table fork is a slender, mirrored-finish piece from the Luxor range — a pattern recognised across professional dining for its clean, understated profile. Supplied in packs of twelve, these forks are intended for commercial table settings where a consistent, polished appearance matters without drawing attention away from the food or the overall cover.

In service, the Luxor fork performs reliably through high cover counts. The lightweight form sits comfortably in the hand without feeling insubstantial, and the mirrored finish holds up well through repeated commercial dishwasher cycles. Manufactured from 18/10 stainless steel, the forks carry good resistance to rust and acid exposure — relevant where cutlery is processed through high-temperature glasswashers or exposed to acidic sauces and marinades over extended periods.

Practical advantages for front-of-house teams include:

• Dishwasher-safe construction suited to high-throughput back-of-house operations
• Consistent finish across the range supports uniform table presentation
• 18/10 stainless steel resists staining and discolouration over time
• Lightweight design reduces handling fatigue during rapid table-turning
• Compatible with both classic white tableware and contemporary plating styles

The Luxor pattern suits operations where a refined but unfussy aesthetic is required — mid-to-upper casual dining, hotels, private members clubs, and event catering. It is not a heavy-gauge pattern, so for establishments where cutlery takes significant physical wear or is regularly mishandled, a heavier-weight range may be worth considering.

If you are equipping a new dining room or standardising across a site, our team is happy to discuss pack quantities, pattern matching across the Sola range, and suitability for your cover style.

The Churchill Sola Lausanne table fork is part of the Sola range — a well-established collection of commercial-grade cutlery produced in 18/10 stainless steel. The Lausanne pattern is distinguished by its hammered handle finish, which gives each piece a textured, tactile quality that reads as considered and deliberate on a laid table. It sits comfortably in a contemporary or modern-European dining setting without appearing overly decorative.

In practice, 18/10 stainless steel is the standard specification for front-of-house cutlery in commercial dining environments. The higher nickel content gives it good resistance to corrosion and the discolouration that can develop with repeated commercial dishwasher cycles — a practical consideration in any busy operation where cutlery goes through the machine multiple times a day. The hammered texture on the handle also helps to mask minor surface wear over time, which is worth bearing in mind for high-turnover covers.

• Dishwasher safe for continuous commercial use
• 18/10 stainless steel construction resists rust and acid staining
• Hammered handle finish suits contemporary table settings
• Supplied in a pack of 12 — practical for partial restocking
• Part of the wider Sola Lausanne range for a coordinated cover

The 12-pack format is well suited to topping up an existing set or trialling the pattern before committing to a larger quantity. For new openings or full table restocks, higher-quantity options are worth considering to reduce per-unit cost and ensure consistency across covers.

If you are specifying cutlery across a full restaurant fit-out or want to check pattern availability within the wider Sola Lausanne range, the team is happy to help work through quantities and coordinating pieces.

The Churchill Phoenix table fork is a mid-weight piece of flatware from Churchill's Phoenix range, finished in 18/10 stainless steel. The 18/10 grade provides good resistance to staining and corrosion, which matters in commercial environments where cutlery passes through high-temperature glasswashers and dishwashers repeatedly across a long service life. The design carries a textured finish that gives the range a degree of visual interest without being overtly decorative — it sits comfortably in contemporary restaurant, hotel, and bistro settings.

Supplied in packs of 12, Phoenix table forks are a practical choice for operators who need to maintain consistent table covers without mismatched pieces. Having a reliable matching range available means replacing individual items over time is straightforward, which is a practical consideration worth factoring in when selecting flatware for front-of-house use.

• 18/10 stainless steel construction resists staining through regular commercial dishwasher cycles
• Textured finish suits contemporary table settings without heavy styling
• Consistent weight and balance across the Phoenix range for a uniform table cover
• Supplied in packs of 12, suitable for incremental stock building
• Compatible with other pieces in the Churchill Phoenix flatware range

For lower-budget operations or high-turnover environments where cutlery loss is a regular cost, lighter-gauge or more economical flatware options may be worth considering. Equally, for fine dining where tactile weight is a priority, a heavier-gauge range may be more appropriate. Phoenix sits sensibly in the middle ground for most mid-market hospitality settings.

If you're equipping a new operation or refreshing your flatware across multiple covers, it's worth having a conversation about quantities and whether a full range purchase makes more sense than incremental packs. We're happy to help work through what you need.

The Elia Viola table fork is a contemporary flatware piece from Elia's Viola collection, constructed from 18/10 stainless steel with a mirror polish finish. The clean, modern profile is designed to sit comfortably across both casual dining and more formal table settings without looking out of place in either.

In a busy restaurant or hotel environment, cutlery takes considerable punishment — repeated dishwasher cycles, high-temperature sanitising, and constant handling. The 18/10 stainless steel composition provides good resistance to tarnishing and corrosion under these conditions, and the 3.5mm gauge gives the fork a reassuring weight in hand that communicates quality to the guest without being excessive. Pieces from this collection tend to hold their finish well over time with normal commercial dishwasher use.

From an operational standpoint, the Viola fork offers a few practical advantages worth noting:

• Dishwasher safe, supporting fast turnaround between covers
• Mirror polish finish is straightforward to inspect for cleanliness before service
• Consistent gauge and weight across the collection aids a uniform table presentation
• Supplied in packs of 12, making it easy to order in quantities suited to your cover count

For most restaurant and hotel operations, the Viola range sits comfortably in the mid-to-upper tier of commercial flatware. If your operation runs very high cover volumes with rapid turnaround, it is worth considering your total stock requirement carefully — having sufficient par stock to avoid pieces being rushed back to the table before thorough inspection is a common practical consideration with any flatware range.

If you are building out a full table setting or are unsure how many packs you need for your cover count, the team is happy to talk it through with you.

The Elia Vantage table fork is a professional-grade cutlery piece made from 18/10 stainless steel with a 4.0mm gauge, giving it a solid, balanced feel that guests notice immediately. The highly polished finish has a subtle vintage quality that sits well across a range of table settings, from relaxed dining to more formal covers.

In hospitality environments where cutlery goes through continuous service cycles, the 18/10 steel construction earns its place. It resists the staining and corrosion that lower-grade alloys can develop over time, and it holds its finish reliably through regular commercial dishwasher use. The heavier gauge also means individual pieces are less prone to the bending and distortion that lighter cutlery can suffer in high-turnover operations.

Practical advantages for front-of-house teams include:

• Consistent weight and balance that feels considered rather than cheap to guests
• A finish that maintains its appearance without specialist polishing products
• A pack size of 12 that suits top-up purchasing alongside existing stock

Supplied in packs of 12, the Vantage fork is a practical choice for restaurants, hotels, and event caterers looking for reliable everyday cutlery with a presentable aesthetic. It is worth considering whether a larger case quantity would be more cost-effective if you are equipping a full room or replacing an entire cutlery set.

If you are unsure how many covers to stock for or whether the Vantage range fits the style of your operation, we are happy to talk it through before you order.

The Elia Spectro table fork is a contemporary cutlery piece from an established hospitality tableware brand. It is made from 18/10 stainless steel with a two-tone brushed and mirror finish, giving it a distinctive appearance that sits comfortably in modern dining environments. The 2.8mm gauge construction gives the fork a solid, well-balanced feel that reads as quality to a guest picking it up at the table.

In a professional setting, cutlery takes a great deal of daily use — repeated service, commercial washing, and frequent handling. The 18/10 stainless steel grade is well suited to this kind of sustained use, offering good resistance to staining and corrosion over time. The Spectro's finish holds up reasonably well through regular machine washing, though as with any two-tone cutlery, the long-term appearance depends on water quality and wash chemistry.

The Spectro range is commonly used in restaurants, hotel dining rooms, and function venues where a contemporary table aesthetic matters alongside everyday practicality. It is a practical choice for operators who want something that looks considered without carrying the price point of a premium silversmith range. Supplied in packs of 12, it suits straightforward cover replenishment as well as new setup requirements.

If you are building out a full table setting or matching across multiple cutlery pieces within the Spectro range, it is worth considering your cover count and anticipated attrition rate before ordering. Our team is happy to help work through the quantities if you are unsure where to start.

The Elia Clara table fork is a straightforward, classically proportioned piece of table cutlery designed for everyday use in professional hospitality settings. The clean, unadorned profile sits comfortably across formal dining, casual restaurant covers, and hotel table service without looking out of place in any of them.

Made from 18/10 stainless steel with a mirror-polished finish, Clara presents well under dining room lighting and holds its appearance through repeated dishwasher cycles. The 2.5mm gauge gives the fork a solid, reassuring weight in the hand — the kind of feel that reads as quality to a guest without drawing attention to itself.

For operators, the practical advantages are straightforward:

• Dishwasher safe, reducing turnaround time between covers
• Mirror finish maintains brightness with standard warewashing
• Consistent 2.5mm gauge across the range supports a uniform table presentation
• 18/10 stainless steel resists corrosion and staining in daily service

Clara is supplied in packs of 12, which suits incremental stock building or topping up existing covers. For new openings or larger operations setting up a full house count, it is worth considering how many packs are needed to cover peak service plus a contingency float for breakage and loss.

This pattern is a practical choice for mid-market restaurants, hotels, contract caterers, and function venues where a clean, timeless look is needed across a wide range of covers. If you need a heavier-gauge option for more formal fine-dining settings, there are alternative patterns in the Elia range worth considering.

If you are specifying cutlery across a full opening or want help working out cover counts, we are happy to talk it through.

The Elia Ribbon table fork is a heavy-gauge 18/10 stainless steel fork with a mirror-polished finish and a gently shaped handle featuring subtle ribbon-inspired detailing. It sits within a cohesive flatware range that includes matching fish cutlery and a choice of solid or hollow handle knives, making it straightforward to build a consistent place setting across a dining room.

In a professional dining environment, the weight and balance of the cutlery in a guest's hand matters. The Ribbon fork is produced to a heavier gauge than economy alternatives, which gives it a solid, considered feel without being unwieldy. The mirror finish holds well under regular commercial dishwasher cycles, and 18/10 stainless steel provides good resistance to staining and corrosion over extended service life.

• Suitable for restaurants, hotels, private dining rooms, and event catering
• Consistent finish across the Ribbon range aids uniform table presentation
• Heavy gauge construction supports everyday commercial use
• Mirror polish responds well to standard commercial warewashing
• Available in matching pieces to complete the full place setting

Supplied in packs of 12, the Ribbon fork is well suited to operations building or replenishing stock gradually, or topping up an existing Ribbon collection. It is worth considering your anticipated cover count and breakage rate when deciding on quantity — for larger dining rooms or high-turnover venues, ordering in greater volume from the outset typically works out more practical.

If you are specifying flatware across multiple covers or coordinating a full table setting, we are happy to talk through what quantities and pieces make sense for your operation.

The Sola Bali table fork is a commercially practical piece of flatware from Churchill's Sola range. Finished in 18/0 stainless steel with a mirror polish, it features a subtle embossed handle detail that sits comfortably within contemporary table settings without being overly decorative. Supplied in packs of 12, it is a sensible choice for operators building or replacing cutlery stocks in a measured, cost-controlled way.

In a busy service environment, cutlery takes considerable punishment — repeated dishwasher cycles, stacking, and daily handling. The 18/0 stainless steel composition performs reliably under these conditions, resisting corrosion and maintaining its finish over sustained use. It is fully dishwasher safe, which keeps turnaround straightforward during service.

• Mirror-polished finish suits modern crockery and contemporary table presentations
• Dishwasher safe for efficient post-service cleaning
• Corrosion-resistant stainless steel holds up well to repeated commercial use
• Embossed handle detail adds a considered look without fragile decorative elements
• Pack format makes stock management and gradual builds straightforward

As with all flatware, it is worth considering your full cover count and anticipated attrition rate before ordering. Cutlery loss and damage in busy operations is inevitable over time, so buying in sufficient quantity from the outset avoids service disruption later. The Bali range sits in the mid-range of the Sola portfolio — operators needing a heavier gauge or more formal weight may find other options within the range better suited.

If you are building a complete table setting or matching this to existing Sola pieces, the team is happy to talk through your requirements.

The Churchill Agano table fork is a mid-weight, 18/10 stainless steel fork designed for everyday front-of-house use in restaurants, hotels, and catering operations. Sold in packs of 12, it is a practical buying unit for operators stocking or topping up a cover set.

18/10 stainless steel is the standard specification for commercial cutlery in professional hospitality environments. The higher nickel content gives the steel its corrosion resistance and helps it retain its finish through repeated commercial dishwasher cycles — a practical consideration for any high-volume operation where cutlery is turned around quickly during service.

The Agano pattern is a Churchill UK-designed range, intended to sit confidently on a laid table without being decoratively demanding. It suits a broad range of dining environments, from casual restaurant covers through to more formal settings.

• 18/10 stainless steel construction resists corrosion and staining over time
• Handles repeated commercial dishwasher cycles without significant finish degradation
• Pack of 12 is a convenient restocking unit for most front-of-house operations
• Neutral pattern works across a range of tabletop styles and settings

For operations with very high cover counts or frequent cutlery losses, it is worth considering whether a larger pack quantity or a heavier-gauge pattern would better suit the volume. If you are building out a full cover set or matching across a range, the team are happy to help you work through the options.

The Churchill Trace table fork is a mid-weight, 18/10 stainless steel dining fork designed for commercial foodservice use. Developed in the UK by Churchill, the Trace range sits within their broader cutlery portfolio and is aimed at operators who want a consistent, presentable table setting without the premium price point of heavier silver-service patterns. Sold in packs of 12, it is straightforward to order in the quantities needed for a full cover set.

In day-to-day service, 18/10 stainless steel holds up well under repeated dishwasher cycles, resisting tarnish and maintaining its finish with normal commercial warewashing. The steel grade provides reasonable corrosion resistance, which matters in kitchens where cutlery goes through high-temperature wash cycles multiple times a day. At just under 62g per piece, the fork sits at the lighter end of commercial weight ranges — worth noting for operators where the feel of heavier cutlery is a front-of-house consideration.

• Consistent finish that holds up through commercial dishwasher cycles
• 18/10 steel resists tarnish and corrosion under regular use
• Uniform appearance across the pack for a tidy table presentation
• Practical pack size for building up cover counts incrementally

Trace is well suited to casual dining restaurants, cafés, hotel restaurants with mid-market positioning, and contract catering operations. For fine dining or settings where a heavier, more substantial cutlery feel is important to the guest experience, Churchill offer higher-specification patterns that may be worth considering. If you are building a full cutlery set and want to ensure the Trace range is the right fit for your cover count and service style, the team are happy to talk it through.

The Sola Windsor table fork is a traditionally styled piece of flatware from Churchill's Sola range, manufactured in stainless steel and finished to a standard suited to formal and semi-formal dining environments. Supplied in a pack of 12, it is a practical quantity for operators looking to supplement existing stock or kit out a section without over-ordering.

Windsor is a pattern with soft curves and a double thread detail along the handle, giving it a classic, considered appearance that sits comfortably on a formally dressed table. It is commonly used in hotels, restaurants, and event catering operations where the table setting needs to reflect a certain level of care without requiring silverware.

• Traditional double thread handle detail suits formal table settings
• Stainless steel construction handles repeated dishwasher cycling reliably
• Supplied in a pack of 12 — straightforward to order in multiples for larger covers
• Pattern consistency across the Windsor range supports a coordinated table setting

For venues running high cover volumes, it is worth considering how the pattern wears over time with industrial dishwasher use and frequent polishing. Stainless steel flatware at this level performs well in most operations, but the choice of pattern and weight should suit the service style and the expectations of your guests.

Windsor is well suited to hotel dining rooms, restaurants aiming for a traditional aesthetic, and function or banqueting operations. If you are equipping a venue with a more contemporary setting or a more demanding service environment, it is worth discussing the full Sola range to find the right match.

If you are unsure which pattern or quantity best fits your operation, we are happy to talk it through.

The Sola Oasis table fork is part of Churchill's Oasis cutlery range, a pattern that takes the traditional drop shape and refines it with clean lines and softened curves. The result is a contemporary profile that sits comfortably alongside modern tableware without looking out of place in more traditional settings. Forks are supplied in packs of twelve, making them a practical unit for operators looking to top up existing covers or build out a new table setting.

In day-to-day service, the fork holds up well under the demands of a busy restaurant environment. The polished stainless steel finish is resistant to everyday wear and maintains its appearance through repeated commercial dishwasher cycles, which reduces the time staff spend inspecting or polishing cutlery before service.

• Contemporary drop-shape pattern suits a range of dining styles
• Polished finish requires minimal pre-service attention
• Dishwasher safe for straightforward end-of-service cleaning
• Supplied in packs of twelve to suit cover-by-cover purchasing
• Consistent sizing across the Oasis range supports a uniform table layout

It is worth noting that 18/0 stainless steel contains no nickel, which makes it slightly more susceptible to surface marking over time compared to 18/10 grades — though for most hospitality settings it performs reliably and represents a cost-effective choice at volume. Operators running high-turnover covers where cutlery takes a heavier workload may wish to consider whether a higher-grade steel specification is appropriate for their service style.

This fork is well suited to restaurants, hotels, contract catering operations, and event venues looking for a clean, modern cutlery pattern at a sensible price point. If you are building a full place setting or selecting cutlery across multiple table grades, the team is happy to help you match patterns and quantities to your covers — feel free to get in touch.

The Sola Montreux table fork is part of Churchill's Montreux cutlery range, a pattern designed with clean, minimal lines suited to contemporary and fine dining settings. The forks are manufactured from stainless steel and finished to a high mirror polish, giving them a refined appearance that holds up well under regular commercial use.

In a busy restaurant environment, cutlery takes considerable punishment — repeated dishwasher cycles, high-volume service, and daily handling all test the resilience of a pattern. The Montreux range is designed to maintain its finish and resist the surface marking and dulling that can affect lower-grade cutlery over time, making it a practical choice for operators who want a smart table presentation without constant replacement.

• Mirror-polished finish suits formal and contemporary cover settings
• Stainless steel construction withstands repeated commercial dishwasher cycles
• Supplied in packs of 12, practical for building or topping up covers
• Smooth, minimal profile is straightforward to handle and clean

The forks are supplied in packs of 12, which suits both initial set-up and ongoing replenishment. It is worth considering your cover count and anticipated breakage rate when calculating how many packs to order — most operators hold a small reserve to cover losses during service.

If you are unsure whether the Montreux pattern fits your table setting or need guidance on quantities for your cover count, the team is happy to help you work it out before you order.

The Sola Lotus Airside table fork is part of Churchill's Sola Lotus range, a pattern designed with a clean angular profile and a polished finish. Manufactured from 18/0 stainless steel, it is a practical, straightforward piece of flatware built for consistent front-of-house use in catering environments where volume and durability matter more than silverware weight.

The 18/0 grade stainless steel construction is commonly specified in high-throughput catering operations — particularly airside hospitality, contract catering, and institutional foodservice — where cutlery cycles through dishwashers repeatedly over the course of a service period. The material offers reliable corrosion resistance and holds its appearance well under regular commercial cleaning.

From an operational standpoint, the Lotus Airside fork offers a few practical advantages worth noting:

• Dishwasher safe — suited to fast-turnaround service environments
• Uniform angular pattern makes sorting and wrapping straightforward
• High-shine finish presents well on a laid cover without specialist polishing
• Pack of 12 supports incremental stock top-ups without over-ordering

There are no special installation or storage requirements. As with all commercial flatware, performance and longevity are influenced by the quality of the dishwasher rinse cycle and whether appropriate cutlery baskets are used to prevent nesting, which can lead to uneven cleaning.

This fork is well suited to catering operators looking for a presentable, hard-wearing everyday pattern at a practical price point. It is a reasonable choice for airside catering, contract dining, and event catering where a consistent look is needed across a large cover count. Operators requiring a heavier gauge or a sterling-silver-effect finish may find other patterns in the wider Sola range more appropriate for their setting.

If you are equipping a new site or standardising across an existing operation, our team is happy to help you work out the right quantities and patterns before you commit to an order.

The Sola Lotus salad fork is part of Sola's Lotus cutlery range, a contemporary pattern characterised by clean angular lines and a high-shine finish. Manufactured from stainless steel, each fork is designed to sit comfortably alongside other pieces in the Lotus collection, making it straightforward to build or extend a matching table setting. The pack contains 12 forks, which suits a practical reorder or initial stocking quantity for most operations.

In a hospitality environment, salad forks see consistent use across covers and need to retain their appearance through repeated commercial dishwasher cycles. The Lotus fork is well suited to that pattern of use — the finish holds up under regular washing, and the angular profile does not present any awkward recesses that complicate cleaning.

• Angular contemporary profile suits modern and traditional table settings alike
• High-shine finish maintained through regular commercial dishwasher use
• Sold in packs of 12 for practical stock management
• Part of the broader Lotus range for consistent pattern matching across covers
• Stainless steel construction resists corrosion in high-use service environments

There are no special installation or storage requirements. Standard cutlery storage and sorting arrangements apply. For operations running high cover counts, it is worth considering stock depth across the full Lotus range to avoid pattern mixing during busy service periods.

The Lotus salad fork is well suited to restaurants, hotels, contract caterers, and event venues looking for a consistent, well-finished cutlery pattern at a practical price point. If you are equipping a larger operation or need guidance on quantities across a full cutlery range, the team is happy to help you work through what you need.

The Sola Lotus table fork is part of Churchill's Sola range — a line of stainless steel cutlery designed for professional food service environments. The Lotus pattern has a clean, angular profile with a high-shine finish, making it a practical choice for operators who want contemporary-looking cutlery without an overly decorative style.

In a busy service environment, cutlery takes a great deal of daily handling, stacking, and repeat dishwashing. The Lotus fork is manufactured from 18/0 stainless steel, which performs reliably under the rigours of commercial warewashing and resists everyday tarnishing well. The finish holds up under regular use, and the straightforward design means there are no intricate details to trap food residue or slow down polishing.

• Angular contemporary profile suits modern table settings
• High-shine finish suitable for formal and informal dining
• Dishwasher safe for efficient warewashing turnaround
• Sold in packs of 12, making stock management straightforward

For front-of-house teams, having cutlery that emerges cleanly from the dishwasher and requires minimal polishing time is a practical advantage during changeovers between covers. The pack-of-12 format allows operators to build and replenish stock in manageable quantities.

The Lotus range is well suited to restaurants, hotel dining rooms, and contract catering operations looking for durable everyday cutlery with a clean modern appearance. If you require a pattern with a heavier gauge or a more formal aesthetic, the broader Sola range includes alternatives worth considering.

If you are standardising cutlery across a new venue or replacing an existing pattern, feel free to get in touch — we are happy to help you work through quantities and pattern options before you commit.

The Sola Ibiza table fork is a mid-weight stainless steel fork from Churchill's Sola range, designed for use in restaurants, hotels, and hospitality venues where a clean, contemporary table setting is required. The slimline tapered handle and soft curves give the piece a refined appearance without moving into overtly decorative territory, making it a practical choice across a range of dining styles.

In a busy service environment, consistent presentation matters. These forks offer a uniform mirror-polished finish across the pack, which helps maintain a tidy cover lay throughout a full service. The stainless steel construction holds up well to regular commercial dishwasher cycles, and the finish is resistant to the dulling that can affect lower-grade cutlery over time.

• Dishwasher safe for straightforward end-of-service cleaning
• Mirror-polished finish maintains appearance across a full cutlery set
• Slimline profile suits contemporary and traditional covers alike
• Sold in packs of 12, making it easy to order to cover count

As with all cutlery at this gauge, it is worth considering your total cover count and buffer stock when placing an order — having sufficient pieces in rotation reduces handling stress on individual items and keeps your service running smoothly during peak periods.

If you are building out a full cutlery selection or matching to an existing Sola pattern, the team is happy to help you work out quantities and check compatibility across the range.

The Sola Donau table fork is part of Churchill's Sola cutlery range, designed for use in restaurants, hotels, and hospitality venues. It features a gently arched handle with a soft, flowing profile and a high-shine finish, giving it a presence that works across both formal dining and more relaxed table settings.

In everyday service, this fork holds up well to the demands of a busy dining room. The 18/10 stainless steel construction offers good corrosion resistance and maintains its finish through repeated dishwasher cycles, which matters in any operation running multiple covers per service. The gauge gives the piece reasonable weight in the hand without feeling unwieldy — an important consideration when cutlery spends its life being handled, washed, and reset dozens of times a day.

• Dishwasher-safe for efficient post-service cleaning
• High-shine finish suitable for formal and informal covers
• 18/10 stainless steel resists staining and corrosion over time
• Flowing handle profile works well across a range of tableware styles
• Sold in packs of 12, practical for topping up existing stock

This fork is well suited to mid-range restaurants, hotel dining rooms, and function venues looking for a reliable everyday cover that presents well without the cost of a premium silverware range. It is a sensible choice for operations that need consistency across a large number of place settings. Sites with very high turnover or banqueting volumes may want to consider a heavier-gauge option from the wider Sola range.

If you are building or refreshing a full cutlery cover and want to make sure the Donau range fits your table setting and service style, our team is happy to talk it through.

The Elia Aspect table fork is part of Elia's Aspect cutlery range, produced in 18/10 stainless steel with a mirror finish. The design features a broad, square-based handle that tapers into a well-balanced profile, giving the piece a solid feel in the hand without appearing heavy on the table. At 205mm in length, it sits comfortably within standard table fork sizing for a formal or semi-formal cover.

In a busy restaurant or hotel dining environment, cutlery takes considerable daily punishment — repeated service, commercial dishwasher cycles, and bulk handling in sorting trays. The 18/10 stainless steel construction gives the Aspect fork good resistance to corrosion and tarnishing under those conditions, and the mirror finish, while requiring proper dishwasher chemistry and drying to maintain its appearance, holds up well with routine care.

• Consistent weight and balance across the set, supporting a uniform table presentation
• Mirror finish suits formal dining, banqueting, and hotel restaurant covers
• 18/10 steel grade offers reliable corrosion resistance through repeated commercial dishwasher use
• Sold in packs of 12, practical for building or topping up cover sets

The Aspect range is worth considering for operations that want a clearly defined, structured cutlery profile without moving into heavily decorative or ornate patterns. It works well in contemporary restaurant settings, private dining rooms, and hotel covers where a clean, substantial look is appropriate. For very high-volume canteen or casual dining environments where cutlery loss and replacement is a frequent concern, a simpler pattern at a lower price point may be a more practical choice.

If you're specifying cutlery across a full cover — or need to match Aspect forks with the wider range — the team is happy to help work through quantities and pattern combinations before you order.

The Sola Lima table fork is part of Churchill's Lima cutlery range, finished with a distinctive hammered-effect surface that gives each piece a tactile, textured appearance. Constructed from stainless steel, the fork is a practical choice for operators looking to add a considered aesthetic to their table settings without compromising on durability.

In a busy dining environment, cutlery takes a great deal of daily handling, stacking, and machine washing. The Lima fork holds up well under regular commercial use and is dishwasher safe, which keeps turnaround times manageable during a busy service. The hammered finish also tends to be more forgiving of minor surface marks than a high-gloss polish, which is a practical consideration in high-covers environments.

• Dishwasher safe for straightforward end-of-service cleaning
• Hammered-effect finish adds visual texture to table presentations
• Stainless steel construction suits regular commercial use
• Sold in packs of 12, suitable for building or topping up covers

As a smaller pack size, the Lima table fork is well suited to independent restaurants, cafés, and smaller dining operations building out their cutlery stock, or to any operator wanting to trial the range before committing to larger quantities. It pairs naturally with complementary pieces from the Lima range to create a consistent table setting.

If you'd like guidance on quantities for your covers or advice on how the Lima range fits alongside your existing tableware, we're happy to help.

The Churchill Raku table fork is part of the dedicated cutlery range designed to accompany Churchill's Raku crockery collection. Made from 18/10 stainless steel, the fork features an embossed handle pattern that echoes the distinctive, textured glaze aesthetic of the Raku tableware line. This makes it a considered choice for operators who want their cutlery and crockery to work together as a coherent table setting rather than as unrelated pieces.

In practical terms, 18/10 stainless steel offers good corrosion resistance and holds up well under repeated commercial dishwasher cycles, which matters in any busy food service environment. The embossed handle adds tactile interest without compromising grip or comfort during service.

This fork is best suited to restaurants, bistros, and hospitality venues that are already using or planning to use the Churchill Raku crockery range, and where a coordinated, design-led table presentation is part of the offering. It is equally at home in casual dining settings as in more considered, independent restaurant environments.

Sold in packs of 12, the quantity is practical for smaller operations or for supplementing an existing stock. Higher-volume sites covering multiple sittings may want to consider ordering several packs to maintain adequate cover through service without relying on mid-service dishwasher turnaround.

If you're building out a full Raku table setting or unsure how many covers your cutlery stock needs to support, we're happy to help you work it through.