Drawer Warmers

The Hatco HDW-1N is a free-standing, narrow single-drawer warmer designed to bridge the gap between preparation and plating by holding hot food at a consistent, safe serving temperature. It accepts a standard-depth food pan and operates from a standard mains socket, requiring no dedicated electrical installation. Individual thermostatic control allows kitchen staff to set a precise holding temperature independently of any other equipment sharing the pass or service counter.

In practice, units of this type are most commonly used to hold portioned proteins, bread rolls, sauces, or side dishes through a busy service period. The recessed thermostat lets operators dial in the right temperature for the food type, reducing the risk of food drying out or dropping below a safe holding temperature before it reaches the pass. Vented sides support even heat distribution across the pan.

Practical day-to-day advantages include:

• Individual thermostatic control for food-safe, consistent holding throughout service
• Narrow footprint suits tight counter and pass configurations where space is limited
• Heavy-gauge stainless steel construction holds up reliably under regular commercial use
• Compatible with standard food pan depths, fitting neatly into existing service routines
• Plug-and-go operation via a long power cord allows flexible positioning without dedicated wiring

Installation is straightforward — no specialist electrical work, plumbing, or ventilation infrastructure is required. It is worth measuring your available counter depth carefully before ordering to confirm the unit will sit comfortably within your pass layout.

The HDW-1N is well suited to smaller operations — cafés, delis, pub kitchens, or compact restaurant passes — where a single drawer covers the holding demand across a service period. For higher-volume kitchens running multiple concurrent sections, a multi-drawer or wider-format model would provide greater throughput without compromising holding quality.

If you are weighing up whether a single drawer is the right capacity for your service, we are happy to talk it through with you.

The Victor HD75VM is a free-standing, three-drawer hot food holding unit designed to sit at or near the pass and bridge the gap between cooking and service. Each drawer accepts gastronorm containers and is heated by a fan-circulated system that moves warm air evenly around the food rather than relying on radiant heat from below. An integral water tray in the base introduces controlled humidity into the holding environment, which helps food retain its texture and appearance during extended holds — a practical advantage over simpler dry-heat warmers where food can deteriorate quickly.

In a working kitchen, the ability to batch-cook ahead and hold food at a consistent temperature without quality loss is central to managing service pressure effectively. The three independent drawers mean different dishes or courses can be held simultaneously at appropriate temperatures, giving kitchen teams the flexibility to prepare in advance and release food to the pass in good condition when covers land. This suits multi-course restaurant service, carvery operations, and any kitchen where throughput relies on food being ready and holding well rather than being cooked to order throughout service.

From an operational standpoint, the unit offers several practical advantages worth noting:

• Three independent drawers allow simultaneous holding of different dishes without flavour transfer
• Fan-circulated heat delivers more consistent temperature distribution than static warmers
• Integral humidity tray reduces drying during extended holding periods
• Thermostatic control allows temperature to be set to suit the food type being held
• Mobile on four castors, two locking, for flexible and stable positioning at the pass

The HD75VM runs from a standard 13-amp plug, which removes the need for dedicated electrical installation or trade wiring. It is entirely free-standing with no fixed connection requirements, making it straightforward to position and reposition as service demands change. The locking castors should be engaged during service to keep the unit stable. Stainless steel interior and exterior surfaces clean down efficiently, which matters in a busy end-of-service environment.

This unit is well suited to restaurants, hotel kitchens, pub operations, and contract catering environments where pre-service holding is a regular part of the workflow and service volume is moderate and consistent. It performs at its best where a dedicated holding station at the pass improves throughput and presentation standards without the need for a large-footprint unit. For very high-volume operations holding across a large number of covers simultaneously, a higher-capacity unit may be worth considering. For occasional or light holding use, a smaller format might offer better value for the application.

If you are weighing the HD75VM against your service volumes or pass layout, we are happy to talk through whether it is the right fit before you commit.

The Roller Grill CB20 is a compact electric warming cabinet designed specifically to hold hot dog buns at a consistent serving temperature. Its purpose is focused: to ensure buns are warm, soft, and ready the moment a hot dog comes off the grill, without drying out or hardening during service.

In practice, the CB20 earns its place at concession stands, stadium kiosks, leisure venues, and snack bars where hot dogs are served at volume. Having buns pre-warmed and immediately to hand removes a common service bottleneck — operators can fulfil orders continuously without interruption, which matters when queues form quickly at peak times. The gentle, consistent heat keeps buns palatable throughout a full service period rather than leaving them to cool on the counter or deteriorate in an unsuitable environment.

• Maintains bun temperature consistently throughout service without drying them out
• Designed to complement Roller Grill hot dog grilling equipment as a coordinated station
• Compact footprint suited to tight counter space in kiosks, carts, and snack bars
• Simple electric operation with low running demands
• Easy to wipe down and clean between or after service

The CB20 is sized for moderate, steady service volumes. It works well as part of a compact Roller Grill hot dog station where throughput is consistent but not extreme. For higher-volume sites operating across extended service periods with rapid turnover, a larger-capacity warming solution may be worth considering.

If you are putting together a hot dog station and want to make sure the setup works for your volume and space, we are happy to talk it through before you order.

The Victor HD75RU is a three-drawer under-counter hot holding unit designed to provide a dedicated staging point between production and service. Each drawer holds two full-size 150mm-deep gastronorm containers, giving the kitchen a reliable buffer for pre-prepared dishes without consuming oven space or adding to pass clutter.

Rather than relying on static bottom heat, the unit uses fan-blown air circulation to distribute warmth consistently across all three drawers. An integral water tray introduces humidity into the holding environment, which makes a meaningful difference over extended service periods — proteins, portioned dishes, and vegetables hold their texture and moisture rather than drying out at the edges. That combination of even air movement and humidity management is what separates this type of unit from a basic warming drawer or heated shelf.

From a day-to-day operational standpoint, the HD75RU offers several clear advantages:

• Under-counter profile keeps the pass and prep surfaces clear of additional countertop equipment
• Fan-circulated heat reduces the temperature variation that causes quality inconsistency across drawers
• Humidity tray helps maintain food texture over longer holding windows
• Thermostatic control allows the temperature to be adjusted for different food types
• Stainless steel interior and exterior support straightforward end-of-service cleaning

The unit runs from a standard 13-amp supply with a fitted plug and cable, so no dedicated electrical provision or trade installation is required. It is built to sit beneath a standard-height work surface — worth measuring against your existing bench before ordering. The humidity tray is filled manually; there is no mains water connection. The rear panel is galvanised rather than stainless steel, which is worth bearing in mind if the unit will be positioned in a high-moisture area or tight against a wall.

The HD75RU is well suited to restaurants, hotels, staff canteens, and similar operations that batch food in advance and run structured service periods. It works particularly well where pass space is limited and an under-counter holding position is preferable to a countertop unit. Sites running very high covers or requiring significantly greater simultaneous capacity may find a larger or multi-unit configuration more appropriate.

If you would like to talk through whether this unit fits your service volume and kitchen layout, the team is happy to help before you commit.

The Hatco HDW-2 is a free-standing two-drawer food warmer designed to hold prepared dishes at consistent serving temperatures until they reach the pass. Each drawer operates independently with its own thermostat, which means different food types can be held at different temperatures simultaneously — a genuinely practical arrangement where a kitchen is running multiple menu components with different holding requirements.

In a busy service environment, consistent temperature holding directly affects food quality and presentation. The HDW-2 is built to run reliably through extended service periods without the temperature drift that can catch operators out during a long push. The stainless steel construction is robust enough to handle the day-to-day demands of a working kitchen, and the unit is designed to clean down quickly as part of a regular hygiene routine.

From an operational standpoint, the key practical advantages are:

• Independent thermostatic controls per drawer allow simultaneous holding at different temperatures
• Vented drawer sides help manage moisture and preserve food quality during holding
• Deep food pans provide meaningful holding capacity across a range of products
• Stainless steel construction throughout supports straightforward daily cleaning
• Free-standing on legs — no fixed installation or specialist groundwork required

Setup is straightforward. The HDW-2 requires only a standard electrical connection and can be positioned on a countertop or within a pass area without permanent installation work. There is no requirement for plumbing or dedicated ventilation. It is worth confirming the surface is level and that the power cord can reach the supply directly without an extension lead.

The HDW-2 is well suited to cafés, pub kitchens, hotel restaurants, and similar small to medium-sized operations where a compact, dependable holding solution is needed without the footprint of a larger unit. Kitchens holding high volumes across several food categories simultaneously may find a unit with greater drawer capacity more appropriate.

If you are weighing up whether the HDW-2 fits your pass layout or service volumes, the team is happy to talk it through with you.

The Hatco HDW-2N is a freestanding two-drawer food warmer designed to hold cooked items at safe serving temperatures throughout service. Each drawer operates independently with its own thermostatic control, so different food types can be held at different temperatures simultaneously. A temperature monitor gives service staff a visible reference without needing to open the drawers, which helps maintain consistent holding conditions during a busy pass.

On the pass, a drawer warmer fills a specific and important role — bridging the gap between production and service. Proteins, sides, bread rolls, and plated components can be staged and held without deteriorating in quality or temperature. The two-drawer layout gives this unit enough practical capacity for smaller or more focused services, and the narrow profile is a deliberate design choice that makes it viable in locations where a standard-width warmer simply would not fit. Vented sides help regulate conditions inside the drawers during extended holding periods.

Practical operational advantages include:

• Independent drawer controls allow simultaneous holding of different food types at different temperatures
• Narrow footprint suits tight pass and counter configurations
• Visible temperature monitor supports service staff without disrupting holding conditions
• Heavy-gauge stainless steel construction suited to daily commercial use
• Freestanding on legs with plug-and-play installation requiring no fixed mounting

Installation is straightforward. The unit stands on legs and is supplied with a power cord and plug, so it can be positioned and brought into service without specialist installation work. You will need a suitable mains socket at the point of use, and it is worth confirming the local supply meets the unit's power requirements before ordering.

The HDW-2N is well suited to smaller restaurants, café kitchens, pub operations, and grab-and-go counters where a compact, reliable hot holding solution is needed without committing significant counter space. For higher-volume kitchens or operations requiring greater simultaneous holding capacity, a wider or higher-capacity model within the Hatco range would be worth considering.

If you are unsure whether this unit fits your service style or kitchen layout, our team is happy to talk it through before you commit.

The Lincat FWDG is a free-standing electric food warming unit with three independent drawers, designed to hold plated dishes, cooked food, and serving vessels at a consistent serving temperature throughout service. Supplied with full-size GN pans and a removable water tray, it is built around the practical demands of a working pass rather than as an occasional supplement to the kitchen.

In a commercial kitchen, the ability to hold food at stable temperature without compromising quality is a genuine operational requirement. The FWDG maintains a consistent holding temperature across all three drawers simultaneously, while the integrated humidity facility — fed by the water tray — helps prevent food from drying out during extended holding periods. This is most valuable during high-demand service windows where dishes are plated ahead of the pass and need to reach the customer in good condition.

From a day-to-day operational standpoint, the unit offers several practical advantages:

• Consistent holding temperature maintained across all three drawers throughout service
• Humidity control preserves food texture and appearance during longer holds
• Full insulation keeps exterior surfaces cool, reducing burn risk in busy pass areas
• Removable drawers make end-of-service cleaning straightforward
• Stainless steel runners support reliable, quiet drawer operation over time

As a free-standing unit, the FWDG requires only a standard electrical connection and a stable, weight-rated surface. There is no requirement for plumbing, gas, or extraction, which gives reasonable flexibility when positioning it within the kitchen or at the pass. It is worth being clear about its role: this is a holding tool, not a regeneration unit. Food must reach the correct serving temperature before loading — the FWDG maintains that temperature, it does not achieve it from cold.

The unit is well suited to restaurants, hotels, pub kitchens, and contract catering operations where a dependable holding solution is needed at or near the pass. For very high-volume operations serving across multiple sections simultaneously, it is worth considering whether a greater drawer capacity would better support the workflow.

If you would like to discuss whether this unit is the right fit for your service volumes and kitchen layout, the team is happy to talk it through.

The Hatco HDW-3N is a free-standing, narrow-profile drawer warmer with three independently controlled holding drawers. Its purpose is straightforward: to hold prepared foods at safe serving temperatures in the window between production and service, without continuing to cook them. It is built for continuous daily use in commercial environments and asks very little of the operator in terms of installation or ongoing management.

In working kitchens, drawer warmers tend to earn their place quietly. The HDW-3N holds cooked proteins, bread rolls, portioned sides, and plated accompaniments while service runs. The narrow footprint makes it a practical choice where pass or counter space is at a premium but three separate holding zones are still needed. Because each drawer has its own thermostat, different foods can be held at different temperatures simultaneously — removing the compromise that comes with a single shared-temperature unit.

The practical advantages of this unit come from its construction and operational simplicity:

• Independent thermostat per drawer allows different foods to be held at different temperatures at the same time
• Heavy-gauge stainless steel construction withstands continuous daily service demands
• Vented sides support even heat distribution within each drawer
• Raised on legs to keep the area beneath accessible for cleaning
• Single power switch and straightforward controls reduce the training burden on kitchen staff

Installation is uncomplicated. The HDW-3N is a plug-in electric unit requiring only a suitable mains socket — no gas, water, or extraction connections are needed, which gives reasonable flexibility in placement. The narrow profile does reduce per-drawer capacity compared with standard-width models, so it is worth confirming that your standard pan or tray sizes fit the drawer dimensions before ordering. This is the one practical check that catches operators out.

This model is well suited to smaller and mid-sized operations: cafés, pubs, hotel restaurants, and à la carte kitchens where a compact, reliable holding solution is needed close to the pass. For higher-volume sites running extended services with greater throughput demands, a wider or higher-capacity model would be worth considering.

If you would like to talk through whether the HDW-3N fits your pass configuration and service requirements, the team is happy to help before you commit to an order.

The Hatco HDW-3 is a free-standing drawer warmer with three enclosed holding drawers, each independently temperature-controlled. Its purpose is practical and specific: to hold prepared foods at consistent serving temperatures during the gap between production and service, reducing the moisture loss and temperature drift that open holding methods tend to introduce.

In a busy service environment, that window between the pass and the plate is where food quality is most vulnerable. Enclosed drawer holding maintains a more stable environment around the food than open heat lamps or bain-marie trays. With three separately controlled drawers, kitchen teams can hold proteins, sides, and bread simultaneously at their respective appropriate temperatures rather than compromising on a single shared setting. The stainless steel construction is built to handle the wear of continuous daily use, and vented sides support consistent heat distribution during extended holding periods.

From an operational standpoint, the HDW-3 offers several practical advantages:

• Three independently controlled drawers allow simultaneous holding of different food types
• Enclosed drawer design reduces surface moisture loss versus open holding methods
• Individual thermostatic control supports consistent plate quality across menu components
• Free-standing format allows flexible positioning on a pass or servery without fixed installation
• Plug-fitted power cord means no hardwiring is required in most settings

Because it arrives plug-fitted, installation is generally straightforward. It is worth confirming that your pass layout can comfortably accommodate a three-drawer footprint before ordering — it is notably larger than a one- or two-drawer equivalent, and that difference matters on a tight pass.

The HDW-3 is well suited to mid-volume operations such as pub kitchens, hotel restaurants, and casual dining sites where holding a small number of food categories consistently through service is a daily requirement. Smaller operations or those with limited pass space may find a one- or two-drawer configuration more practical, while very high-throughput kitchens holding a wider range of menu components may benefit from a higher-capacity unit.

If you would like to talk through whether the HDW-3 is the right fit for your pass setup and service pattern, the team is happy to work through that with you before you commit.

The Alto-Shaam 500-3D is a three-drawer holding unit built around Alto-Shaam's Halo Heat system — a low-wattage, radiant heat cable that wraps the entire cavity rather than relying on a fan or element to force hot air around the food. The result is a stable, even heat environment that holds food at serving temperature without continuing to cook it or draw out moisture.

In practice, this makes a noticeable difference during service. Proteins stay juicier for longer, portion-ready items maintain their texture, and operators have a wider holding window before quality starts to decline. For kitchens running multiple covers or dealing with uneven service flow, that margin is genuinely useful. Each drawer operates independently, which means you can hold different items at different temperatures simultaneously — a practical advantage in kitchens preparing varied menus.

Key operational characteristics include:

• Independent drawer control for multi-temperature holding across three zones
• Radiant Halo Heat system minimises moisture loss during extended holding
• Wide temperature range supporting everything from delicate pastry to hot roasted meats
• Self-contained unit with no external water connection required
• Straightforward drawer mechanism with accessible interior for cleaning

The unit is a freestanding or countertop installation — it does not require a water supply or extract ventilation, which simplifies placement considerably. At 68kg it is weighty enough that positioning should be planned in advance, particularly if it is going onto a shelf or counter with a load rating to consider. Electrical connection should be confirmed with a qualified installer before fitting.

The 500-3D suits operations where consistent hold quality matters as much as throughput — gastro pubs, hotel kitchens, restaurant pass areas, and catering operations where food is prepared in batches ahead of service. For higher-volume operations requiring more drawer capacity, larger configurations within the Alto-Shaam range are worth considering.

If you are unsure whether this model fits your service volumes or pass layout, our team is happy to work through the specifics with you before you commit.

The Alto-Shaam 500-2DI is a two-drawer holding unit designed to keep prepared food at consistent serving temperature without the need for added water or steam. Each drawer operates independently, allowing different food types to be held at different temperatures simultaneously — a practical advantage during varied service periods where multiple dishes need to be ready at the pass at the same time.

At the core of the unit is Alto-Shaam's Halo Heat technology, which uses a low-wattage radiant cable rather than conventional heating elements or wet heat. This approach circulates gentle, even warmth throughout the drawer cavity, preserving food quality, texture, and moisture without the risk of overcooking or drying out. In a busy kitchen environment, that consistency across a full service period is where this type of unit earns its keep.

The independent controls on each drawer make this unit particularly well suited to kitchens running mixed menus — holding proteins in one drawer while maintaining sides or sauces in the other, without compromise to either. Practical benefits include:

• Individual temperature control per drawer for multi-product holding
• No added humidity means no condensation or sogging of food surfaces
• Stainless steel construction supports straightforward daily cleaning
• Compatible with 1/1 GN pans for easy integration with standard kitchen workflows
• Quiet, low-heat operation reduces ambient heat load in the kitchen

Installation is relatively straightforward — the unit is electrically powered and does not require a water or gas connection, which simplifies placement. At 52kg it is a substantial piece of equipment, so bench strength and positioning should be considered before installation. The footprint is compact enough for counter or under-pass placement in most commercial kitchen layouts.

The 500-2DI is well suited to restaurants, hotel kitchens, and contract catering operations where consistent food holding is a daily requirement. For higher-volume operations needing greater capacity, larger multi-drawer configurations are available in the Alto-Shaam range. Equally, for sites with minimal holding requirements, a single-drawer unit may be sufficient.

If you're unsure whether this model fits your service volume or kitchen layout, our team is happy to talk it through before you commit to a purchase.

The Vizu VIGWCOMP is a heated warmer drawer designed for hot holding cooked food in a temperature-controlled, humid environment. It accepts a full 1/1 GN tray or up to three 1/3 GN pans, making it a practical solution for operations that need to hold multiple food types simultaneously without compromising quality or safety. It can be used as a standalone countertop unit or installed alongside compatible Vizu Fast Serv servery modules for a more integrated front-of-house setup.

In busy service environments, consistent holding temperature is critical. The VIGWCOMP maintains a stable warming environment and includes a removable water tray that allows operators to introduce humidity — useful for holding foods that deteriorate quickly when exposed to dry heat. Digital controls are clear and straightforward, reducing the likelihood of misuse during busy service periods. The stainless steel construction holds up well in the demanding conditions typical of commercial kitchens.

Practically, this unit suits a range of hot holding needs:

• Humidity control helps prevent food from drying out during extended holding
• Digital temperature controls are simple to set and monitor during service
• Removable water tray makes routine cleaning more manageable
• Accepts standard GN pans, so no specialist servingware is required
• Compact footprint suits servery counters where space is limited

Installation is relatively straightforward — the unit requires a standard electrical connection and no specialist ventilation. At 40kg it is substantial enough to sit stably on a counter but light enough to reposition if your servery layout changes. It is worth confirming counter depth and clearance before fitting it into a modular run, particularly if you are integrating it with other Vizu servery components.

The VIGWCOMP is well suited to cafés, staff restaurants, pub kitchens, and similar operations running a moderate-volume carvery, buffet, or plated service where reliable hot holding across a small number of dishes is the priority. For larger operations holding a wider range of dishes across higher volumes, a higher-capacity warmer or multi-drawer configuration may be worth considering.

If you are unsure whether this unit fits your service style or servery layout, our team is happy to talk through your setup before you commit to anything.

The Vizu VIGWCOMP2DR is a two-drawer hot holding unit designed to keep cooked foods at safe serving temperatures for extended periods during service. Each drawer accepts a full 1/1 GN tray or up to three 1/3 GN pans, giving operators flexibility to hold multiple menu items simultaneously within a compact footprint. The unit is built in stainless steel and is suited to countertop installation or integration alongside compatible Vizu modular components.

In a busy kitchen environment, reliable hot holding can be as critical as the cooking process itself. The VIGWCOMP2DR maintains a stable, temperature-controlled environment within each drawer, with removable water trays that allow humidity to be introduced where needed — useful for foods that dry out quickly under conventional lamp or dry-heat holding. Digital controls make it straightforward for service staff to operate and monitor without distraction during a busy pass.

Practical advantages for kitchen operators include:

• Humidity-assisted holding reduces food quality deterioration during extended service periods
• Independent drawers allow different food types to be held at the same time
• Removable water trays and a smooth internal finish simplify daily cleaning
• Digital temperature controls reduce the risk of incorrect settings during service
• Compact dimensions suit tight pass or countertop positions without occupying undue space

The unit runs on a standard mains supply at 0.6kW, which means no specialist electrical installation is typically required, though positioning near an appropriate socket and ensuring adequate ventilation around the unit should be confirmed before installation. At 540mm high and 605mm wide, it fits neatly into most countertop or under-counter configurations, though the exact workflow position should be considered in relation to the pass and cooking line.

This unit is well suited to cafés, small restaurants, pub kitchens, and event catering operations where a reliable, easy-to-manage hot holding solution is needed without the scale of a full-size heated gantry or pass. For higher-volume operations running multiple GN lines simultaneously, a larger-capacity hot holding arrangement may be worth considering.

If you're unsure whether this drawer configuration suits your service style or menu, the team is happy to talk through the options with you before you commit.

The Alto-Shaam 500-2D is a two-drawer holding unit built around Alto-Shaam's Halo Heat system — a low-wattage, radiant heat technology that surrounds food with consistent, even warmth rather than relying on forced air or high-intensity elements. The result is a holding environment that keeps food at the correct serving temperature without accelerating moisture loss, skin formation, or surface drying.

In a busy kitchen, the difference between a holding drawer and a good holding drawer shows up during service. Where conventional warmers can leave proteins drying at the edges or sauces skinning over within twenty minutes, the Halo Heat approach is noticeably gentler. Food held in the 500-2D tends to reach the pass in a condition much closer to how it left the stove or oven, which matters when covers are stacking up and timing is difficult to control precisely.

Practical advantages for kitchen teams include:

• Consistent temperature across the full drawer — no hot spots at the element
• Wide temperature range gives control over different food types from the same unit
• Two independent drawers allow simultaneous holding of items at different temperatures
• Low energy draw relative to the holding capacity makes it economical in continuous use
• Simple drawer-pull access suits fast-paced pass environments

Installation is straightforward for a unit of this type. The 500-2D is an electric unit and requires a suitable power supply — confirm the electrical specification with your installation team before ordering. It is a countertop or pass-through unit, so there are no complex ventilation requirements, though adequate clearance around the unit is advisable. At 52kg it is a substantial piece of kit and will need two people to position correctly.

This unit is well suited to mid-volume operations — hotel kitchens, pub restaurants, and contract catering sites where holding capacity needs to be reliable but space on the hot pass is limited. For higher-volume sites running multiple service lines simultaneously, a larger or multi-drawer configuration may be worth considering. Equally, for operators who only need occasional holding, a single-drawer option may suffice.

If you are unsure whether the 500-2D fits your service volume or pass layout, our team is happy to talk it through with you before you commit.