Elia Ribbon

The Elia Ribbon butter knife is a flatware piece from Elia's Ribbon collection, made from 18/10 stainless steel with a high-polish mirror finish. The handle carries a subtle ribbon-inspired detail that gives the range a clean, considered aesthetic without veering into overly ornate territory — a balance that works well across a range of dining styles, from contemporary hotel restaurants to private members' clubs and quality casual dining.

In day-to-day service, butter knives of this type see significant handling — by front-of-house staff during setup and clearing, and by guests throughout each cover. The heavy gauge of the Ribbon range means the knives hold their shape and finish well under repeated dishwasher cycles, which is a practical consideration in any busy operation where cutlery goes through the wash multiple times daily.

Selling in packs of six makes it straightforward to top up existing stocks or build a set incrementally. A few practical points worth noting:

• Mirror polish finish presents well on the table but may show watermarks more readily than a satin finish — thorough drying after washing is worthwhile
• 18/10 stainless steel offers good corrosion resistance in commercial dishwasher environments
• Matching pieces are available within the Ribbon range to complete a cohesive table cover

This knife is well suited to mid-range to higher-end dining operations where presentation matters and durability under daily service is equally important. It would be less well matched to very high-turnover, canteen-style environments where a simpler, lower-cost pattern might be more appropriate. If you're building out a full cover or matching to existing Ribbon pieces, it's worth speaking to us to make sure the full range is available to suit your volume and timeline.

The Elia Ribbon coffee spoon is a heavy-gauge 18/10 stainless steel spoon finished to a high mirror polish. The handle carries a subtle ribbon-inspired detail that gives the range a consistent, considered aesthetic without being overly decorative. Each spoon is well balanced in the hand, which matters more than it might seem when staff are handling cutlery repeatedly across a full service.

In practice, 18/10 stainless steel at a heavier gauge holds its finish longer under commercial washing conditions than lighter-gauge alternatives. The mirror polish remains presentable through repeated dishwasher cycles, which reduces the time staff spend inspecting and buffing cutlery before service. For coffee covers specifically, where the spoon is one of the few pieces on the saucer, presentation consistency matters.

• Sold in a 12-pack — practical quantity for topping up existing sets
• Heavy gauge reduces the likelihood of distortion or lightweight feel in service
• Mirror finish suits formal and smart-casual dining environments equally
• Part of the wider Ribbon collection, so matching pieces are available across the range

The Ribbon range is well suited to restaurants, hotels, café-bars, and any operation where coffee service is a regular part of the offer. It sits comfortably in mid-to-upper market table settings. Operations running very high-volume informal café service may find a simpler, lighter pattern more practical for stock rotation at scale.

If you're building out a full Ribbon table setting or need guidance on quantities for your covers, the team are happy to help you work it through.

The Elia Ribbon teaspoon is a heavy-gauge 18/10 stainless steel teaspoon with a mirror-polished finish and a shaped handle featuring subtle ribbon-inspired detailing. It is sold in packs of twelve, making it a practical purchasing unit for operators setting up or restocking a dining room.

In day-to-day service, the heavier gauge makes a noticeable difference — the spoon sits well in the hand and does not feel insubstantial on a formally laid cover. The mirror finish holds up well through repeated commercial dishwasher cycles, and the 18/10 stainless steel composition offers good resistance to staining and corrosion over time. For operations running multiple sittings, that durability matters more than it might first appear.

From an operational standpoint, the Ribbon teaspoon suits environments where table presentation is taken seriously but where longevity and ease of maintenance are equally important considerations:

• Heavy-gauge construction reduces the likelihood of bending or distortion in busy kitchens
• Mirror polish presents well on formal and informal covers alike
• 18/10 steel resists staining through repeated dishwasher use
• Sold in twelves, aligning with standard cover counts and storage organisation
• Part of a wider Ribbon collection, allowing a consistent pattern across the table

There are no installation considerations for flatware, but it is worth confirming pack quantities against your actual cover count before ordering — running short mid-service is a common and easily avoided problem. The Ribbon range is available across multiple cutlery pieces, so building a complete matched setting is straightforward.

This teaspoon is well suited to restaurants, hotels, private members clubs, and catered event operations where a polished but unfussy table is the aim. If you are outfitting a larger site or need guidance on quantities across the full Ribbon collection, we are happy to help work through the numbers.

The Elia Ribbon table knife is a hollow handle knife finished in 18/10 stainless steel with a high-mirror polish. The handle carries a subtle ribbon-inspired profile that gives the range a distinct, considered appearance without veering into ornate territory — a balance that works well in formal dining and quality casual settings alike.

In service, hollow handle knives are valued for the way the weight distributes along the hand rather than concentrating at the blade end. This tends to be more comfortable for diners over the course of a full meal, which is worth considering when specifying cutlery for a tasting menu or extended dining format. The 18/10 steel grade offers good corrosion resistance and holds its polish well through commercial dishwasher cycles, though as with all hollow handle pieces, it is worth ensuring your dishwasher programme avoids prolonged high-temperature drying cycles, which can stress the join over time.

• Suited to formal restaurants, boutique hotels, and event catering operations
• Mirror polish presents well on white linen and contemporary table settings
• 18/10 grade resists staining and maintains appearance through regular commercial washing
• Sold in a 12-pack — practical for covering a standard section without over-ordering
• Matching pieces available within the Ribbon collection for a coordinated cover

This knife is well suited to operations that want a refined table setting without the weight and cost of solid handle cutlery. If your covers are high-volume and cutlery handling is fast and repeated, it is worth discussing hollow versus solid handle options with us before committing to a full order.

If you are building out a full Ribbon cover or have questions about quantities for your service, we are happy to talk it through.

The Elia Ribbon table fork is a heavy-gauge 18/10 stainless steel fork with a mirror-polished finish and a gently shaped handle featuring subtle ribbon-inspired detailing. It sits within a cohesive flatware range that includes matching fish cutlery and a choice of solid or hollow handle knives, making it straightforward to build a consistent place setting across a dining room.

In a professional dining environment, the weight and balance of the cutlery in a guest's hand matters. The Ribbon fork is produced to a heavier gauge than economy alternatives, which gives it a solid, considered feel without being unwieldy. The mirror finish holds well under regular commercial dishwasher cycles, and 18/10 stainless steel provides good resistance to staining and corrosion over extended service life.

• Suitable for restaurants, hotels, private dining rooms, and event catering
• Consistent finish across the Ribbon range aids uniform table presentation
• Heavy gauge construction supports everyday commercial use
• Mirror polish responds well to standard commercial warewashing
• Available in matching pieces to complete the full place setting

Supplied in packs of 12, the Ribbon fork is well suited to operations building or replenishing stock gradually, or topping up an existing Ribbon collection. It is worth considering your anticipated cover count and breakage rate when deciding on quantity — for larger dining rooms or high-turnover venues, ordering in greater volume from the outset typically works out more practical.

If you are specifying flatware across multiple covers or coordinating a full table setting, we are happy to talk through what quantities and pieces make sense for your operation.

The Elia Ribbon soup spoons are part of a coordinated flatware collection designed for professional dining environments. Made from 18/10 stainless steel in a heavy gauge, they carry a mirror-polished finish and a shaped handle with the subtle ribbon detailing that defines the range. Each pack contains twelve spoons, making them a practical purchasing unit for restaurants, hotels, and private dining operations.

In everyday service, heavy-gauge cutlery holds up better than lighter alternatives — it resists bending under repeated use, retains its finish through commercial dishwashing cycles, and feels well-balanced in the hand rather than flimsy. The Ribbon pattern occupies a middle ground between understated and decorative, which tends to work well across a range of dining styles without looking out of place.

• Heavy-gauge construction handles the demands of high-frequency commercial use
• Mirror-polished finish presents well on the table and withstands regular machine washing
• 18/10 stainless steel provides good corrosion resistance over long-term use
• Twelve-piece pack suits batch purchasing for covers-based restocking
• Part of a wider Ribbon collection, so matching pieces are available across the range

It is worth confirming that your dishwasher detergent and rinse-aid settings are appropriate for polished stainless steel — aggressive chemistry or incorrect dosing is a common cause of surface marking on mirror-finished cutlery, regardless of the brand.

The Ribbon range is well suited to restaurants, hotel dining rooms, and event caterers looking for a consistent, presentable flatware pattern. If you are equipping a larger operation or need to match an existing table setting, it is worth having a conversation with us about pack quantities and available pieces within the collection.

The Elia Ribbon dessert spoon is a polished flatware piece from Elia's Ribbon collection, made from 18/10 stainless steel with a mirror finish and a shaped handle that carries a subtle ribbon-inspired detail along its length. It is a practical, well-proportioned piece designed for use in professional dining environments where presentation and durability both matter.

Heavy-gauge 18/10 stainless steel holds up well through repeated commercial dishwashing cycles without losing its finish or shape. The higher nickel content in 18/10 steel gives improved corrosion resistance compared with lower-grade alloys, which translates to a longer working life in environments where cutlery is turned around several times a day. The mirror polish maintains its appearance with normal machine washing, though prolonged exposure to harsh detergents or salt residue should be avoided, as with any polished flatware.

Key practical points for operators:

• 18/10 stainless steel construction resists corrosion through heavy daily use
• Mirror polish presents well on formal and smart-casual covers alike
• Heavy gauge gives a balanced, comfortable feel that reads as quality to guests
• Sold in a 12-pack, practical for building or supplementing existing covers
• Ribbon range includes matching pieces to complete a cohesive table setting

As with any flatware purchase for a busy operation, it is worth considering total cover count, likely loss rate, and how the style sits alongside your existing table dressing before committing to a quantity. The Ribbon range is available across multiple piece types, so building a matched set is straightforward. If you are equipping a new opening or replacing a full cutlery range, it is worth thinking through quantities carefully to avoid over- or under-ordering.

This spoon suits restaurants, hotels, and event caterers where a refined but unfussy flatware style is appropriate. It works across formal dining and smart-casual settings without feeling out of place in either. If you need a more entry-level option for high-turnover or outdoor catering, or a heavier prestige piece for a premium cover, there are other options in the wider catalogue worth considering.

If you are unsure how the Ribbon range fits your existing table setup or how many packs to order for your cover count, the team is happy to help you work it through.

The Elia Ribbon dessert knife is a hollow handle design in 18/10 stainless steel, finished to a high mirror polish. The handle profile takes its character from a subtle ribbon-inspired form that gives the piece a refined appearance without veering into overly ornate territory — a balance that tends to work well across a range of dining styles, from contemporary restaurant covers to more traditional hotel settings.

In a professional dining environment, cutlery takes considerable handling, repeated commercial dishwashing, and the general wear of continuous service. The 18/10 stainless steel construction is a standard specification for this reason — it resists corrosion and retains its finish through regular use. The hollow handle construction gives the knife a well-weighted, comfortable feel in the hand, which matters when guests are using it through a full dessert course.

Practical considerations worth noting for operators:

• 18/10 stainless steel holds up well to commercial dishwasher cycles
• Mirror polish finish is straightforward to keep presentable with proper drying
• Hollow handle design provides comfortable balance for the end user
• Sold as a 12-pack, practical for initial stock or topping up existing covers
• Coordinates with other pieces in the Elia Ribbon collection for a consistent table presentation

This pack of 12 is suited to smaller operations or as a supplement to an existing Ribbon collection. Larger venues covering multiple dining rooms or running high-turnover covers may want to consider ordering across several packs to maintain adequate rotation and allow for breakage allowance over time.

If you're building out a full table setting or want to confirm how the Ribbon range fits alongside your existing service ware, the team is happy to help you work through what you need.

The Elia Ribbon dessert fork is part of a coordinated flatware range designed for professional dining environments. Made from 18/10 stainless steel with a mirror-polished finish, each fork features a shaped handle with subtle ribbon-inspired detailing that gives the range a considered, consistent look across a table setting.

In a busy restaurant or hotel environment, flatware takes considerable daily punishment — repeated washing cycles, stacking, and handling. The heavy gauge used in the Ribbon range helps the pieces hold their shape and finish over time, reducing replacement frequency compared with lighter commercial cutlery. The mirror polish is resistant to everyday water marks and maintains its appearance well when run through a commercial glasswasher or dishwasher on a regular cycle.

Operationally, a few points are worth noting:

• 18/10 stainless steel offers reliable corrosion resistance in commercial wash environments
• Heavy gauge construction gives a balanced, substantial feel that sits well with quality tableware
• Mirror polish presents well in formal and semi-formal dining settings
• Sold in packs of 12, suited to building or supplementing covers in stages
• Matching pieces available across the Ribbon range for a unified table setting

The Ribbon range is well suited to restaurants, hotel dining rooms, private members' clubs, and event catering operations where presentation at the table matters. It sits comfortably in the mid-to-upper tier of commercial flatware — not an entry-level piece, but not positioned at the very top of the market either. Operations running very high covers with aggressive turnaround times may want to consider a heavier-duty or more utilitarian pattern that tolerates bulk washing more economically.

If you're building out a full table setting or replacing part of an existing range, it's worth talking through which pieces you need and in what quantities — we're happy to help work that out before you order.