Food Processor Julienne, Dicing and Chipping Discs

This cutting disc is designed for use with the Buffalo continuous feed vegetable preparation machine, producing 8x8mm chip cuts suited to french fries and similar potato or root vegetable preparations. It fits directly into the machine's disc housing and is swapped out as needed when different cuts are required during prep sessions.

In a working kitchen, the value of a dedicated chipping disc is straightforward: consistent cut dimensions across a full batch, with no variation between the first portion and the last. An 8x8mm cut is a practical standard for catering-grade fries — thick enough to hold up during frying without breaking down, and sized to cook evenly across a batch. For kitchens processing significant volumes of fresh-cut chips, this kind of consistency is difficult to achieve reliably by hand and much faster to achieve through a motorised prep machine.

A few practical points worth considering before ordering:

• Compatibility is limited to the Buffalo continuous veg prep machine — confirm your existing machine model before purchasing
• Discs are precision-formed components; inspect regularly for blade wear if processing large volumes of hard root vegetables
• Correct disc seating is important for clean cuts — refer to the machine manual for disc fitting guidance
• Replacement discs allow a single machine to cover multiple cut profiles, which is useful where kitchen menus vary

This disc is well suited to pubs, casual dining kitchens, and fast food operations where fresh-cut chips are a menu staple and prep volume justifies mechanised processing. It is a single-purpose accessory rather than a standalone piece of equipment, and its usefulness depends entirely on how well it matches your existing machine setup.

If you are unsure whether this disc is compatible with your current veg prep machine, or if you are considering building out a fuller set of cutting profiles, we are happy to help you work through the options.

This is the 3x3mm julienne cutting disc produced by Waring for use with the WFP7K commercial food processor. It fits directly into the existing machine and produces a fine, uniform julienne cut — long, thin strips of consistent cross-section commonly used in salad preparation, garnishes, coleslaw, and stir-fry vegetable prep.

In a working kitchen, having the correct disc for the task means the food processor earns its place on the prep bench rather than sitting idle between tasks. A julienne cut of this size is versatile enough to cover a range of applications without needing further knife work, which helps keep prep times predictable during busy service periods.

Extending your disc range around the WFP7K is a straightforward way to increase what the machine can produce without additional equipment investment. Key practical points worth noting:

• Produces a fine 3x3mm julienne strip suitable for a range of vegetable types
• Designed specifically for the Waring WFP7K — not a universal fit
• Interchangeable with other compatible Waring discs on the same machine
• Consistent cut size reduces the need for secondary knife tidying
• Stainless construction typical of commercial-grade food processor accessories

This disc is suited to operations already running the WFP7K that want to expand their prep capability without purchasing a second machine. It is worth confirming compatibility with your specific model before ordering, particularly if your WFP7K is an older unit.

If you are unsure which discs are compatible with your current setup, or if you are considering building out a fuller disc collection, the team is happy to help you identify the right combination for your prep requirements.

This Buffalo cutting disc is designed to produce 10x10mm French fry cuts and is compatible with the Buffalo continuous veg prep machine. It fits directly into the machine's disc carrier and allows operators to switch between cut styles without tools or lengthy changeovers, making it a practical addition where multiple prep tasks are carried out in sequence.

In a busy kitchen environment, consistent cut size matters — both for portion control and for even cooking. A 10x10mm chip is a standard size for deep-fried potato products, and using a dedicated cutting disc rather than hand-cutting delivers uniformity at volume with considerably less labour. For sites producing large quantities of chips from scratch, this kind of prep efficiency makes a real difference during busy prep sessions.

• Produces uniform 10x10mm chip cuts suitable for deep frying
• Designed for use with the Buffalo continuous veg prep machine
• Quick-change disc system reduces downtime between prep tasks
• Consistent output reduces waste and improves portion control
• Replaces time-consuming hand-cutting for high-volume chip prep

It is worth confirming compatibility with your specific machine model before ordering, as Buffalo produces several veg prep units and disc fitment can vary between them. If you are unsure which disc suits your machine, or whether a continuous feed machine is the right choice for your prep volumes, the team is happy to help you work through it.

This is a genuine Buffalo replacement julienne disc, cut to a 6x6mm profile, designed for use with the Buffalo veg prep attachment. It produces the uniform julienne strips commonly required for garnishes, stir-fry prep, coleslaw, and similar high-volume vegetable preparation tasks in commercial kitchens.

In a busy prep environment, consistent cut size matters — both for presentation and for even cooking times. A properly maintained, correctly fitted disc keeps output uniform across large batches, which matters when the same prep is being used across multiple dishes during a full service period.

Using a genuine replacement disc rather than a non-OEM alternative helps maintain the close tolerances the machine was designed around. Worn or poorly fitting discs can affect cut quality and place unnecessary strain on the motor housing over time.

• Produces consistent 6x6mm julienne strips suitable for volume prep
• Genuine Buffalo part — designed to fit and perform as original equipment
• Practical for garnishes, stir-fry, coleslaw, and similar prep tasks
• Straightforward to swap when replacing a worn or damaged disc

This disc is compatible with the Buffalo veg prep attachment (DN630). If you are unsure whether this disc fits your current machine configuration, or if you need guidance on which discs suit your prep volume and menu requirements, the team is happy to help before you order.

This is the replacement 4x4mm julienne disc for the Buffalo CH423 multi-purpose vegetable preparation machine. It is a direct-fit accessory designed to produce uniform julienne cuts from a range of vegetables, and is the correct disc to specify when the original has worn or when an additional disc is needed to extend the machine's versatility.

In a working kitchen, consistent cut size matters. A 4x4mm julienne is a widely used size for garnishes, stir-fry prep, coleslaw, and vegetable sides where presentation and even cooking are both important. Using the correct manufacturer-matched disc helps maintain the cut accuracy and throughput the CH423 is built to deliver, rather than relying on a generic alternative that may not seat or feed correctly.

• Designed specifically for the Buffalo CH423 veg prep machine
• Produces a clean, consistent 4x4mm julienne cut
• Suitable for a broad range of root and soft vegetables
• Straightforward to fit and remove for cleaning or changeover
• Keeps prep output uniform across a full service shift

It is worth confirming the disc is compatible with your specific machine before ordering, particularly if your CH423 is an older unit. If you are unsure which disc suits the prep tasks in your kitchen, or whether a different cut size would serve you better, the team is happy to advise.

This is the replacement 8x8mm French fries cutting disc designed specifically for the Buffalo CH423 multi-purpose vegetable preparation machine. It produces the standard straight-cut chip portion used across most pub kitchens, casual dining sites, and fast food operations where a consistent 8x8mm cut is the everyday requirement.

In practice, keeping a spare disc on hand avoids unnecessary downtime if a blade becomes blunted or damaged mid-service. The disc fits directly into the CH423 without modification, so changeover is straightforward and does not require any specialist tooling.

• Produces a consistent 8x8mm chip cut suitable for standard frying operations
• Direct replacement part — fits the Buffalo CH423 without adaptation
• Helps maintain prep throughput when a working disc is damaged or worn
• Useful as a spare for sites running high volumes of fresh chip preparation

It is worth noting that this disc is compatible with the CH423 only. If you are running a different Buffalo veg prep model, it is worth confirming compatibility before ordering. The disc itself is a wear item — how quickly it dulls depends on prep volume and the density of produce being cut.

This disc suits any site already operating the CH423 that needs a direct like-for-like replacement or simply wants a spare to hand. If you are unsure whether this is the correct disc for your machine, or if you are looking at discs for a different cut size, we are happy to help you confirm the right part before you order.

This is a replacement dicing disc for the Buffalo multi-purpose vegetable preparation machine, producing a 20x20x20mm dice. It is a direct accessory part designed to restore or extend the cutting capability of the machine when the original disc becomes worn or damaged, or where a kitchen needs a spare to reduce downtime during busy service periods.

In a working kitchen, dicing discs take a fair amount of punishment. Regular use on root vegetables, courgettes, onions, and similar produce will eventually dull or damage the cutting grid, and having a replacement to hand avoids the machine sitting idle at a critical moment. A 20x20x20mm dice is a practical, all-round size — large enough for roasted vegetable dishes and stews, and commonly used in bulk prep for catering operations where consistent presentation across batches matters.

This disc is suited to any kitchen already running the compatible Buffalo veg prep machine that processes moderate to high volumes of fresh vegetables. If your prep volumes have grown significantly since the machine was first installed, it may be worth considering whether a higher-capacity machine with a broader range of disc options would serve the operation better — our team can advise on that.

If you are unsure whether this disc is compatible with your specific machine, or if you need guidance on which additional discs would be useful for your prep requirements, feel free to get in touch before ordering.

This is the replacement 8x8x8mm dicing disc for the Buffalo Multi-Purpose Veg Prep Machine (CH423). It fits directly into the machine and produces uniform 8mm square dice, suitable for a wide range of root vegetables, onions, courgettes, and similar produce commonly prepared in bulk during kitchen prep sessions.

In a working kitchen, consistent dice size matters — not just for presentation, but for even cooking times across large batch volumes. A worn or damaged disc will produce irregular cuts that affect both plating quality and cook consistency. Keeping a spare disc on hand avoids unnecessary downtime during prep.

• Produces clean, uniform 8mm dice for consistent cook times and presentation
• Designed as a direct replacement for the Buffalo CH423 veg prep machine
• Suitable for a broad range of firm vegetables commonly prepped in bulk
• Easy to swap out, keeping machine downtime to a minimum
• Helps maintain output quality when the existing disc shows signs of wear

It is worth checking the condition of your existing disc periodically. Blunted cutting edges are often the cause of ragged or inconsistent cuts rather than a fault with the machine itself. If your CH423 is producing uneven dice, the disc is usually the first thing to inspect and replace.

If you are unsure whether this disc is the right fit for your machine or want guidance on compatible accessories for your prep setup, the team is happy to help before you order.

This is a genuine Buffalo replacement julienne disc sized at 8x8mm, designed for use with the Buffalo veg prep attachment (DN630). It fits directly into the attachment and produces uniform julienne strips from a range of vegetables, making it a practical consumable for any kitchen running the compatible Buffalo food processor setup.

In a busy prep kitchen, consistent cut size matters — both for cooking times and for presentation. The 8x8mm julienne format is a widely used size for garnishes, stir-fry prep, salad components, and side dishes. Having a reliable spare or dedicated disc means prep teams can move through volume quickly without stopping to change between tasks.

As a replacement disc rather than standalone equipment, its value sits in keeping an existing machine productive. Discs do wear over time with heavy use, and a blunted disc produces ragged cuts and puts unnecessary strain on the motor drive. Keeping a spare on hand is straightforward forward planning for any kitchen that relies on this attachment regularly.

It is worth confirming compatibility before ordering — this disc is specified for the DN630 attachment. If you are unsure whether this disc suits your current Buffalo processor setup, or if you are looking at building out a fuller set of cutting discs, the team is happy to help you work through what you need.

The Dynamic CL3044 is a 4x4mm julienne disc designed for use with compatible Dynamic vegetable slicers. It produces fine, uniform julienne strips from a wide range of vegetables — carrots, courgettes, celeriac, beetroot and similar firm produce — making it a useful addition to any prep kitchen that regularly turns out garnishes, salads, or cooked vegetable dishes requiring consistent cut sizes.

In practice, the value of a julienne disc like this comes down to consistency and speed. Hand-cutting julienne to a uniform 4x4mm across a large batch is time-consuming and prone to variation. Running produce through a machine-fitted disc keeps cuts consistent regardless of who is on the prep section, which matters when presentation standards need to be maintained across a full service.

Being fully stainless steel, the disc is straightforward to clean and maintains its cutting edge well under regular use. It is worth noting that disc accessories are machine-specific — this disc is designed for Dynamic slicers, and compatibility should be confirmed before purchasing if you are running a different brand or model of vegetable slicer.

This disc suits operations with a regular julienne requirement: restaurant prep kitchens, contract caterers, hotel kitchens, and similar environments where consistent vegetable cuts are part of the daily routine. For sites with very high throughput or a need for multiple cut sizes, it is worth speaking to us about the wider range of Dynamic disc options available.

If you are unsure whether this disc is compatible with your existing machine, or want to discuss which cut sizes suit your menu, we are happy to help you work through the options.

The Waring WFP16S23 is a 6.5mm julienne cutting disc designed for use with compatible Waring commercial food processors. It produces uniform julienne strips in a single pass, making it a practical tool for any kitchen that regularly prepares vegetables, garnishes, or stir-fry prep in volume.

In a busy kitchen environment, consistent cut size matters — both for presentation and for even cooking times. A dedicated julienne disc removes the variability of hand-cutting and allows a single operator to work through large quantities of product quickly, freeing up skilled prep time for tasks that require it. The 6.5mm cut size is well suited to a wide range of applications, from classic julienne garnishes to vegetable sides and salad components.

• Produces consistent 6.5mm julienne strips across high volumes of product
• Reduces manual prep time and operator fatigue during busy prep periods
• Compatible with Waring WFP16S and WFP16SCD food processors
• Simple disc-swap design keeps changeover time between tasks minimal
• Easy to remove, clean, and store alongside other disc accessories

It is worth confirming compatibility before ordering — this disc is designed specifically for the Waring WFP16S and WFP16SCD models and will not fit other processor ranges. If your kitchen runs a different Waring model or a processor from another manufacturer, it is worth checking the correct disc reference before purchasing.

This disc is best suited to kitchens already operating one of the compatible Waring processors and looking to extend their prep capability without additional equipment. For sites with very high throughput demands, it may be worth considering whether a larger-capacity processor and disc combination would better suit the volume.

If you are unsure whether this disc is the right fit for your current setup, our team is happy to talk it through with you.

The Dynamic CL3042 is a stainless steel julienne disc designed for use with compatible Dynamic vegetable slicers. It produces a 4x2mm julienne cut — a fine, matchstick-style strip commonly used for garnishes, stir-fry prep, coleslaw bases, and similar vegetable preparation tasks where consistent cut size matters.

In a busy kitchen environment, interchangeable discs like this one allow a single machine to handle multiple cutting profiles across a service period. Swapping to a julienne disc for fine vegetable prep and back to a plain slicing disc for other tasks is straightforward, helping prep teams work through volume efficiently without inconsistency in the finished cut.

The all-stainless construction means the disc stands up to regular use and repeated cleaning cycles without deterioration. Consistent cut dimensions reduce the sorting and rework that can slow down prep, particularly when presentation standards need to be maintained across covers.

• Produces uniform 4x2mm julienne strips with each pass
• Stainless steel construction suits heavy regular use and commercial wash-down
• Interchangeable with other Dynamic discs to extend machine versatility
• Consistent output reduces prep rework and supports presentation standards

This disc is a direct replacement or additional cutting option for kitchens already running a compatible Dynamic vegetable slicer. It is worth confirming compatibility with your existing machine model before ordering, as disc fitment can vary across slicer ranges.

If you are unsure which disc size suits your prep requirements, or whether this disc is compatible with your current machine, the team is happy to help you check before you order.

This is the 6x6mm french fry cutting disc for the Waring WFP14SK and WFP14SCK commercial food processors. It fits directly into the feed head assembly and produces a uniform 6x6mm chip cut from whole potatoes and other root vegetables, making it a practical replacement or additional disc for kitchens that produce chips or fries as a regular menu item.

In a working kitchen environment, consistent cut size matters. Uniform 6x6mm cuts mean more even cooking times in the fryer, which supports consistent output during busy service periods and reduces the risk of unevenly cooked product reaching the pass. The disc is designed to handle volume throughput as part of the processor's standard cutting cycle.

This disc is suited to operators who already run a Waring WFP14SK or WFP14SCK food processor and need either a replacement disc or a dedicated spare for chip preparation. It is a like-for-like accessory rather than a universal fit — compatibility is limited to those specific processor models, so it is worth confirming your model reference before ordering.

If your operation processes very high volumes of potatoes daily, it may be worth discussing whether your current processor setup is correctly specified for that workload. Our team are happy to talk through what you need.

This julienne cutting disc is designed for use with Buffalo's continuous feed vegetable preparation machine, producing fine 2.5mm julienne strips from a range of vegetables. It fits directly into the machine's disc carrier and is interchangeable with other cutting discs in the compatible range, allowing kitchens to switch between cut styles without additional equipment.

In practice, julienne discs like this are most useful in kitchens where fine vegetable cuts appear regularly on the menu — stir-fry bases, garnishes, salads, and coleslaw-style sides all benefit from the consistency and speed that a powered prep machine delivers over hand-cutting. The continuous feed design means prep staff can work through bulk quantities steadily, which is particularly useful during morning prep shifts before service begins.

• Produces uniform 2.5mm julienne strips for consistent plating and portion control
• Interchangeable with other discs in the Buffalo compatible range for versatile prep
• Reduces repetitive hand-cutting, supporting faster and safer vegetable preparation
• Consistent cut size helps standardise cooking times across large batches
• Easy to swap between cuts mid-prep without significant downtime

As a disc accessory rather than a standalone machine, this item requires the compatible Buffalo continuous veg prep unit to function. It is worth confirming compatibility with your existing machine model before ordering, as disc ranges can vary across different Buffalo prep machine generations.

This disc suits kitchens that already own or are investing in a Buffalo continuous feed prep machine and need to expand their cutting capability. For sites with only occasional julienne requirements, a single multi-purpose disc kit may offer better value; for high-throughput operations running several cuts daily, building a fuller set of discs is worth considering.

If you're unsure which discs are compatible with your current machine, or you're specifying a prep machine and accessory set together, feel free to get in touch — we're happy to talk through what will work for your setup.

This 4mm julienne disc is a replacement and supplementary cutting attachment designed for use with the Buffalo continuous feed vegetable preparation machine. It produces uniform julienne cuts at 4mm, suitable for a range of vegetables commonly prepared in professional kitchen environments.

In a busy service kitchen, consistent cut size matters — both for presentation and for even cooking times. A dedicated julienne disc fitted to a continuous feed machine allows prep teams to work through significant volumes of vegetables quickly and repeatably, without the inconsistency that comes from manual knife work at speed.

The practical advantages of having the correct disc to hand include:

• Consistent 4mm julienne output across the full prep run
• Faster throughput compared to manual julienne preparation
• Reduced skill dependency for repetitive vegetable prep tasks
• Easy interchange with other compatible cutting discs on the same machine

This disc is compatible with the Buffalo continuous veg prep machine and should be selected to match that specific unit. If you are building out a set of cutting discs for a busy prep section, it is worth considering which cut profiles your menu requires most frequently and equipping accordingly — having the right disc available at the start of service avoids unnecessary delays.

This attachment is best suited to kitchens already operating the compatible Buffalo continuous feed veg prep machine. It is not a standalone piece of equipment. For sites processing very high volumes of a single cut type, it may be worth discussing whether additional discs or a higher-capacity machine configuration would better serve the operation.

If you are unsure whether this disc is compatible with your current machine or would like guidance on building a practical disc set for your prep requirements, we are happy to help.

This is a genuine Buffalo replacement julienne disc designed for use with the Buffalo veg prep attachment (DN630). It cuts vegetables into uniform 4x4mm julienne strips, making it a practical accessory for kitchens that regularly prepare garnishes, stir-fry vegetables, coleslaw bases, or other dishes that require consistent fine cuts.

In a working kitchen, consistency and speed during prep are important, and a dedicated julienne disc removes the variability that comes with hand-cutting. The disc fits directly into the compatible Buffalo veg prep unit and produces repeatable results across large volumes of produce, which is particularly useful when uniformity matters for presentation or cooking times.

Being a genuine Buffalo part, it is manufactured to fit and perform as the original equipment requires. Using non-genuine discs on commercial food prep equipment can affect cut quality and, in some cases, the longevity of the machine itself, so it is worth keeping a genuine replacement to hand.

This disc is suited to any operation already running the Buffalo DN630 veg prep attachment — from casual dining and pub kitchens through to hotel and contract catering environments where julienne cuts feature regularly on the menu. If your prep volumes are heavier or you require a wider range of cut sizes, it is worth considering whether a more comprehensive food processor setup would better serve your kitchen.

If you are unsure whether this disc is compatible with your existing equipment or you would like guidance on Buffalo food prep accessories more broadly, the team is happy to help you work through it.

These are genuine Buffalo replacement dicing discs designed for use with the vegetable preparation attachment on the Buffalo DN630 food processor. If the existing discs have become blunted or damaged through regular use, these are the correct like-for-like replacement to restore accurate, clean dicing performance.

In a busy prep kitchen, blunt or worn cutting discs produce uneven results — ragged edges, inconsistent cube sizes, and increased resistance that puts unnecessary strain on the machine. Replacing discs at the first sign of deterioration keeps prep output consistent and reduces the risk of produce bruising, which matters when presentation and portion uniformity are part of your standard.

As genuine Buffalo parts, these discs are made to the same tolerances as the originals, so fitting and cutting performance should be exactly as the machine was designed to deliver. Generic alternatives can vary in fit and blade geometry, which is worth bearing in mind when sourcing replacements for commercial equipment that runs daily.

These discs are straightforward to fit and suitable for kitchens already operating the DN630. They are a consumable item — how quickly they wear depends on the volume of produce processed and the density of the vegetables being cut. Root vegetables and firm produce will dull discs faster than softer ingredients.

If you are unsure whether these are the correct discs for your attachment configuration, or if you are looking at expanding your Buffalo food processor setup, the team is happy to help you identify the right parts before you order.

The Dynamic CL3055 is a 5x5mm julienne disc designed for use with compatible Dynamic vegetable slicers. It produces uniform julienne strips from a range of vegetables — carrots, courgettes, leeks, celeriac and similar firm produce — making it a practical addition to any kitchen that carries out regular vegetable preparation.

In a busy prep environment, consistent cut size matters. Uniform julienne strips cook evenly, plate predictably, and reduce the variability that comes with hand-cutting. For kitchens running high volumes of vegetable garnishes, salads, or stir-fry prep, fitting a dedicated julienne disc to the slicer keeps throughput steady without relying on individual knife skills.

• Full stainless steel construction for durability and hygiene compliance
• 5x5mm cut produces a standard julienne suitable for a wide range of dishes
• Compatible with Dynamic vegetable slicer models that accept the CL-series disc range
• Consistent output reduces prep time and improves plate consistency

Before ordering, it is worth confirming that this disc is compatible with your existing Dynamic machine. The CL-series discs are not universal across all Dynamic models, so checking your slicer's model reference against the disc compatibility list will avoid a wasted order. The disc itself requires no special installation — it fits to the slicer in the standard way — but the slicer will need to be correctly set up and secured before use, as with any rotating cutting attachment.

This disc suits kitchens that already operate a compatible Dynamic vegetable slicer and want to extend its capability for julienne work. If your volume of julienne prep is relatively low, a single disc covering the most common cut size will usually be sufficient. Higher-output operations processing a wider variety of cuts may benefit from holding a small selection of discs to cover different specifications.

If you are unsure whether this disc fits your machine, or want to discuss which disc sizes best suit your menu, the team is happy to help you work it out before you order.

This is the replacement 10x10mm French fries disc for the Buffalo CH423 multi-purpose vegetable preparation machine. It fits directly into the CH423 and is designed to produce uniform chip-sized cuts suitable for deep frying or other preparations where a consistent 10x10mm profile is required.

In a working kitchen, disc condition makes a meaningful difference to cut quality. A worn or damaged disc produces uneven pieces that cook at different rates, which affects both food quality and oil efficiency. Keeping a spare disc to hand means prep output stays consistent without downtime waiting for a replacement to arrive.

• Produces uniform 10x10mm cuts suitable for chips and similar preparations
• Designed as a direct replacement for the Buffalo CH423 veg prep machine
• Helps maintain consistent prep output when the original disc becomes worn
• Supports faster, more reliable prep during high-volume service periods

This disc is a machine-specific accessory and is compatible with the CH423 model only. If you are unsure whether this disc fits your current machine or need guidance on which disc profile suits your menu best, the team is happy to help before you order.

This dicing disc is a cutting attachment designed for use with the Buffalo continuous feed vegetable preparation machine. It produces a consistent 8x8mm dice cut, making it suited to kitchens where uniform portioning of root vegetables, courgettes, peppers, and similar produce is a regular part of prep work.

In a busy kitchen environment, consistent dice size matters — both for even cooking and for presentation. Running whole vegetables through a continuous feed machine fitted with this disc is considerably faster than hand-dicing, and reduces the variation that comes with manual knife work during high-volume prep sessions. The continuous feed design means staff can work through bulk quantities without stopping to reload, which helps maintain throughput during morning or afternoon prep shifts.

From a practical standpoint, the disc is straightforward to fit and remove, which keeps cleaning and changeover time to a minimum. Kitchens that prepare a variety of cuts throughout the day will find it worth having the relevant discs to hand rather than re-cutting by hand between tasks.

It is worth confirming compatibility before ordering — this disc is designed to fit the Buffalo continuous feed veg prep machine (G784). It will not be compatible with all veg prep machines as a matter of course, so if you are unsure whether it suits your existing unit, it is worth checking before purchasing.

If you are unsure which discs best suit your prep requirements, or need to discuss how a continuous feed machine fits into your workflow, the team is happy to help you work through it.

The Dynamic CL3088 is a stainless steel julienne disc producing an 8x8mm cut, designed for use with compatible Dynamic vegetable slicers. It replaces or supplements the standard disc set to allow consistent julienne preparation of vegetables such as carrots, courgettes, celeriac, and similar firm produce.

In a working kitchen, a correctly sized julienne disc makes a measurable difference to prep consistency. An 8x8mm cut is a practical, general-purpose julienne size — substantial enough to hold its shape through light cooking or dressing, and fine enough for garnish work or raw salad preparations. Where prep volumes are high, having a dedicated disc already fitted to a second bowl or kept clean and ready at the slicer reduces changeover time during a busy service.

• Produces a clean, consistent 8x8mm julienne cut across a full hopper load
• Full stainless steel construction handles repeated daily use and regular cleaning
• Designed as a direct fit for compatible Dynamic vegetable slicer models
• Suitable for a wide range of firm vegetables commonly prepped in commercial kitchens
• Straightforward to remove, clean, and refit between prep runs

As with any cutting disc, it is worth confirming compatibility with your specific Dynamic slicer model before ordering. Disc fittings can vary across the Dynamic range, and fitting an incompatible disc to a machine carries both safety and quality risks. If you are building out a set of discs for a vegetable slicer already in your kitchen, or sourcing a replacement, the team is happy to help confirm the right fit.

This dicing disc is a cutting attachment designed for use with the Buffalo continuous vegetable preparation machine. It produces a 10x10mm dice cut, making it suitable for preparing vegetables to a consistent size for soups, stews, sautés, and similar dishes where uniform presentation and even cooking matter.

In a busy kitchen environment, consistent dice sizing reduces the variation that comes with hand-cutting, which in turn helps with portion control and cooking times. For kitchens processing significant volumes of root vegetables, onions, or similar produce during prep periods, a reliable dicing disc takes repetitive knife work off the prep team and keeps output consistent across service.

• Produces a clean 10x10mm dice suitable for a wide range of standard preparations
• Reduces reliance on hand-cutting during high-volume prep
• Helps maintain consistency across batches when prep is shared between team members
• Quick to swap between other compatible discs on the same machine

This disc is designed specifically for the Buffalo continuous veg prep machine and will not fit other makes or models. It is worth confirming your machine model before ordering to avoid compatibility issues — the disc fits the Buffalo continuous feed unit rather than bowl-cutter style processors.

It is well suited to kitchens where vegetable prep volume justifies a dedicated machine, such as pub kitchens, contract caterers, and school or hospital catering operations. If your prep volumes are particularly high, it may be worth considering a higher-capacity machine altogether rather than relying solely on accessory discs to increase throughput.

If you are unsure whether this disc suits your current machine or want to discuss which cutting attachments best match your prep requirements, the team is happy to help.

This is a genuine Buffalo replacement julienne disc producing a 2x2mm cut, designed for use with the Buffalo veg prep attachment (DN630). It fits directly into the existing disc hub and is intended as a like-for-like replacement when a disc becomes worn or damaged, or as an additional disc to extend the cutting range of an existing machine.

In a busy kitchen, consistent julienne cuts are most commonly required for garnishes, stir-fry prep, salads, and fine vegetable sides. A worn or blunted disc produces ragged, uneven cuts that affect presentation and increase waste. Keeping a spare in good condition means prep output stays consistent without disrupting service.

• Produces a precise 2x2mm julienne cut suitable for fine garnishes and vegetable prep
• Genuine Buffalo part — designed to fit and perform as the original
• Replacement or additional disc for DN630 veg prep attachment
• Straightforward to swap between cuts mid-prep session
• Maintains cutting quality and reduces product waste versus a worn disc

It is worth confirming your existing machine model before ordering. This disc is specified for the DN630 attachment; Buffalo produces a range of veg prep machines and not all discs are cross-compatible. If you are unsure which disc fits your current setup, or whether a different cut size would better suit your menu, the team is happy to help you confirm the right part before you order.

The Waring WFP16S24 is an 8mm julienne disc designed for use with the Waring WFP16S and WFP16SCD commercial food processors. It fits directly into the processor's disc hub and produces uniform julienne strips in a single pass, replacing the repetitive knife work that slows prep teams down during busy service periods.

In a working kitchen environment, consistent cut size matters — both for presentation and for even cooking times. The 8mm julienne profile is a practical size for a wide range of applications, from vegetable garnishes and stir-fry prep to salads and coleslaw-style sides. Because the disc is driven by the processor motor rather than manual effort, output is consistent across the full batch, regardless of how far into a prep session you are.

• Produces uniform 8mm julienne strips for consistent portion presentation
• Replaces time-consuming hand-cutting during high-volume prep
• Compatible with Waring WFP16S and WFP16SCD food processors
• Reduces fatigue on prep staff during extended service preparation
• Easy to swap between other discs in the WFP16S accessory range

As with all processor discs, correct seating in the hub is important before operation. The disc should be cleaned promptly after use — residue left on the cutting edges will dull them over time and make cleaning harder. It is worth confirming the disc is genuinely compatible with your specific processor model before ordering, particularly if your machine has been in use for some time and you are unsure of the exact variant.

This disc is well suited to kitchens that already run a Waring WFP16S or WFP16SCD processor and want to extend its capability without additional equipment. If your prep volumes have grown significantly since your processor was purchased, it may be worth discussing whether the processor itself remains the right fit for your current operation.

If you are unsure whether this disc is the right match for your existing equipment, feel free to get in touch — it is the sort of quick question we are happy to help with before an order is placed.

The Dynamic CL3052 is a stainless steel julienne disc designed for use with compatible Dynamic vegetable slicers. It produces a 5x2mm julienne cut — a fine matchstick-style strip commonly used for garnishes, stir-fry preparation, coleslaw, and similar high-volume vegetable prep tasks.

In a working kitchen, consistency of cut matters. A well-maintained julienne disc produces uniform strips that cook evenly and present cleanly on the plate, which is particularly relevant in operations where vegetable prep volume is high and presentation standards are consistent across covers. The disc is straightforward to fit and remove, which keeps changeover time low when switching between cut profiles during prep shifts.

As an accessory rather than a standalone piece of equipment, the practical value here lies in extending the capability of an existing Dynamic slicer without requiring a separate machine. Key points worth noting:

• Full stainless steel construction for durability and hygiene compliance
• 5x2mm cut profile suitable for fine julienne and matchstick applications
• Designed specifically for Dynamic vegetable slicer compatibility
• Easy disc changeover supports multi-cut prep workflows

Before ordering, confirm compatibility with your specific Dynamic slicer model. Disc fittings can vary across the Dynamic range, and fitting an incompatible disc risks poor cut quality and potential damage to the machine. If you are unsure which disc suits your machine, we are happy to help you confirm the right fit before you order.

This is the replacement 3x3mm julienne disc for the Buffalo Multi-Purpose Veg Prep Machine. It fits directly into the machine and produces fine julienne strips — the kind of consistent, uniform cut that matters when presentation and cooking times need to be predictable across a full service.

Julienne discs take a fair amount of wear in busy kitchen environments, particularly where prep volumes are high or harder vegetables such as carrots and celeriac are processed regularly. Having a spare or replacement disc to hand means a worn or damaged disc doesn't interrupt prep workflow at a critical point in the day.

This disc is suited to any operation already running the compatible Buffalo veg prep machine that wants to restore or maintain julienne cutting capability. It is a like-for-like replacement rather than an upgrade, so if your current output is meeting service demand, this will return the machine to its original performance.

If you are unsure whether this disc is the correct fit for your machine, or if you are considering which veg prep accessories best suit your prep volumes and menu requirements, the team is happy to help you confirm compatibility before you order.

The Dynamic CL3032 is a stainless steel julienne disc designed to fit compatible Dynamic vegetable slicers. It produces a fine 3x2mm julienne cut, commonly used for preparing matchstick vegetables, garnishes, stir-fry bases, and fine vegetable strips for salads or hot dishes.

In a working kitchen environment, interchangeable discs like this one are what make a vegetable slicer genuinely versatile. Rather than hand-cutting julienne strips — a time-consuming task that varies in consistency depending on who is doing it — the disc allows prep teams to process volume quickly and uniformly. The 3x2mm cut size is a fine julienne suitable for delicate garnishes as well as bulk vegetable prep where presentation matters.

Being fully stainless steel construction, the disc is robust enough for regular commercial use and straightforward to clean in line with kitchen hygiene requirements. Correct storage between uses will help maintain the blade edges and extend the working life of the disc.

This disc is an accessory item and requires a compatible Dynamic vegetable slicer to function. Before purchasing, confirm that this disc model is listed as compatible with your existing machine — Dynamic produce discs across several slicer ranges and not all discs are interchangeable between models. If you are unsure which disc suits your machine, it is worth checking before ordering.

If you have any questions about compatibility with your current equipment, we are happy to help you confirm the right disc before you commit to a purchase.

This is the genuine replacement 14x14x14mm dicing disc for the Buffalo Multi-Purpose Veg Prep Machine (CH423). It slots into the machine to produce uniform 14mm dice from a range of root vegetables, firm salad vegetables, and similar produce — a common cut for soups, stews, garnishes, and mise en place preparation in busy kitchens.

Keeping a spare dicing disc to hand is sensible practice in any kitchen that relies on the CH423 for daily prep. Discs are consumable items that can blunt or sustain damage over time, particularly under heavy use, and having a replacement available avoids unnecessary downtime during service preparation.

The 14x14x14mm cut is a practical, versatile size that suits a broad range of menu applications. If your kitchen regularly requires finer or coarser dice, Buffalo produce a range of alternative disc sizes for the same machine — worth considering if your prep requirements vary across different service periods or menu changes.

If you are unsure whether this disc is compatible with your existing machine, or if you need guidance on the full range of available disc sizes for the CH423, feel free to get in touch with the team before ordering.

The Robot Coupe 27114W is a genuine dicing attachment designed exclusively for the R402 and R402 VV bowl cutters. It includes the dicing grid and associated components required to switch the machine from its standard cutting function to precision dicing, producing clean, uniform 10 x 10 x 10mm dice without the need for a separate piece of equipment.

In a working kitchen, consistent dice size has a direct bearing on cooking results and presentation. Achieving that consistency by hand at any meaningful volume is slow and unreliable. Fitted to the R402, this kit allows prep teams to work through vegetables, fruit, and similar produce efficiently during bulk prep ahead of service. The uniformity of output is equally suited to plated dishes where appearance matters and to high-volume catering where throughput is the primary concern.

• Produces clean, uniform 10 x 10 x 10mm dice for consistent cooking and presentation
• Converts the R402 to a dicing function without additional equipment
• Reduces manual prep time on high-volume vegetable and produce work
• Genuine Robot Coupe accessory, engineered to fit and perform correctly with the R402
• Straightforward to fit and remove when switching between cutting attachments

Compatibility is specific — this kit is designed for the R402 and R402 VV only and will not fit other models in the Robot Coupe range. It is worth confirming your exact machine model before ordering, particularly if you are purchasing the R402 and this kit at the same time.

This kit is well suited to professional kitchens already running an R402 that want to extend the machine's capability into dicing. For operations where dicing is a primary daily task at very high volume, it may be worth discussing whether a larger-capacity processor with a dedicated dicing function would better serve your throughput requirements.

If you would like to confirm compatibility with your current machine or talk through which Robot Coupe accessories best fit your prep workflow, the team is happy to help.

The Robot Coupe 27113 is a purpose-made dicing kit designed exclusively for the R402 and R402 VV continuous-feed food processors. It converts the machine to produce uniform 8x8x8mm dice and includes the dicing grid and all associated components required — no modification or adaptation needed. As a genuine Robot Coupe accessory, it is engineered to fit those two models precisely.

In a prep kitchen, cut consistency has a direct operational value. Even dice means predictable cooking times, a cleaner finish on the plate, and more reliable portion presentation across covers. Running vegetables through the R402 with this kit produces repeatable results at volume, which matters most during high-output prep shifts when both speed and uniformity are under pressure. The 8mm cube is a well-established size across a broad range of applications — soups, stews, salads, sauces, and garnishes all benefit from a clean, regular cut at this dimension.

From a practical standpoint, the main operational advantages are:

• Consistent 8x8x8mm dice across large prep volumes without hand-cutting
• Faster throughput, freeing brigade time from repetitive knife work
• Straightforward to swap in and out when alternating between cutting functions
• Genuine fit for the R402 — no adjustment or workaround required
• Redirects skilled knife time to tasks that benefit more from it

Compatibility is the critical point to confirm before ordering. This kit is designed exclusively for the R402 and R402 VV and will not fit other processors in the Robot Coupe range. If there is any uncertainty about the model, checking the machine's serial plate before purchasing is worth the minute it takes.

If your kitchen dices at particularly high volume, or you need to produce a range of dice sizes across different prep tasks, it may be worth discussing whether a broader accessory set or a different processor configuration would serve you better. We are happy to talk through your prep requirements.