Covers and Accessories

This Bolero outdoor cover is designed to protect a stack of up to six armchairs when left outside between service periods or during seasonal closure. Made from heavy-duty weather-resistant polyester, it resists UV fading and repels rain and moisture, helping chairs stay clean and presentable without requiring constant attention from front-of-house staff.

The drawstring closure keeps the cover seated firmly on the stack, which matters in exposed outdoor settings where wind can dislodge a loosely fitted cover. When the furniture is back in use, the cover folds down into a compact carry case for tidy storage.

Practically speaking, a cover like this reduces the frequency with which outdoor chairs need wiping down or drying off before a service, and extends the usable life of the furniture by limiting prolonged exposure to the elements. It is a straightforward addition to any venue that leaves chairs stacked outside overnight or through the off-season.

• Protects stacked chairs from rain, moisture, and UV exposure
• Drawstring closure holds the cover in place in windy conditions
• Folds into an included carry case for compact storage
• Reduces pre-service cleaning time for outdoor furniture
• Suited to restaurants, cafés, pubs, and hospitality venues with outdoor seating

If you are covering a larger stack or a different chair configuration, it is worth checking the dimensions against your specific stack height before ordering. The team is happy to help if you are unsure which size or cover type suits your setup.

This outdoor cover from Bolero is designed to protect a stacked set of up to eight side chairs when stored outside or in an exposed area. Made from a heavy-duty weather-resistant polyester, it offers straightforward, reliable protection against rain, moisture, and prolonged sun exposure without the need for any fixings or tools.

For hospitality operators who move chairs between indoor and outdoor use — or store them outdoors between service periods — a purpose-made cover like this reduces the maintenance burden and helps keep chairs in usable condition for longer. Rather than bringing chairs inside after every service, a well-fitted cover allows them to remain stacked outside safely, which suits many pub gardens, café terraces, and event venues where indoor storage space is limited.

• Weather-resistant polyester construction handles rain, wind, and UV exposure
• Drawstring closure keeps the cover secure in windy conditions
• Folds into an included carry case for compact, tidy storage when not needed
• Sized to fit up to eight stacked side chairs in a compact footprint
• Reduces cleaning time by keeping stacked chairs dry and debris-free

The cover fits a stack footprint of 700x700mm, so it is worth confirming this against your specific chair stack dimensions before ordering. Chair stacks can vary in width depending on the chair profile, so if your stack is wider or taller than standard, it is worth checking compatibility. Bolero offer covers in other configurations where a different size or style is needed.

If you are unsure which cover suits your chairs or seating arrangement, the team is happy to help you match the right product before you order.

This Bolero rectangular cover is designed to protect a complete outdoor dining set — table and chairs together — under a single weatherproof sheet. It is a straightforward, practical solution for hospitality operators who need to keep outdoor furniture in serviceable condition between uses, whether that is overnight, through a quiet midweek period, or over an extended seasonal closure.

The cover is made from a weather-resistant polyester with UV protection and water-repellent properties, which helps prevent the gradual fading, surface damage, and moisture ingress that shortens the life of outdoor furniture. Breathable construction reduces moisture build-up underneath, lowering the risk of mildew forming on cushions or frame surfaces during prolonged storage. Reinforced seams add durability at the stress points most likely to fail in windy conditions, and an adjustable fit helps keep the cover in place without needing to weight it down.

• Covers table and chairs together, reducing the number of individual covers needed
• UV-resistant fabric helps prevent fading on both cover and furniture beneath
• Breathable material reduces condensation and mildew risk during storage
• Reinforced seams resist tearing at high-stress points in exposed conditions
• Folds into a carry case for compact storage when not in use

This size is suited to larger rectangular dining sets typically found on pub terraces, restaurant patios, and event spaces. It is worth measuring your set carefully before ordering — including any chair overhang — to confirm the cover will sit correctly. For smaller sets, a reduced-size option may give a neater, more secure fit.

If you are equipping a larger outdoor area and are unsure which cover sizes to order across your furniture range, the team is happy to help you work through the options.

This Bolero outdoor table cover is a straightforward, practical solution for protecting rectangular outdoor furniture during periods when tables are not in use. Made from weather-resistant polyester with built-in UV protection, it is designed to shield table surfaces from rain, sun exposure, dust, and general outdoor debris.

For operators running outdoor dining areas — whether a pub beer garden, restaurant terrace, or café patio — furniture protection between services or over the off-season is a practical necessity. Leaving tables exposed to prolonged wet weather or UV over time accelerates fading, warping, and surface degradation. A cover extends the working life of outdoor furniture and reduces the frequency of deep cleaning before each service period.

• Protects against rain, UV exposure, dust, and surface debris
• Adjustable fit for a secure, tidy appearance on standard rectangular tables
• Folds down compactly and stores in the included carry case
• Black finish suits most outdoor furniture and hospitality settings

At 2000x1000mm, this cover is sized for larger rectangular dining tables commonly used in commercial outdoor settings. It is worth measuring your tables before ordering, as cover fit matters — a cover that is too large will lift in wind, and one that is too small will leave edges exposed. If your tables fall outside this footprint, Bolero and similar suppliers offer covers in a range of sizes.

This is a practical accessory suited to any operator with outdoor furniture to maintain. If you are unsure which size or style suits your setup, the team is happy to help you work it out.

The Bolero folding chair trolley is a straightforward handling aid designed to move and store folding chairs in hospitality, events, and catering environments. Rather than carrying chairs individually or stacking them awkwardly, the trolley holds up to ten folding chairs in a single load, keeping the process orderly and reducing the physical strain on staff during setup and breakdown.

In practice, this kind of trolley earns its place quickly in any venue that regularly reconfigures its space — function rooms, banqueting halls, conference facilities, and restaurants with flexible layouts. Moving chairs between storage and a dining area is one of those tasks that adds up over a long shift, and having a purpose-built trolley cuts that time noticeably.

• Powder-coated steel frame built for repeated daily use
• Carries up to ten folding chairs per load
• Four rubber wheels for smooth movement across varied floor surfaces
• Two braked wheels to hold the trolley steady during loading and unloading
• Straightforward to load and clear without lifting chairs awkwardly

The trolley also doubles as a storage solution when chairs are not in use, keeping them upright, contained, and out of the way rather than leaned against walls or stacked unsafely on the floor.

It is best suited to venues operating standard Bolero or comparable folding chairs. It is worth confirming chair compatibility before ordering, as trolley sizing is matched to specific chair profiles. For sites managing significantly larger chair counts, a second trolley or a higher-capacity alternative may be worth considering.

If you are unsure whether this trolley is compatible with your existing chairs, or you need advice on managing larger quantities, the team is happy to help you work it out before you order.

Wobbly tables are a persistent nuisance in busy hospitality environments — disruptive for guests, a spillage risk during service, and a source of ongoing complaints that front-of-house staff have to manage on the fly. The Beaumont Stabilizer Table Wedge is a straightforward solution: a small plastic wedge that sits under a table leg to level it against uneven flooring, removing the wobble without tools or adjustment to the table itself.

The wedge features a textured grip surface on both faces, which helps it hold its position against the table leg and the floor rather than sliding out under normal use. It is compact enough to sit discreetly under a table leg without being a trip hazard or creating an uneven feel underfoot.

Practical advantages for front-of-house operations include:

• Removes table wobble quickly without interrupting service or adjusting furniture
• Textured grip on both surfaces reduces the chance of the wedge shifting
• Compact profile sits discreetly beneath the table leg
• No tools or fixings required — staff can deploy in seconds
• Pack of 25 provides enough stock to address multiple tables across a venue

These wedges are well suited to restaurants, cafés, pub dining rooms, and event spaces where flooring is uneven, tiled, or subject to variation across different areas. They work with most standard table leg profiles, though heavily worn or very irregular flooring may need a different approach.

If you are fitting out a larger venue or want to discuss the right quantity for your site, the team is happy to help.