Grill Wall Shelves and Brackets

The Lincat GR3/WS is a wall-mounted shelf designed specifically to match the Lincat GR3 salamander grill. Its purpose is straightforward: to provide a secure, correctly rated fixing point that positions the GR3 at a consistent working height on the wall, freeing the counter or pass surface beneath for other use.

In a working kitchen this arrangement makes a practical difference. A wall-mounted salamander sits at a fixed, repeatable height throughout service, remains stable under the incidental contact that bench-mounted units can attract, and allows operators to work comfortably beneath it without obstruction. Cleaning around and below the unit at close-down is also more manageable when the space is fully clear.

Using the manufacturer-matched shelf is worth doing for reasons beyond convenience. The GR3/WS is engineered to align with the GR3's fixing geometry and carry its load correctly. A generic bracket may not suit the unit's weight distribution or mounting points, which introduces unnecessary risk in a busy service environment.

Installation requires the shelf to be fixed securely into a wall capable of bearing the combined weight of the shelf and the grill. Wall construction varies — solid masonry, stud partitions, and tiled surfaces each call for different fixings and approaches — so it is worth assessing the substrate before ordering. Fixing should be carried out by a competent installer or kitchen fit-out contractor rather than attempted without the appropriate fixings for the wall type.

This shelf suits any kitchen running a Lincat GR3 salamander where wall placement is the preferred arrangement. If you are considering the installation approach or want to confirm the GR3 is the right unit for your kitchen, the team is happy to talk it through with you.

The Lincat BR51 is a wall mounting bracket designed to allow compatible Lincat salamander grills to be installed overhead rather than taking up worktop or counter space. It is a straightforward, purpose-made accessory rather than a standalone piece of equipment, but for many kitchens it makes a meaningful difference to how the pass or cooking line is organised.

In busy service environments, worktop space is rarely in surplus. Mounting a salamander overhead using a properly rated bracket keeps the unit accessible for finishing dishes, toasting, and gratiné work, while freeing the surface below for plating or prep. The BR51 is built to suit the Lincat salamander range it was designed for, which means the fit, load rating, and fixing points are matched to the grill rather than adapted from a generic solution.

A few practical points worth considering before ordering: wall mounting a salamander requires a suitable solid masonry or adequately reinforced wall surface — a standard stud partition will not be appropriate without additional structural provision. The bracket positions the grill at a fixed height, so it is worth confirming the working height suits your pass layout before installation. You should also ensure the wall location keeps the unit within reach of its power supply without creating a cable management problem.

The BR51 is the correct accessory for operators running compatible Lincat salamander models who want to reclaim worktop space without relocating the unit entirely. It is not a universal fit and should be confirmed against your specific salamander model before purchase.

If you are unsure whether this bracket suits your existing grill or your kitchen's wall construction, our team are happy to talk it through with you.

The Lincat GR7/WS is a wall-mounting shelf made specifically for the Lincat GR7 salamander grill. Rather than sourcing a general-purpose bracket or fabricating something on site, this shelf is matched to the GR7's footprint and fixing points, providing a secure and correctly positioned mount above the cooking line without any guesswork.

Wall-mounting a salamander makes a genuine difference to day-to-day kitchen workflow. Positioning the unit at the right height lets operators work beneath it efficiently — finishing plates, browning, or glazing — whilst keeping counter space free for active service use. It also simplifies cleaning along the cooking line and helps maintain a clear, organised pass during busy periods, which matters when the kitchen is running at pace.

• Frees up counter space beneath the grill for active service use
• Positions the GR7 at a practical working height for operators
• Purpose-matched to the GR7, removing the need for improvised brackets
• Simplifies cleaning around the base of the unit and along the range top
• Contributes to a tidier, better-organised pass setup during service

This shelf is designed for the GR7 model specifically and should not be assumed compatible with other Lincat salamander variants. Wall fixings will need to be appropriate for the surface — a solid masonry wall or adequately studded partition with suitable anchors is the standard requirement. If there is any uncertainty about wall construction or load-bearing suitability, it is worth confirming this before installation begins.

The GR7/WS suits any site running a Lincat GR7 salamander where wall-mounting is the preferred arrangement over counter placement — most commonly pub kitchens, café operations, and smaller restaurant sites where worktop space is at a premium.

If you are specifying this shelf alongside a new GR7 installation or have questions about wall fixing requirements, the team are glad to talk it through before you commit.

The Parry 1875 is a set of wall mounting brackets designed specifically for use with the Parry 1872 salamander grill. Rather than occupying counter or shelf space, the brackets allow the salamander to be fixed directly to a wall surface, keeping the unit at a practical working height and freeing up the space beneath for other tasks.

In a busy kitchen, counter space is rarely in surplus. Wall-mounting a salamander is a straightforward way to reclaim that space without compromising access to the grill during service. The brackets are purpose-made for the 1872, so fitment is a direct, matched installation rather than an improvised workaround.

A few practical points worth considering before purchasing:

• Designed specifically for the Parry 1872 salamander — confirm compatibility before ordering if you have a different model
• Wall construction must be capable of supporting the weight of the mounted grill safely
• Installation should be carried out by a competent engineer or tradesperson
• The mounting position will affect usable working height — worth thinking through before fixing

These brackets are a straightforward accessory suited to kitchens where wall-mounting the 1872 salamander makes sense operationally — typically smaller kitchens with limited bench space, or where a fixed installation is preferred for workflow reasons.

If you're unsure whether these brackets are the right fit for your setup, or you'd like to talk through the installation requirements, we're happy to help.

The Parry 7075 wall brackets are a purpose-made mounting accessory designed to allow compatible Parry grill and charcoal units to be fixed securely to a wall. Rather than sitting on a stand or countertop, wall-mounted installation can free up valuable worktop space and create a cleaner, more permanent setup in a busy service kitchen.

These brackets are confirmed as compatible with Parry models 1872, CPG, CAS, and CAS2. If you are unsure whether your specific model is covered, it is worth checking before ordering — fitting the wrong bracket to a heavy piece of equipment is a straightforward problem to avoid with a quick conversation.

Wall mounting a grill unit does introduce some practical considerations worth thinking through before installation: the wall structure must be capable of bearing the combined weight of the bracket and the unit, appropriate fixings will need to suit the wall material, and positioning should account for adequate clearance to surrounding surfaces and ventilation requirements above the unit. In most cases this is a job for a competent installer or gas engineer depending on the type of unit being mounted.

These brackets suit kitchens where space efficiency matters and a fixed, permanent grill position is preferable to a freestanding arrangement. They are a simple but practical addition when setting up or reconfiguring a Parry grill installation.

If you would like to confirm compatibility with your existing Parry equipment or discuss your installation setup, the team is happy to help you work through the specifics before you order.

The Lincat OA8911 is a purpose-built wall shelf designed to be used alongside compatible Lincat salamander grills. As a manufacturer-matched accessory rather than a generic bracket, the fixing geometry and positioning are intended to work with specific Lincat salamander models — which makes for a cleaner, more reliable installation than adapting an off-the-shelf solution.

At the grill section or pass, a properly positioned shelf earns its place quickly. It gives chefs a dedicated surface close to the salamander for plates, dressed dishes, or items queuing to be finished under the heat. During a busy service, that structural tidiness reduces the small inefficiencies that build up when surfaces are improvised or when the immediate area around the grill becomes cluttered.

• Manufacturer-matched design for a secure, intended fit with compatible Lincat salamanders
• Wall-mounted to keep the area beneath and around the grill clear
• Dedicated surface positioned close to the heat source for pass efficiency
• Supports an organised workflow during high-volume covers
• Straightforward installation — no complex setup required

One practical point before ordering: Lincat produce several salamander variants and not all accessories are interchangeable across the range. It is worth confirming your existing unit is compatible with the OA8911 before purchasing — a quick check avoids a mismatch on delivery.

This shelf suits operators who already own a compatible Lincat salamander and want to make better use of the space and workflow around it. If you are unsure whether it will fit your current setup, the team are happy to check compatibility before you place an order.

The Lincat OA8909 is a purpose-made wall shelf designed to mount directly at the grill station alongside compatible Lincat salamander grills. It provides a fixed, stable surface for plates, resting dishes, and service items — keeping what the operator needs close to hand without cluttering the surrounding bench space.

At the grill station, a well-positioned shelf is one of those additions that proves its worth quickly during service. Having a dedicated surface at the unit tightens workflow, reduces unnecessary movement, and helps maintain an organised pass when covers are moving at pace. It is a straightforward piece of kit, but the absence of one becomes noticeable under pressure.

Being a genuine Lincat accessory rather than a generic aftermarket bracket, the OA8909 is engineered to align correctly with the relevant salamander models. This matters for a clean, secure fit and for safe wall installation — aftermarket alternatives can present alignment issues at the manufacturer fixing points.

One consideration worth noting before ordering: Lincat produce several salamander variants and not all accessories are interchangeable across the range. Confirming your exact salamander model reference before purchasing is a sensible step to ensure the OA8909 is the right shelf for your specific unit.

If you would like to check compatibility with your current equipment before going ahead, our team is glad to help.