KWC DVS Commercial Sinks and Taps

Deck mounted mixer tap designed with fluted handles for optimum comfort and easy operation. The mixer tap is ideal for small sinks and supplied with a swivel spout, allowing water to flow into both bowls when fitted centrally between sink bowls. The tap can be fitted to any suitable sink top drilled for tap holes at 180mm centres. Manufactured from quality chromium plated brass for a sleek finish.

Height: 155 mm Projection: 150 mm

The DVS handheld programmer is compatible with the full range of DVS washroom controls, including the sensors on the Anti-Microbial spouts and Aquarius taps. The programmer is bi-directional, enabling it to read a sensor as well as set specific parameters such as run on time, range and lock outs. This allows your service team or installer to view the settings before changing them and get information such as, how many operations, how many purges, run time and serial number.

For use with DVS branded products

The Aquarius deck mounted no-touch taps are manufactured from grade 316 stainless steel making them extremely robust and durable. The taps have a non-touch operation with an antimicrobial outlet and copper tails which provide enhanced hygiene. The integrated sensor comes pre-set, and additional settings can be programmed on site using the hand-held programmer (sold separately), these settings include increased run on times, and anti-vandal lock out functions. The tap features a built-in purge facility and is designed with a chlorination option for new installations or where hygiene flushing is required. An additional TMV is required (sold separately).

With mains kit and copper tails

With mains kit and sensor. 4 piece starter pack

This is a single round inset sink bowl from Franke Sissons, designed to be let into a fabricated or solid worktop surface. It is manufactured from grade 304 stainless steel with a satin polish finish and features a rimmed edge that seats cleanly against the worktop aperture. The bowl comes prepared for a 32mm waste outlet and overflow connection. No tap holes are included, so taps must be fed through the worktop itself or sourced as wall-mounted fittings — worth factoring in during the planning stage.

In a commercial setting, this type of bowl is commonly used at hand-wash stations, small preparation sinks, and bar or pass areas where a compact, flush-fitted sink is needed without a full sink unit. The rimmed inset design gives a neat, hygienic finish and makes it straightforward to wipe down the surrounding worktop without obstruction.

Practical advantages for operators include:

• Grade 304 stainless steel construction — durable and resistant to corrosion in food-contact environments
• Rimmed edge design seats securely into a worktop cut-out for a stable, flush fit
• Satin polish finish is easy to clean and hides surface scuffs in daily use
• No tap holes reduces risk of leaks at the bowl and keeps the installation tidy
• Compact footprint suits counter runs where space is limited

Installation requires a correctly sized cut-out in the worktop and a 32mm waste outlet connection beneath. Because no tap holes are provided, the water supply arrangement needs to be considered before the worktop is fabricated — retrofitting can be awkward once the counter is in place. The bowl itself is relatively lightweight, which makes handling straightforward during a fit-out.

This bowl suits smaller commercial kitchens, café counters, bar areas, and staff welfare facilities where a neat, practical inset sink point is needed rather than a full sink station. It is a single-bowl format, so operations requiring higher-throughput or multi-bowl washing capacity may be better served by a larger or twin-bowl alternative.

If you are unsure whether this bowl suits your worktop material, waste configuration, or tap arrangement, we are happy to talk it through before you order.

The KWC DVS F10513N is a wall-mounted shelf fabricated from grade 304 stainless steel, designed to provide a fixed, stable surface for commercial microwave ovens as well as general storage of pots, pans, and prep items. At 1200mm wide and 300mm deep, it offers a practical run of usable space without projecting excessively into the kitchen.

In a working kitchen, wall shelving earns its place by keeping surfaces clear and positioning equipment exactly where it is needed during service. Mounting a microwave at the right height and in a consistent location reduces unnecessary movement and keeps the pass or prep area organised under pressure. The triangular wall brackets provide solid support, and the shelf can be fixed either supported from underneath or hung from the brackets depending on the installation preference and wall construction.

A few practical points worth noting before installation:

• Grade 304 stainless steel construction — hygienic, easy to wipe down, and resistant to the humid conditions common in commercial kitchens
• Triangular brackets distribute load evenly and resist flex under sustained weight
• Two fixing points per bracket provide a secure wall connection
• A 20mm rear clearance allows cables to run neatly behind the shelf
• Fixings kit includes nuts and bolts — screws and wall plugs are not supplied and will need to be matched to your wall substrate

One consideration worth flagging: the shelf weighs 7.7kg before load, so the wall substrate and fixings need to be appropriate for the combined weight of the shelf, equipment, and any stored items. Hollow stud partitions, older tile-backed walls, or surfaces with unknown load ratings should be assessed before installation. For heavier or wider storage requirements, a heavier-duty shelving solution may be more appropriate.

This shelf is a practical fit for smaller kitchens, prep areas, and service counters where a single, dedicated surface for a microwave or light equipment is needed. It is well suited to cafés, sandwich bars, pub kitchens, and care catering environments where space is at a premium and clean, fixed equipment positions matter.

If you are unsure whether this shelf suits your wall construction or load requirements, the team is happy to help you work through the practicalities before you order.

The KWC DVS F3S is a self-closing pillar tap designed for commercial and public washroom installations. It delivers pre-mixed hot, cold, or blended water depending on how it is plumbed, and shuts off automatically after a set duration once the user releases the push-top head. The stainless steel body is well suited to the hygiene demands of commercial environments.

In washroom settings with consistent footfall — staff facilities, customer-facing toilets in restaurants, or welfare areas in larger operations — taps that rely on users turning them off are a persistent source of water waste. The self-closing mechanism addresses that directly. There is no motorised or electronic component to maintain; the shut-off is handled by an internal cartridge, which keeps the design straightforward and reliable over extended use.

Practical advantages for operators include:

• Automatic shut-off reduces water waste without requiring user compliance
• Push-top operation is intuitive and accessible for all users
• Stainless steel construction resists corrosion in damp washroom environments
• Pre-mixed supply simplifies installation where a single blended feed is available
• Compact pillar format suits standard deck-mounted basin installations

Installation requires a pre-mixed water supply or appropriate blending valve upstream — the tap itself does not blend independently. Confirm basin deck thickness and hole centres are compatible before ordering, and verify that supply pressure falls within the cartridge's operating range. The 2-year warranty provides reasonable assurance for a specification-grade fitting.

This tap is a practical choice for catering businesses, hospitality venues, and food production facilities where washroom water efficiency and ease of maintenance matter. It is not intended for kitchen sink applications where a more heavy-duty or higher-flow fitting would typically be more appropriate.

If you are specifying taps across multiple washroom positions or need to confirm compatibility with your existing plumbing setup, our team is happy to talk it through before you commit to an order.

The KWC DVS Aquarius is a sensor-operated hand-wash tap designed for commercial and public-facing environments where hygiene and reliability are the primary requirements. The 150mm spout height suits standard hand-wash basins commonly found in commercial kitchen washrooms, staff welfare areas, and front-of-house washroom facilities. It is supplied with a 15mm PEX hose for straightforward connection to standard pipework.

In day-to-day commercial use, touchless operation removes one of the more common cross-contamination points in a busy kitchen or washroom environment. There are no handles to touch after washing, which is a practical consideration in food-preparation settings where hygiene compliance is monitored. The integrated flow control helps manage water consumption consistently across high-footfall periods without requiring staff adjustment.

From an operational standpoint, this tap offers several practical advantages:

• Touchless activation reduces cross-contamination risk at hand-wash points
• Integrated flow control supports consistent water use without manual intervention
• Stainless steel construction is durable and straightforward to wipe down
• Sensor operation removes mechanical wear points associated with lever or twist fittings
• Compact footprint suits standard commercial hand-wash basin installations

Installation requires a 15mm cold and hot water supply, and the sensor will need an appropriate power source — confirm your existing basin setup supports sensor tap wiring before ordering. The 150mm spout height is suited to standard basin depths; if your basin is unusually deep or shallow, it is worth checking the spout reach is appropriate before proceeding.

This tap is well suited to commercial kitchens, food service operations, and hospitality venues where washroom hygiene standards form part of a food safety compliance regime. It is a practical choice for single-basin hand-wash stations rather than high-throughput multi-basin washroom banks, where a higher-output or multi-tap solution may be more appropriate.

If you are unsure whether the 150mm spout height or sensor specification suits your existing basin arrangement, the team is happy to go through the details with you before you order.

This KWC DVS wall shelf is a straightforward, robust storage and positioning solution for commercial kitchens. At 1800mm wide and 300mm deep, it offers a practical run of surface along the wall — commonly used to position a commercial microwave at a working height, or to keep pots, pans, and preparation items within easy reach of a busy station.

Fabricated from grade 304 stainless steel at 1.2mm gauge, the shelf is built to withstand the day-to-day demands of a working kitchen — resistant to moisture, cleaning chemicals, and the general wear of a busy service environment. The triangular wall brackets are designed to carry the load reliably, and the shelf can be either supported from beneath or hung from the brackets depending on your wall configuration. A 20mm cable clearance gap at the rear makes it practical for positioning powered equipment such as a microwave without awkward routing.

A few practical points worth noting before ordering:

• Wall fixings (screws and plugs) are not supplied — these need to suit your specific wall construction
• Two nuts and bolts are included, along with fixing instructions
• The shelf suits solid masonry or studwork walls where appropriate fixings are used
• Cable clearance is 20mm — check this is sufficient for your equipment's power lead

This shelf is well suited to small and medium-sized kitchens where wall-mounted storage helps free up worktop space. It works equally well in takeaways, cafés, and staff canteens. For operations needing a longer or deeper shelf run, or where the load requirement is more substantial, a heavier-duty alternative may be worth considering.

If you're unsure whether this shelf suits your wall type, equipment weight, or kitchen layout, our team is happy to talk it through with you before you place an order.

The KWC DVS Aquarius is a sensor-operated handwash tap finished in stainless steel, designed for commercial washroom and kitchen handwash installations. The 200mm spout reach suits standard wall-mounted or deck-mounted basins, and the included 15mm PEX hose simplifies connection to existing pipework. Operation is entirely touchless — users activate flow by placing their hands beneath the sensor, with no levers or handles to touch.

In busy commercial environments, touchless taps are a practical hygiene measure rather than a luxury addition. Where staff are moving between food preparation, waste handling, and handwashing throughout service, eliminating touch points on the tap itself reduces the risk of cross-contamination at the basin. The integrated flow control maintains consistent output without requiring user adjustment, which also helps to manage water consumption over a full service period.

From an operational standpoint, the Aquarius offers a few clear advantages worth noting:

• No touch points reduces cross-contamination risk at handwash stations
• Integrated flow control supports consistent output and water efficiency
• Stainless steel construction withstands the demands of a commercial environment
• PEX hose included, reducing installation complexity
• Straightforward sensor operation requires no staff instruction

Installation is relatively straightforward for a qualified plumber. The 15mm PEX hose connects to standard supply pipework, and the compact body suits most commercial basin configurations. It is worth confirming basin deck thickness and the available clearance beneath the basin before ordering, as these can affect fitting. This tap requires a power supply for the sensor — electrical connection requirements should be confirmed with your installer prior to purchase.

The Aquarius 200mm is well suited to staff handwash basins in commercial kitchens, food preparation areas, and hospitality washrooms where hygiene standards and throughput both matter. For larger installations or multi-basin setups, it is worth discussing options with us — some sites benefit from a different configuration or a higher-volume solution.

If you are unsure whether this tap is the right fit for your basin or installation, we are happy to talk it through before you place an order.

The KWC DVS Single Station Antimicrobial Mains Kit is a plumbing supply kit designed to connect a single automatic tap directly to a standard mains pressure water supply. It is built for use on standard pressure systems operating between 1 and 7 BAR, making it compatible with the majority of commercial mains-fed installations in the UK without the need for additional pressure regulation in most cases.

The antimicrobial construction is a practical consideration in commercial food preparation and healthcare-adjacent environments, where surface hygiene and the inhibition of bacterial growth on contact surfaces are part of broader hygiene compliance. This is not a feature to overlook in kitchens operating under food safety regulations or in facilities with high handwashing frequency.

At its core, this is a straightforward installation component rather than a complex piece of equipment. Its value lies in reliability and compatibility:

• Designed specifically for use with automatic sensor-operated taps
• Antimicrobial materials help reduce bacterial growth on the unit itself
• Suitable for standard mains pressure systems from 1 to 7 BAR
• Compact form factor suits under-counter or confined installation spaces
• Pairs with KWC DVS automatic tap ranges for a matched installation

Before specifying this kit, it is worth confirming your site's static water pressure falls within the compatible range. Sites with unusually low or high pressure, or those fed via a boosted or unvented system, may require a different configuration. The kit is intended for single-station use only, so multi-tap or back-to-back installations would require separate provisions.

This kit is well suited to single-basin handwash stations in commercial kitchens, food preparation areas, or washrooms where an automatic tap is being installed or replaced on a standard mains supply. If you are unsure whether this kit is the right match for your tap model or water supply setup, it is worth getting in touch before ordering.

This KWC DVS sink unit is a self-assembly, fully pressed 304 stainless steel sink with an inclined left hand drainer, supplied complete with stand, undershelf, taps and waste fittings. It arrives flat packed, which simplifies delivery through restricted doorways and corridors, and assembles to a standard standing height suitable for most commercial kitchen environments.

In day-to-day kitchen use, a sink of this footprint handles general pot wash, food preparation rinsing and utensil cleaning comfortably in lower to medium-volume operations. The inclined drainer encourages water runoff rather than pooling, which reduces the effort needed to keep the surface clean during a busy service. The 304 stainless steel construction is the standard specification for commercial catering sinks and holds up well to regular cleaning agents and daily wear.

The practical advantages this unit offers include:

• Flat pack delivery reduces access problems in tight premises
• Inclined drainer aids drainage and simplifies surface cleaning
• Complete package including stand, shelf, taps and waste reduces additional sourcing
• 304 stainless steel resists corrosion and is straightforward to sanitise
• Self-assembly construction allows positioning to be confirmed on site before fixing

As a self-assembly unit, the sink requires connection to a cold water supply and a drainage point positioned appropriately for the waste outlet. The undershelf provides useful dry storage beneath the unit. Given its dimensions and standing height, it is worth confirming that your chosen position allows comfortable working posture and adequate clearance from adjacent equipment or walls before assembly begins.

This sink is well suited to small cafés, takeaways, bakeries, staff kitchens and lower-volume food businesses where a reliable, straightforward sink solution is needed without the cost of a fabricated bespoke unit. For higher-volume or more demanding wash environments, a heavier-gauge or larger double-bowl configuration may serve better.

If you are unsure whether this sink suits your planned layout or water connection points, our team is happy to talk it through before you place an order.

This KWC DVS wall-mounted wash basin is a compact, purpose-built hand wash unit constructed from grade 304 stainless steel. It is designed for commercial kitchens, food preparation areas, and any back-of-house environment where a dedicated hand wash point is required but available space is limited. The unit is supplied complete with a waste kit, which reduces the number of loose components to source before installation.

In a working kitchen, keeping the wash point off the worktop matters. A wall-mounted basin clears bench space that is invariably occupied during service, and because it has no floor footprint, it fits into corners and service corridors that a freestanding unit simply could not. The 304-grade stainless steel holds up reliably to repeated chemical sanitising and the general wear of a professional kitchen environment without corroding or deteriorating.

Practical advantages for kitchen operators include:

• Wall-mounted design keeps worktop and floor space entirely free
• Grade 304 stainless steel withstands frequent sanitising and chemical cleaning
• Supplied with waste kit for a more straightforward installation
• Lightweight construction makes positioning and fitting easier on site
• Tap ledge included to accommodate a tap fitting of your choice

Installation requires suitable wall fixings for the surface type and a connection to an existing waste run. It is worth noting that a tap is not included — you will need to source a compatible tap separately, so it is sensible to confirm your flow rate and temperature requirements before ordering. If the basin is to be fixed to a stud partition wall, additional noggins or a backing plate will likely be needed to ensure the wall can take a wall-mounted fixture safely.

This basin is well suited to small and medium commercial kitchens, café prep areas, staff welfare facilities, and mobile or temporary catering setups where a compact, hygienic hand wash point is a requirement rather than a luxury. For busier sites where a deeper bowl or a larger wash area would better suit the throughput, a larger format basin may be worth considering.

If you have questions about tap compatibility or whether this unit suits your installation, we are glad to help you work through it before you order.

This compact wash hand basin from KWC DVS is a straightforward handwashing solution for commercial environments where space is genuinely limited. Manufactured from grade 304 stainless steel, it is built to handle the wet, busy conditions of a working kitchen and meets the hygiene standards typically expected in food preparation areas.

The 290mm footprint makes it a practical choice for tight corners, small prep rooms, staff wash areas, or back-of-house spaces where a standard-size basin simply would not fit. It functions as a proper dedicated handwash station — an important practical point in kitchens where food safety inspections require handwashing facilities to be separate from food preparation sinks.

Grade 304 stainless steel resists corrosion well in wet environments and wipes down cleanly at the end of service. The unit is supplied with a waste kit included, which removes a common sourcing step and simplifies the installation process.

• Grade 304 stainless steel construction handles wet kitchen conditions reliably
• 290mm square footprint suits constrained or unusually shaped installation spaces
• Waste kit included, reducing the number of separate components to source
• Dedicated handwash station to support separation from food preparation areas
• Lightweight at 2kg, making positioning and wall mounting straightforward

Installation requires a hot and cold water supply, appropriate waste drainage, and wall fixings suited to the surface. The apron support assists with wall mounting. Before installation, it is worth confirming that the positioning meets your local environmental health officer's requirements for dedicated handwashing provision.

This basin is well suited to small kitchens, kiosks, mobile catering units, staff welfare areas, or any site where space is a genuine constraint. For higher-footfall or larger sites, a full-size commercial wash hand basin may be a more appropriate choice.

If you want to talk through whether this size fits your setup, the team is happy to help you think it through before you order.

This Franke Sissons round inset sink bowl is a compact, single-bowl drop-in unit designed to fit a prepared worktop cutout. The rimmed edge seats flush against the worktop surface, producing a clean, sealed finish that prevents water tracking beneath the counter. It is a straightforward inset product — not surface-mounted — and is supplied with waste plug, chain, and overflow ready for connection.

The bowl is constructed from 304-grade stainless steel, which is the standard material specification across commercial catering for good reason. It resists corrosion, tolerates regular exposure to commercial cleaning chemicals, and holds up under sustained daily use. The satin polish finish is easy to wipe down and maintains a professional appearance without demanding much maintenance.

In practice, this type of compact round bowl is most commonly used in bar counters, serveries, small prep stations, and secondary wash points rather than as a primary pot-wash or high-volume position. It is well suited to operators who need a dedicated rinse or prep point without committing to a full sink run.

• Rimmed edge gives a neat, flush finish against the worktop surface
• Supplied with waste plug, chain, and overflow — ready to connect
• 304 stainless construction handles standard commercial cleaning products
• Satin polish finish is straightforward to clean and maintain

Installation requires a correctly sized worktop cutout, a worktop material suitable for wet environments, and accessible plumbing beneath the counter for waste and overflow connections. These are worth confirming before cutting.

This bowl suits operators fitting out bar areas, small prep stations, or ancillary wash points. Where a larger bowl or heavier daily throughput is needed, a deeper or wider configuration may be more appropriate. If you are specifying multiple bowls or planning a sink layout across a kitchen, our team are happy to talk through the arrangement before you order.

The KWC DVS wall-mounted bucket sink is a purpose-built utility sink intended for the disposal of dirty water and general cleaning tasks in commercial catering environments. Constructed from stainless steel with an integrated splashback, it gives kitchen teams a dedicated point for emptying mop buckets and disposing of waste water without encroaching on food preparation or dishwash areas.

In day-to-day operation, having a separate bucket sink is both a practical workflow measure and a hygiene consideration. Dirty water disposal at a prep sink or pot wash creates cross-contamination risk and adds unnecessary strain on areas that have other jobs to do. A dedicated utility point keeps that work contained and manageable. The integrated splashback reduces the risk of moisture reaching the wall surface behind the sink, which over time makes a noticeable difference to cleaning time and wall condition.

• Stainless steel construction resists corrosion and wipes down quickly between uses
• Integrated splashback protects wall surfaces and reduces routine cleaning effort
• Wall-mounted format keeps floor space clear and simplifies floor cleaning underneath
• Compact footprint suits back-of-house corridors, utility rooms, and smaller kitchens
• Straightforward to keep hygienic — no awkward joints or surfaces where dirt can accumulate

Installation requires a secure wall fixing capable of supporting the unit under load, a compatible waste outlet, and a water supply if plumbed. It is worth checking your drainage routing before fitting — in older premises, waste pipe positions can restrict where a sink of this type can be positioned practically. The lightweight stainless construction, at 4.5kg unloaded, makes positioning and wall fixing relatively straightforward.

This sink is well suited to cafés, pub kitchens, small restaurants, and catering operations where a practical, no-frills utility sink is needed for cleaning duties. For sites with heavier daily use or larger mop buckets in regular circulation, a more substantial unit may be worth considering.

If you would like to talk through whether this suits your drainage arrangement or back-of-house setup, we are glad to help.