Franke Sissons Stainless Steel Rimmed Edge Round Inset Sink Bowl 355mm product image

KWC DVS

Franke Sissons 355mm Round Inset Sink Bowl Stainless Steel

SKU: CD985

£114.00(£136.80 inc VAT)
Get a quote

Request a callback

Leave your details and we will call you back about Franke Sissons 355mm Round Inset Sink Bowl Stainless Steel.

Delivery Information

Price Match

  • In the event of equipment failure any parts needed will be provided 2
  • In the event of equipment failure an engineer will be sent for an onsite repair 2

This is a single round inset sink bowl from Franke Sissons, designed to be let into a fabricated or solid worktop surface. It is manufactured from grade 304 stainless steel with a satin polish finish and features a rimmed edge that seats cleanly against the worktop aperture. The bowl comes prepared for a 32mm waste outlet and overflow connection. No tap holes are included, so taps must be fed through the worktop itself or sourced as wall-mounted fittings — worth factoring in during the planning stage.

In a commercial setting, this type of bowl is commonly used at hand-wash stations, small preparation sinks, and bar or pass areas where a compact, flush-fitted sink is needed without a full sink unit. The rimmed inset design gives a neat, hygienic finish and makes it straightforward to wipe down the surrounding worktop without obstruction.

Practical advantages for operators include:

  • Grade 304 stainless steel construction — durable and resistant to corrosion in food-contact environments
  • Rimmed edge design seats securely into a worktop cut-out for a stable, flush fit
  • Satin polish finish is easy to clean and hides surface scuffs in daily use
  • No tap holes reduces risk of leaks at the bowl and keeps the installation tidy
  • Compact footprint suits counter runs where space is limited

Installation requires a correctly sized cut-out in the worktop and a 32mm waste outlet connection beneath. Because no tap holes are provided, the water supply arrangement needs to be considered before the worktop is fabricated — retrofitting can be awkward once the counter is in place. The bowl itself is relatively lightweight, which makes handling straightforward during a fit-out.

This bowl suits smaller commercial kitchens, café counters, bar areas, and staff welfare facilities where a neat, practical inset sink point is needed rather than a full sink station. It is a single-bowl format, so operations requiring higher-throughput or multi-bowl washing capacity may be better served by a larger or twin-bowl alternative.

If you are unsure whether this bowl suits your worktop material, waste configuration, or tap arrangement, we are happy to talk it through before you order.

Frequently asked questions

Does this sink bowl come with a waste fitting or overflow kit?

No — the bowl is prepared for a 32mm waste outlet and overflow, but waste fittings are not included and will need to be sourced separately. It is worth confirming compatibility with your chosen waste fitting before ordering.

How do I fit taps if there are no tap holes in the bowl?

Taps must be mounted either through the worktop surface adjacent to the bowl or as wall-mounted fittings above it. This needs to be planned before the worktop is cut and fabricated, as adding tap holes to a finished counter run is not straightforward.

Is this bowl suitable for a food preparation area or only for hand-washing?

Grade 304 stainless steel is an accepted material for food-contact surfaces, so the bowl can be used in light prep or rinsing applications as well as hand-wash points. For high-throughput preparation or washing-up duties, a deeper or larger-capacity sink would typically be more practical.
Franke Sissons 355mm Round Inset Sink Bowl Stainless Steel

£114.00(£136.80 inc VAT)

£114.00(£136.80 inc VAT)

This is a single round inset sink bowl from Franke Sissons, designed to be let into a fabricated or solid worktop surface. It is manufactured from grade 304 stainless steel with a satin polish finish and features a rimmed edge that seats cleanly against the worktop aperture. The bowl comes prepared for a 32mm waste outlet and overflow connection. No tap holes are included, so taps must be fed through the worktop itself or sourced as wall-mounted fittings — worth factoring in during the planning stage.

In a commercial setting, this type of bowl is commonly used at hand-wash stations, small preparation sinks, and bar or pass areas where a compact, flush-fitted sink is needed without a full sink unit. The rimmed inset design gives a neat, hygienic finish and makes it straightforward to wipe down the surrounding worktop without obstruction.

Practical advantages for operators include:

  • Grade 304 stainless steel construction — durable and resistant to corrosion in food-contact environments
  • Rimmed edge design seats securely into a worktop cut-out for a stable, flush fit
  • Satin polish finish is easy to clean and hides surface scuffs in daily use
  • No tap holes reduces risk of leaks at the bowl and keeps the installation tidy
  • Compact footprint suits counter runs where space is limited

Installation requires a correctly sized cut-out in the worktop and a 32mm waste outlet connection beneath. Because no tap holes are provided, the water supply arrangement needs to be considered before the worktop is fabricated — retrofitting can be awkward once the counter is in place. The bowl itself is relatively lightweight, which makes handling straightforward during a fit-out.

This bowl suits smaller commercial kitchens, café counters, bar areas, and staff welfare facilities where a neat, practical inset sink point is needed rather than a full sink station. It is a single-bowl format, so operations requiring higher-throughput or multi-bowl washing capacity may be better served by a larger or twin-bowl alternative.

If you are unsure whether this bowl suits your worktop material, waste configuration, or tap arrangement, we are happy to talk it through before you order.