Lincat Auto Fill Water Boilers

The Lincat EB3FX is a mains-fed, counter-top water boiler with an integrated FilterFlow filtration system. It connects directly to the cold water supply and refills automatically, maintaining a consistent hot water supply throughout service without requiring staff to monitor or manually top up the tank. A colour touchscreen gives straightforward control over temperature and a seven-day programmable timer, so the unit can be scheduled around actual opening hours rather than left running overnight or during closed periods.

In a busy service environment, the continuous draw capability removes one of the more common friction points around hot beverage service. Staff can work through a peak period drawing hot water repeatedly without waiting for a manual refill to heat through, and the consistent output temperature means the quality of the draw holds up from the first cup to the last. The onboard Eco Mode reduces the working volume and energy draw during quieter periods while keeping the boiler ready to respond when footfall picks back up — a practical balance for sites with uneven demand across the day.

The FilterFlow system treats incoming water before it enters the tank, slowing the rate of limescale accumulation on the element and tank surfaces. In hard-water areas this is a meaningful operational consideration — longer intervals between descaling and more consistent thermal efficiency over time rather than gradual degradation. Day-to-day advantages include:

• Automatic refill removes the need for staff monitoring during service
• FilterFlow filtration slows limescale build-up and extends service intervals
• Eco Mode reduces energy draw during off-peak periods without a cold restart
• Seven-day timer allows scheduling around opening hours and closed periods
• On-screen diagnostics support straightforward fault identification

Installation requirements are modest. The unit needs a mains cold water connection via a standard service valve and a 13-amp plug socket — no dedicated electrical circuit or specialist plumbing is required, which keeps setup costs low. It is designed for counter-top use, so it is worth confirming the intended bench position has adequate load-bearing capacity and is within practical reach of both the water supply and a socket. Access around the unit should be kept clear for maintenance and to allow adequate ventilation; recessed or in-cupboard installation is not suitable.

The EB3FX is well suited to cafés, staff canteens, office kitchens, hotel hospitality points, and similar environments where reliable continuous hot water is needed without the footprint of a floor-standing unit. For very high-volume sites drawing large quantities simultaneously across extended service periods, a higher-capacity boiler is worth considering.

If you are unsure whether the EB3FX is the right fit for your site layout or service volumes, our team is happy to talk it through with you before you commit.

The Lincat EB3FX/PB is a counter or wall-mounted water boiler with an integrated filtration system and automatic mains fill. It holds 15 litres and refills directly from the cold water supply throughout service, removing the need for staff to monitor or top up the tank manually. Push-button dispensing keeps operation simple and is well suited to both staffed and self-service settings.

In practice, the auto-fill and built-in filtration combination makes a noticeable difference in busier operations. The boiler maintains a consistent hot water supply through back-to-back demand — breakfast service, lunchtime rushes, or meeting catering — without the recovery delays that can affect manually filled units. In hard water areas particularly, the continuous filtration helps reduce scale build-up, which has a direct effect on maintenance frequency and the taste of hot drinks served.

From a day-to-day operational standpoint, the EB3FX/PB offers several practical advantages:

• Adjustable temperature output suitable for tea, coffee, and specialist hot drinks systems
• LCD panel provides clear operational status and diagnostic feedback
• PIN security and lock mode for controlled access in self-service environments
• 7-day programmable timer to manage energy use across varied trading patterns
• Tool-free filter cartridge replacement supports straightforward in-house maintenance

Installation is uncomplicated. The unit runs from a standard 13-amp plug, so no dedicated electrical circuit is required, and it connects directly to a mains cold water feed. It is compact enough to sit on most counter positions and can be wall-mounted where bench space is limited. Filter cartridges are designed for easy replacement without specialist intervention.

This boiler is a practical fit for cafés, hotel lounges, office catering facilities, staff restaurants, and similar settings where reliable hot water availability matters throughout the day. It is a counter-top solution suited to moderate throughput — for sites with significantly higher or more concentrated demand, a higher-capacity unit may be worth considering.

If you would like to talk through whether this unit is the right match for your service volumes or water supply setup, the team is happy to help.

The Lincat EB6FX is a countertop, mains-fed automatic fill water boiler with a built-in filtration system. It connects directly to the cold water supply, fills and reheats without manual intervention, and delivers boiling water on demand throughout the day. The integrated filter cartridge reduces scale accumulation and helps maintain water quality — a practical consideration on any site where water hardness is known to affect taste or shorten service intervals.

In steady service, the EB6FX is designed to keep pace with continuous draw-off without the recovery delays that can disrupt a busy beverage counter. The LCD panel displays operating status and active diagnostics, so any issue can be identified promptly rather than noticed only after performance has already dropped. A 7-day programmable timer means the unit can be scheduled around your opening hours, avoiding unnecessary energy use during closed periods.

The practical day-to-day advantages for operators include:

• Automatic fill removes the need for manual water management during service
• Integrated filtration reduces scale build-up and can extend time between services
• Adjustable temperature settings support a range of hot beverages beyond standard tea and coffee
• Programmable timer aligns energy use with actual operating hours
• Accessible filter cartridges and an easy-descale function keep routine maintenance manageable

Installation is straightforward for most sites. The unit runs from a standard 13-amp plug, so no dedicated electrical circuit or rewiring is needed. It does require a mains cold water connection, so positioning near an existing supply point is worth planning at the outset. As a countertop unit it has a modest footprint, but placement should allow clear tap access and adequate clearance for drainage of any minor drip or condensation.

The EB6FX suits cafés, hotel breakfast operations, workplace catering facilities, and smaller hospitality venues where reliable boiling water is needed throughout the day without the space or infrastructure demands of a floor-standing unit. Sites with sustained high-volume demand across multiple service points may find a higher-capacity boiler is a better fit for their throughput requirements.

If you'd like to talk through whether the output suits your service pattern, or you have questions about the water connection and placement, we're happy to help you work it out before you commit.

The Lincat EB4FX is a countertop automatic fill water boiler that connects directly to the mains cold water supply, filters the incoming water through an integrated cartridge, and maintains a continuous supply of boiling water throughout the service period. Unlike a manually filled boiler, there is no need to monitor or top up the vessel during service — the auto-fill function keeps it ready without any operator intervention.

In café, hospitality, and workplace catering environments, consistent hot water availability matters more than it often appears until it is absent. The EB4FX is built for steady demand across a full service day rather than short, intense bursts. The built-in filtration is a practical advantage in hard-water areas, where scale accumulation can shorten equipment life and affect the taste of finished drinks. An adjustable temperature control adds useful flexibility where the menu includes green teas or delicate infusions that benefit from water below a rolling boil.

• Automatic mains fill removes manual topping up during service
• Integrated filter cartridge reduces scale and protects internal components
• Adjustable temperature suits a range of teas, infusions, and hot beverages
• 7-day programmable timer limits energy consumption outside operating hours
• Accessible descale function keeps routine maintenance straightforward

The EB4FX operates from a standard 13-amp plug, so no dedicated electrical circuit or rewiring is required. It does need a mains cold water connection at the installation point — worth confirming before ordering if the intended position is away from an existing supply. As a countertop unit, it requires a stable surface with adequate clearance for ventilation and safe tap access.

This boiler suits cafés, hotel beverage stations, staff canteens, and similar settings with moderate, consistent hot water demand. It is not ideally matched to very high-volume operations where sustained peak output is the priority — a larger-capacity unit would be the more appropriate choice in those settings. Equally, a site with very light or occasional demand may find a smaller, simpler model a better fit.

If you are unsure whether the output matches your expected service volume, or want to discuss the water connection requirements, the team is happy to talk it through before you commit to an order.