Lincat Range Cookers

The Lincat Silverlink 600 ESLR9C is a freestanding electric range combining six individually controlled hob plates with a twin fan-assisted oven cavity in a single 600mm-depth footprint. It is designed for continuous daily use in professional kitchens that need reliable surface cooking capacity alongside consistent oven performance, without the cost or complexity of a full modular suite.

In a working kitchen, the six-plate configuration supports multi-pan cooking throughout a busy service — stocks, sauces, and accompaniments running simultaneously while the oven handles roasts, braises, or baked items below. The fan-assisted oven circulates heat evenly across both cavities, which helps reduce uneven cooking results during high-demand periods. The sealed, fully pressed hob top keeps debris out of the unit structure, a practical consideration when the range is in continuous use across a long shift.

Several design details translate into genuine day-to-day advantages:

• Thermostatically controlled hob plates allow accurate temperature management without constant manual adjustment
• Vitreous enamelled oven liners and a removable floor plate make end-of-service cleaning more straightforward
• Double-insulated oven doors reduce heat transfer to the surrounding kitchen environment
• Height-adjustable legs with rear castors allow the unit to be repositioned for deep cleaning
• Side and rear panels support installation in a suite alongside other Silverlink 600 equipment

As an electric unit, the ESLR9C requires an adequate three-phase electrical supply and a dedicated isolation point. These requirements should be confirmed with a qualified electrician before ordering. The 600mm depth format suits kitchens where space is managed carefully, though the full width of a six-plate range still occupies a substantial run of linear space — worth measuring accurately at the planning stage.

This range is well suited to mid-sized restaurant kitchens, pub kitchens, and contract catering operations that need a dependable, multi-function cooking station without over-specifying for the environment. For very high-volume operations running multiple sittings or large-scale batch cooking, it is worth considering whether a heavier-duty model with greater thermal capacity would be a better fit.

If you would like to talk through whether this unit suits your service volume, kitchen layout, or electrical supply, the team is happy to work through the specifics with you before you commit.

The Lincat Phoenix PHGR01 is a freestanding gas range combining six hob burners with a full-width static oven beneath. Built by Lincat, a well-established UK commercial catering equipment manufacturer, it is designed to handle the cooking demands of a working professional kitchen across regular service periods.

Six burners provide enough simultaneous cooking positions to run a broad range of tasks within a single service — saucing, sautéing, holding large pots at temperature, and running multiple dishes in parallel. The pressed and sealed hob top contains spillage rather than allowing it to track into the body of the range, which becomes a genuine advantage when service is moving quickly and cleaning windows are limited. Each burner carries flame failure protection, cutting the gas supply automatically if the flame is lost — a standard commercial safety requirement and one worth confirming is present on any range you consider.

The static oven sits below the hob and is accessed via two side-hinged doors. This arrangement works well in tighter kitchen runs where a single wide door would obstruct passing traffic. Practical benefits worth noting include:

• Sealed hob top contains spillage and simplifies end-of-service cleaning
• Flame failure protection on all burners meets standard commercial safety requirements
• Vitreous enamelled oven interior resists staining and cleans down efficiently
• Removable oven floor plate allows thorough access without tools
• Supplied on castors as standard, supporting repositioning and deep cleaning beneath the unit

The PHGR01 runs on natural gas or LPG — if LPG is required, confirm conversion requirements before ordering. Installation must be carried out by a Gas Safe registered engineer, and the unit needs positioning beneath a suitable extraction canopy. The castors provide reasonable layout flexibility, though a level, stable floor and appropriate clearances to combustible surfaces remain essential.

This range is well suited to mid-sized restaurants, pub kitchens, and catering operations running regular à la carte or set-menu service. For very high-volume sites — large banqueting operations, high-turnover covers, or continuous double-shift kitchens — a heavier-duty range with greater oven capacity may be a more appropriate fit. At the other end, smaller operations with limited floor space may find a four-burner format offers a better footprint-to-output balance.

If you are working out whether the PHGR01 suits your kitchen's layout and service demands, the team is happy to talk it through before you commit.

The Lincat Silverlink SLR9C is a six-burner gas range from Lincat's well-established Silverlink 600 series. It combines a full-width six-burner hob surface with a gas-fired static oven beneath, built to a 600mm depth footprint that integrates into a standard cooking suite or operates as a standalone unit on a kitchen line.

During a busy service, the six-burner layout allows cooking teams to run multiple tasks simultaneously — sautéing, reducing, holding, and batch work can all happen across the same surface without stations getting in each other's way. The hob tops are fully pressed and sealed, which contains spills at the surface, prevents debris reaching the chassis, and keeps end-of-service cleaning straightforward. Flame failure devices are fitted to all burners, cutting the gas supply automatically if a flame is lost — a standard safety requirement in commercial kitchen environments.

The static gas oven beneath gives useful secondary capacity for roasting, baking, or holding through a service. Multiple shelf positions offer some flexibility over how the oven space is used, and the side-hinged doors keep access clear even in tighter kitchen layouts. The low-level flue design keeps the rear of the unit unobstructed, so tall stockpots and large vessels can sit on the rear burners without restriction.

• Sealed hob tops contain spills and simplify end-of-service cleaning
• Flame failure devices on all burners support safe operation during busy periods
• Static oven with multiple shelf positions for flexible batch cooking
• Low-level flue allows tall vessels on rear burners without obstruction
• Rear castors allow the unit to be moved out for thorough cleaning beneath

Installation requires a natural gas or LPG supply — if your site runs LPG, confirm conversion requirements at the point of order. The unit will typically be positioned beneath a canopy extraction system with appropriate clearance to combustibles. All installation and commissioning must be carried out by a Gas Safe registered engineer.

The SLR9C is well suited to smaller restaurants, café bars, pubs, care homes, and similar operations running a moderate-volume kitchen service. It is a practical choice where a reliable, cleanable range is needed without the complexity or footprint of a heavier-duty model. Sites running longer services, higher covers, or requiring greater oven capacity may find a higher-output model more appropriate for their needs.

If you would like to talk through whether this range fits your kitchen layout and service volume, the team is happy to help you work it out before you commit.

The Lincat Opus 800 OE8010 is a freestanding electric range cooker built to the 800mm depth standard of the Opus 800 series. It combines four solid hob plates with a single fan-assisted oven, and is intended for the kind of sustained, multi-dish cooking that characterises a working commercial kitchen service. Lincat is a well-established name in UK professional kitchens, and the Opus 800 line reflects that background — practical, solidly built, and straightforward to operate without unnecessary complexity.

During service, the four hob plates allow simultaneous cooking across different dishes and temperature requirements. Thermostatic control gives operators reliable management at both high heat and lower holding temperatures, which is useful when running reductions or delicate sauces alongside high-output work at the same time. The fan-assisted oven circulates heat evenly through the cavity, supporting consistent results when loaded across multiple shelf positions — a routine requirement during a busy service where timing across different dishes matters.

Several design details help reduce the effort involved between services:

• Full-depth dished hob surface contains spillages and simplifies end-of-service cleaning
• Vitreous enamelled oven liners resist staining and are more forgiving to maintain than bare steel
• Removable oven base reduces the effort involved in deep cleaning the cavity
• Three shelves across four positions accommodate different tray sizes and joint weights
• Heavy-duty castors allow the unit to be moved for thorough cleaning beneath

The 800mm depth requires adequate wall run or island space, so confirming your floor plan before ordering is worthwhile. The unit requires a suitable electrical supply to support its total load — it is advisable to verify your kitchen's supply configuration at the point of order, particularly where single- or three-phase availability may be a constraint. Extraction above the cooking position should also be confirmed as adequate before installation.

The OE8010 is well suited to restaurants, hotel kitchens, and contract catering operations running a steady volume of covers. It sits mid-range within the Opus 800 line — operations with higher throughput demands or a need for greater oven capacity may find a multi-oven configuration or heavier-duty model more appropriate, while smaller or lower-volume sites may not require the full 800mm footprint.

If you would like to talk through how this range fits your kitchen layout, service pattern, or electrical supply before committing to an order, the team is happy to help you work through the detail.

The Lincat Opus 800 OE8008 is a six-plate electric range cooker combining a full six-zone hob with a fan-assisted double-door oven in a single 800mm-deep unit. It is designed to handle hob and oven demand running concurrently through a busy service, which makes it a practical choice for kitchens that need a reliable all-electric cooking platform without separating hob and oven capacity across different pieces of equipment.

Each of the six hob plates offers thermostatic control across a broad temperature range, giving chefs consistent, repeatable output whether holding at low heat or pushing through peak covers. The fan-assisted oven circulates heat evenly across all shelf positions, which is particularly useful when the oven is fully loaded with GN trays during batch cooking, finishing, or reheating alongside active hob use — a common scenario in busy service environments where uneven oven results cause real operational problems.

From a day-to-day operational standpoint, the OE8008 offers several practical advantages:

• Fan-assisted oven delivers consistent heat distribution under full load
• Vitreous enamelled oven liners and removable panels reduce cleaning time between services
• Dished hob surface contains spills and simplifies daily cleaning routines
• Side-opening oven doors allow safer access in tighter kitchen configurations
• Heavy-duty castors permit repositioning and improve access for cleaning behind the unit

As an electric range, the OE8008 requires a three-phase electrical supply and installation by a qualified electrician experienced in commercial kitchen fit-outs — a standard single-phase connection is not suitable. The 800mm depth integrates well into a planned cooking suite, but it is worth confirming clearances to adjacent equipment and walls before ordering, particularly in refits where the existing line was built around shallower 700mm-depth equipment. Adequate extraction above the unit is essential and should be sized to handle the combined output of the hob and oven running simultaneously under full load.

The OE8008 is well suited to independent restaurants, gastro pubs, and catering operations running moderate to high covers where an all-electric cooking suite is preferred or required. It sits within a broader range of configurations — if your service volume is particularly demanding or your menu places heavy continuous load on both hob and oven, a higher-output model may be worth considering. Equally, if your kitchen operates at lower volumes, a smaller-footprint unit may offer better value in day-to-day running costs.

If you are working through whether this range fits your kitchen layout, electrical setup, or service pattern, we are happy to talk it through before you commit to an order.

The Lincat Opus OE8015 is a freestanding electric range combining a full-width cast iron solid top with a fan-assisted oven below. It sits within the Opus 800 series and is designed for high-throughput kitchens where a single unit needs to carry both direct cooking and oven work through continuous service periods.

The solid top is divided into two independently controlled zones, each adjusted via a six-position simmerstat. Cast iron builds a natural heat gradient from the centre outward — experienced cooks use this deliberately, positioning work that needs high, direct heat at the centre while using the cooler outer edges for holding and gentle tasks. A perimeter spillage channel helps contain liquids during busy service, and the full-width machined surface makes good use of the available hotplate area without raised edges or dead zones interrupting workflow.

The oven uses twin fan-assisted heating to circulate air evenly through the cavity, supporting consistent results across multiple shelf positions at the same time. Side-hinged doors open to 180 degrees, which makes loading and unloading at pace more straightforward. Removable interior liners — base, sides, and top — reduce the time and effort required for end-of-day cleaning considerably compared with fixed-interior designs.

• Independent solid top zone control for flexible heat management during service
• Fan-assisted oven circulates heat evenly across all shelf positions simultaneously
• Removable oven liners simplify end-of-service cleaning significantly
• Natural cast iron heat gradient supports varied cooking techniques on one surface
• Heavy-duty castors allow repositioning and access for cleaning beneath the unit

The OE8015 sits within the standard 800mm depth suite format, which means it aligns cleanly with other Opus 800 series equipment if you are building or extending a cooking suite. Installation requires a suitable electrical supply — whether three-phase or single-phase depends on your site configuration, and this is worth confirming with your electrician before ordering. Canopy extraction above the range is required. The unit's weight and footprint should be factored into layout planning, particularly where floor protection is needed during delivery and positioning.

This range is well suited to restaurants, hotel kitchens, and contract catering operations running consistent covers across lunch and evening services. For operations with extended service periods or greater oven capacity demands, a heavier-duty or larger-format model may be worth considering. Equally, kitchens with limited space or lower throughput may find a more compact range offers better value.

If you would like to talk through whether the OE8015 fits your kitchen layout and service pattern, our team is happy to work through the details with you.