Marco Auto Fill Water Boilers

The Marco MT8F is a mains-fed, autofill water boiler with an integrated filtration system, designed for continuous hot water service in commercial and semi-commercial environments. Where a manual-fill boiler requires monitoring and periodic topping up, the MT8F connects directly to the cold water supply and refills itself automatically, maintaining a consistent volume of near-boiling water throughout the service period. The built-in filter treats incoming water before it enters the heating chamber, which helps manage scale build-up in harder water areas and contributes to a cleaner, more consistent cup quality across the day.

In practice, this type of boiler performs well where hot water demand is steady rather than exceptionally high — a café counter, a hotel breakfast station, a staff restaurant servery, or a catered meeting suite are all typical applications. The autofill mechanism keeps the unit operational without requiring the team to intervene during service, and the filtration layer adds a degree of protection to the heating element that supports longer-term reliability.

Practical benefits worth noting:

• Autofill operation removes the risk of running dry during service
• Integrated filtration helps protect internal components in hard water areas
• Single-tap dispensing suits a single counter station with one operator
• Runs from a standard 13-amp socket with no dedicated electrical supply needed
• Compact footprint fits most existing counter or shelf positions

Installation is straightforward — the unit needs a mains cold water connection and a standard 13-amp socket, so most existing counter positions can accommodate it without electrical work. You will need to route a water supply line to the unit, and in harder water areas, keeping to the recommended filter replacement schedule is important for maintaining performance. The single-tap output is appropriate for a single-station setup; sites running multiple simultaneous service points or dispensing at continuously high volume may find a larger or multi-outlet unit a better match.

The MT8F is well suited to cafés, hotels, office catering operations, and contract catering environments where a self-managing hot water supply is needed without the complexity of a full boiling water system. It sits in the mid-range of what this type of equipment can handle — reliable for moderate service volumes, but not intended for the highest-throughput applications. For sites with significantly greater demand or multi-point service requirements, it is worth considering a higher-capacity option before committing.

If you would like to talk through whether the MT8F is the right fit for your setup, the team is glad to help you think it through.

The Marco Ecoboiler WMT5 is a mains-fed, wall-mounted water boiler with a 5-litre tank. It connects directly to the cold water supply, maintains a ready reservoir of boiling water, and dispenses through a no-drip tap. By sitting entirely off the worktop, it frees up counter space that a conventional kettle or countertop boiler would otherwise occupy — a practical consideration in compact kitchens and servery areas where every surface counts.

In everyday service the WMT5 handles steady, moderate demand reliably. The auto-fill design means the tank replenishes without manual intervention, so hot water remains available without staff needing to monitor or refill a vessel. It is well suited to consistent light-to-moderate use rather than high-intensity, high-turnover service periods, where a larger-capacity unit would be the more appropriate choice.

Key practical advantages include:

• Wall-mounted design keeps the worktop entirely clear
• Mains-fed auto-fill removes the need for manual topping up
• No-drip tap reduces mess and waste at the point of dispense
• Automatic thermal cut-out provides a built-in safety safeguard
• Straightforward descaling and cleaning supports ongoing hygiene

Installation requires a mains cold water connection and an electrical supply. Marco recommend hardwiring for a permanent installation, though a 13-amp supply may be suitable depending on the setup. Wall fixings must be appropriate for the surface and fully capable of supporting the filled weight of the unit. If the proposed installation point is some distance from existing plumbing, the pipework run is worth factoring into planning. In hard water areas, descaling will need to be scheduled more frequently to maintain output and extend service life.

The WMT5 is a sound fit for office kitchens, staffrooms, small cafés, breakout areas, and buffet stations where a compact, reliable source of boiling water is needed without a large footprint. For sites with higher throughput or more intensive demand, a larger-capacity wall-mounted or countertop boiler is likely to be the better fit.

If you are weighing up whether the WMT5 suits your volume or have questions about installation requirements, the team is happy to talk it through.

The Marco Ecoboiler T30 is a mains-fed, auto-fill countertop water boiler designed for commercial and workplace environments that need a reliable, continuous supply of boiling water throughout the day. Connected directly to the mains water supply, it fills and reheats automatically without manual intervention and dispenses through a single no-drip tap via straightforward electronic controls.

In practice, this type of unit suits operations running steady, moderate volumes of hot water across a service period — staff canteens, café service counters, hospitality buffet stations, and office break areas with regular footfall. The 30-litre reservoir provides a useful reserve at all times, and the auto-fill function removes the labour associated with manually refilling smaller pour-and-fill units. Sites with very high peak-hour demand — large-scale banqueting operations or busy filter coffee bars drawing heavily in short bursts — may find a higher-capacity unit better suited to their throughput.

From a day-to-day operational standpoint, the Ecoboiler T30 offers several practical advantages:

• Automatic mains feed removes the need for manual refilling during service
• No-drip tap helps maintain a clean, dry counter area
• Electronic controls are straightforward for front-of-house and non-technical staff
• Routine descaling and cleaning requires no specialist tools
• Automatic cut-out provides a safety measure in the event of a fault

Installation is relatively straightforward compared with most commercial beverage equipment. The T30 runs from a standard 13-amp plug, so no dedicated electrical circuit or electrician is required. You will need a mains cold water supply at the installation point — typically a flexi-hose connection to an existing feed. As a countertop unit, it is worth considering available surface depth, proximity to a water supply, and access to a drainage point for descaling maintenance.

This boiler is well suited to workplace catering, small café and tea bar operations, and hospitality buffet setups where reliability and ease of use take priority over very high peak throughput. If you are unsure whether the capacity fits your expected demand, or want to talk through whether a single-tap configuration works for your service layout, the team is happy to help before you go ahead.

The Marco Ecoboiler Tap T20-3 is a mains-fed countertop water boiler with a 20-litre capacity, designed for continuous hot water service without manual refilling. Connected directly to a cold mains water supply, it refills automatically and dispenses through a single no-drip tap on demand. Electronic controls manage operating temperature throughout service, and a built-in automatic cut-out provides a baseline level of safety protection. The unit runs from a standard 13-amp plug, which keeps installation requirements straightforward.

In operational terms, the auto-fill function is what sets this type of unit apart from manual-fill alternatives. Staff do not need to monitor the tank or interrupt service to top it up, which matters most during consistent, steady demand — the kind typical of office break areas, hotel buffet stations, cafeteria serveries, and smaller café counters. The 20-litre capacity handles moderate throughput well, though it is not designed for environments where large volumes are drawn simultaneously over short, concentrated windows.

From a day-to-day operational standpoint, the T20-3 offers several practical advantages:

• Auto-fill maintains hot water availability throughout service without staff intervention
• No-drip tap reduces countertop mess and waste between pours
• Electronic temperature control supports consistent beverage quality across service
• 13-amp plug connection removes the need for dedicated electrical installation
• Accessible descaling design keeps routine maintenance manageable

Installation requires a nearby mains cold water connection and a standard 13-amp socket. It is worth confirming that your site's incoming water pressure falls within the unit's inlet requirements before purchasing. In hard-water areas, descaling will need scheduling regularly to maintain performance and protect service life.

This model is a practical choice for lower-to-medium-volume hot beverage service where demand is steady rather than high-intensity. For sites with sustained peak-hour throughput or larger concurrent cover counts, a higher-capacity unit would be worth considering.

If you are unsure whether this capacity fits your service pattern, or have questions about the water connection requirements, the team is happy to talk it through before you decide.

The Marco Ecoboiler T10 is a mains-fed counter-top water boiler designed to provide a continuous supply of hot water without manual refilling. Connected directly to the cold water mains, the tank replenishes automatically throughout service, keeping hot water available whenever it is needed. A no-drip tap delivers cleanly, which is a practical detail in any setting where spills and counter mess become a frustration during a busy period.

In day-to-day use, the T10 performs well in environments where a steady, moderate flow of hot water is required across the day rather than intense back-to-back demand. Staff canteens, café counters, hotel breakfast service, and office catering points are all typical applications. It is not designed for high-throughput operations serving large volumes of covers simultaneously, but in the right setting it runs reliably without consuming significant energy or taking up meaningful counter space.

Operational advantages worth noting:

• Automatic mains fill removes the need for manual top-ups during service
• No-drip tap reduces spillage and helps keep the counter area tidy
• Electronic controls with automatic cut-out support safe, consistent operation
• Straightforward descaling process keeps routine maintenance manageable
• Strong energy efficiency credentials help keep running costs modest

Installation is straightforward. The unit runs from a standard 13-amp plug socket, so no dedicated electrical circuit or qualified electrical work is needed. A mains cold water connection is required at the point of use for the auto-fill function — it is worth confirming this is available at your service point before ordering, particularly in smaller or older premises.

The T10 is well suited to offices, small cafés, bed and breakfasts, and catering prep areas where reliable hot water is needed throughout the day. If your operation serves significantly higher volumes or requires a greater continuous reserve, a larger-capacity model would be worth considering.

If you would like to talk through whether the T10 is the right fit for your setup, the team is happy to help.

The Marco Ecoboiler T5 is a compact, mains-fed countertop water boiler designed for consistent hot water delivery in light to medium service environments. It connects directly to the cold water supply and fills automatically, maintaining temperature without any manual topping up. A single no-drip tap dispenses hot water on demand, keeping operation straightforward for any member of staff.

In practice, the T5 suits operations where demand is steady rather than intense — a café working through a morning service, a staff canteen meeting break-time demand, or a hospitality suite where guests serve themselves. It handles that kind of rolling throughput reliably without requiring close attention from the operator. For sites running continuous high-volume service, a larger-capacity boiler would be worth considering.

The day-to-day operational advantages are straightforward:

• Automatic mains fill removes manual handling and reduces the risk of running dry mid-service
• No-drip tap keeps the service counter clean during busy periods
• Adjustable electronic temperature control suits different brewing and beverage applications
• Automatic cut-out provides a safety backstop against overheating
• Accessible descaling process helps maintain output without specialist servicing

Installation is uncomplicated. The unit runs from a standard 13-amp socket and requires a mains cold water connection — typically a straightforward push-fit or BSP fitting to an existing supply. It sits on the counter with no fixed installation work or ventilation requirements. The main practical consideration before positioning the unit is proximity to a suitable water supply point.

The Ecoboiler T5 is well suited to cafés, office kitchens, hospitality suites, and smaller catering operations where reliable countertop hot water is needed but volume doesn't justify a larger boiler. If you'd like to talk through whether this capacity fits your expected service pattern, or how it sits alongside your existing beverage setup, we're happy to help you think it through.