Soap Dispensers, Wipes and Towels

The P-Wave Eco Air Dispenser is a passive, battery-free washroom freshener unit designed to deliver a continuous release of fragrance without the need for aerosols, electronics, or refillable canisters with pressurised propellants. It works by allowing air movement to carry fragrance from a compatible Eco Air Freshener cartridge (sold separately) through the dispenser housing and into the surrounding space.

In commercial washroom settings — whether in a restaurant, hotel, café, or staff welfare area — this type of passive dispenser suits environments where low-maintenance hygiene presentation matters and where staff time spent on washroom upkeep needs to be kept to a minimum. Because there are no batteries or moving parts, there is nothing to fail between service checks, and no requirement to programme or adjust the unit.

For best results, the dispenser should be positioned where air circulates freely — beside a door or on the back of it tends to work well, as door movement helps draw fragrance through the unit. It is not well suited to enclosed, still-air spaces where passive diffusion will be limited.

• No batteries, aerosols, or electrical connection required
• Low-maintenance design suited to busy commercial washrooms
• Fully recyclable unit at end of life
• Simple wall or door mounting keeps floor and surface space clear
• Compatible with P-Wave Eco Air Freshener cartridge (sold separately)

This is a straightforward, practical product for operators who want a reliable, low-intervention washroom fragrance solution. If you are specifying across multiple washrooms or looking at broader hygiene consumable requirements, the team is happy to help you work out what suits your site.

This is a pack of five 500ml foam hand sanitiser refills from Rubbermaid's Flex range, formulated without alcohol and without added fragrance. The foam formula is designed to help control the growth of microorganisms on the skin without the use of ethanol or isopropanol, making it a practical choice for sites where alcohol-based products are restricted or unsuitable.

In a commercial kitchen environment, hand hygiene compliance is a daily operational requirement rather than an occasional consideration. An alcohol-free formulation is commonly used where staff have skin sensitivities to alcohol-based products, where religious or policy restrictions apply, or where fire risk assessments flag alcohol use as a concern in specific areas. The unperfumed nature of the formula also reduces the risk of fragrance transfer to food preparation surfaces or to food itself, which is a reasonable consideration in professional kitchens.

• Alcohol-free — suitable where alcohol sanitisers are restricted or contra-indicated
• Unperfumed — minimises fragrance contamination risk near food preparation
• Foam format — helps control dosage and reduces product waste per application
• Designed for use with compatible Rubbermaid Flex dispensers
• Pack of five 500ml refills for ongoing consumable stock management

These refills are intended for use with the Rubbermaid Flex dispenser system. If you are not already running Flex dispensers on site, it is worth confirming compatibility before ordering. For sites with a high footfall requiring larger refill volumes or different formulations, other options within the range may be more appropriate.

If you are unsure which hand hygiene format best suits your site's requirements or compliance obligations, our team is happy to help you work through the options.

The Rubbermaid AutoFoam is a wall-mounted, touch-free dispenser designed to deliver foam soap or sanitiser in commercial washroom and hand-wash environments. The sensor-activated mechanism means users receive a measured foam dose without touching the unit at all, which is a straightforward and practical way to reduce cross-contamination at hand-wash points.

In a busy kitchen or food service environment, hand-wash stations see repeated use throughout every service period. A no-touch dispenser removes a common contact point from that routine, which supports hygiene compliance without relying on staff behaviour. The foam format also tends to use less product per wash than liquid soap, which contributes to lower ongoing consumable costs over time.

• Touch-free sensor activation removes a cross-contamination point at the sink
• Foam format delivers a measured dose, reducing product waste per wash
• Compatible with foam soap and sanitiser refills for flexibility of use
• Black and chrome finish suits both back-of-house and customer-facing washrooms
• Battery-powered operation requires no electrical connection at the installation point

Installation is straightforward — the unit is wall-mounted and battery-powered, so there is no requirement for an electrical supply at the fixing point. That makes positioning more flexible than wired alternatives, though it does mean factoring in battery replacement as part of routine maintenance checks. The dispenser is sized for standard commercial hand-wash stations rather than high-traffic public facilities; for very high-footfall environments, a larger-capacity unit or more frequent refill checks would be worth considering.

This dispenser is a practical choice for smaller kitchens, staff welfare areas, food preparation rooms, and front-of-house washrooms where a clean, professional appearance matters alongside basic hygiene function. It is less suited as the sole provision in very high-volume public washrooms where refill frequency would become a management burden.

If you are specifying hand hygiene stations across a larger site or want guidance on refill compatibility and consumable costs, we are happy to talk it through before you order.

This is a wall-mounted liquid soap and hand sanitiser dispenser from Jantex, finished in brushed satin stainless steel. It holds one litre of liquid product and is designed to be fixed permanently to a wall in washrooms, kitchen hand-wash stations, or front-of-house toilet facilities. The push-lever mechanism dispenses a controlled measure of soap or sanitiser with each press, helping to manage product usage over a service period.

In a commercial kitchen or food service setting, hand hygiene compliance is a day-to-day operational requirement rather than an optional extra. A fixed wall dispenser positioned close to hand-wash sinks makes it straightforward for staff to wash and sanitise hands quickly during service without handling a loose bottle. The stainless steel casing is practical in wet or high-traffic areas — it wipes clean easily and holds up well to regular use without showing wear in the way plastic alternatives often do.

• Satin stainless steel finish resists surface marking and is simple to wipe down
• Wall-mounted design keeps counters and sink areas clear
• One-litre capacity reduces how often refills are needed during a shift
• Suitable for both liquid soap and hand sanitiser
• Controlled dispensing helps reduce product waste

Installation requires wall fixings appropriate to the surface — the unit is supplied ready to mount. It suits most kitchen and washroom wall types. There are no electrical or plumbing connections required. The 900g weight when empty means standard fixings are sufficient for most surfaces, though tile or masonry installations may need appropriate anchors.

This dispenser is a practical choice for kitchens, cafés, pubs, care homes, and offices where a neat, durable hand hygiene station is needed without the cost or complexity of a more elaborate system. For very high-footfall sites needing larger-capacity dispensing, it is worth considering whether a higher-volume model would better suit the throughput.

If you are fitting out a new hand-wash station or replacing existing dispensers across multiple sites, the team are happy to talk through the options.

This is a straightforward wall-mountable centrefeed roll dispenser made from powder-coated steel. It accepts standard centrefeed rolls up to 190mm in width, dispensing paper from the centre of the roll through an opening at the base. A serrated edge allows sheets to be torn off cleanly without needing scissors or a blade.

In a commercial kitchen environment, having a reliable wiping roll dispenser within reach of prep areas, pass-throughs, or washroom stations helps keep surfaces clean and reduces the time staff spend searching for materials mid-service. The powder-coated steel construction resists grease build-up and wipes down easily, which matters in areas where hygiene standards need to be maintained consistently.

• Accepts centrefeed rolls up to 190mm wide — compatible with widely available catering-grade rolls
• Dispenses from the bottom, reducing contact with unused paper
• Serrated tear edge for quick, one-handed sheet removal
• Powder-coated steel is easy to wipe down and resistant to grease
• Simple to reload — remove the core, drop in the new roll, thread through the base

This is a compact, no-frills unit suited to kitchens, washrooms, and back-of-house areas where frequent access to wiping roll is needed. It is not designed for high-traffic front-of-house environments where a more robust or lockable dispenser may be more appropriate.

If you are fitting out multiple stations or need guidance on which dispensing solution suits your setup, feel free to get in touch with the team.

This bundle combines six tubs of Pal probe wipes with a wall-mounted bracket, giving busy kitchen teams a practical, fixed location for probe hygiene supplies. Each tub contains 200 individual wipes formulated to clean and sanitise temperature probe tips between uses, helping to prevent cross-contamination when moving between different food types or temperature checks.

In a working kitchen, probe hygiene is a routine HACCP requirement rather than an occasional task. Having wipes positioned at a consistent, accessible point — rather than loose in a drawer or stored inconsistently — helps staff build the habit into their workflow without disrupting service. The wall bracket keeps tubs orderly, reduces the risk of wipes being misplaced during a busy shift, and makes it straightforward to see at a glance when stocks need replenishing.

The wipes are effective against a broad range of pathogens commonly associated with food safety incidents, including MRSA, E.coli, Listeria, Salmonella, and most viruses and fungi. This makes them suitable for use across meat, fish, dairy, and ready-to-eat food categories where probe cross-contamination is a genuine risk.

• Practical for any kitchen operating a documented probe hygiene procedure
• Wall bracket reduces clutter and keeps wipes at point of use
• Six-tub pack reduces restocking frequency in higher-volume sites

This bundle is well suited to kitchens of any size operating under HACCP controls. If your site goes through probe wipes at a particularly high rate, it is worth speaking with us about larger or more frequent supply arrangements.

This wall bracket is designed specifically for use with the Hygiplas DF107 Pal TX Disinfectant Probe Wipes tub. It provides a fixed mounting point for the 200-wipe container, keeping it accessible at the point of use rather than loose on a worktop or stored away in a drawer.

In a working kitchen, probe hygiene is a routine part of temperature monitoring, and having wipes mounted where they are actually needed — near the probe, near the pass, or at a prep station — makes it easier for staff to follow correct cleaning procedures consistently. A bracket that keeps the tub stable and visible removes a small but real friction point from the workflow.

Installation is straightforward. The bracket mounts to a wall surface and holds the DF107 wipe tub securely. It is worth confirming your wall surface and fixings are appropriate before fitting, particularly in tiled or stainless-clad areas where drilling may require additional consideration.

This bracket is compatible only with the Hygiplas DF107 Pal TX Disinfectant Probe Wipes tub. It will not suit other wipe formats or containers. If you are setting up probe hygiene stations across multiple kitchen sections, it is worth planning bracket placement alongside your temperature monitoring routine to get the most from it.

If you are unsure how this fits into your wider food safety or cleaning setup, we are happy to help you think it through.

These food probe wipes are formulated without alcohol or quaternary ammonium compounds (quats), making them suitable for sanitising temperature probes and similar food-contact equipment without the risk of tainting food or leaving chemical residues. They are tested to BS EN 13727, BS EN 1276, and BS EN 1438, confirming bactericidal efficacy to recognised European standards.

In a working kitchen, probes move between raw and cooked foods, between different proteins, and across service periods — and they need to be cleaned quickly between uses without interrupting flow. Because these wipes are non-tainting, operators can sanitise a probe and return it to food immediately, which matters in any kitchen running a busy service. Their alcohol-free composition also makes them a practical choice for Halal-certified and alcohol-restricted environments where solvent-based products are not appropriate.

The wipes are supplied in a resealable tub that keeps unused wipes moist and protected between services. Key practical points:

• Non-tainting formula safe for direct food-contact use after wiping
• Suitable for use in Halal and alcohol-restricted environments
• Meets BS EN 1276 and BS EN 13727 bactericidal test standards
• Resealable tub prevents wipes drying out between services
• 200 wipes per tub provides good stock depth for busy sites

These wipes are well suited to any operation that requires documented probe hygiene — restaurants, catering operations, care homes, and food production environments. For very high-volume sites processing large quantities of probes throughout the day, it is worth considering how quickly a single tub will be consumed and whether keeping a second tub in reserve makes sense operationally.

If you are unsure whether these wipes are the right fit for your specific hygiene protocol or certification requirements, the team is happy to help you think it through.

The Tork Reflex Portable Centrefeed Dispenser is a handheld dispensing unit designed to hold and feed centrefeed paper rolls for cleaning tasks across a commercial kitchen or food service environment. The fully enclosed housing protects the roll from contamination between uses, and the dispenser feeds paper sheet by sheet rather than allowing free-pull, which helps control consumption over the course of a busy service.

In a working kitchen, paper waste can quietly add up. Having an unprotected centrefeed roll sitting on a worktop or prep area exposes it to moisture, grease, and cross-contamination. The enclosed design here addresses that directly — the roll stays protected inside the casing, and only the sheet being used comes into contact with hands or surfaces. The built-in paper-level indicator is a small but practical detail, helping kitchen staff restock before the roll runs out mid-clean rather than discovering it at the wrong moment.

The portable format is well suited to kitchens where cleaning tasks move around — wipe-downs across multiple prep stations, back-of-house mopping up, or front-of-house spillage response. Key practical points:

• Sheet-by-sheet dispensing reduces paper use compared to free-pull rolls
• Enclosed casing protects the roll from contamination and moisture
• Carry handle allows use on the move across different areas
• Low-stock indicator supports timely roll replacement
• Compatible with Tork Reflex centrefeed rolls (Y040 range)

This is a straightforward, low-cost addition to any commercial cleaning setup. It is best suited to smaller operations or as a supplementary unit alongside fixed wall-mounted dispensers in larger sites. If you have questions about fitting this into a wider hygiene or cleaning consumables setup, the team is happy to advise.

These lemon-scented hand wipes from eGreen are a practical hygiene solution for catering environments where guests or staff need to clean their hands quickly without access to a sink. The larger wipe size makes them well suited to messier situations — particularly after handling food such as ribs, prawns, or other finger foods where a standard wipe would fall short.

In a front-of-house or casual dining setting, having a ready supply of hand wipes at the table or service station helps maintain hygiene standards without disrupting service flow. They are equally useful backstage in a prep kitchen where a quick hand clean is needed between tasks. A pack of 500 provides a reasonable stock level for busy services without requiring constant reordering.

• Lemon scented for a clean, fresh finish
• Larger wipe size suitable for thorough hand cleaning
• Compact packaging — easy to store and dispense from a counter or station
• Suitable for front-of-house table service or kitchen-side use
• Single-use format supports hygiene compliance in food environments

If you serve a high volume of covers or run regular events involving finger food menus, it is worth considering how many wipes per cover you typically use, as consumption can add up quickly. For lower-volume operations a smaller pack size may reduce waste.

If you are unsure which pack size or product format best suits your service style, the team is happy to help you work it out.

These lemon-scented disposable hand wipes from eGreen are a practical front-of-house consumable, commonly used at the table or pass after guests have eaten finger foods, shellfish, ribs, or similar dishes. Each pack contains 1000 individually usable wipes, making them a straightforward stock item for busy hospitality operations.

For kitchens and venues that serve messy or hands-on dishes, having a reliable supply of freshening wipes reduces the demand on washroom facilities and keeps service moving. The lemon scent helps neutralise strong food odours, which is particularly useful after prawn or seafood courses.

• Lemon scented to help neutralise food odours after eating
• 1000 wipes per pack for extended supply without frequent reordering
• Suitable for table service, buffet, and casual dining settings
• Compact pack size — straightforward to store in a service station or back-of-house cupboard

These wipes are a simple, low-cost consumable rather than a technical purchase, but if you have questions about quantities or want to discuss hygiene consumables more broadly for your operation, the team is happy to help.

Regina Blitz is a three-ply kitchen towel roll designed for general-purpose cleaning tasks in commercial and workplace environments. Each roll contains 280 sheets with a roll length of 22.4 metres, and the pack contains four rolls. The sheets are noticeably larger than a standard kitchen roll, which makes them more practical for wiping down surfaces, mopping up spills, and general hygiene tasks without needing to use multiple sheets at once.

In a working kitchen environment, a reliable paper towel that absorbs well and holds together under use saves time and reduces waste. The three-ply construction gives the sheet enough body to handle wet surfaces and light-duty cleaning without tearing mid-task — a common frustration with thinner single-ply alternatives.

• Three-ply construction resists tearing during wet cleaning tasks
• Larger sheet size reduces the number of sheets needed per task
• Suitable for surface wiping, spill absorption, and general hygiene use
• Pack of four rolls provides a practical stock quantity for busy sites

These are household-grade rolls rather than commercial centrefeed or industrial wiper products, so they are best suited to back-of-house areas, staff facilities, front-of-house prep stations, or low-intensity cleaning tasks. Sites with very high daily towel usage — such as large production kitchens — may find a commercial centrefeed dispenser system more cost-effective in the long run.

If you are unsure which paper hygiene products are the right fit for your site's throughput, we are happy to help you work that out.

This sanitary bag dispenser is a compact, wall-mounted unit designed to provide discreet disposal provision in staff washrooms, customer toilets, and changing facilities. Made from ABS plastic in a plain white finish, it is a straightforward, no-frills fitting that serves a practical hygiene function in commercial and hospitality environments.

In day-to-day use, the unit requires minimal attention. Bags are dispensed individually from a flush-fronted housing, keeping the contents out of sight and maintaining a tidy appearance in the washroom. The slim profile means it fits comfortably in confined spaces without intruding on the user area.

Practical points worth noting:

• Slim ABS housing sits close to the wall, suitable for compact washroom spaces
• White finish suits standard washroom fittings and is easy to wipe clean
• Lightweight construction makes installation and repositioning straightforward
• Designed for individual bag dispensing, keeping provision tidy and controlled
• Compatible with standard sanitary disposal bags

Installation is simple — the unit mounts directly to a wall surface and requires no pipework, power, or specialist fitting. It is best positioned at a comfortable reach height within a cubicle or adjacent to a sanitary disposal unit. The lightweight ABS construction means standard fixings are sufficient for most wall surfaces, though tiled or rendered walls may need appropriate anchors.

This dispenser is well suited to staff welfare facilities, hotel guest bathrooms, restaurant and café toilets, and similar settings where a neat, low-maintenance hygiene provision is required. It is a single-use bag dispenser rather than a full sanitary disposal unit — operators requiring a combined solution should consider a matched disposal bin alongside.

If you are fitting out a number of washrooms or want to confirm the right combination of hygiene fittings for your site, the team is happy to help you work through the options.