Drawer menu
-
Cooking
-
Refrigeration
-
Food Preparation
-
Food Servery & Display
-
Beverage Machines
-
Warewashing & Laundry
-
Sinks, Tables & Storage
-
-
Parry
Parry Stainless Steel Sink Unit with Single Drainer & Boiler
£1,525.00(£1,830.00 inc VAT)
Delivery Information
Price Match
This Parry unit combines a single-bowl stainless steel sink and drainer with a factory-fitted integrated water heater. Hot and cold pipework is pre-plumbed before delivery, so on-site installation comes down to connecting a cold water supply, running a standard waste outlet, and plugging the boiler into a 13-amp socket. There is no need for a dedicated hot water feed or a hard-wired electrical connection — an arrangement that makes this unit considerably more straightforward to install than a conventionally plumbed sink in many commercial settings.
In service, the unit is well matched to light-to-moderate handwashing and food preparation tasks. The point-of-use boiler is particularly practical where the building's main hot water supply is remote or inconsistent, as it removes the wait and the heat loss associated with long pipe runs. Recovery between draws is reasonable for the intended workload, but in areas with near-continuous hot water demand — a busy prep kitchen running flat-out during service, for instance — a unit with a larger or separately heated water source would be worth considering.
Practical operational advantages include:
- Self-contained hot and cold supply removes the need for a separate hot water run
- Plug-in boiler reduces on-site plumbing time and associated installation costs
- Bottom shelf provides accessible dry storage close to the work area
- Adjustable feet allow levelling on uneven or slightly irregular kitchen floors
- Stainless steel construction throughout supports routine cleaning and hygiene compliance
Because the unit connects to a standard cold water inlet and drains to a conventional waste outlet, it can be repositioned with relatively little disruption — useful for temporary catering setups, event kitchens, or sites where the layout is likely to evolve. Any relocation still requires a cold water connection, a suitable waste run, and a 13-amp socket in the new position.
This unit is well suited to small cafés, staff canteens, pop-up and event catering operations, and supplementary wash stations where a full plumbed installation is impractical or cost-prohibitive. It is not the right choice as the sole sink in a high-throughput kitchen with sustained, heavy hot water demand. For those environments, a conventionally plumbed sink with a larger water heater or a direct commercial boiler feed would serve better.
If you are unsure whether this unit will match your site's water supply arrangement or expected service volume, we are happy to talk through the specifics before you decide.
Frequently asked questions
Is this unit suitable as the only sink in a busy commercial kitchen?
For light-to-moderate use — a small café, a staff canteen, or a supplementary wash point — it performs well. In a high-throughput kitchen with continuous heavy hot water demand, the integrated boiler may not recover quickly enough to keep pace, and a conventionally plumbed sink with a larger water heater would be a more reliable choice.
What does installation actually involve on site?
The hot and cold pipework is pre-fitted at the factory, so the on-site requirements are straightforward: a cold water inlet connection, a standard waste outlet for drainage, and a 13-amp socket for the boiler. No hard-wired electrical work and no separate hot water feed are needed, which keeps installation time and cost to a minimum.
Can this unit be used in a temporary or event catering environment?
Yes — the self-contained design and relatively simple connection requirements make it a practical option for event kitchens, pop-up operations, and sites where the layout may change. Bear in mind that any new position will still need a cold water supply, a suitable waste run, and a 13-amp socket nearby.
£1,525.00(£1,830.00 inc VAT)
£1,525.00(£1,830.00 inc VAT)
This Parry unit combines a single-bowl stainless steel sink and drainer with a factory-fitted integrated water heater. Hot and cold pipework is pre-plumbed before delivery, so on-site installation comes down to connecting a cold water supply, running a standard waste outlet, and plugging the boiler into a 13-amp socket. There is no need for a dedicated hot water feed or a hard-wired electrical connection — an arrangement that makes this unit considerably more straightforward to install than a conventionally plumbed sink in many commercial settings.
In service, the unit is well matched to light-to-moderate handwashing and food preparation tasks. The point-of-use boiler is particularly practical where the building's main hot water supply is remote or inconsistent, as it removes the wait and the heat loss associated with long pipe runs. Recovery between draws is reasonable for the intended workload, but in areas with near-continuous hot water demand — a busy prep kitchen running flat-out during service, for instance — a unit with a larger or separately heated water source would be worth considering.
Practical operational advantages include:
- Self-contained hot and cold supply removes the need for a separate hot water run
- Plug-in boiler reduces on-site plumbing time and associated installation costs
- Bottom shelf provides accessible dry storage close to the work area
- Adjustable feet allow levelling on uneven or slightly irregular kitchen floors
- Stainless steel construction throughout supports routine cleaning and hygiene compliance
Because the unit connects to a standard cold water inlet and drains to a conventional waste outlet, it can be repositioned with relatively little disruption — useful for temporary catering setups, event kitchens, or sites where the layout is likely to evolve. Any relocation still requires a cold water connection, a suitable waste run, and a 13-amp socket in the new position.
This unit is well suited to small cafés, staff canteens, pop-up and event catering operations, and supplementary wash stations where a full plumbed installation is impractical or cost-prohibitive. It is not the right choice as the sole sink in a high-throughput kitchen with sustained, heavy hot water demand. For those environments, a conventionally plumbed sink with a larger water heater or a direct commercial boiler feed would serve better.
If you are unsure whether this unit will match your site's water supply arrangement or expected service volume, we are happy to talk through the specifics before you decide.
- Choosing a selection results in a full page refresh.
- Opens in a new window.