Tork

Tork jumbo toilet rolls are a practical consumable choice for commercial washrooms in hospitality and catering environments. Each roll provides a substantial length of 2-ply tissue, designed to reduce the frequency of changeovers in busy facilities — a straightforward advantage when washroom attendant time is limited during peak service periods.

In high-footfall settings such as restaurant toilets, hotel washrooms, bar facilities, and café conveniences, roll longevity matters. A roll that runs out quickly creates a poor guest experience and increases the workload for front-of-house or housekeeping staff. These Tork rolls are well suited to dispensers designed for jumbo-format rolls, which help manage controlled dispensing and reduce waste compared to standard interleaved or conventional roll formats.

• 2-ply tissue for adequate softness in a guest-facing environment
• Long roll length reduces changeover frequency during busy service
• Suitable for jumbo-format toilet roll dispensers
• Pack of 6 rolls for straightforward stock management
• White tissue appropriate for commercial and public washroom use

These rolls require a compatible jumbo toilet roll dispenser — they are not suitable for standard domestic-style holders. If you are fitting out a new washroom or sourcing dispensers alongside consumables, it is worth confirming compatibility before ordering in volume.

This product is well suited to restaurants, cafés, bars, hotels, and similar hospitality venues with moderate to high washroom usage. For very high-volume sites such as event venues or large hotel properties, it is worth considering whether a higher-capacity dispenser system or a different roll format would better suit your throughput requirements.

If you are unsure about quantities, dispenser compatibility, or the right consumable format for your washroom setup, the team is happy to help you work through it.

The Tork Reflex Single Sheet Dispenser is a wall-mounted centrefeed roll dispenser designed to control paper consumption in commercial kitchens, food preparation areas, and service environments. Rather than allowing users to pull freely from a roll, it releases one sheet at a time through a controlled dispensing mechanism, which in practice means significantly less roll wasted per use.

In busy kitchen environments, paper towel waste tends to be high simply because rolls are accessible and staff pull more than they need. A controlled dispenser addresses this directly without requiring any change in behaviour from the team — the mechanism does the work. Over a full service shift, the reduction in consumption adds up, which is particularly relevant in high-footfall kitchens where rolls turn over quickly.

From an operational standpoint, the practical advantages are straightforward:

• Single-sheet dispensing reduces unnecessary paper use during busy service periods
• Wall-mounted design keeps counters and prep surfaces clear
• Compact footprint suits kitchens where wall space is limited
• Lightweight plastic construction is easy to install and maintain
• Compatible with Tork Reflex centrefeed rolls for reliable refilling

Installation is straightforward — the unit mounts directly to a wall and takes up minimal space. At 1.32kg it is easy to position and reposition if needed. There are no electrical or plumbing requirements. It is worth confirming roll compatibility before ordering; this dispenser is designed for use with compatible Tork Reflex centrefeed rolls rather than standard open rolls.

This dispenser is well suited to commercial kitchens, food preparation areas, staff washrooms, and front-of-house cleaning stations where waste reduction and hygiene are both priorities. It is a practical fit for catering operations of most sizes, from small kitchens to larger multi-station environments.

If you are equipping multiple stations or want to confirm roll compatibility for your current stock, the team are happy to help you work through the options.

The Tork Matic hand towel roll dispenser is a wall-mounted unit designed for commercial washrooms, staff facilities, and food-safe hand-drying areas. It accepts Matic-format roll towels and dispenses a set length per pull, which is the key distinction from open-roll or folded-towel systems. The plastic housing is lightweight and straightforward to install on most wall surfaces.

In practice, the controlled dispensing mechanism does the work that open dispensers cannot — it limits how much towel is taken per use, which meaningfully reduces paper consumption over time. In busy washrooms serving kitchen staff, front-of-house teams, or the public, that reduction adds up across a full week of service. The unit is also enclosed, so the roll stays protected from moisture and contamination between uses, which matters in food-service environments where hygiene standards are closely observed.

• Controlled one-at-a-time dispensing reduces unnecessary paper waste
• Enclosed housing protects the roll from moisture and airborne contamination
• Compatible with the Tork Matic refill system for straightforward restocking
• Smooth plastic surfaces are easy to wipe down during routine cleaning
• Wall-mounted design keeps floor and counter space clear

Installation is straightforward — the unit wall-mounts via a backplate and requires no power or plumbing. Placement height and proximity to sinks are worth considering during fitting to meet food hygiene guidance. The plastic construction keeps the unit light, though in very high-traffic washrooms a stainless-fronted alternative may offer longer-term durability.

This dispenser is well suited to small and medium commercial kitchens, cafés, pub washrooms, and staff welfare areas where a reliable, hygienic hand-drying solution is needed without the complexity of sensor-operated units. For very high-footfall sites, it is worth considering a larger-capacity or more heavy-duty dispenser to reduce refill frequency.

If you are fitting out a washroom or welfare area and are unsure which dispenser format best fits your setup, our team is happy to talk it through.

This is a six-bottle case of Tork mildly scented foam hand soap, designed for use with Tork S4 wall-mounted foam soap dispensers. The foam format delivers a measured dose each time the dispenser is activated, helping to control consumption and reduce waste compared with liquid soap dispensed without a fixed portion.

Each one-litre bottle yields up to 2,500 doses, making the case a practical stock unit for busy washrooms in commercial kitchens, food preparation areas, front-of-house facilities, and staff welfare rooms. The mild formulation is designed to be gentle on hands with repeated use throughout a shift, which matters in environments where staff are washing hands frequently as part of food hygiene practice.

• Foam format reduces soap consumption per wash versus conventional liquid soap
• Mild, conditioned formulation suited to frequent use during service
• Each bottle delivers up to 2,500 doses before replacement is needed
• Compatible with Tork S4 foam soap dispensers
• Case of six simplifies stock management and reduces reorder frequency

These refills are only compatible with Tork S4 foam soap dispensers and will not work with standard liquid soap dispensers or dispensers from other system ranges. It is worth confirming your existing dispenser model before ordering to avoid incompatibility.

Well suited to catering operations, hospitality venues, and food production sites where a reliable, hygienic handwashing consumable is needed day to day. If you are equipping a new washroom or are unsure which dispenser system is the right fit for your site, our team is happy to point you in the right direction.

Tork PeakServe Continuous Hand Towels are a 1-ply paper hand towel designed specifically for washrooms that see sustained, heavy footfall. They are intended for use with compatible Tork H5 PeakServe dispensers and work on a continuous bundle system that allows refilling without interrupting service — a practical advantage in kitchens and hospitality environments where staff cannot afford extended downtime at the sink station.

The continuous format means towels feed one at a time without bunching or jamming, which helps reduce waste compared with traditional interfolded or roll systems. Because each bundle connects to the next, there is no gap in dispensing between refills, so users are not left waiting and staff are not called to the dispenser unnecessarily. The higher sheet count per load means fewer refill checks are needed across a shift, which frees up a small but real amount of staff time in busy periods.

Practical advantages for commercial washroom use include:

• Continuous bundle system prevents dispensing gaps between refills
• One-at-a-time feed limits over-pulling and reduces towel waste
• Higher capacity per load reduces frequency of staff refill checks
• Compatible with Tork H5 PeakServe dispensers for controlled dispensing
• 1-ply white sheet suitable for standard commercial washroom use

These towels are well suited to staff washrooms in commercial kitchens, pub and restaurant back-of-house areas, and any facility where hand-drying provision needs to remain reliable throughout a full service. They are not a standalone product — a compatible PeakServe dispenser is required, and it is worth confirming compatibility before ordering if you are replacing an existing dispenser system.

If you are unsure which dispenser or towel format best suits your site's footfall and layout, the team is happy to help you work through the options.

Tork Xpress H2 Soft Multifold Hand Towels are a 2-ply recycled-fibre paper towel designed for commercial washroom use. The natural light brown colour results from the use of recycled cardboard as a fibre source, with no dyes added during manufacture. They are supplied in a case of 21 packs, providing a practical bulk quantity for busy sites.

In practice, these towels are well suited to moderate- to high-footfall washrooms in catering environments — staff areas, customer-facing toilet facilities, and back-of-house hand-washing stations. The multifold format folds flat for compact storage and dispenses cleanly without tearing, which helps keep washroom areas tidy during busy service periods.

Where these towels offer the most operational benefit is when used alongside the compatible Tork Xpress dispensers. Single-sheet dispensing keeps consumption controlled, which has a measurable effect on running costs over time — particularly relevant in kitchens where hand-washing frequency is high. Key practical points include:

• 2-ply construction provides a reasonable balance of softness and strength
• Compatible with Tork Xpress dispensers for controlled single-sheet dispensing
• No added dyes, supporting lower environmental impact
• Bulk pack format reduces restocking frequency
• Multifold format stores efficiently in standard dispenser housings

These towels are best suited to catering businesses that already use or are planning to install Tork Xpress H2 dispensers. If your site uses a different dispenser format, it is worth confirming compatibility before ordering in bulk.

If you are fitting out a new washroom facility or reviewing your disposables spend, we are happy to help you assess which towel format and dispenser combination makes the most sense for your site.

These Tork Advanced T2 mini jumbo toilet rolls are a practical choice for commercial washrooms handling steady footfall throughout the day. Each roll holds significantly more tissue than a standard toilet roll, which means less frequent dispenser refilling — a straightforward operational saving for facilities and cleaning staff in busy venues.

The 2-ply tissue is perforated to help users take a consistent sheet length, which tends to reduce unnecessary waste compared with unperforated rolls. The natural light brown colouration comes from using recycled cardboard fibre as a raw material source, with no dyes added during manufacture — a consideration for operators with sustainability commitments or hygiene-conscious procurement policies.

These rolls are designed for use with compatible mini jumbo roll dispensers. Using the correct dispenser is important: it controls sheet dispensing, protects the roll from contamination, and helps prevent bulk removal. If you do not already have compatible dispensers in place, it is worth factoring that into your order.

For high-traffic sites such as large event venues, motorway services, or stadium facilities, higher-capacity jumbo roll formats may be worth considering. For lower-traffic or smaller washrooms, standard rolls may be more cost-effective. This T2 mini jumbo format tends to suit mid-range commercial sites well — offices, restaurants, hotels, and similar premises where washroom footfall is consistent but not extreme.

If you are reviewing washroom consumables across a site or fitting out multiple facilities, the team is happy to help you work through quantities and dispenser compatibility before you commit to an order.

The Tork OptiServe Coreless Toilet Paper is a 2-ply, tubeless toilet roll designed for busy commercial washrooms where reliability, waste reduction, and consistent supply matter. Made from 100% recycled fibre, each roll is manufactured without a cardboard core or outer wrap, which means less packaging waste and more usable paper per roll compared to conventional alternatives.

In practice, coreless rolls are well suited to high-footfall environments — hospitality venues, contract catering facilities, office buildings, and leisure sites — where frequent restocking is disruptive and running out mid-service is not an option. The higher sheet count per roll reduces how often staff need to replace rolls, which helps maintain washroom standards during busy periods without constant attention.

• Coreless design eliminates cardboard waste and reduces storage volume
• 2-ply recycled fibre construction suitable for commercial washroom use
• Higher capacity per roll compared to standard conventional rolls
• Compatible with a range of coreless OptiServe dispensers across a facility
• Consistent performance across multiple washroom locations from the same refill format

These rolls are designed to fit the Tork OptiServe dispenser system (sold separately). Before ordering, it is worth confirming that your existing dispensers are compatible with the T7 coreless format, as mixing roll types across different dispenser systems can cause feed issues. If you are fitting dispensers from scratch, using a matched system from the outset simplifies ordering and maintenance.

This pack is a practical choice for operators looking to standardise their washroom consumables across a site. For very high-volume locations such as stadium facilities or large event venues, it is worth considering whether a higher-capacity roll format would better suit your throughput requirements.

If you are unsure which dispenser system or roll format is right for your site, we are happy to help you work through the options.

Tork Matic H1 paper hand towel rolls are a practical consumable for commercial washrooms in catering and hospitality environments. Made from 100% recycled fibre, the natural light brown colour is a result of the recycled material source rather than added dyes, which suits operators who prefer a straightforward, no-additives product.

These rolls are designed to work with the Tork Matic hand towel dispenser system, which delivers one sheet at a time. In busy washroom settings — such as those found in restaurant back-of-house areas, staff facilities, or customer-facing amenities — controlled dispensing helps reduce unnecessary waste and keeps consumption predictable across a shift.

From a practical standpoint, the benefits are straightforward:

• One-at-a-time dispensing limits over-use and reduces how often rolls need replacing
• Long roll length means less frequent changeovers in high-footfall washrooms
• 2-ply construction provides adequate absorbency for thorough hand drying
• 100% recycled fibre content supports sustainability policies without additional effort
• Compatible with the Tork Matic dispenser system for controlled, hygienic dispensing

These rolls are only compatible with the Tork Matic H1 dispenser — they will not fit standard open-roll or centre-pull holders. If you are not already using Tork Matic dispensers, it is worth confirming compatibility before ordering in volume.

Well suited to medium- and high-traffic commercial washrooms in restaurants, hotels, cafés, and workplace catering facilities. For very high-volume sites requiring larger roll formats or alternative dispenser systems, other options within the Tork range may be more appropriate.

If you are unsure which dispenser system or roll format best suits your site, we are happy to help you work that out before you commit to a quantity.

The Tork OptiServe T7 is a wall-mounted, two-roll coreless toilet paper dispenser designed for commercial and public washrooms where throughput and hygiene standards need to be consistently maintained. Unlike conventional dispensers that use cored rolls or jumbo rolls with protective wrap, the OptiServe system uses compact coreless rolls that eliminate the inner tube entirely, reducing both material waste and the storage footprint required to keep washrooms stocked.

In practice, the coreless format means each roll holds significantly more paper than a standard toilet roll of the same outer diameter, which matters in facilities that see steady footfall throughout the day. The two-roll capacity allows automatic transfer from the reserve roll to the active position without any manual intervention from cleaning staff — a straightforward feature that helps avoid the common problem of dispensers running empty between service checks.

From an operational standpoint, the design offers several practical advantages for facilities managers and cleaning teams:

• Touchless automatic roll transfer reduces cross-contamination risk at the dispenser
• Easy-to-locate paper tail means users do not need to reach inside the housing
• Coreless rolls take up less storage space than equivalent conventional stock
• Consistent dispensing reduces overuse and paper waste per visit
• White finish suits standard commercial washroom environments

Installation is straightforward — the unit wall-mounts in place of or alongside existing dispensers and requires no electrical connection. Compatibility is limited to Tork T7 coreless refills, so it is worth confirming your ongoing consumables supply before committing to a full-facility rollout across multiple cubicles or sites.

This dispenser is well suited to office buildings, leisure facilities, healthcare environments, and hospitality venues with moderate to high washroom traffic. For very high-volume or 24-hour sites, a higher-capacity format may be worth considering.

If you are specifying dispensers across a larger facility or want to confirm compatibility with your current Tork consumables range, we are happy to help you work through the options.

The Tork OptiServe Coreless Toilet Paper is a 2-ply, tubeless washroom tissue designed for high-traffic commercial facilities. Made from 100% recycled fibre, each roll contains 820 sheets and is supplied in cases of 24. The coreless format means there is no inner tube and no outer wrap, which reduces waste at the point of disposal and simplifies stock handling.

In busy washroom environments — staff facilities, visitor-facing toilets in hotels, leisure centres, or large food service operations — roll changeovers are a constant drain on time. The high sheet count per roll means dispensers need replenishing far less often than with standard toilet rolls or conventional jumbo formats, which helps keep maintenance rounds practical and reduces the risk of dispensers running empty during peak periods.

• Coreless design eliminates cardboard core waste and reduces storage bulk
• High sheet count per roll reduces the frequency of dispenser replenishment
• 2-ply recycled fibre construction meets sustainability requirements for many operators
• Compact roll profile allows more rolls to be stored in the same space as conventional formats
• Compatible with a range of OptiServe coreless dispensers for consistent use across a facility

These rolls are designed to fit the Tork OptiServe coreless dispenser system. The dispenser itself is sold separately — it is worth confirming compatibility with your existing dispensers before ordering, particularly if you are mixing this format with other Tork tissue systems already in use on site.

This product suits facilities with moderate to high washroom footfall where minimising maintenance time and reducing waste are operational priorities. For very high-volume sites or locations with significant daily footfall, it is worth considering whether a higher-capacity format or a different dispenser configuration would better match demand.

If you are unsure whether this format is the right fit for your washroom setup, we are happy to talk it through.

Tork Extra Soft Premium Toilet Rolls are a 3-ply tissue product supplied in a bulk pack of 36 rolls, intended for commercial washrooms in hospitality, catering, and similar environments. Each roll provides a reasonable sheet count per roll, making the pack practical for sites that go through toilet tissue at volume and need to manage restocking sensibly.

In a busy hospitality or catering setting, washroom consumables often go unmanaged until there's a problem. Buying in bulk helps keep stock levels consistent and reduces the frequency of reorders, which is a straightforward operational benefit for anyone running a hotel, restaurant, pub, or events venue.

• 3-ply construction offers a soft, resilient sheet that holds up in use
• Compatible with standard toilet roll dispensers — no proprietary hardware required
• Bulk 36-roll pack reduces restocking frequency on busy sites
• Suitable for both septic tank and mains drainage systems
• Presented at a quality level appropriate for guest-facing washrooms

There are no special installation requirements. The rolls fit standard toilet roll holders and dispensers without modification, which makes them straightforward to introduce into an existing washroom setup. If your site uses lockable dispensers, check the roll diameter against your dispenser specifications before ordering in quantity.

This pack is well suited to small and mid-sized hospitality operations looking for a reliable, guest-appropriate tissue without moving to a dispensing system. Higher-volume sites — such as large event venues or hotels with significant footfall — may find a jumbo roll or controlled-dispense system more cost-effective over time. If you're unsure which consumable format makes the most sense for your washroom setup or footfall levels, the team is happy to help you think it through.

Tork Xpressnap Extra Soft napkins are 2-ply, Z-fold dispenser napkins designed for use with Tork Xpressnap tabletop dispensers. They are a straightforward consumable — the kind of product that needs to work reliably every service without drawing attention to itself.

The Z-fold format is designed to work with Xpressnap dispensers, which deliver one napkin at a time. This one-at-a-time dispensing approach is a practical consideration for busy front-of-house environments, as it tends to reduce the amount of napkins taken unnecessarily, which over time can make a meaningful difference to consumable costs in high-footfall settings.

The extra soft 2-ply construction is suited to environments where presentation matters — casual dining, café service, or any operation where a higher-quality napkin reflects well on the overall guest experience. They are white, which suits most table settings.

As a pack of 8, this listing is well suited to operators who want to keep stock levels manageable without committing to bulk pallet quantities. For higher-volume sites running multiple dispensers, larger case quantities are likely to be more practical and cost-efficient.

If you are setting up Xpressnap dispensers across a site for the first time and want guidance on quantities or dispenser placement, feel free to get in touch with the team.

The Tork Xpressnap Fit is a compact tabletop napkin dispenser designed for front-of-house use in quick service restaurants, cafés, food trucks, and snack bars. It sits on counters or tables and dispenses napkins one at a time, keeping the napkin supply tidy and accessible for customers throughout service.

In busy front-of-house environments, napkin waste is a quiet but persistent cost. The one-at-a-time dispensing mechanism means guests take what they need rather than pulling out a handful, which noticeably reduces over-consumption during peak periods. The built-in refill indicator lets staff know when stock is running low without needing to check each unit individually, which helps maintain consistent table presentation across a busy floor.

• One-at-a-time dispensing reduces napkin waste and running costs
• Refill indicator supports efficient floor checks during service
• Compact footprint suits tables, counters, and self-service points
• Designed for the Tork N14 napkin system for reliable compatibility
• Black finish suits a wide range of front-of-house aesthetics

This dispenser is a practical fit for the N14 napkin format and is best suited to lower-to-medium-volume covers where tabletop placement is preferred. For higher-volume sites or wall-mounted installations, other configurations within the Xpressnap range may be worth considering.

If you are specifying dispensers across multiple tables or service points and want to make sure you are ordering the right napkin format to match, the team is happy to help you work through the quantities before you order.

The Tork Xpressnap N4 is a tabletop napkin dispenser designed for front-of-house use in limited-service and casual dining restaurants. It sits directly on the table or counter, presenting napkins to diners without the need for staff to replenish napkin holders between covers.

The dispenser operates on a one-at-a-time system, meaning each pull releases a single napkin rather than allowing diners to take a handful. In practice this significantly reduces unnecessary consumption, which over the course of a busy service adds up to a meaningful reduction in napkin spend. The refill level indicator helps front-of-house staff spot when stock is running low without needing to check every unit by hand — a small but useful time-saver during peak periods.

From a hygiene standpoint, the one-at-a-time mechanism means diners only handle the napkin they are going to use, with minimal contact with the dispenser mechanism itself. This makes it a sensible choice for operators who want to maintain reasonable hygiene standards at the table without moving to individually wrapped napkins.

• Reduces napkin consumption compared to open holders or fan-folded table dispensers
• Compact footprint suits small table settings without dominating the surface
• Black finish suits a range of contemporary restaurant interiors
• Refill indicator reduces unnecessary checks by front-of-house staff
• Compatible with Tork Xpressnap N4 napkin range

This dispenser is well suited to cafés, quick-service restaurants, food courts, and casual dining operations where napkins are placed on tables rather than handed out by staff. It is worth confirming compatibility with your current or intended napkin stock before ordering, as the unit is designed specifically for the Xpressnap N4 format.

If you would like to discuss napkin formats, dispenser placement, or quantities for a fit-out or ongoing supply, the team is happy to help.

Tork Xpressnap N4 napkins are single-ply white dispenser napkins supplied in a 9000-pack, designed specifically for use with Tork Xpressnap tabletop and countertop dispensers. Unlike loose or fan-fold napkins, they are engineered to feed one at a time, which is the basis of their practical appeal in busy food service environments.

The key operational advantage is waste reduction. In self-service areas — canteens, fast casual restaurants, cafés, and food courts — customers routinely take more napkins than they need when pulling from a traditional dispenser. The Xpressnap system controls dispensing so that one napkin is presented at a time, which consistently reduces over-consumption. This translates directly into lower stock usage and less frequent refilling, both of which have a real effect on running costs and staff time over the course of a week.

• One-at-a-time dispensing reduces unnecessary over-pulling in self-service settings
• Compatible with Tork Xpressnap dispensers including FS374, HX966, and DB465
• High-pack quantity suits sites that go through volume, reducing order frequency
• White, single-ply format suits most casual dining and café environments
• Consistent napkin presentation supports a tidy, well-maintained front-of-house appearance

These napkins are straightforward to load and the large pack size means less frequent replenishment for sites ordering regularly. They are well suited to canteen operators, coffee shops, casual dining, and any site running Tork Xpressnap dispensers as part of their standard setup. For operations requiring a heavier-weight or embossed napkin, Tork offers alternative formats within the Xpressnap range.

If you are setting up Xpressnap dispensers for the first time or want to confirm which napkin format best suits your service style, we are happy to help you work through the options.

Tork Xpressnap N4 napkins are 1-ply dispenser napkins designed specifically for use with Tork Xpressnap tabletop and freestanding dispensers. Supplied in a natural unbleached finish, they are a practical consumable choice for operators who run self-service napkin points, table dispensers, or counter service areas.

In self-service settings, napkin waste is a genuine operational cost that often goes unnoticed. Xpressnap dispensers are engineered to dispense one napkin at a time, and these napkins are produced to work reliably within that system — reducing the likelihood of guests pulling handfuls rather than a single sheet. This can meaningfully reduce overall napkin consumption compared to stacked or interleaved alternatives left open on a table.

From a practical standpoint, the 9000-unit pack size suits operations that go through napkins at volume and want to reduce the frequency of reordering and restocking. The natural finish is increasingly preferred by operators who want their front-of-house consumables to reflect a more considered approach to sustainability without compromising on function.

• Compatible with Tork Xpressnap dispensers FS374, HX966, and DB465
• One-at-a-time dispensing reduces waste in self-service areas
• Natural unbleached finish suits sustainability-conscious operators
• High-volume pack reduces restocking frequency
• Consistent napkin size and fold for reliable dispenser performance

These napkins are well suited to cafés, casual dining restaurants, staff canteens, food courts, and any operation running Xpressnap dispensers at multiple points. They are not compatible with standard napkin holders or interleaved dispensers — the dispenser system is integral to how the product performs.

If you are considering switching to a dispensed napkin system or are unsure which Xpressnap dispenser suits your layout, we are happy to point you in the right direction.

Tork LinStyle Cutlery Bag Napkins are pre-folded, single-ply paper napkins designed to hold cutlery neatly at the place setting. The fold creates a pocket that keeps knives, forks and spoons presented cleanly, while the napkin itself remains available for use throughout the meal. They are notably softer and more substantial in feel than standard economy napkins, which makes them a reasonable choice where table presentation forms part of the dining experience.

In service, the pre-folded format saves staff time during table setup — there is no additional folding required, and the consistent finish means covers are laid quickly and uniformly even during a busy turnaround. The white colourway suits most table settings and works across formal dining, brasserie-style service, and function catering alike.

• Pre-folded cutlery pocket ready for immediate use at the table
• Softer, bulkier feel than standard paper napkins — better suited to full-service covers
• Extra absorbent construction for practical use throughout the meal
• Consistent fold supports uniform presentation across all place settings
• Suitable for restaurants, function venues, and contract catering operations

These napkins are well suited to full-service restaurants, hotel dining rooms, and function venues where a presentable table is expected but full linen service is not required or practical. For very high-volume banqueting operations, it is worth considering the pack count per case to ensure adequate stock is held for back-to-back service sessions.

If you are unsure which napkin specification best fits your service style or volume, the team is happy to help you work through the options.

Tork LinStyle dinner napkins are a 1-ply disposable napkin with a woven textile appearance, designed to give a more considered table presentation than a standard paper napkin. Folded to quarter size and supplied in white, they suit formal and semi-formal dining settings where presentation matters but the practicality of a disposable product is preferred over cloth linen.

In a catering environment, disposable napkins in this style are commonly used in restaurants, hotels, banqueting, and event catering where the cost and logistics of laundering cloth napkins are a factor. The LinStyle finish gives a softer, more refined look at the table without the overhead of a linen service.

• Woven textile appearance for a more formal table setting
• 1/4 fold — ready to place or fan-fold as required
• 1-ply construction — practical for everyday covers
• Disposable — eliminates laundering cost and turnaround time
• White finish suits most table settings and colour schemes

These are a straightforward consumable, but if you are weighing up napkin grade or finish across a larger operation — or considering whether a heavier-ply option would better suit your covers — the team is happy to help you work through the options.

This is Tork's EN 1499 certified antimicrobial foam soap, supplied as a case of six one-litre refill cartridges compatible with Tork S4 foam soap dispensers. It combines standard handwashing and antimicrobial sanitising into a single step, making it a practical choice for commercial kitchens, food preparation areas, and hospitality back-of-house environments where hand hygiene compliance is a routine operational requirement.

The low-alcohol foam formula is effective against bacteria, viruses, and yeasts without the skin dryness that higher-alcohol products can cause with repeated use throughout a shift. Because it is free from perfume and added dyes, it is well suited to workplaces where staff may have sensitivities, and it avoids the residual fragrance that some operators prefer to keep out of food preparation areas.

• EN 1499 certified — meets recognised hand hygiene standards
• Combined wash and sanitise in a single procedure
• Perfume and dye-free, reducing the risk of allergic reactions
• Foam format delivers consistent dosing, reducing waste
• Compatible with Tork S4 foam soap dispensers (FA713)

As a foam product, each litre cartridge delivers a high number of doses from a controlled-dispense mechanism, which helps manage consumption across a busy team. This makes the six-pack format a sensible stocking quantity for sites with regular throughput rather than purchasing single refills more frequently.

If you are unsure which Tork dispenser system is already installed on your site, or whether this refill is the correct match, it is worth checking before ordering. We are happy to help confirm compatibility.

The Tork A3 Constant Air Freshener Dispenser is a wall-mounted washroom unit designed for continuous, passive fragrance release rather than timed spray bursts. Unlike conventional aerosol-based dispensers, it uses a diffusion-based delivery system that releases scent steadily throughout the day, maintaining a consistent level of fragrance without the peaks and troughs associated with interval spraying.

In commercial washroom environments — whether in a restaurant, hotel, leisure facility or workplace — odour control needs to be reliable and unobtrusive. The A3 dispenser handles this without requiring staff to monitor or adjust it regularly. A single refill provides up to 90 days of continuous operation, which reduces the frequency of restocking and keeps routine maintenance straightforward. The intensity can be set according to the size of the space and preference, which helps avoid over-fragrancing in smaller washrooms.

• Continuous passive diffusion — no timed spray intervals or odour spikes
• Adjustable scent intensity to suit different room sizes
• Certified Easy to Use by the Swedish Rheumatism Association, simplifying refill changes
• Can be positioned lower on the wall than traditional spray units
• Available in Breeze, Blossom, and a subtle Odour Neutraliser fragrance

Installation is straightforward — the unit is wall-mounted and requires no electrical connection or plumbing. It suits most commercial washroom settings and is practical in locations where staff access for daily maintenance is limited. It is worth noting that the continuous diffusion format is designed for enclosed washroom spaces; open or heavily ventilated areas may reduce its effectiveness.

This dispenser is well suited to hospitality, foodservice, and facilities management operations where consistent washroom presentation matters and low-maintenance performance is a priority. If you manage multiple sites or higher-footfall washrooms, it is worth discussing refill consumption rates and volume options with us before ordering.

These Tork Constant Air Freshener refills are designed for use with the Tork Constant Air Freshener Dispenser (HX960, sold separately). Each refill contains an odour neutraliser with a subtle lemongrass note, so rather than simply covering unwanted smells, it actively works to eliminate them at source.

In a commercial washroom setting — whether in a restaurant, hotel, care home, or workplace facility — consistent odour control matters for the impression the space makes on guests and staff alike. These refills are straightforward to change over, keeping maintenance simple for cleaning teams without requiring specialist knowledge or tools.

• Neutralises odours rather than masking them
• Subtle lemongrass scent for low-key freshness
• Supplied as a pack of six for convenient stock management
• Compatible with the Tork Constant Air Freshener Dispenser HX960
• Easy changeover to minimise cleaning staff time

It is worth noting that these refills are only compatible with the Tork HX960 dispenser — they will not fit other dispenser formats, so confirm your existing hardware before ordering. If you are setting up a new dispenser system, the HX960 unit is available separately.

If you are fitting out multiple washrooms or want guidance on dispenser placement and refill volumes for your footfall levels, we are happy to help you work that through.

This is a six-pack of Tork Luxury Foam Soap refills, designed for use with Tork S4 wall-mounted soap dispensers. Each bottle is factory-sealed and fitted with a single-use pump to reduce contamination risk between refills. The soap itself is a foaming formulation enriched with moisturising ingredients and a mild, neutral scent — practical choices for environments where staff or visitors are washing hands repeatedly throughout the day.

In busy commercial washrooms — whether in a hotel, restaurant back-of-house, or food production facility — hand hygiene compliance is easier to maintain when the product on the wall is comfortable to use regularly. A skin-friendly pH and moisturising formula make this a reasonable choice for kitchens where staff are washing hands frequently during service, reducing the likelihood of skin irritation that can discourage proper handwashing habits.

• Factory-sealed bottles with single-use pumps to minimise contamination risk
• Compatible with Tork S4 dispensers, making refilling straightforward
• Collapsible bottles reduce waste volume and are made from recycled plastic
• Dermatologically tested with a skin-friendly pH
• Refill process designed to take under ten seconds per bottle

It is worth confirming you have Tork S4 dispensers in place before ordering, as these refills are specific to that system and will not fit other dispenser types. If you are looking to set up a washroom from scratch, dispenser units are available separately.

This pack suits catering businesses, hospitality sites, and food production environments that already run Tork S4 dispensers and want a consistent, dermatologically tested soap. If you have a higher footfall site requiring more frequent restocking, it may be worth considering a larger case format. If you have any questions about dispenser compatibility or volume requirements, the team is happy to help.

The Tork S4 is a wall-mounted hand hygiene dispenser designed for consistent, reliable use in commercial environments. It accepts the full range of Tork S4 refill cartridges — foam, liquid or gel — allowing the same dispenser unit to be used across different areas of a site depending on what each location requires.

In a busy kitchen or washroom setting, the dispenser's variable dose control helps manage consumption without compromising hygiene. The factory-sealed cartridge system delivers a fresh pump mechanism with every refill, which reduces the risk of bacterial build-up inside the unit — a genuine consideration in food-handling environments. The transparent window gives staff a clear visual indication of remaining product without removing the cartridge, making it straightforward to monitor during service.

From a practical standpoint, the key operational advantages include:

• Accepts foam, liquid or gel S4 refills — one dispenser across multiple locations
• Variable dose control helps reduce product waste over time
• Fresh pump with every sealed refill cartridge limits contamination risk
• Visible window allows low-product checks without opening the unit
• Refill change is fast, keeping maintenance disruption minimal

Installation is straightforward — the unit wall-mounts with standard fixings and requires no plumbing or electrical connection. It suits kitchens, washrooms, front-of-house areas and welfare facilities equally well. For very high-footfall sites with multiple access points, it is worth considering the number of units needed to maintain coverage during peak periods rather than relying on a single dispenser.

This dispenser is well suited to most commercial kitchens, hospitality venues and food service operations looking for a consistent, low-maintenance hand hygiene solution. If you are specifying multiple units across a larger site or want guidance on which S4 refill format works best for a particular area, the team is happy to help you work that through.

Tork mildly scented soap is a gentle, everyday hand wash formulated for regular use in commercial and public washroom environments. It produces a soft, creamy lather and is designed to cleanse without stripping moisture from the skin — a practical consideration in settings where staff are washing their hands repeatedly throughout a shift.

Each bottle is factory-sealed with a fresh pump, which helps maintain hygiene during storage and makes refilling straightforward. The refill process is quick, which matters in busy operations where washroom checks need to be efficient rather than time-consuming. The bottles are compatible with Tork S4 soap dispensers, so they're a straightforward stock replacement for sites already running that dispenser system.

A few points worth noting for operations managers:

• Factory-sealed bottles reduce contamination risk during storage and refilling
• Compatible with Tork S4 soap dispensers for straightforward restocking
• Dermatologically tested with a skin-friendly pH — suitable for staff with dry or sensitive skin
• Effective in cold water, which can support modest reductions in energy use
• Bottles use 30% recycled plastic and collapse as they empty, reducing waste volume

This soap is well suited to catering operations, hospitality venues, and food production sites where hand hygiene compliance is important and staff welfare is a practical consideration. It's a sensible choice for sites already standardised on Tork S4 dispensers.

If you're unsure whether this product is compatible with your existing dispensers, or you're looking to specify a complete washroom hygiene solution, the team are happy to help you confirm the right fit.