Designline Drop In Slimline Multideck product image

Designline

Designline Drop-In Slimline Multideck 900mm with Rear Door

SKU: CW663

£5,054.00(£6,064.80 inc VAT)
Get a quote

Request a callback

Leave your details and we will call you back about Designline Drop-In Slimline Multideck 900mm with Rear Door.

Delivery Information

Price Match

  • In the event of equipment failure any parts needed will be provided 1
  • In the event of equipment failure an engineer will be sent for an onsite repair 1

The Designline Slimline Multideck is a refrigerated display unit built to sit within a cut-out in a servery counter or to operate as a freestanding grab-and-go merchandiser. It uses a curved elliptical profile in polished stainless steel and aluminium with toughened glass shelving and an open customer-facing front. A hinged double-glazed rear door allows operators to restock without disturbing customer access from the front of the counter.

In continuous service the unit holds product reliably within its chilled band, which matters for sites running extended service periods where food safety compliance is non-negotiable. The three toughened glass shelves are adjustable in both height and angle, giving practical flexibility when displaying products of varying sizes. A cold deck at the base adds usable display space beyond the upper shelves — useful during busy periods when presentation and replenishment efficiency both matter. Shelf-edge lighting and integral ticket strips support clear product identification without requiring additional display hardware.

  • Three adjustable toughened glass shelves with shelf-edge lighting and ticket strips
  • Cold deck below the shelves adds further chilled merchandising capacity
  • Hinged double-glazed rear door for restocking without interrupting customer flow
  • R290 hydrocarbon refrigerant lowers environmental impact and running costs versus older refrigerants
  • Integral condensate evaporator and removable deck plates simplify cleaning and remove the need for a drainage connection

The unit runs from a standard 13A single-phase supply via the included 2m lead and plug. When fitted as a drop-in, the fascia panel must include ventilation apertures to allow adequate airflow to the underslung condensing unit — this is a firm installation requirement and needs to be built into the counter design before ordering, not retrofitted. The unit ships on locking castors with an adjustable levelling foot to assist alignment during counter installation. At 190kg it requires proper handling equipment on delivery. In quieter front-of-house environments the noise output at 71dB is worth factoring into placement decisions.

This unit is well suited to cafés, hotel buffet areas, hospital retail outlets, workplace restaurants and deli-style counters where refrigerated product needs to be visible, accessible and well presented throughout the day. It is a practical fit for medium-volume operations. Sites with significantly higher throughput or larger continuous display requirements may find a wider or greater-capacity unit a better match for their needs.

If you are planning a counter build-out or want to confirm this unit fits your layout and ventilation arrangement before committing, our team is happy to talk it through with you.

Frequently asked questions

Does the fascia ventilation need to be designed in before the counter is built?

Yes — this is a firm installation requirement, not an optional detail. The underslung condensing unit relies on airflow through apertures in the fascia panel, and there is no practical way to retrofit adequate ventilation once a counter structure is in place. If you are commissioning a bespoke counter or working with a joinery contractor, the ventilation specification should be confirmed before fabrication begins. We can advise on what is needed if you share your counter drawings with us.

Is this unit suitable for a high-volume hospital or workplace catering operation?

It is well suited to medium-volume sites — hospital retail outlets, staff restaurants and similar settings where refrigerated product needs to be consistently presented and accessible throughout the day. For operations with very high continuous throughput or where display capacity needs to cover significantly larger product ranges, a wider or higher-capacity unit is likely a better fit. It is worth discussing your expected service volumes with us before ordering.

Can this unit be used freestanding rather than built into a counter?

Yes. The unit ships on locking castors and can operate as a freestanding grab-and-go merchandiser without being recessed into a counter. When used this way the ventilation requirements are simpler, as airflow to the condensing unit is not restricted by a fascia panel. The adjustable levelling foot also remains useful for ensuring the unit sits level on uneven floors.
Designline Drop-In Slimline Multideck 900mm with Rear Door

£5,054.00(£6,064.80 inc VAT)

£5,054.00(£6,064.80 inc VAT)

The Designline Slimline Multideck is a refrigerated display unit built to sit within a cut-out in a servery counter or to operate as a freestanding grab-and-go merchandiser. It uses a curved elliptical profile in polished stainless steel and aluminium with toughened glass shelving and an open customer-facing front. A hinged double-glazed rear door allows operators to restock without disturbing customer access from the front of the counter.

In continuous service the unit holds product reliably within its chilled band, which matters for sites running extended service periods where food safety compliance is non-negotiable. The three toughened glass shelves are adjustable in both height and angle, giving practical flexibility when displaying products of varying sizes. A cold deck at the base adds usable display space beyond the upper shelves — useful during busy periods when presentation and replenishment efficiency both matter. Shelf-edge lighting and integral ticket strips support clear product identification without requiring additional display hardware.

  • Three adjustable toughened glass shelves with shelf-edge lighting and ticket strips
  • Cold deck below the shelves adds further chilled merchandising capacity
  • Hinged double-glazed rear door for restocking without interrupting customer flow
  • R290 hydrocarbon refrigerant lowers environmental impact and running costs versus older refrigerants
  • Integral condensate evaporator and removable deck plates simplify cleaning and remove the need for a drainage connection

The unit runs from a standard 13A single-phase supply via the included 2m lead and plug. When fitted as a drop-in, the fascia panel must include ventilation apertures to allow adequate airflow to the underslung condensing unit — this is a firm installation requirement and needs to be built into the counter design before ordering, not retrofitted. The unit ships on locking castors with an adjustable levelling foot to assist alignment during counter installation. At 190kg it requires proper handling equipment on delivery. In quieter front-of-house environments the noise output at 71dB is worth factoring into placement decisions.

This unit is well suited to cafés, hotel buffet areas, hospital retail outlets, workplace restaurants and deli-style counters where refrigerated product needs to be visible, accessible and well presented throughout the day. It is a practical fit for medium-volume operations. Sites with significantly higher throughput or larger continuous display requirements may find a wider or greater-capacity unit a better match for their needs.

If you are planning a counter build-out or want to confirm this unit fits your layout and ventilation arrangement before committing, our team is happy to talk it through with you.