Lincat Y10010 Ductless Recirculation Extraction Canopy

Product No: Y10010

Product Description

The Lincat Y10010 is a free-standing, self-contained recirculation canopy designed to manage cooking fumes, grease particulates, and odours above electric catering equipment — without requiring any ductwork or penetration through the building fabric. Rather than exhausting air to the outside, it draws cooking air through a four-stage filtration sequence and returns treated air back into the kitchen. For sites where conventional ducted extraction is structurally impractical or cost-prohibitive, it offers a workable route to meeting basic ventilation requirements.

The filtration works progressively: a stainless steel baffle filter captures grease, a G4 matrix panel filter addresses finer airborne matter, a HEPA stage handles smaller particles, and a loose-granule carbon stage manages cooking odours. Together, these stages provide a reasonable standard of air treatment for lower-to-medium intensity cooking environments. It is worth being direct about one limitation — this type of unit manages air quality, not ambient temperature. Kitchens operating in warmer conditions should ensure independent cooling provision is adequate, particularly through summer service periods.

From a practical standpoint, the Y10010 offers several operational advantages worth considering:

  • No ductwork required, significantly reducing installation complexity and cost
  • Standard 13A connection only — no specialist electrical supply or isolator needed
  • Stainless steel baffle filters are dishwasher-safe and straightforward to clean weekly
  • Self-contained design makes relocation feasible if the kitchen layout changes
  • Filter stages can be visually inspected during routine maintenance checks

Assembly requires two people to lift the upper canopy section into position, but once assembled, filter installation and commissioning is straightforward. The unit does not require duct penetration, though a background ventilation rate of around 10 to 15 air changes per hour is advisable — most commercial kitchens will already meet this through existing provisions. Baffle filters should be cleaned weekly; the panel filter should be checked at the same time and replaced as needed. It is worth factoring consumable filter costs into the ongoing running cost before committing to purchase.

The Y10010 is well suited to smaller commercial kitchens, cafés, staff restaurants, and light-use catering operations running electric equipment where a ducted solution is not viable. It is not suitable for gas appliances, heavy-duty cooking lines, or high-volume operations producing significant heat load — for those environments, a ducted extraction system or a higher-capacity unit would be the more appropriate choice.

If you are working out whether a recirculation canopy is the right fit for your kitchen — or want to talk through filter maintenance and running costs before you decide — our team is happy to help you think it through.

Key Features

  • Four-stage filtration: baffle, G4 panel, HEPA, and carbon granule stages
  • Free-standing self-contained design requires no external ductwork or penetration
  • Stainless steel baffle filters are dishwasher-safe for straightforward weekly cleaning
  • Operates on a standard 13A connection with no specialist electrical supply required
  • Modular filter assembly allows visual inspection and staged replacement as needed

Operational Benefits

  • Allows extraction to be installed where ducting to outside is not feasible
  • Reduces installation time and cost significantly compared to ducted alternatives
  • Weekly baffle cleaning keeps maintenance simple without disrupting kitchen operations
  • Portable self-contained build means the unit can move if the layout changes
  • Progressive filtration manages grease, fine particles, and cooking odours in sequence

Specifications

External depth (mm)
734
External height (mm)
2222
External width (mm)
1551
Power rating (kw)
3
Power type
Electric 1 Phase
Weight (kg)
220

Frequently Asked Questions

Regular price £9,953.00 exc. VAT £11,943.60 inc. VAT
Stock due by (approx)

Quick Facts

  • No external extraction required
  • Four stage filtration
  • Free standing construction
  • Ideal for restricted planning conditions
  • In the event of equipment failure an engineer will be sent for an onsite repair
  • In the event of equipment failure any parts needed will be provided
  • Item weighs over 100kg and will need care and planning to get into position
  • This product is Made in Britain