Bonzer Cup Dispensers

These are the genuine replacement gaskets for Bonzer pull-type cup dispensers. The gasket is the wear component that grips and holds the cup stack in position, and over time — particularly in high-turnover environments — it softens, distorts, or perishes, causing cups to drop or dispense inconsistently. Replacing the gasket restores reliable single-cup dispensing and avoids the waste and frustration of cups falling through in bunches during a busy service.

Bonzer produces gaskets across a range of diameters to suit different cup formats, from espresso-sized cups through to larger cold drink sizes. Selecting the correct size is straightforward provided you know the rim diameter of the cup you are using — the six available sizes cover most standard commercial cup formats in common use across cafés, quick-service restaurants, and hospitality operations.

• Correct gasket size restores consistent single-cup dispensing
• Prevents cup drop and stack bunching during busy service periods
• Suitable for both hot and cold cup formats across the Bonzer range
• Simple replacement that extends the working life of the dispenser unit
• Available in six diameters to match a wide range of cup rim sizes

The main practical consideration is confirming the cup rim diameter before ordering. If you are unsure which size corresponds to your current cup stock, it is worth measuring the outer rim of the cup rather than relying on the cup's nominal volume size, as different manufacturers vary slightly in their dimensions.

These gaskets are suited to any operation running Bonzer pull-type dispensers where cup dispensing has become unreliable. If you are unsure which gasket size matches your cups, or whether a worn gasket is the only cause of dispensing issues, we are happy to help you work through it before you order.

The Bonzer 12574-01 is an in-counter elevator cup dispenser with a 450mm plastic tube, designed to keep disposable cups within easy reach at the point of service. The elevator mechanism uses an adjustable spring-loaded pusher and silicone gasket, which allows the dispenser to accommodate a range of cup rim diameters from 62mm to 98mm — a single unit covering five common cup sizes. This makes it a practical choice where cup specifications vary or are likely to change over time.

In busy beverage service environments, having cups dispensed cleanly and at counter height reduces fumbling during peak periods and helps maintain a tidy service point. The elevator design presents the top cup at a consistent level as the stack depletes, which keeps service smooth without staff needing to reach into the unit. The plastic construction keeps costs down without meaningfully compromising durability in typical counter use.

Practical advantages in day-to-day service include:

• Single-unit coverage across five cup sizes, reducing the need for multiple dispensers
• Spring-loaded elevator maintains consistent cup presentation throughout the stack
• Silicone gasket helps protect cup rims and reduces contamination risk
• In-counter installation keeps the worktop clear and supports a tidy service layout
• NSF approved, supporting compliance in food service environments

Installation requires a 120mm cut-out in the counter surface, with the top ring sitting at 153mm diameter. This is a straightforward counter-drop-in unit with no electrical or plumbing requirements. It is worth confirming your counter depth and material before cutting, as the 450mm tube length determines how many cups can be stored in a single load. For sites with higher throughput or deeper counters, a 600mm version is available in the range.

This dispenser is well suited to cafés, staff canteens, quick-service restaurants, and self-service beverage stations where counter space is limited and a clean, hygienic cup presentation matters. It is a cost-effective choice for operators who want reliable everyday performance without unnecessary complexity. If you are unsure which tube length or cup size range best suits your setup, the team is happy to help you work it out before you order.

The Bonzer 12574-03 is an in-counter elevator-style cup dispenser with a 600mm plastic tube, designed to sit flush within a counter top and present cups at working height as each one is taken. The spring-loaded elevator mechanism rises automatically, keeping the next cup consistently accessible without staff intervention. A single tube covers rim diameters from 62mm to 98mm, accommodating a wide range of standard disposable cup sizes through an adjustable spring and silicone gasket arrangement.

In busy beverage service environments — coffee shops, café counters, self-service stations, and front-of-house drink points — this type of dispenser removes the need to handle cup stacks manually during service. The longer 600mm tube holds a greater quantity of cups than the shorter 450mm alternative, which reduces the frequency of top-ups during a peak period. The plastic construction keeps the unit lightweight and the overall cost modest, making it a practical choice where multiple dispenser positions are needed across a counter run.

• Single tube adjusts to fit cups with rim diameters from 62mm to 98mm
• 600mm tube length provides higher cup capacity between refills
• Spring-loaded elevator keeps cups presented consistently at counter height
• Silicone gasket supports a secure, rattle-free fit for varying cup profiles
• NSF approved and designed and manufactured in the UK

Installation requires a 120mm circular cut-out in the counter top. The unit drops in and is retained by the top ring, so no tools are needed once the hole is cut. It is worth confirming counter depth before ordering — the 600mm tube needs sufficient clearance below the worktop surface, and the shorter 450mm version is available where undercounter space is restricted.

This dispenser suits cafés, canteens, beverage bars, and any counter where a tidy, accessible cup presentation is needed. It is well suited to operations running a single cup size or a narrow range of compatible sizes. For high-volume sites considering multiple dispensers or integrated counter builds, it is worth having a conversation first to confirm tube length and cut-out positioning works within the planned layout.

The Bonzer 12577-02 is a stainless steel in-counter elevator cup dispenser designed to sit flush within a counter cutout. A spring-loaded mechanism rises as each cup is taken, presenting the next cup at counter height automatically. The adjustable spring tension and silicone gasket allow the unit to accommodate cup rim diameters across a broad range within a single tube — a practical advantage wherever more than one cup format is used or where formats change between service periods.

In continuous beverage service — coffee shops, hotel breakfast stations, self-service counters, staff canteens — a correctly set elevator dispenser keeps things moving without staff having to reach into a container or lift a cabinet door. The 600mm tube holds a useful quantity of cups beneath the counter, reducing how often the dispenser needs reloading during a busy service. Stainless steel holds up well in the humid conditions typical of counter environments, where plastic alternatives tend to discolour and degrade over time. The tube removes cleanly for washing, which matters in any operation where hygiene standards are audited.

• Adjustable spring tension accommodates a wide cup rim diameter range in one unit
• Silicone gasket protects cup rims and maintains a stable, secure fit throughout the stack
• Stainless steel construction resists corrosion and cleans down quickly between services
• Flush in-counter installation keeps the countertop surface unobstructed
• NSF approved for commercial food service use

Installation requires a counter cutout of the correct diameter, and this unit is designed exclusively for in-counter fitting — it is not suitable for surface mounting. Counter material and below-counter clearance should both be confirmed before ordering, as the 600mm tube length needs adequate depth beneath the worktop. Where under-counter space is more limited, a shorter tube length is available within the Bonzer range.

This dispenser is well suited to cafés, quick-service restaurants, hotel beverage counters, and similar operations where cup access speed and counter hygiene both matter. It works best on moderate to high throughput counters running continuous or near-continuous service. If you are planning a multi-position installation or want to confirm which tube length suits your counter configuration, we are happy to talk it through before you place an order.

The Bonzer 12577-01 is a stainless steel in-counter elevator cup dispenser designed for permanent installation into a counter surface. A spring-loaded mechanism lifts the cup stack progressively as each cup is removed, so the next cup is always presented cleanly at counter level. An adjustable spring and silicone gasket give the unit compatibility across a broad rim diameter range — 62mm to 98mm — which makes it genuinely practical for operators running more than one cup size from a single position.

In busy coffee shops, self-service canteens and quick-service restaurants, this type of dispenser earns its place by keeping cups consistently accessible throughout peak periods without staff needing to intervene or top up mid-service. Because the stack sits below the counter surface and cups are dispensed one at a time, they stay protected from counter splashes, dust and unnecessary handling — a real hygiene benefit in high-footfall environments.

• Spring-loaded elevator maintains a consistent dispensing height as the stack depletes
• Wide rim diameter range reduces the need for a separate dispenser per cup size
• In-counter position clears the work surface and supports a tidier service layout
• Stainless steel construction is straightforward to clean and built for sustained daily use
• NSF approval supports compliance in regulated food service environments

Installation requires a 120mm circular cutout in the counter, so this unit is only appropriate where that modification is feasible. The 450mm tube suits standard counter depths; where a higher cup capacity is needed, a longer 600mm version is available in the range. Before ordering, it is worth confirming your cup rim diameter sits within the 62–98mm range, as not all cup profiles will be compatible.

This dispenser is well suited to cafés, quick-service outlets and self-service counters where cups are drawn consistently throughout the day. If you are fitting multiple positions or want to confirm compatibility with your counter setup, we are happy to talk it through.