Pull-Type Cup Dispensers and Spares

Stainless Steel Wall Mounted Cup Dispenser, reliable hygienic dispensing of water cups and small sized paper and foam cups. Stainless steel Gasket system One cup at a time. Wall mounted.

The San Jamar C3400P is a pull-type cup dispenser designed to hold and dispense 12 to 24oz paper, plastic or foam beverage cups in commercial service environments. A patented self-adjusting collar accommodates cups across a range of rim diameters, removing the need to swap out components when cup stock changes.

In busy service settings — cafés, canteen serveries, hospital catering, fast food counters — having cups accessible and consistently dispensed without fumbling or toppling makes a practical difference during peak periods. The pull-type mechanism delivers one cup at a time cleanly, keeping the stack secure and reducing the likelihood of cups being handled unnecessarily, which supports basic hygiene standards at self-service or staff-operated stations.

Practical advantages for day-to-day operation include:

• Self-adjusting collar accepts paper, plastic and foam cups without manual adjustment
• High-impact stainless steel tube construction holds up well to frequent daily use
• Flexible mounting — counter-standing, wall-mounted horizontally, vertically or at 45 degrees
• Frees counter space when wall-mounted, useful in tight service areas
• Compatible with a broad rim diameter range, reducing stock compatibility concerns

Installation is straightforward. The dispenser can be surface-mounted to most wall types or used free-standing on a counter via its mounting ring. No electrical or water connections are required. For wall mounting, access to appropriate fixings for the surface type is worth confirming before installation, particularly on tiled or composite surfaces.

This dispenser suits single-point beverage stations in cafés, office kitchens, hospital wards, canteens and similar environments with moderate cup throughput. For very high-volume sites dispensing continuously across multiple service points, a multi-stack or higher-capacity dispensing solution may be worth considering.

If you're unsure which dispenser configuration best fits your station layout or cup stock, our team is happy to talk it through.

• To suit Bonzer cup dispensers
• If you want to store your cup dispensers horizontally in a counter, add the bracket attachment to support the tube end.

The San Jamar C3200P is a pull-type cup dispenser designed to hold 6 to 10oz paper, plastic or foam beverage cups with a rim diameter in the 56–81mm range. The unit uses a patented self-adjusting collar to grip cups securely, so a single dispenser can accommodate a spread of cup sizes without manual reconfiguration — a practical advantage in operations where cup stock occasionally changes.

In a busy service environment, reliable cup dispensing is a small but meaningful part of workflow. A well-positioned dispenser reduces handling time, keeps cups clean and protected, and avoids the clutter of loose cup stacks on a counter. The C3200P's pull-type action delivers one cup at a time consistently, which helps maintain a tidy service point during peak periods.

• Self-adjusting collar accommodates a range of cup rim diameters without adjustment
• High-impact stainless steel tube construction for durability under frequent use
• Mounts horizontally, vertically or at 45 degrees to suit the available space
• Suitable for paper, plastic or foam cups in the 6–10oz range
• Wall or counter mounting frees up surface space at the service point

Installation is straightforward — the mounting ring locks onto most wall surfaces, cooler sides or countertops, and the flexible orientation options mean it can be fitted into awkward spaces or positioned for left- or right-handed access. There are no electrical or water connections required.

This dispenser is well suited to cafés, staff canteens, self-service beverage stations and front-of-house drink service points where a compact, practical cup holder is needed. For high-volume locations dispensing larger cups or requiring integrated cabinetry-mounted solutions, a higher-capacity dispenser may be more appropriate.

If you're unsure whether the cup sizes you use fall within the compatible range, our team are happy to help you confirm before you order.

Stainless Steel Wall Mounted Cup Dispenser, reliable hygienic dispensing of water cups and small sized paper and foam cups. Stainless steel Gasket system One cup at a time. Wall mounted.

The San Jamar C3500P is a pull-type cup dispenser designed to hold and dispense large-format cups in the 32 to 46oz range. It accepts paper, plastic, and foam cups with a rim diameter between 101 and 123mm, and suits self-service beverage stations, café counters, canteen service points, and front-of-house setups where one consistent large-format cup is used throughout the day.

In a busy service environment, cup dispensing is a small detail that causes real disruption when it goes wrong. The C3500P uses a self-adjusting collar that accommodates minor variation in cup dimensions within the supported size window, releasing one cup at a time with a straightforward pull action. This keeps the station tidy, limits unnecessary handling of unused cups, and is a practical consideration for any operation where hygiene at self-service points matters.

• Self-adjusting collar handles rim variation within the 101–123mm range reliably
• Pull-type action dispenses one cup at a time, reducing contact with unused cups
• Mounts horizontally, vertically, or at 45 degrees to suit available space
• Wall or counter mounting options free up worktop area on compact stations
• No electrical or plumbing connection required

Installation is straightforward — the unit secures to most wall surfaces or to a counter via its locking mounting ring, with no electrical or plumbing work involved. The most important step before purchasing is confirming that your cups fall within the 101 to 123mm rim diameter range. Cups outside this window will not seat or dispense correctly. This is a single-range unit, so any operation running more than one cup size will need a separate dispenser for each format.

The C3500P is well suited to cafés, canteens, fast food operations, and self-service beverage counters where a large-format cup is the consistent standard. Sites with multiple cup sizes in service, or higher-volume operations requiring greater capacity, may find it worth exploring whether a different configuration would serve better.

If you would like to talk through cup sizing or how to set up your beverage station, the team is happy to help you work it out before you order.

The San Jamar C4400PF is a wall or cooler-mounted pull-type dispenser designed to hold foam beverage cups in the 12 to 24oz range. It operates on a gravity-fed, top-loading principle — cups are loaded from the top and dispensed one at a time by pulling from the base. The stainless steel tube construction gives it a clean, professional appearance that suits front-of-house and back-of-house environments alike.

In busy service settings, consistent cup dispensing matters more than it might seem. Having cups readily accessible without staff needing to handle a full sleeve reduces contact, speeds up service, and keeps the counter area tidier during peak periods. The self-adjusting mechanism accommodates the full 12 to 24oz foam cup range without requiring separate sizing rings, which simplifies restocking when cup sizes change between service periods or across different beverages.

• Self-adjusting fit across the full 12–24oz foam cup range without sizing rings
• Gravity-fed top-load design makes refilling quick and straightforward
• Removable flip cap protects stored cups from airborne contaminants
• High-impact stainless steel tube construction handles frequent daily use
• Mounts to most wall surfaces and cooler sides to free up counter space

Installation is straightforward — the unit attaches to most standard wall surfaces or cooler exteriors using the included mounting hardware. There are no electrical or plumbing requirements. It is worth confirming the rim diameter of your specific foam cups falls within the 82 to 98mm range before ordering, as foam cup dimensions can vary between manufacturers even within the same nominal fluid ounce size.

This dispenser is well suited to cafés, canteens, self-service counters, convenience-style beverage stations, and anywhere foam cups are dispensed at moderate to high volume. For very high-throughput sites dispensing multiple cup sizes simultaneously, a multi-sleeve or under-counter dispensing solution may be worth considering.

If you are unsure whether this model fits your cup stock or your counter setup, the team is happy to help you confirm compatibility before you order.

The San Jamar C4200PF is a wall-mounted, pull-type cup dispenser constructed from high-impact stainless steel and designed to hold foam beverage cups in the 4 to 10oz range. It is a straightforward piece of front-of-house or self-service kit — cups are loaded from the top and dispensed individually by pulling from the base, keeping the stack clean and accessible throughout service.

In a busy café, canteen, or beverage station, this type of dispenser earns its place by keeping cups organised, hygienic, and within easy reach without occupying counter space. The self-adjusting mechanism accommodates the range of foam cup sizes without requiring separate sizing rings, which is useful where a site uses more than one cup format across hot and cold drinks. The stainless steel construction is durable enough for frequent daily use and straightforward to wipe down as part of a routine hygiene check.

• Top-loading gravity-fed design with protective cap keeps cups clean between refills
• Self-adjusting sleeve fits foam cups across the 4–10oz range without adaptors
• Wall or cooler-mounted to free up counter space at busy service points
• Stainless steel tube resists impact and cleans down easily
• Removable cap allows quick, hygienic refilling during service

Installation is straightforward — the unit fixes to most wall surfaces or cooler sides using standard fixings, making it suitable for countertop beverage stations, self-service areas, or staff refreshment points. No electrical or plumbing connections are required. It is worth confirming that your foam cup stock falls within the 70–85mm rim diameter range before purchasing, as the dispenser is sized for that profile.

This dispenser suits cafés, canteens, healthcare catering, convenience stores, and any site running a self-service hot or cold drinks station with moderate to high cup throughput. If you're fitting out a larger or higher-volume station and need to consider multiple dispensers or a different mounting configuration, the team are happy to help you work out what suits the space.

The San Jamar C3450SS is a surface-mounted, gravity-fed cup dispenser constructed in stainless steel and designed to hold a generous quantity of large flat-bottom or cone water cups in the 82–98mm rim diameter range. It operates on a simple pull-type mechanism — one cup is dispensed at a time, keeping the remaining stack clean and contained. The flip cap closes over the top of the tube when not in use, preventing dust and airborne contamination from settling on stored cups.

In practice, this type of dispenser earns its place at water stations, self-serve beverage counters, and patient or visitor refreshment points where large cups are needed in volume. The stainless steel construction handles the wear of a busy service environment well and is straightforward to wipe down as part of a regular cleaning routine. The self-adjusting mechanism accommodates minor variation across cup brands within the compatible size range, which reduces the frustration of sourcing a single exact cup profile.

• Stainless steel construction resists corrosion and wipes clean easily
• Flip cap closes over the stack to keep cups hygienic between service periods
• Self-adjusting mechanism suits flat-bottom and cone cups in the 82–98mm range
• Mounting bracket allows secure fixing to coolers or flat wall surfaces
• Pull-type gravity feed dispenses one cup at a time, reducing waste and spillage

Installation is straightforward — the included mounting bracket fixes to a flat wall surface or the side of a water cooler without specialist tools. No electrical or water connections are required. The unit is surface-mounted rather than recessed, so wall depth is not a consideration, though you will need to allow adequate clearance in front of the dispenser for comfortable one-handed cup retrieval during a busy service.

This dispenser is well suited to cafeterias, healthcare refreshment stations, reception areas, and hospitality settings where large cups are used regularly. It is a single-column unit, so for very high-footfall locations requiring faster replenishment cycles, a multi-column or higher-capacity dispenser may be worth considering. If you are unsure whether this model is the right fit for your setup, our team is happy to talk it through with you.

The San Jamar C2901 is a surface-mounted single cup dispenser cabinet designed for countertop beverage stations where cutting into the counter is not practical or permitted. It houses a single EZ-Fit cup dispenser and is intended for operations that need tidy, accessible cup dispensing at a fixed service point without a permanent in-counter installation.

In a working service environment, the cabinet keeps cups protected, upright, and dispensed one at a time, reducing the risk of cups being knocked over, contaminated by handling, or taken in multiples. The EZ-Fit dispenser uses interchangeable pre-cut gaskets, which means the same unit can be adjusted to suit different cup sizes across a wide range — covering most standard paper, plastic, and foam beverage cups from around 8oz through to 46oz. This makes it reasonably flexible for operations that occasionally change cup sizes or run different cups at different service points.

• One-at-a-time dispensing reduces cup contamination and waste
• Four interchangeable gaskets accommodate a wide range of cup sizes without replacing the dispenser
• Surface-mounted design suits counters where in-counter fitting is not possible
• Compatible with paper, plastic, and foam cups across most standard sizes
• Black polystyrene cabinet construction keeps cups enclosed and presentable at the point of service

Installation is straightforward — the cabinet is designed for countertop placement or surface mounting and does not require plumbing, electrical connection, or any specialist trade work. It is worth confirming the cup rim diameter against the gasket range before ordering, as the fit depends on selecting the correct gasket for the cup in use.

This cabinet is well suited to cafés, quick-service restaurants, staff canteens, healthcare catering, and similar settings where a single cup size or a small range of cup sizes is dispensed at a fixed point. For operations running multiple cup sizes across a busy service counter, a multi-position or higher-capacity cabinet configuration may be worth considering.

If you are unsure whether this unit suits your cup sizes or service setup, the team is happy to talk it through before you order.

San Jamar XC2226 Spare Gasket Kit with 1 x S/M/L & XL Gasket - For C2210 Dispensers

The San Jamar C4500PF is a surface-mounted, pull-type dispenser designed to hold large-format foam beverage cups in the 32 to 46oz range. Cups are top-loaded into a stainless steel tube and dispensed one at a time from the base — a gravity-fed mechanism that is straightforward to operate and easy to restock mid-service without interrupting the flow of a busy counter.

The self-adjusting sleeve is a practical detail worth noting. Foam cups can vary slightly in diameter between batches and suppliers, and the sleeve accommodates that variation without needing separate sizing rings or adjustment. For sites that refill dispensers frequently or source cups from more than one supplier, this removes a small but genuine operational inconvenience. The stainless steel tube construction handles the repeated handling and incidental knocks typical of high-footfall service points, and the removable flip cap keeps the cup stack protected from dust and airborne contaminants between refills.

• Self-adjusting sleeve fits foam cup batches without additional parts or tools
• Pull-type dispensing limits cup contact, supporting front-of-house hygiene
• Top-loading design allows fast restocking without removing the unit
• Mounts to wall surfaces or upright cooler panels to free up counter space
• Stainless steel tube withstands regular handling in busy service environments

Fitting is uncomplicated — the unit mounts to most standard wall surfaces or cooler uprights using the supplied hardware, with no electrical or plumbing connections required. Before ordering, it is worth confirming that your cup stock falls within the supported rim diameter range, as foam cup dimensions can vary between manufacturers.

This dispenser is a practical choice for fast food outlets, convenience stores, cinema and leisure concessions, self-service canteens, and anywhere large cold drink cups are in consistent, high-volume use. Sites dispensing smaller cup formats, or those needing a countertop rather than wall-mounted configuration, will find alternative options within the wider range.

If you want to confirm compatibility with your existing cup stock before placing an order, the team is glad to help you work through that.

The San Jamar C4410PFSD is a wall-mountable, pull-type foam cup dispenser designed to hold and dispense 12 to 24oz foam beverage cups in a controlled, hygienic way. It is a straightforward piece of front-of-house or beverage station kit — cups are loaded from the top and dispensed one at a time from the base, keeping the stack protected and the service point tidy.

In practice, this type of dispenser earns its place at self-serve drink stations, hot beverage counters, and cooler fronts where staff or customers need quick, single-cup access without handling the whole stack. The self-adjusting mechanism accommodates the common range of foam cup sizes without requiring separate sizing rings, which reduces the fuss of switching between cup formats if your supplier changes batch dimensions slightly.

From an operational standpoint, the main advantages are straightforward:

• Frees up counter space by moving cups off the worktop and onto the wall or cooler face
• Protects cups from dust and handling via the gravity-fed, top-loading design with a removable flip cap
• Eliminates sizing ring changes across standard foam cup sizes in the 12-24oz range
• High-impact plastic construction holds up to frequent daily use without cracking or warping

Installation is minimal — the unit attaches to most wall surfaces and cooler fronts without specialist tools or trades involvement. There are no electrical, water, or gas connections required. The main practical consideration is positioning: mount it at a height that suits your service flow, and ensure the cup size you use regularly falls within the supported rim diameter range before ordering.

This dispenser is well suited to cafés, canteens, convenience counters, and self-serve beverage stations handling moderate daily cup volumes. For very high-throughput sites dispensing several hundred cups per session, a higher-capacity model or a countertop unit may be worth considering.

If you are unsure whether this unit suits your cup format or station layout, our team are happy to help you confirm the right fit before you order.

The San Jamar C2010C is an in-counter portion cup dispenser designed specifically for small paper or plastic portion cups — the kind commonly used for sauces, dressings, condiments, and sample servings. It mounts flush into a counter cutout and presents cups one at a time through an elevator mechanism, keeping the stack protected and the service area tidy.

In busy service environments, dispensers like this earn their keep by reducing handling time and keeping portion cups hygienic and accessible. Rather than rummaging through a loose stack, staff lift a single cup cleanly from the dispenser — useful during peak service when speed and consistency matter. The EZ-Fit design accommodates a range of cup rim sizes within its supported range, with included gaskets allowing operators to switch between cup sizes without replacing the unit.

Practical advantages for day-to-day service include:

• One-at-a-time dispensing reduces contamination risk from handling
• In-counter mounting keeps the worktop clear and uncluttered
• Multiple gaskets included to cover different cup sizes within the supported range
• Impact-resistant construction holds up to regular commercial use
• Straightforward to reload without tools or disassembly

Installation requires a counter cutout to accept the dispenser body. The unit is designed for in-counter use, so it is not a surface-mount solution — the counter material and depth will need to suit the fit. It is best positioned where portion cups are needed most: sauce stations, salad bars, beverage counters, or self-service areas.

This dispenser is well suited to cafés, quick-service restaurants, staff canteens, and food-to-go operations where portion cups are a regular part of service. For operations running significantly higher volumes or requiring larger cup formats, it is worth checking whether a larger-capacity model would be more appropriate.

If you are unsure whether this unit fits your counter setup or cup specification, the team is happy to talk it through before you order.