Brabantia

The Brabantia NewIcon is a steel pedal bin designed for everyday waste collection in commercial and semi-commercial settings. The 30-litre capacity makes it a practical choice for smaller waste streams — reception areas, staff rooms, office kitchens, or light-duty back-of-house use where a full-size bin would be excessive.

The soft-closing lid operates quietly under foot pressure, which matters in environments where noise needs to be kept to a minimum. The lid also sits flush when closed, helping to contain odours between bag changes — a straightforward but useful feature in any enclosed space. The anti-tilt base keeps the bin stable during use, reducing the chance of it toppling when the pedal is depressed repeatedly through the course of a shift.

From an operational standpoint, the steel construction is more durable than plastic alternatives and easier to wipe down. Key practical points include:

• Soft-close lid reduces noise in customer-facing or quiet working areas
• Pedal operation keeps hands free and limits contact — useful in hygiene-conscious environments
• Steel body is straightforward to clean and holds up to regular use
• Stable base resists tipping during repeated pedal use

This bin is best suited to light-duty commercial use — staff facilities, front-of-house areas, or small preparation spaces where waste volumes are modest. It is not designed for heavy kitchen waste or high-turnover collection points where a larger, more robust unit would be more appropriate. For busier waste streams, a higher-capacity model would serve better.

If you are specifying waste management across a site and want to make sure you have the right capacity and number of units for your layout, the team is happy to help you think it through.

These are the manufacturer-matched liner bags for Brabantia's 23-30 litre waste bins, sold under Code G. Made from polyethylene with a reinforced construction, they are designed to sit flush inside the bin without bunching or slipping, which keeps waste contained and the bin itself clean between changes.

In a commercial environment — front-of-house waste stations, back-of-house prep areas, or office and welfare facilities — a poorly fitting liner causes practical problems: bags that slip down during use, split under the weight of wet waste, or require two-handed wrestling to remove. The PerfectFit design addresses this directly. Ventilation holes in the bag release the vacuum seal that forms as a liner settles into the bin, so removal is straightforward even when the bag is full. The built-in tie-tape allows the bag to be sealed and lifted in a single motion, which matters during busy service when waste needs to be cleared quickly.

• Reinforced polyethylene helps resist splits and punctures under normal commercial use
• Tie-tape integrated into the bag neck for quick, clean removal and sealing
• Ventilation holes prevent vacuum lock, making extraction easier
• Precise Code G sizing eliminates liner slippage inside the bin
• Dispenser packaging keeps bags accessible and contained at the point of use

These bags are only suitable for Brabantia bins in the 23-30 litre range. Using them with bins of a different size or brand will likely result in poor fit. If your site uses a mix of bin sizes, it is worth confirming the correct code for each bin before ordering in bulk.

If you are unsure which code applies to your existing Brabantia bins, or you are specifying waste management across a larger site with multiple bin sizes, the team is happy to help you work through the right combination.

The Brabantia Push Top Bullet Bin is a 60-litre stainless steel waste bin designed for environments where waste accumulates quickly and hygiene standards must be maintained. The push-top mechanism uses a softly sprung access door that opens on contact and closes automatically, helping to contain odours between collections without requiring staff to touch the lid directly.

In a busy kitchen or back-of-house environment, a bin that stays closed matters. Open-top bins allow smells to spread and attract attention during service. The sprung door on this unit keeps the opening closed when not in use, which is a straightforward practical advantage in any food preparation or service area. The wide opening reduces the chance of waste catching the rim, which helps keep the outer surface cleaner over the course of a shift.

At 60 litres, this bin suits moderate to high-volume waste output — appropriate for a working kitchen, a front-of-house area, or a staff facility. The stainless steel construction wipes down easily and holds up well to the daily cleaning routines common in commercial environments. Key practical points include:

• Sprung push-top door keeps waste contained and reduces odour spread
• Wide aperture reduces spillage when disposing of waste at pace
• Stainless steel exterior is easy to wipe down and resistant to surface staining
• Footprint suited to placement in corridors, prep areas, or service stations
• No liner mechanism to maintain — straightforward day-to-day use

The cylindrical profile means it fits neatly into corners or alongside counters without protruding awkwardly. At just under 4.5kg, it is light enough to reposition easily but stable enough not to tip during normal use. No installation is required — it is freestanding and ready to use. Standard bin liners fit the capacity, though a snug fit works best to avoid bunching at the rim.

This bin is well suited to commercial kitchens, hospitality back-of-house areas, hotel corridors, or any professional environment that needs a reliable, presentable waste solution with a reasonable hold capacity. For very high-volume sites generating significantly more waste per shift, a larger-capacity unit may be worth considering.

If you are fitting out a kitchen or front-of-house area and want to talk through the right configuration of waste management for your setup, the team is happy to help.

This Brabantia pedal bin is a compact, stainless steel waste bin designed for use in hotel bathrooms, guest rooms, and similar hospitality environments. At 3 litres it is sized for light personal waste rather than high-volume disposal, and its stainless steel construction gives it a clean, neutral appearance that sits comfortably alongside standard hotel bathroom fittings.

The pedal-operated lid allows hands-free use, which is a practical consideration in bathroom settings from both a hygiene and convenience perspective. The removable inner bucket makes emptying and cleaning straightforward for housekeeping staff, reducing the time required during room turnovers.

• Hands-free pedal operation supports basic hygiene in bathroom use
• Removable inner bucket simplifies emptying and cleaning
• Stainless steel finish is easy to wipe down and resists surface staining
• Compact footprint suits smaller en-suite and bathroom spaces

This bin is suited to individual guest rooms, en-suites, and small office or spa changing areas. It is not intended for high-traffic shared facilities or back-of-house environments where a larger capacity bin would be more appropriate.

If you are specifying bins across multiple room types or need guidance on quantities for a full hotel fit-out, our team is happy to help you work through the requirements.

The Brabantia NewIcon is a steel pedal bin with a 12-litre capacity, finished in matt black. It operates on a simple foot pedal mechanism that opens a soft-closing, odour-resistant lid — keeping hands free and containing smells between emptying cycles. A built-in anti-tilt block at the base prevents the bin from tipping when the pedal is engaged, which matters in tighter spaces where the bin may be pushed against a wall or unit.

In a commercial context, this size works best as a secondary waste point rather than a primary high-volume bin. It suits positions such as a front-of-house service counter, a small prep area, a dry store, or a washroom — anywhere that generates light, steady waste that needs to be contained hygienically without requiring constant attention. The soft-close lid reduces noise in customer-facing areas, which is a practical consideration in cafés or hospitality settings.

Key practical points worth noting:

• Hands-free operation reduces cross-contamination risk at prep stations
• Soft-close lid limits noise in front-of-house positions
• Anti-tilt base keeps the bin stable during repeated pedal use
• Matt black steel finish is straightforward to wipe down
• Compact footprint suits under-counter or counter-adjacent placement

This is not a high-volume waste solution for a busy main kitchen. For sites generating significant food waste or needing larger capacity in a central kitchen position, a larger bin or a dedicated waste management unit would be more appropriate.

If you are fitting out multiple waste points across a site and want to think through the right combination of sizes and positions, the team is happy to help work through the options.

Brabantia PerfectFit bin bags in Code X are designed specifically for Brabantia 10-12 litre waste bins. Rather than using generic liners that bunch, slip, or leave gaps, these polyethylene bags are cut to the exact profile of the bin, sitting flush against the inner walls and staying in place during use.

The bags include a tie-tape closure, which allows clean and quick removal without needing to knot the bag by hand. Ventilation holes in the base of each bag prevent the vacuum effect that makes lifting a full liner out of a close-fitting bin unnecessarily awkward. Both are small but practical details that reduce friction during routine waste disposal tasks.

Each pack comes in a dispenser format, keeping the remaining bags tidy and accessible without rummaging.

• Precise fit eliminates bunching and slipping inside the bin
• Tie-tape closure for quick, clean bag removal and sealing
• Ventilation holes prevent vacuum resistance when lifting the bag out
• Strong polyethylene construction resists tearing under normal use
• Dispenser packaging keeps replacement bags easy to access

These bags are a straightforward consumable suited to any operation already using Brabantia 10-12 litre bins — whether at a front-of-house station, in a small office area, or as part of a washroom setup. It is worth confirming the bin code before ordering, as Brabantia's PerfectFit range is specific to each bin size. If you are unsure which code applies to your bins, the team is happy to help you check.

The Brabantia NewIcon is a pedal-operated waste bin constructed from steel, with a soft-closing lid and a removable inner bucket. It is a straightforward, well-made product aimed at contained, low-volume waste disposal in areas where hygiene and tidiness matter.

In a commercial setting, this bin is most at home in staff areas, changing rooms, office spaces, or front-of-house toilet facilities rather than in a main production kitchen. The 12-litre capacity is suited to lower-output waste points where frequent bag changes are manageable. The pedal mechanism keeps hands free during use, which is a practical consideration in any environment where hygiene standards are maintained.

The removable inner bucket makes liner changes and cleaning straightforward. The soft-closing lid reduces noise during service periods and helps contain odours between bag changes. Key practical points include:

• Pedal operation keeps hands free and reduces cross-contamination risk
• Removable inner bucket simplifies cleaning and liner replacement
• Soft-closing lid contains odours and reduces noise
• Non-skid base keeps the bin stable on hard flooring
• Steel construction is more durable than plastic equivalents at this size

This is a compact unit and is not intended for high-volume waste output. In busy kitchen pass areas or food preparation zones, a larger-capacity or heavier-duty bin would be more appropriate. It is worth considering the waste volume at each point before specifying.

If you are fitting out multiple waste points across a site and are unsure which capacity suits each location, the team is happy to help you work through the requirements.

The Brabantia 60-litre Touch Bin is a robust, steel waste bin with a soft-touch lid mechanism that opens smoothly without the need for a firm press or foot pedal. The round format and matt steel finish give it a clean, neutral appearance that works equally well in front-of-house positions or staff and back-of-house areas. At 60 litres, it provides a practical capacity for sites generating moderate volumes of general waste throughout a service period.

The soft-touch opening allows staff to dispose of waste quickly and hygienically without transferring grease or debris to a foot pedal or handle, which is a meaningful practical advantage in a working kitchen environment. The wide aperture is large enough to empty a standard dustpan without spillage, and the rear grip makes the bin manageable to move when full. A protective base rim reduces floor contact wear, which is worth noting for tiled or finished floor surfaces.

• Soft-touch lid opens without effort, keeping contact points clean during service
• Wide opening accepts dustpan emptying without spillage risk
• Rear grip allows safe handling even when the bin is at full capacity
• Protective base rim reduces wear to floor surfaces beneath the bin
• Constructed from steel with a matt finish, suitable for both back and front-of-house use

It is worth noting that this bin is intended for general waste collection rather than heavy-duty commercial refuse use. For high-volume kitchens generating significant waste across long service periods, a larger capacity or more heavy-duty pedal bin may be more practical. This model is well suited to smaller operations, front-of-house stations, staff areas, or as a supplementary bin within a larger waste management setup.

If you are specifying waste management across a site and are unsure whether this capacity suits your throughput, the team is happy to help you think it through.

The Brabantia Touch Bin is a 30-litre steel waste bin finished in matt black, designed for general waste disposal in commercial and back-of-house environments. The lid opens via a single touch mechanism, which reduces the need for direct hand contact during busy service — a straightforward practical benefit in any food-handling area.

In day-to-day kitchen use, the touch-open lid keeps things moving without interruption. Staff can dispose of waste single-handedly without lifting or fumbling, which adds up over a long service. The removable inner bucket includes ventilation holes to prevent the vacuum effect that can make liner changes awkward, meaning bag changes are quicker and less disruptive. A rear grip makes moving the bin manageable even when it's full.

• Touch-open lid reduces direct contact during food preparation and service
• Removable inner bucket with ventilation holes for straightforward liner changes
• Rear carry grip for safe movement when the bin is at capacity
• Protective base rim reduces floor contact and potential surface damage
• Constructed from 50% recycled steel and 97% recyclable at end of life

This bin is best suited to smaller kitchens, prep areas, front-of-house positions, or offices within a catering operation — anywhere that benefits from a tidy, contained waste solution with a presentable finish. It is not a heavy-duty catering bin intended for high-volume waste streams; for busier or messier environments, a larger-capacity or more robust option would be more appropriate.

If you're unsure whether this size suits your setup or you're fitting out multiple stations, we're happy to talk it through.

These are the manufacturer-matched liners for Brabantia's 2-3 litre waste bins, sold under the PerfectFit Code V designation. Because they are sized to the bin rather than cut to a generic dimension, the bag sits flush against the inner wall without bunching or slipping during use.

The polyethylene construction provides reliable resistance to minor punctures and everyday wet waste, and ventilation holes in the base of the bag prevent the vacuum effect that can make removal awkward when a liner is otherwise a close fit. A built-in tie-tape allows the bag to be sealed and lifted in a single action, keeping the process quick during a busy service or cleaning round.

From a practical standpoint, small-capacity front-of-house or washroom bins go through liners frequently, so having bags dispensed from a dedicated pack — rather than loose in a drawer — keeps replenishment straightforward for cleaning staff.

• Designed specifically for Brabantia 2-3 litre bins — no overhang or slippage
• Ventilation holes allow smooth removal without resistance
• Tie-tape seals and lifts the bag in one movement
• Polyethylene construction handles routine wet waste reliably
• Dispenser packaging keeps replacement bags accessible and tidy

These are a straightforward consumable suited to sites that already run Brabantia small-format bins. If you are unsure which Code matches your existing bin, or you need liners for a larger-capacity model, the team is happy to point you in the right direction.

The Brabantia NewIcon is a steel pedal bin with a 30-litre capacity, finished in matt black. It is a straightforward, well-built waste bin designed to perform reliably in day-to-day use without requiring much attention. The soft-close lid mechanism keeps noise to a minimum, which matters in environments where a clattering bin lid becomes a persistent irritant over a long shift.

Constructed from steel with a non-slip base and an anti-tilting block, the bin stays put on smooth floor surfaces and does not rock or shift when the pedal is operated. The inner bucket is removable for cleaning and acts as an odour barrier, which is a practical consideration in any area where waste accumulates between collections.

For commercial premises, this bin tends to work best in lower-traffic support areas rather than high-volume production kitchens. It is commonly used in staff rooms, office areas, front-of-house spaces, and smaller preparation rooms where a neat, durable bin is needed without the bulk of a larger commercial unit.

• Soft-close lid reduces noise during service
• Removable inner bucket supports quick liner changes and cleaning
• Non-slip base and anti-tilt design keeps the unit stable on smooth floors
• Steel construction is more durable than plastic alternatives at this capacity
• Matt black finish suits both kitchen and front-of-house environments

If you are unsure whether this capacity is appropriate for your waste volumes or whether a different format would suit the space better, our team is happy to help you work through the options before you order.

The Brabantia NewIcon is a compact steel pedal bin finished in matt black, designed for use in hotel rooms, en-suites, guest bathrooms, and similar hospitality settings where a small, discreet waste solution is needed. It operates via a foot pedal, keeping the user's hands free and away from the bin itself — a straightforward hygiene advantage in any guest-facing environment.

The lid is soft-closing, which prevents the sharp noise of a lid slamming shut — a small but worthwhile consideration in hotel rooms where guest experience is a priority. An odour-proof seal helps contain waste smells between housekeeping rounds, which is particularly useful in compact spaces such as en-suite bathrooms or cloakrooms.

From a practical standpoint, the matt black finish is reasonably resistant to visible fingermarks compared with gloss or chrome alternatives, and the steel construction means it holds up to regular daily use without distorting or cracking as cheaper plastic bins tend to do over time. The inner bucket lifts out for straightforward liner changes and cleaning.

• Foot-pedal operation keeps hands away from the bin — practical for hygiene
• Soft-close lid reduces noise in guest environments
• Odour-proof lid seal helps manage waste between cleans
• Removable inner bucket simplifies liner changes and maintenance
• Matt black steel finish suits contemporary room schemes

This size is best suited to individual hotel rooms, guest bathrooms, or cloakroom areas. For housekeeping corridors, back-of-house spaces, or shared facilities requiring a larger capacity, a bigger model would be more appropriate.

If you're fitting out multiple rooms or need guidance on which bin sizes suit different areas of a property, we're happy to talk it through.

These are the manufacturer-matched liner bags for Brabantia 50-60 litre waste bins, sold under the PerfectFit Code H designation. The sizing is specific to Brabantia's own bin range, so they sit flush against the inner walls without bunching or slipping — a small detail that makes a noticeable difference in day-to-day use.

The bags are constructed to resist tearing during normal filling and removal. A built-in tie-tape closure allows the bag to be sealed and lifted out cleanly, while ventilation holes near the base prevent the vacuum effect that can make removal awkward, particularly with full bags. They are supplied in a dispensing pack, which keeps them accessible and tidy in a busy back-of-house or front-of-house setting.

• Matched fit for Brabantia 50-60 litre bins — no slipping or bunching
• Tie-tape closure for clean, quick removal and sealing
• Ventilation holes prevent vacuum resistance on removal
• Extra-strong construction reduces the risk of tears and leaks
• Dispenser packaging keeps bags accessible and orderly

These are a straightforward consumable, but using the correct liner for the bin does reduce bag waste from misfits and avoids unnecessary mess during service. They are suited to any environment running Brabantia bins in this size range — front-of-house, office areas, or light back-of-house use.

If you are unsure which Code applies to your existing bins, or need to discuss liner options across multiple bin sizes, the team is happy to help you work it out.

The Brabantia StepUp is a compact 10-litre pedal bin designed for light waste management in catering and hospitality environments. It opens hands-free via a foot pedal, which reduces the need for staff to touch the bin during food preparation or service — a straightforward hygiene advantage in busy prep areas, front-of-house stations, or staff rooms.

The soft-closing lid prevents the kind of noise that becomes disruptive in quieter service environments, and the bin includes a built-in bag storage compartment, keeping spare liners accessible without cluttering the surrounding workspace. A click-on label holder allows operators to mark the bin clearly for a specific waste stream, which is useful where waste segregation is required.

Brabantia manufacture this bin using a high proportion of recycled material, which may be relevant for operators with sustainability reporting requirements or green accreditation schemes.

At 10 litres, this bin is suited to low-volume waste points rather than main kitchen waste collection. It works well as a secondary bin — on a prep station, at a barista counter, in a cloakroom, or behind a service bar — rather than as a primary waste receptacle for a busy kitchen. For higher-volume waste points, a larger capacity bin would be more appropriate.

If you are unsure whether this size is right for your setup, or if you need advice on waste management across a larger site, the team is happy to help you think it through.

The Brabantia Touch Bin is a mid-capacity pedal-free waste bin designed for general waste disposal in commercial and hospitality environments. The touch-open mechanism operates the lid with a single press, keeping hands clear of the rim — a practical consideration in food preparation and front-of-house areas where hygiene discipline matters.

The removable inner bucket is designed with ventilation holes that break the vacuum seal when lifting out a full liner, which makes bag changes quicker and less awkward during a busy service. The matt steel finish is reasonably resistant to everyday handling and wipes down without leaving obvious smear marks. A back grip allows the bin to be repositioned without tipping, and a protective base ring reduces the risk of floor marking over time.

For a waste bin at this price point, the Brabantia Touch Bin offers a few practical advantages worth noting:

• Touch-open lid reduces direct contact, supporting hygiene routines
• Ventilated inner bucket prevents liner vacuum — bag changes take seconds
• Matt steel exterior wipes clean easily without visible smearing
• Back grip allows safe repositioning when the bin is full
• Made from 35% recycled material and 96% recyclable at end of life

This bin is best suited to front-of-house areas, staff rooms, office spaces within a hospitality site, or light-duty back-of-house positions where waste volumes are moderate. It is not designed for heavy continuous use in high-output kitchen production areas, where a larger, more robust bin would be more appropriate. For sites generating higher waste volumes or requiring dedicated food waste separation, higher-capacity options are available within the range.

If you are fitting out a new site and unsure which bin sizes suit which areas, we are happy to talk it through.

The Brabantia StepUp is a compact pedal-operated waste bin suited to staff areas, offices, back-of-house spaces, and smaller utility rooms within a commercial catering environment. The foot pedal allows hands-free lid operation, which limits the transfer of bacteria when hands are soiled or gloved — a practical consideration in any food-handling setting.

The soft-closing lid mechanism keeps the bin quiet in use, which matters in customer-adjacent areas such as café service counters or front-of-house prep stations where a clattering lid would be unwelcome. The flat-back profile is designed to sit flush against a wall, making it a sensible choice where floor space is limited.

A few practical points worth noting:

• Foot pedal operation keeps hands away from the lid during service
• Soft-close lid reduces noise in quieter or customer-facing areas
• Flat-back design fits neatly against walls in tight spaces
• Built-in bag storage inside the bin keeps liners accessible
• Click-on label holder supports waste sorting or recycling labelling

At 10 litres, this bin is best suited to low-volume waste points — think a hand-wash station, a small prep area, or an office adjacent to the kitchen. It is not intended for high-throughput service waste, where a larger commercial bin would be more appropriate. The construction uses a high proportion of recycled consumer-waste plastic, and the unit is designed to be recyclable at end of life.

If you are fitting out multiple waste stations or need guidance on bin sizing for a specific area, the team is happy to help you work through what makes sense for your setup.

The Brabantia 60-litre Touch Bin is a freestanding waste bin designed for everyday use in both front-of-house and back-of-house environments. The soft-touch lid mechanism opens with minimal effort, which makes it practical in areas where staff have full hands or are working quickly during service.

In a commercial setting, a bin of this size suits moderate-traffic areas such as service counters, break rooms, office kitchens, or hospitality reception spaces rather than high-throughput production kitchens, where larger or more robust waste management solutions would typically be required. The wide opening is useful for emptying dustpans cleanly, and the sturdy rear grip allows the bin to be moved without difficulty even when full.

From an operational standpoint, the key practical advantages are straightforward:

• Hands-free-style opening reduces cross-contamination risk at busy service points
• Wide aperture accommodates bulky waste without spillage
• Protective base rim helps prevent floor damage on tiled or vinyl surfaces
• Robust construction holds up to regular daily use
• Made from 35% recycled material and 96% recyclable after end of use

There are no utility connections or installation requirements — the bin is freestanding and ready to use. It is worth considering the available floor space and bin bag compatibility before ordering, as the cylindrical form factor suits certain layouts better than others.

This bin is best suited to lower-volume waste points, hospitality front-of-house areas, staff rooms, or smaller food businesses. Sites generating high volumes of waste from active food preparation are likely to need higher-capacity or more heavy-duty containment.

If you are unsure whether this size is right for your setup, the team is happy to help you think it through before you order.

The Brabantia StepUp is a foot-operated pedal bin aimed at environments where hands-free waste disposal helps maintain basic hygiene standards. The pedal mechanism lifts the lid without hand contact, and a soft-close hinge brings it back down quietly — useful in offices, staff rooms, front-of-house areas, and light-duty back-of-house spaces where noise and hygiene matter.

The bin is constructed from 91% recycled consumer plastic and is itself 99% recyclable at end of life, which suits operators with sustainability commitments or procurement policies that require responsible sourcing. It includes a clip-on label holder on the front, making it straightforward to set up a basic waste-sorting system across multiple bins. Bag storage is built into the inner body, so replacement bags are kept close to hand without cluttering the surrounding area.

The profile is designed to sit flush against a wall, which helps in tighter spaces such as cloakrooms, prep corridors, or office kitchens. A rear grip makes it easy to move or empty without awkward handling.

• Pedal-operated lid for hands-free use
• Soft-close mechanism for quiet operation
• Label holder for waste-stream identification
• Wall-hugging profile suits compact spaces
• Made from recycled materials, fully recyclable

This bin is not designed for heavy commercial waste volumes or wet waste from a working kitchen. For high-throughput or wet-waste applications, a heavier-duty unit with a larger capacity would be more appropriate.

If you are fitting out a waste-sorting station or need guidance on matching bin capacity to a specific area, the team is happy to help you work through the options.

The Brabantia ReNew toilet roll holder is a wall-mounted washroom accessory finished in matt black. It is designed to hold a standard toilet roll securely and is constructed from corrosion-resistant materials, making it a practical choice for washrooms that see regular, heavy use in hospitality and commercial settings.

In busy venues — hotels, restaurants, cafes, and staff facilities — washroom fittings take considerably more wear than their domestic equivalents. The corrosion-resistant construction helps the holder maintain a clean, presentable appearance over time without the surface degradation that can affect lower-quality fittings in damp environments.

• Corrosion-resistant build suited to high-humidity washroom environments
• Matt black finish presents well in both front-of-house and back-of-house facilities
• Suitable for wall mounting with screws or double-sided tape, offering installation flexibility
• Simple, tool-friendly roll change to minimise time spent on routine maintenance

Installation is straightforward. The holder can be fixed using either the included screws for a permanent, secure mount, or double-sided tape where drilling is not practical — useful in leased premises or where wall surfaces need to be preserved. It is worth confirming the wall surface type before choosing the tape option, as adhesion can vary on uneven or porous surfaces.

This holder is well suited to smaller commercial and hospitality venues looking for a reliable, presentable washroom fitting that won't require frequent replacement. For larger sites specifying multiple washroom accessories, it may be worth discussing a coordinated range to ensure a consistent finish throughout. If you'd like guidance on quantities or finish matching across a project, we're happy to help.

These are the manufacturer-matched bin bags for Brabantia 15-20 litre waste bins, sold under Code D. Designed to fit the bin exactly rather than bunch or slip, they sit flush against the sides and base, which helps keep the bin hygienic and the liner stable during use.

In a commercial setting — whether a back-of-house prep area, a front-of-house waste point, or a washroom — a poorly fitting liner creates extra work. Bags that are too loose bunch and trap debris; bags that are too tight tear on removal. The PerfectFit sizing addresses both issues by matching the bin profile closely, and the extra-strength construction resists the minor tears and punctures that come with routine food waste disposal.

• Tie-tape closure for quick, one-handed removal and sealing
• Ventilation holes prevent vacuum formation, so the bag pulls free without resistance
• Dispenser packaging keeps the roll accessible and tidy at the bin station

These bags are suited to light commercial use — office kitchens, front-of-house counters, staff welfare areas, and similar low-to-medium volume waste points. For high-throughput kitchen environments generating significant food waste, a larger-capacity bin and liner format is generally more practical.

If you're fitting out multiple waste stations or want to confirm the right code for your existing Brabantia bins, the team is happy to help you get the match right.