Dishwasher & Glasswasher Baskets

The Cambro Camrack is a polypropylene glass rack designed for use in commercial glasswashers. This beige, 16-compartment version accepts glasses up to 238mm in height and up to 111mm in diameter, making it suitable for a broad range of tumbler and stemless glassware commonly used in pubs, bars, hotels, and contract catering environments.

In a busy service environment, glass turnaround matters. The open-lattice construction allows water and detergent to reach the full surface area of each glass during the wash cycle, supporting thorough cleaning and sanitisation. Once the cycle is complete, the same open structure promotes rapid air drying, which helps reduce the time glasses spend off the bar or pass.

The individual compartments are fitted with plastic guards that keep glasses separated throughout the wash, preventing contact that can cause chips, scratches, or breakage — a practical consideration when dealing with high volumes of glassware across a shift. The polypropylene construction is rated for temperatures up to 93°C, so it holds up reliably through repeated high-temperature wash cycles without warping or degrading.

• Open construction supports thorough chemical penetration and faster drying
• Compartment guards protect glassware from contact damage during washing
• Suitable for stacking, making post-wash storage and transport straightforward
• Durable polypropylene withstands repeated high-temperature glasswasher cycles

Before purchasing, it is worth confirming that the rack dimensions are compatible with your existing glasswasher interior. For operations running higher glass volumes or a wider mix of glass sizes, it may be worth considering alternative compartment configurations or rack sizes within the Camrack range.

If you are unsure which configuration suits your service pattern or glasswasher model, our team are happy to talk it through.

The Cambro Camrack is a polypropylene glass rack designed for use in commercial glasswashers. This beige 16-compartment version accommodates glasses up to 114mm tall, with each compartment keeping individual glasses separated throughout the wash cycle.

In a busy bar or restaurant environment, glassware turnover is a constant operational pressure. The open-compartment design of the Camrack allows water and detergent to circulate freely around each glass during washing, and the same open structure promotes rapid drying once the cycle is complete. This reduces the time glasses spend out of service and keeps turnaround manageable during peak periods.

The separation between compartments is the most practically important feature in day-to-day use. Glasses that touch during washing are a common cause of chips, scratches and breakages — costs that accumulate quickly in a high-turnover operation. Key operational advantages include:

• Individual compartments prevent glass-to-glass contact during washing
• Open construction supports fast drying after the wash cycle
• Polypropylene construction withstands repeated high-temperature wash cycles
• Racks stack securely for storage and transportation between service areas
• Fits standard 500mm commercial glasswasher baskets

The rack is built from polypropylene and is suited to the temperatures typical of commercial glasswashers. It is worth confirming compatibility with your existing glasswasher model before ordering, particularly if you operate a non-standard cabinet size. The 16-compartment layout is well suited to stemware and shorter tumblers — operators running taller glassware will need to check the 114mm height limit carefully against their actual glass stock.

This rack is a practical choice for pubs, bars, hotels and restaurants with moderate glassware volumes. For sites running very high glass volumes across multiple wash cycles per service, it is worth considering whether a higher-capacity rack configuration would better suit the throughput required.

If you are unsure which rack size or compartment configuration suits your glassware and washer setup, our team is happy to help you work through the options.

The Cambro Camrack is a polypropylene glass rack designed to handle glassware through the full back-of-house cycle in a single unit. Rather than moving glasses between separate carriers at each stage, the Camrack allows glassware to be washed, drained, stored, and transported in the same rack — reducing handling and the risk of breakage at every transfer point.

The 16-compartment blue version is designed for glasses up to 133mm in height, making it suitable for a wide range of stemware, tumblers, and highball glasses commonly used across bars, hotels, banqueting operations, and high-volume restaurant service. The blue colour coding is useful where an operation runs multiple rack types and needs quick visual identification by glass type or service area.

In practical terms, the Camrack system offers several operational advantages:

• Combines washing, storage, transport, and identification into one unit
• Blue colour coding supports easy rack identification across a busy operation
• Polypropylene construction is robust and resistant to warping under commercial dishwasher conditions
• Reduces glass handling between wash and service, lowering breakage risk
• Designed to integrate with Cambro's Camdolly and Camrack cover system for full stack management

The rack is straightforward to introduce into an existing operation, requiring no installation — it works with standard commercial dishwashers and integrates with Cambro's broader Camdolly transport and cover accessories where a more complete system is needed. At 500mm square, it is worth confirming compatibility with your dishwasher basket dimensions before ordering.

This rack is well suited to bars, hotel operations, and contract catering environments where glassware volume is high and efficient handling matters. For sites with a wider variety of glass heights or higher throughput demands, Cambro offers alternative compartment configurations and rack sizes worth considering.

If you are building out a full glassware handling system or need guidance on which rack configuration fits your glass range, our team is happy to help you work through the options.

The Cambro Camrack is a glass washing rack designed to fit the standard 500 x 500mm basket footprint found on the vast majority of commercial pass-through and undercounter dishwashers. This 16-compartment version in beige is intended for glassware up to 174mm in height, making it a practical choice for tumblers, highballs, and many stemless wine glasses commonly used in bars, hotels, and hospitality operations.

In a working bar or restaurant environment, glass racks do a lot of heavy work. They move from service to wash to storage and back again, often multiple times per shift. The polypropylene construction handles repeated high-temperature dishwasher cycles reliably and resists the chemical detergents used in commercial warewashing without degrading or warping over time. This kind of durability matters in high-turnover operations where racks are handled quickly and frequently.

From a practical standpoint, the Camrack range is well regarded in commercial kitchens for a few straightforward reasons:

• Standard 500 x 500mm footprint fits most commercial dishwasher baskets without modification
• Polypropylene construction tolerates sustained high-temperature wash cycles
• Resists commercial chemical detergents without surface degradation
• 16-compartment layout keeps glassware separated and reduces breakage in the wash
• Stackable design supports organised storage between service periods

It is worth noting that this rack is sized for glassware up to 174mm. If your operation uses taller glasses — certain pint glasses, cocktail flutes, or large wine glasses — you will need a rack with a greater compartment depth. The Camrack range includes versions suited to taller or larger glassware, so it is worth confirming your most commonly used glass dimensions before ordering.

This rack is well suited to bars, hotel banqueting operations, casual dining restaurants, and contract catering sites running a standard commercial dishwasher. Sites with very high glass throughput may benefit from considering higher-capacity rack configurations alongside this one.

If you are unsure which compartment size or configuration suits your glassware range, the team is happy to help you work it out before you order.

The Cambro Camrack is a purpose-built glass rack designed to keep stemware, tumblers, and similar glassware separated and stable during transport between the bar, pass, and glasswasher. Each of the 16 individual compartments holds a single glass, eliminating the glass-to-glass contact that causes chips and breakages when racks are moved at pace during a busy service.

Constructed from polypropylene, the rack tolerates repeated exposure to the high temperatures and cleaning chemicals typical of commercial warewashing. It holds its shape across a full shift of continuous rotation without warping or degrading, which in practice means less rack replacement and more consistent handling for front-of-house staff. The beige colour is particularly useful in operations running multiple rack types, as it allows for straightforward identification and rotation management behind the bar or in the wash area.

In operational terms, the benefits are straightforward:

• Compartmentalised layout prevents glass-to-glass contact during movement
• Fits standard 500 x 500mm glasswasher baskets for direct pass-through use
• Polypropylene construction withstands repeated chemical glasswasher cycles
• Manageable loaded weight for front-of-house handling
• Beige colour supports rack rotation and stock identification

This rack is well suited to pubs, bars, hotels, and event caterers managing moderate glassware volumes. The 16-compartment layout works well with standard tumblers and wine glasses up to 257mm in height. Operations running taller stemware, larger glassware collections, or higher throughput may find a different compartment count or rack height a more practical fit.

If you would like to talk through whether this rack suits your glassware profile or glasswasher configuration, we are glad to help before you commit to an order.

The Cambro Camrack is a glass rack designed for the safe transport, washing, and storage of glassware in commercial environments. This beige 16-compartment version accommodates glasses up to 133mm in height, keeping each glass individually separated to prevent contact damage during handling and dishwasher cycles.

In busy bar and catering operations, glass breakage is a persistent cost. Camracks are widely used precisely because they remove glassware from loose stacking and manual handling between service and the wash area. The individual compartments hold glasses securely whether the rack is being carried across a bar floor or running through a commercial glasswasher or dishwasher, and the polypropylene construction handles the heat and chemical exposure of a commercial wash cycle without warping or degrading over time.

Key practical advantages for day-to-day operation:

• Individual compartments eliminate glass-to-glass contact during transport and washing
• Polypropylene construction is resistant to high temperatures and commercial cleaning chemicals
• Stackable design keeps storage compact between service periods
• Consistent rack sizing simplifies integration with standard commercial glasswashers
• Beige colour coding supports rack organisation across different glass types or zones

It is worth confirming the internal dimensions of your glasswasher before ordering, as rack fit varies between machines. The 133mm maximum glass height suits many standard wine and tumbler glasses, but taller stemware will require a higher-clearance rack. For operations washing a wider variety of glass sizes, it is worth considering whether a mixed rack range would be more practical.

This rack suits bars, restaurants, hotels, and contract catering operations looking for a reliable, long-lasting system for moving and washing glassware efficiently. Lighter or smaller operations may find a reduced-compartment rack easier to handle when full.

If you are unsure which rack configuration suits your glass range or glasswasher setup, we are happy to help you work through the options.

The Cambro Camrack is a polypropylene glass rack designed around a straightforward principle: glassware should move through a commercial kitchen — from wash to storage to service — without being handled more than necessary. This 16-compartment blue rack accommodates glasses up to 238mm in height and forms part of Cambro's broader 4-in-1 system, where the same rack is used for washing, storing, identifying by colour, and transporting glassware.

In a busy bar or restaurant environment, that continuity matters. Glasses go into the rack dirty, through the glasswasher in the rack, out onto the shelf in the rack, and back to the service point in the rack. There is no intermediate transfer step, which reduces handling time, breakage risk, and the chance of contamination between wash and service.

• Colour-coded blue for fast visual identification across a multi-rack system
• Compatible with Camdolly transport dollies and Camrack covers for a complete handling system
• Polypropylene construction withstands repeated glasswasher cycles without warping
• 16 individual compartments protect glasses from contact with one another during transit
• Stackable design supports efficient storage in tight back-of-house spaces

This rack is well suited to hotels, bars, restaurants, and event catering operations running high volumes of glassware through a single glasswasher. The colour-coding system is particularly useful where multiple rack sizes are in circulation and quick identification is important during a busy service. For operations handling very large or unusually tall glassware, it is worth checking whether a different compartment configuration would be a better fit before ordering.

If you are building out a full Camrack system or are unsure which combination of rack sizes and accessories suits your service volume, our team is happy to talk it through with you.

The Cambro Camrack is a dedicated glassware rack designed to handle the full cycle of commercial glass management in a single unit. Available in a 16-compartment configuration with a maximum glass height of 215mm, this red rack supports washing, storage, identification by colour, and transportation without the need to transfer glassware between different carriers at each stage.

In a busy bar or restaurant operation, the handling of glassware is one of the more time-consuming and breakage-prone parts of service. The Camrack system addresses this by allowing glasses to go from the bar or table directly into the rack, through the glasswasher, and back out to the service point without being individually handled at each step. This reduces the risk of breakage during transit and helps staff work more efficiently during peak periods.

The colour-coding system is a practical advantage in multi-outlet or larger operations where different glass types need to be kept separate and routed correctly. The red designation makes sorting and identification straightforward at a glance.

• Eliminates unnecessary glass handling between wash and service stages
• Colour coding aids sorting in high-volume or multi-bar operations
• Compatible with Camdolly transport dollies and Camrack covers for a complete system
• Reduces breakage risk during transportation through the kitchen or bar
• Consistent rack sizing simplifies glasswasher loading and storage stacking

The rack is part of the wider Cambro Camrack system, which includes compatible transport dollies and covers. If you are setting up or expanding a full glassware management system, it is worth considering how many racks, dollies and covers your service volume and storage layout actually require before ordering.

If you are unsure whether the 16-compartment configuration suits your glass sizes or service setup, we are happy to talk it through.

The Cambro Camrack is a polypropylene glass rack designed for use in commercial glasswashers. The 16-compartment layout holds glassware securely during washing cycles, with an open construction that allows water and detergent to reach all surfaces without obstruction. It accommodates glasses up to 155mm in height and up to 111mm in diameter, making it practical for a wide range of bar and restaurant glassware.

In a busy bar or restaurant environment, glassware throughput is a constant pressure. The Camrack's open-cell design promotes fast draining after the wash cycle, which reduces the time glassware needs to sit before it's ready for service. The polypropylene construction is built to withstand repeated use at elevated wash temperatures, and the rack maintains its shape and rigidity through sustained daily use.

The practical benefits for front- and back-of-house operations include:

• Compartment dividers keep glasses separated, reducing chipping, scratching, and breakage
• Open construction allows thorough chemical penetration and effective sanitisation
• Fast post-wash drainage means less waiting time before glasses return to service
• Rack doubles as a storage and transport carrier, reducing unnecessary glass handling
• Stackable design supports organised storage and efficient use of shelf space

The 500 x 500mm footprint is sized to fit the majority of commercial undercounter and passthrough glasswashers. It is worth confirming internal chamber dimensions against your existing machine before ordering, particularly on older or compact models.

This rack is well suited to pub bars, hotel bars, restaurant and bistro operations, and event catering setups where consistent glassware turnover is required. For operations running multiple glasswasher cycles per hour or handling a broader range of glass sizes, it is worth considering whether a different compartment count or rack configuration would serve better.

If you're unsure which rack specification fits your glassware range or machine, we're happy to help you work it out before you order.

The Cambro Camrack is a polypropylene compartment rack designed specifically for handling glassware in commercial operations. This blue 16-compartment version accommodates glasses up to 215mm in height and is built around the principle that glassware should move through the operation — from wash through to service — without being handled any more than necessary.

The rack system is designed so that glasses go straight into the Camrack, pass through the glasswasher in the rack, and then move directly to storage or the bar without being unpacked and re-stacked. This reduces handling, which in turn reduces breakage and the risk of contamination from staff contact. In a busy bar or banqueting environment, that workflow efficiency adds up quickly across a service.

From an operational standpoint, the practical advantages are straightforward:

• Colour-coded blue for easy identification across a multi-rack system
• Compatible with the Cambro Camdolly for mobile transport across the floor
• Designed to accept a Camrack cover for hygienic closed storage
• Polypropylene construction is durable, easy to clean and dishwasher-safe
• Stackable when not in use, helping manage storage space efficiently

The rack is sized to fit standard glasswasher baskets, though it is worth confirming compatibility with your existing machine before ordering. The 16-compartment configuration suits standard tumbler and wine glass profiles; operations using very tall or large-format glassware should check the 215mm height limit against their actual stock.

This rack is well suited to pubs, hotel bars, banqueting kitchens and catering operations where glassware volume is high and breakage cost is a real concern. Sites running multiple glass types across different service areas may benefit from using several Camrack colours to keep glassware separated and easily identifiable.

If you are looking to build out a full Camrack system or want to discuss which compartment configuration suits your glassware range, we are happy to help you work through the options before you order.

The Cambro Camrack is a purpose-built glass rack designed to handle glassware through the full cycle of a busy service operation — from the glasswasher, through storage, and back to the bar or service point — without the glasses ever needing to be handled individually. The red 16-compartment variant accommodates glasses up to 238mm in height, making it well suited to most standard pub, bar, and restaurant glassware.

What makes the Camrack system practical in a real working environment is that it removes the need to unpack and repack glassware at each stage. Glasses go into the rack, the rack goes into the glasswasher, and once clean the same rack moves directly to storage or service. This reduces handling, lowers the risk of breakage, and saves time during busy turnarounds when staff are working quickly under pressure.

The colour-coding is a straightforward operational tool. Using different colours across a rack estate helps teams identify glass types at a glance, which is useful in venues running multiple glass sizes or managing separate service areas.

• Reduces glass handling throughout the wash, store, and transport cycle
• Colour-coded red for easy identification of glass types or service zones
• Compatible with Camdolly for mobile transport between areas
• Designed to work with the Camrack cover for protected storage
• Suits bars, restaurants, hotels, and event catering environments

It is worth confirming that the 238mm maximum height is compatible with your specific glassware before ordering — taller stemware or certain pint glasses may require a different compartment configuration. If you are fitting out a full rack system across multiple service areas, it is also worth thinking through colour allocation and dolly requirements from the outset.

If you are unsure which rack configuration best fits your glass range or service volume, we are happy to talk it through.

The Cambro Camrack is a polypropylene glass rack designed for use in commercial dishwashers with a standard 500 x 500mm basket format. This beige, 16-compartment version accepts glasses up to 215mm in height, making it suitable for a wide range of tumbler and stemless glassware commonly found in busy bars, hotel banqueting operations, and restaurant service areas.

Cambro racks are a well-established choice in commercial glasswashing environments. The polypropylene construction handles repeated thermal cycling reliably, and the material is rated to withstand the high wash temperatures typical of commercial warewashers. The compartments are sized to keep glasses separated and upright during the wash cycle, which helps reduce breakage and ensures water and detergent reach all surfaces properly.

From a practical standpoint, these racks offer a straightforward operational advantage: glasses go straight from the rack through the dishwasher and back to the bar or service point with minimal handling. Key practical points include:

• Fits standard 500 x 500mm commercial dishwasher baskets
• 16 compartments keep glasses separated and secure during washing
• Polypropylene construction resists warping and staining over time
• Beige colour aids rack identification in multi-rack glasswashing setups
• Suitable for direct racking from service trays to dishwasher

These racks are designed to stack when not in use, which helps with storage in tight back-of-house spaces. There are no installation requirements as such, though operators should confirm their dishwasher accepts a standard 500 x 500mm rack format before ordering — not all commercial warewashers share the same basket dimensions.

This 16-compartment configuration is well suited to operations running mid-sized glassware such as tumblers, hi-balls, and juice glasses. For venues using taller stemware or larger-format glasses, a rack with fewer, larger compartments would be more appropriate. Equally, higher-volume sites running continuous glasswashing shifts may benefit from holding a larger number of racks to maintain throughput.

If you are building out a glasswashing setup or are unsure which rack configuration suits your glassware range, the team is happy to help you work through the options.

The Cambro Camrack is a polypropylene rack designed to carry glassware through a commercial glasswasher and then directly into storage or service — without the glasses needing to be handled individually in between. The 16-compartment layout accommodates stems and tumblers up to 279mm in height, making it a practical fit for bars, restaurants, and function venues managing moderate glass volumes per wash cycle.

The real operational value of the Camrack lies in reducing the number of times glassware changes hands between washing and service. Glasses go in dirty, come out clean, and can be covered and transported directly to the bar or service point using compatible Camdolly trolleys. This cuts handling time during busy turnarounds and lowers the risk of breakage from unnecessary transfers. The polypropylene construction handles the repeated thermal cycling of a busy glasswasher reliably without warping or degrading.

In practical terms, the rack offers a few clear advantages for day-to-day operation:

• Combines washing, storage, transport, and identification into a single unit
• Compatible with Camdolly trolleys and Camrack covers for a complete closed system
• Beige colour-coding helps operators sort glass types or service areas at a glance
• Minimises individual glass handling between wash and service, reducing breakage risk
• Polypropylene construction tolerates repeated commercial wash cycles without distortion

The rack is sized to fit standard commercial glasswashers, but it is worth confirming your machine's internal basket dimensions before ordering, particularly if your glasswasher has a non-standard interior. Storage space for multiple racks should also be factored in for busier operations. For venues moving very large quantities of glass — such as banqueting suites or high-throughput bars — a higher-compartment rack may be worth considering alongside this model.

The Camrack suits licensed premises, hotel bars, event catering, and restaurant operations where glassware discipline and breakage control are a regular concern. It is less well suited to lower-volume kitchens where a standard dishwasher basket handles the load adequately.

If you are looking to build out a complete Camrack system or want to work out how many racks your typical cover volume requires, the team is glad to help you think it through.

The Cambro Camrack is a purpose-designed glass rack built around a wash-store-transport principle. Rather than unpacking glasses at each stage of the cycle, the rack moves with the glassware from the glasswasher through to storage and back to the bar or service area without any repacking. The red 16-compartment version accommodates glasses up to 279mm in height, covering tall stemware, pint glasses, and standard tumbler formats commonly used across pub, bar, restaurant, and hotel service.

In practice, the difference this makes during a busy service period is significant. Glass returns do not create a bottleneck because the rack itself is the handling unit. Glasses go in, the rack goes through the machine, and it comes out ready to store or return to front of house. The red colour coding gives supervisors and bar staff an immediate visual reference across a rack store — particularly useful in venues managing several glass formats across different service areas or departments.

Practical advantages for bar and hospitality operations include:

• Moves directly from glasswasher to storage to service without repacking
• Colour coding supports fast visual identification across mixed rack stores
• Consistent compartment spacing reduces glass movement and breakage risk
• Compatible with the Camdolly for floor-level transport and the Camrack cover for hygiene during storage
• Durable construction suited to the repeated thermal cycles of commercial glasswashing

The Camrack is designed to work as part of a broader system. Pairing racks with a Camdolly makes moving loaded units around back-of-house considerably easier, and the matching cover keeps stored glassware protected between services. When specifying a full system, it is worth thinking through how many racks your glasswasher cycle and peak service volume actually require — running short during a busy shift is the most common planning oversight.

This rack suits bars, hotels, function venues, and any operation handling meaningful glass volumes on a consistent basis. For smaller operations with lower throughput, a rack with fewer compartments may be a more practical fit. Where a site runs multiple glass types, building a set of racks across the available Camrack colours makes stock management considerably more straightforward.

If you are putting together a full Camrack system or want to talk through which compartment configuration and colour split works best for your operation, we are glad to help you work through it.

The Cambro Camrack is a purpose-built glass rack designed to handle glassware through every stage of a busy service cycle — from the glasswasher through to storage and back out to the bar or service area. The 16-compartment red rack accommodates glasses up to 279mm in height, making it suitable for a wide range of tall stemware, pint glasses, and similar formats commonly found in pub, bar, and restaurant environments.

Where Camrack earns its place in a working kitchen is through the 4-in-1 approach: the same rack that goes into the glasswasher also serves as a storage and transport unit, removing the need to handle glasses individually between each stage. This reduces breakage risk during peak service, keeps glassware cleaner by limiting handling, and speeds up the turnaround between wash and service. The red colour coding is a practical feature in itself — it helps staff identify rack type and glass size quickly in a busy back-of-house environment where multiple rack configurations may be in use.

• Reduces glass handling and breakage risk between wash and service
• Colour coding helps staff identify racks quickly under pressure
• Compatible with the Camdolly transport dolly and Camrack cover for a complete system
• Suits a wide range of tall glass formats including pint and stemware
• Designed to go directly from glasswasher to storage without transferring glasses

Camrack is best suited to bars, pub kitchens, hotel food and beverage operations, and any site washing significant volumes of glassware each service. For operations running multiple glass sizes or formats, Cambro offer the Camrack system in a range of compartment counts and height capacities, so it is worth considering your full glass inventory before settling on a single configuration.

If you are unsure which combination of racks, dollies, and covers best fits your operation, we are happy to help you work through the options.

The Cambro Camrack is a purpose-built glass rack designed to take glassware through the full cycle — from wash through to storage and service — without being transferred between different containers. The rack holds 16 individual glasses in separate compartments, accommodating glasses up to 133mm in height. The red colour coding helps teams identify the correct rack size quickly in busy back-of-house environments.

In commercial bar and catering operations, the main practical advantage of this system is continuity. Glasses loaded into the rack go straight into the glasswasher, come out clean, and can be stored or moved to the bar or service point in the same rack. This reduces handling, lowers the risk of breakages, and keeps service moving during peak periods. The compartmentalised design also protects glasses from contact with each other during transport, which matters when glassware is being moved from a cellar or back-of-house to a bar counter.

• Colour-coded red for quick identification across rack sizes
• Compatible with the Cambro Camdolly for efficient transport around site
• Designed to go directly into most commercial glasswashers
• Reduces glass-to-glass contact and breakage risk during transit
• Stackable with Camrack covers for hygienic storage between service periods

These racks are straightforward to use with no installation requirements, though it is worth confirming that your existing glasswasher interior dimensions will accept a 500mm square rack before ordering. The system works most effectively when paired with a Camdolly and Camrack covers, allowing a genuinely closed loop from wash to service point.

The Camrack is well suited to bars, hotels, event catering operations, and any venue handling significant glassware volumes where reducing breakage and handling time is a priority. For operations with larger glasses or higher-stemmed wine or cocktail glasses, it is worth checking whether a rack with a greater compartment height would be more appropriate.

If you are unsure which compartment size or how many racks your operation needs, we are happy to talk it through.

The Cambro Camrack is a polypropylene glass rack designed around a practical 4-in-1 principle: glassware is washed, stored, identified by colour, and transported in the same unit. The 20-compartment configuration holds glasses up to 238mm in height, making it suitable for a broad range of stemware, tumblers, and tall glasses commonly used in bars, restaurants, and banqueting operations. The beige colour coding helps front- and back-of-house teams identify glass types quickly and reduce mix-ups during busy service.

In operational terms, racks like this earn their value by removing unnecessary handling. Glasses go from the glasswasher into the rack, move directly to storage or the bar, and return in the same unit — reducing breakage risk and saving time across every shift. The polypropylene construction is robust enough for the daily rigours of commercial use and is straightforward to keep clean.

Key practical advantages include:

• Colour-coded system supports quick identification across a busy bar or service area
• Compatible with the Camdolly transport base and Camrack cover for a complete handling system
• Reduces glass breakage by minimising unnecessary transfers between containers
• Passes through commercial glasswashers as a single unit, saving handling time
• Polypropylene construction resists impact and is easy to wipe down between uses

No electrical or plumbing connections are required. The rack is a passive storage and transport unit, so installation considerations are limited to shelf depth and rack storage space. At 500mm square, it fits standard shelving and most glasswasher baskets, though it is worth confirming compatibility with your existing equipment before ordering.

This rack is well suited to bars, hotel banqueting departments, restaurants, and contract catering operations where a consistent glassware handling system reduces breakage and speeds up service turnaround. For operations running very high glass volumes across multiple stations, building out a full colour-coded Camrack system with a Camdolly and covers may be worth considering rather than individual racks in isolation.

If you are unsure which compartment size or colour code fits your glass range and workflow, we are happy to help you work through the options.

The Cambro Camrack is a multi-purpose compartment rack designed to carry glassware through the full cycle of a commercial operation — from the glasswasher through to storage and back to the bar or service point — without the glasses ever needing to be repacked. This red 20-compartment version accommodates glasses up to 279mm in height, making it suitable for a range of stemware and tumbler sizes commonly found in licensed premises and hospitality settings.

In practice, the Camrack system removes one of the more time-consuming and breakage-prone tasks in a busy service environment: transferring clean glasses from a rack to a shelf or tray. Because the rack goes directly into the glasswasher and comes out ready to store or carry to the bar, it reduces handling significantly. The colour coding — red in this case — is a straightforward way to separate glass types or service areas without relying on staff to remember which rack belongs where.

Key practical advantages for operators include:

• Wash, store, transport and identify glassware in a single rack
• Reduces glass handling and the associated breakage risk
• Colour coding supports clear organisation across multiple service areas
• Compatible with Camdolly transport dollies and Camrack covers as part of a wider system
• Consistent rack sizing supports efficient glasswasher loading

It is worth confirming that your glasswasher chamber dimensions will accept the rack before ordering, as not all commercial glasswashers accommodate the full footprint. The 279mm maximum glass height is suitable for many standard stems and highballs, but operators running very tall glassware should check measurements carefully.

This rack is well suited to bars, restaurants, hotels and event catering operations where glassware volume is high and minimising breakage and handling time matters. Sites with a wider range of glass sizes may benefit from having more than one compartment configuration available.

If you are unsure whether this configuration fits your glasswasher or service setup, our team is happy to help you work through the options.

The Cambro Camrack is a polypropylene glass rack designed to carry glassware through the entire back-of-house cycle — from collection and washing through to storage and transport — without the glasses ever needing to be removed. The blue 16-compartment version accommodates glasses up to 279mm in height, making it appropriate for a wide range of tumbler and stemless glassware commonly used in hospitality operations.

In busy bar and restaurant environments, the Camrack earns its keep by removing the repeated handling that causes breakages. Glasses go into the rack dirty, pass through the glasswasher in the rack, and come out ready to store or move directly to service. That single-journey approach reduces both glass loss and the time staff spend transferring and sorting between shifts.

From an operational standpoint, the colour-coded system is genuinely useful. Blue racks can be assigned to specific glass types or sections of the bar, which keeps stock organised and simplifies stocktaking. The polypropylene construction is robust enough for the demands of daily commercial use and resistant to the heat and detergent exposure that comes with regular glasswasher cycles.

• Eliminates separate wash, storage and transport stages for glassware
• Colour coding supports glass type segregation and stock control
• Durable polypropylene withstands repeated high-temperature glasswasher cycles
• Reduces glass breakage by minimising unnecessary handling
• Compatible with Cambro's Camdolly and Camrack cover as part of a complete system

The rack is part of Cambro's wider Camrack system, which includes a compatible dolly for floor-level transport and a cover for dust-free storage. For operations running high glass volumes across multiple sections, it is worth considering how many racks are needed to maintain a smooth rotation through wash cycles without creating bottlenecks at the glasswasher.

This rack suits bars, restaurants, hotels and event catering operations where glassware handling efficiency and breakage reduction matter. If your operation involves very tall stemware or unusually large glass formats, it is worth checking compatibility before ordering — we are happy to help you work through the right configuration.

The Cambro Camrack is a polypropylene glasswasher rack designed to hold up to 20 glasses per load. Each compartment is separated by a moulded barrier that keeps glasses apart during the wash cycle, reducing the risk of contact damage, chipping, or breakage. The open-base and open-top construction allows water and detergent to circulate freely around each glass, and draining is fast once the cycle is complete — minimising handling time between loads.

In a busy bar or restaurant, glassware throughput matters. The Camrack's design lets staff load and unload quickly, and because the rack moves directly from the glasswasher to the bar or storage shelf, it doubles as a carrying and short-term storage solution — reducing the number of times each glass is handled. The polypropylene construction holds up well to the repeated thermal cycling of commercial glasswasher use.

Practical advantages for front- and back-of-house teams include:

• Compartment barriers reduce glass-on-glass contact and breakage
• Open construction allows thorough wash coverage and fast draining
• Suitable for use as a wash rack, carry rack, and storage rack in one
• Stackable when loaded or empty, keeping storage areas manageable
• Accommodates glasses up to 257mm in height and 98.4mm in diameter

These racks are straightforward to use with any standard commercial undercounter or pass-through glasswasher. The 500 x 500mm footprint fits most glasswasher chambers designed around standard rack sizes. If you run a high-volume site with a wide mix of glassware — tall cocktail glasses, pint glasses, or stemware — it is worth checking glass diameter and height against the compartment specifications before ordering, as some larger glassware may not fit every slot.

The Camrack is well suited to pubs, bars, hotel bars, restaurants, and event catering operations where glassware is washed in volume throughout service. For sites that need a higher compartment count per load or different rack dimensions to match their machine, there are other configurations worth considering.

If you are unsure which rack size or configuration is the right fit for your glasswasher and glass range, we are happy to talk it through.

The Cambro Camrack is a polypropylene compartment rack designed to carry glassware safely through the glasswasher and then directly into storage or service without any need to handle the glasses individually. Each rack holds up to 20 glasses in separate compartments, with this blue variant accepting glasses up to 114mm in height.

In a busy bar or kitchen environment, reducing the number of times glassware is handled between the dishwasher and the bar top is one of the most practical ways to cut breakage and speed up service recovery. The Camrack system is built around that principle — glasses go in dirty, come out clean, and can be stored or transported in the same rack without being unpacked. The colour coding helps staff identify the correct rack for a given glass type immediately, which matters when multiple rack sizes are in rotation across a high-volume shift.

Practical operational benefits include:

• Colour-coded blue finish aids quick rack identification in multi-rack operations
• Compatible with the Cambro Camdolly for floor-level transport between areas
• Polypropylene construction resists warping and chemical damage from glasswasher detergents
• Designed to stack with matching Camrack covers for hygienic storage between service periods
• Reduces glass handling steps between wash and service, lowering breakage risk

The rack sits within the wider Cambro Camrack system, which includes compatible dolly trolleys and snap-on covers. If you are setting up a full rack system, it is worth considering how many racks you will need in rotation to maintain continuous glass supply through a peak service — this depends on your glasswasher cycle time and volume of covers per sitting.

This rack is well suited to bars, hotel operations, event catering, and any site running a dedicated glasswasher. For operations with taller stemware or larger glass formats, higher-profile Camrack variants are available across the range.

If you are unsure which compartment size or rack height works best for your glassware, the team is happy to help you work through it before you order.

The Cambro Camrack is a polypropylene compartment rack designed to carry glassware safely through the complete service cycle — from the glasswasher through to storage and back to the bar or service point. Each rack holds up to 20 glasses in individual compartments, accommodating glasses up to 92mm in height. The beige colouring allows easy visual identification on a busy bar or in a glass storage area where multiple rack types may be in use.

In practice, these racks are well suited to high-turnover bar and hospitality environments where glassware needs to move quickly and safely between wash and service. The compartmentalised design keeps glasses separated during the wash cycle, reducing the risk of chipping and breakage — a practical consideration in any operation with a significant glassware inventory. The polypropylene construction is durable under repeated commercial use and resists the heat and chemical exposure typical of commercial glasswasher cycles.

The Camrack system is designed to function as a 4-in-1 unit: washing, storing, transporting, and identifying glassware all within the same rack. This removes the need to transfer glasses between separate carriers at different stages, which reduces handling time and the associated breakage risk. Key operational advantages include:

• Eliminates multiple handling stages between wash and service
• Individual compartments protect glassware during the wash cycle
• Colour-coded beige finish aids rack identification in mixed-rack environments
• Compatible with the Camdolly transport system for safe floor-level movement
• Polypropylene construction withstands repeated glasswasher cycles

These racks are sized for standard commercial glasswashers that accept 500mm baskets, so it is worth confirming your machine's basket dimensions before ordering. The 92mm maximum glass height limits suitability to shorter glass profiles — tall-stemmed wine glasses or highball glasses will require a rack with a higher compartment clearance. For operations running a wide variety of glassware, it is worth considering whether a mixed rack selection would better cover the full range.

The Camrack is a practical choice for pubs, hotels, restaurants, and contract catering operations handling moderate to high glass volumes. Sites running very large glass counts across multiple service points may benefit from looking at higher-capacity or deeper-compartment options within the Camrack range.

If you are unsure whether the compartment height or rack configuration suits your glassware profile, the team is happy to help you work through the options before you commit to an order.

The Cambro Camrack is a polypropylene glass rack designed for use in commercial glasswashers. This beige 16-compartment version holds glasses up to 196mm tall and fits the standard 500 x 500mm footprint common to most commercial glasswasher models. It is a straightforward, workhorse piece of smallware used widely across bars, restaurants, hotels, and contract catering operations.

The open-top construction allows water and detergent to reach all surfaces of the glassware during the wash cycle, supporting a thorough clean without obstruction. The same open design encourages airflow after the cycle, which assists drying and helps reduce the need for manual polishing or drying between services — useful when turnaround time at the bar or pass is tight.

Each of the 16 compartments is separated by plastic guards that prevent glasses from making contact with one another during washing. This reduces the risk of chipping, scratching, and breakage — damage that in a busy operation adds up quickly in replacement costs.

• Fits standard 500 x 500mm commercial glasswashers
• Compartment guards protect glassware from contact damage during washing
• Open-top design supports thorough washing and natural drying
• Suitable for stacking, allowing efficient post-wash storage and service transport
• Polypropylene construction handles high-temperature wash cycles reliably

The rack stacks after washing, which means it can move directly from the glasswasher into storage or back to the bar without unpacking — a small but practical advantage during a busy service period.

This model suits operations with moderate glass volumes. Sites running high-turnover services across multiple stations may want to consider higher-capacity rack configurations to maintain an efficient wash cycle rotation.

If you are unsure how many racks suit your service volume or whether this configuration fits your glasswasher, we are happy to talk it through.

The Cambro Camrack is a polypropylene glass rack designed to carry glassware through the full handling cycle — glasswasher, draining, storage, and return to service — without glasses ever needing to leave the rack. This 20-compartment version in blue accommodates glasses up to 156mm in height, covering a wide range of standard tumblers and stemless wine glass formats commonly found in bar and hospitality operations.

In high-turnover environments, the value of a rack like this lies in what it removes rather than what it adds. Each unnecessary transfer between carriers is a point where glass breakages occur and service slows down. By keeping glasses in the same rack from wash through to bar, operations reduce handling time and protect stock during peak service periods. The polypropylene construction holds up well under repeated commercial glasswasher cycles, resisting the warping and surface degradation that affects lower-grade alternatives over time.

The blue colour coding becomes particularly useful in multi-rack operations where different compartment sizes are used for different glass types. Assigning colours to configurations makes it straightforward for bar and cellar staff to sort and rotate stock correctly during busy periods without confusion.

• Eliminates glass handling between washing, storage, and service stages
• Blue colour coding supports organised stock rotation across multiple rack sizes
• Polypropylene construction withstands repeated commercial wash cycles reliably
• Reduces breakages caused by unnecessary transfers between carriers
• Compatible with Cambro Camdolly and Camrack cover for a complete transport system

This rack suits bars, hotels, event venues, and contract caterers managing consistent glass volumes. Operations running a broader range of glass sizes may find it worth considering other compartment configurations alongside this one to cover the full inventory.

If you are specifying Camracks across a larger operation or want to confirm compatibility with your existing glasswasher or Camdolly setup, we are happy to talk it through.

The Cambro Camrack is a polypropylene glass rack designed to protect glassware during transport between service areas, bar runs, and commercial dishwashers. The 16-compartment configuration holds individual glasses securely in separate cells, preventing contact and reducing the risk of chipping or breakage during handling. It accepts glasses up to 92mm in height, making it well suited to standard tumbler and stemless wine glass formats commonly used in pubs, hotels, and contract catering operations.

In busy service environments, glassware losses through handling damage are a genuine operational cost. A rack like this helps operators move glassware efficiently — from bar to kitchen and back — without relying on staff to carry loose glasses by hand. The polypropylene construction is resistant to high temperatures and cleaning chemicals, which means the rack can go through a commercial glasswasher alongside the glassware it carries, or be cleaned down at the end of service without concern for warping or degradation.

Practical benefits for front- and back-of-house teams include:

• Protects glassware from contact damage during transport and washing
• Polypropylene resists high temperatures up to 93°C and commercial cleaning chemicals
• 16 individual compartments keep glasses separated and stable
• Stackable design supports efficient storage between service periods
• Lightweight construction at 2.48kg makes it easy to handle when loaded

These racks are straightforward to use and require no installation, but it is worth checking compatibility with your existing glasswasher or dishwasher before ordering. The 500 x 500mm footprint is a standard rack size, so it will fit most commercial glasswasher baskets, though confirming internal dimensions with your machine's documentation is sensible practice. The 92mm maximum glass height suits shorter tumbler-style glassware; operators carrying taller glasses such as highballs or stemware should look at a rack with a higher compartment clearance.

This rack is a practical choice for bars, pubs, hotel banqueting operations, and any catering environment that moves significant volumes of glassware during service. For sites running higher glass throughput, multi-rack trolley systems and complementary rack dolly options are worth considering alongside.

If you're unsure whether this rack configuration suits your glassware profile or existing warewashing setup, we're happy to help you work through it.

The Cambro Camrack is a polypropylene glass rack designed to carry glassware through every stage of a busy service operation without the need to transfer between containers. The 16-compartment blue version accommodates glasses up to 258mm in height and forms part of Cambro's 4-in-1 system, meaning a single rack handles washing, drying, storage, and transport from pot wash to bar or pass.

In practice, keeping glassware in the same rack throughout the cycle reduces handling time and cuts the risk of breakage during peak service. Staff spend less time sorting and decanting, and the rack moves directly from the dishwasher onto a shelf or trolley without an intermediate step. The blue colour coding is a straightforward way to separate glassware by type or service area across a site — particularly useful in high-turnover environments where verbal sorting instructions are easy to miss.

• Single rack used for washing, storage, transport and visual identification
• Blue colour coding supports fast sorting across multiple service areas
• Polypropylene construction is dishwasher-safe and resists warping under repeated use
• Compatible with the Camdolly trolley system for safe movement between areas
• Accepts a Cambro rack cover for hygienic stacking during storage

Because these racks work as part of a modular system, the number you need depends on wash cycle frequency, storage space, and how many covers are in service at any one time. A venue running continuous bar service or multiple sittings will generally require more racks in rotation than a lower-volume operation.

If you are working out how many racks to specify, or want to confirm that the 258mm compartment height suits your glassware, we are glad to help you think it through before you order.

The Cambro Camrack is a polypropylene compartment rack designed to carry glassware through the full cycle of commercial glasswasher use — from dirty collection through washing, through to clean storage and service transport. The 20-compartment beige version accepts glasses up to 197mm tall, making it suitable for a wide range of standard tumbler and stemless wine glass formats commonly used in bars, pubs, hotels, and contract catering operations.

The practical value of the Camrack system is that the glasses never need to leave the rack. Staff load dirty glasses directly into the rack at the bar or service point, the whole rack goes through the glasswasher, and the clean glasses are stored or transported in the same unit. This removes the handling stage that most commonly causes breakages, and it reduces the time bar staff spend unloading and reloading glassware between each wash cycle.

• Eliminates repeated glass handling between collection, washing, and storage
• Beige colour coding supports rack identification and sorting across a busy bar operation
• Polypropylene construction is durable, lightweight, and dishwasher-safe
• Compatible with the Camdolly transport system and Camrack covers for a complete glassware management solution
• Stackable design aids storage when racks are not in active circulation

Because the rack passes through the glasswasher as a complete unit, it is worth confirming that your existing glasswasher has sufficient internal clearance to accept the rack dimensions before ordering. The system works best when enough racks are in circulation to cover the full wash cycle without service interruption — the number of racks required will depend on your glass turn and wash cycle time.

The Camrack 20-compartment rack is well suited to medium-volume bar and beverage operations. For sites with higher glass throughput or larger glass formats, alternative compartment configurations and rack sizes are available within the Camrack range. If you are specifying racks across a new or refurbished bar, the team is happy to help work out the right quantity and configuration for your operation.

The Cambro Camrack is a 16-compartment glass rack designed to take glassware through every stage of a busy service operation without the glasses ever needing to be decanted. Load the glasses into the rack, run them through the glasswasher in it, store them in it, and transport them directly to the bar or service point on a compatible Camdolly. The red colour coding allows teams to identify rack type at a glance, which becomes genuinely useful in high-volume operations running several rack configurations alongside one another.

In practice, reducing the number of times glassware changes hands over a shift makes a measurable difference. Fewer touchpoints mean fewer breakages, less handling time, and a faster turnaround between the wash area and the bar. That is where the Camrack system earns its keep — not in any single feature, but in the cumulative reduction of repetitive manual handling across a long service.

• Wash, store and transport glassware in a single rack without decanting
• Red colour coding supports clear identification across multi-rack operations
• 16 individual compartments keep glasses separated and protected through the wash cycle
• Compatible with Cambro Camdolly for safe transport between wash and service areas
• Accepts glasses up to 258mm in height

Before ordering, confirm that your glasswasher basket dimensions are compatible with the Camrack footprint and that your glassware falls within the 258mm height limit. For taller stemware or larger bowl glasses, a different compartment count or height specification within the Camrack range may be more appropriate. The rack works as part of a broader Cambro system including covers and dollies, and the components are designed to be matched correctly for the system to function as intended.

The Camrack suits bar operations, hotels, event caterers and any venue washing and redistributing glassware at volume. Sites running a wider variety of glass sizes or significantly higher throughput may benefit from reviewing the full range of compartment configurations and height specifications available.

If you are unsure whether this specification suits your glassware and service setup, we are happy to talk it through before you place an order.

The Cambro Camrack is a polypropylene glass rack designed to handle glassware through multiple stages of a commercial operation without the glasses ever needing to leave the rack. Glassware is loaded, passed through the glasswasher, stored, and transported to the bar or service point all within the same unit. The blue colour coding is a practical feature in busy environments where racks of different sizes or types need to be identified quickly across a bar or pot wash area.

With 20 individual compartments and a maximum glass height of 197mm, this rack suits standard tumbler and stemless wine glass sizes commonly used in pubs, hotel bars, restaurant service areas, and event catering operations. The compartment design keeps glasses separated during the wash cycle, reducing breakage and improving wash results by allowing water and detergent to reach each glass properly. The polypropylene construction handles repeated commercial glasswasher cycles reliably and resists the impact and chemical exposure typical in high-throughput bar environments.

From an operational standpoint, the Camrack system offers a number of practical advantages:

• Reduces glass handling between wash, storage, and service — lowering breakage rates
• Colour coding supports fast rack identification during busy service periods
• Compatible with Cambro's Camdolly for floor-level transport and storage
• Compatible with Cambro rack covers for hygienic storage between services
• Polypropylene construction withstands repeated glasswasher cycles and cleaning chemicals

It is worth confirming that the glasses you intend to use do not exceed the 197mm compartment height before ordering — taller stemware or certain pint glasses will require a rack with deeper compartments. The rack dimensions should also be checked against your glasswasher's internal basket clearance to confirm compatibility.

This rack is well suited to bars, pub operations, hotel food and beverage departments, and event caterers who handle moderate to high glass volumes and want a system that reduces breakage and keeps glassware organised through the full wash and service cycle. For operations running significantly higher glass volumes or requiring a greater number of compartments, larger rack formats are available within the Camrack range.

If you are building out a full Camrack system with dollies and covers, or are unsure which compartment size best matches your glassware, we are happy to help you work through the options.

The Cambro Camrack is a polypropylene glass rack designed around a practical 4-in-1 principle: glassware is washed, stored, identified, and transported within the same unit. The 20-compartment configuration accommodates glasses up to 156mm in height, making it suitable for a wide range of standard bar and restaurant glassware including tumblers, wine glasses, and small hi-balls.

In a busy bar or kitchen environment, the Camrack system reduces the number of times glassware is handled between the glasswasher and the service point. Racks move directly from machine to storage or service without decanting, which reduces breakage risk and speeds up post-service turnaround. The beige colour coding supports rack identification where different glass types or sizes are in use across the same site.

Practical operational advantages include:

• Direct glasswasher-to-storage workflow with no intermediate handling
• Colour coding for quick visual identification of glass type or size
• Polypropylene construction resists warping and is straightforward to clean
• Compatible with Camdolly transport dollies and Camrack covers for stacking and covered storage
• Consistent compartment sizing protects glassware during washing and transit

No water, gas, or electrical connections are required. The rack is designed to fit standard glasswasher basket dimensions, though it is worth confirming compatibility with your specific machine before ordering, particularly with older or non-standard glasswasher models. At 6.67kg the rack is manageable when empty, but loaded weight should be considered if staff are transporting multiple racks on a dolly.

The 20-compartment Camrack is well suited to bars, hotel food and beverage operations, and restaurant back-of-house where glassware throughput is consistent and rack organisation supports efficient service. Sites with very high-volume glassware turnover may benefit from a higher-compartment configuration or additional racks to keep pace with demand.

If you are unsure which compartment size or colour code best fits your glassware range, our team is happy to help you work through the options.