Other Baskets, Trays and Inserts

Open Plastic Rack 450 x 450 x 165mm
Open Wall Construction

This is a 390mm square wire glasswasher basket designed for use with commercial glasswashing machines. Wire baskets of this format are a standard consumable in bars, pubs, restaurants, and hospitality venues where glasswashers run continuously through a service.

In day-to-day use, these baskets take considerable punishment — loaded, run through cycles repeatedly, stacked when wet, and handled quickly during busy service. A well-made wire basket holds its shape under that routine and keeps glasses supported correctly so they wash cleanly without tipping or nesting against each other.

Practically speaking, having the right number of baskets in rotation matters as much as the machine itself. Running too few means bottlenecks during peak service; having a reliable stock of correctly sized baskets keeps throughput steady.

• Standard 390mm square footprint suits most undercounter glasswashers
• Wire construction allows water and detergent to circulate freely around glassware
• Straightforward to rinse down and stack between services

This basket is suited to bars, pubs, hotels, and any venue running a 400mm-class glasswasher. If your operation runs a larger passthrough or hood machine, a different basket format will likely be required — it is worth confirming compatibility with your machine before ordering multiples.

If you are unsure how many baskets your operation needs, or whether this size is correct for your glasswasher, the team is happy to help you work that out.

Cambro PR314151 9 x 9 Peg Dishwasher Basket.

Designed to wash varying sized plates, bowls, trays and plate covers, the standard 9 x 9 peg racks hold approximately:
Eighteen 10" (25,4 cm) plates,
Twelve 12" (30,5 cm) plates,
Twenty seven 19 cm plates or
Nine 14" x 18" (36 x 46 cm).

Supplied as standard in a soft grey base with an Internal height 67mm and an External height 102mm.

• Length: 290mm
• Width: 90mm
• Height: 75mm
• Plastic
• Grey

Cup/Glass Rack 500 x 500 x 101mm

COLOUR MAY VARY

This is a 500mm square wire glasswasher basket with a plastic coating, designed to fit standard 500mm undercounter and passthrough glasswashers commonly used in bars, pubs, and catering operations. The plastic coating protects both the basket frame and the glassware during the wash cycle, helping to reduce chipping and extending the working life of the basket itself.

In a busy bar or service environment, having the right number of baskets in rotation is as important as the machine itself. A well-matched basket keeps the workflow moving — glasses loaded, cycled, and back in service without bottlenecks. Wire baskets of this type are well suited to frequent daily use and are straightforward to rinse down and inspect between cycles.

• Plastic coating cushions glassware and protects the wire frame from corrosion
• Fits standard 500mm glasswashers used across bars, pubs, and catering kitchens
• Open wire construction allows free water and detergent circulation during the wash
• Simple to stack and store when not in rotation
• Practical replacement or additional basket for existing 500mm machines

It is worth confirming compatibility with your specific machine before ordering, as basket dimensions and peg configurations can vary between manufacturers even within the 500mm footprint. If you are equipping a new operation or replacing a full set, the team are happy to advise on how many baskets typically suit a given service volume.

Cutlery Insert 8 Compartment

COLOUR MAY VARY

Plate Rack 500 x 500 x 101mm

COLOUR MAY VARY

Cambro BR414151 500mm x 500mm Base Basket.

An open standard rack that is durable for pots, pans, bowls and other large preparation, service and display items.

Supplied as standard in a soft grey colour base and one extender.

With and internal height of 108mm and overall height 153mm.

Glass Rack 350mm Square

Grid for Baskets 460mm x 460mm

Cambro BR258119 Ware washing Base Basket.

An open standard rack that is durable for pots, pans, bowls and other large preparation, service and display items.

Supplied as standard in a soft grey colour base.

With and internal height of 67mm and overall height 102mm.

Fits 400x400mm open baskets The Classeq dish insert is a great solution for improving the flexibility of your open baskets. Specifically designed for 400x400mm open wash baskets, the insert simply allows plates and dishes to be racked in baskets which otherwise wouldn't be suitable. Perfect for sites where occasional dish or plates are washed. Can be fitted or removed easily.

200(H)x500(W)x100(D)mm. Fits Classeq C500 range The Classeq glass basket insert is a great solution for improving wash results. Specifically designed for 500x500mm baskets, the rack tilts glasses at an optimum angle to allow the washer better access to the interior of glassware. Can be fitted or removed easily.

200(H)x400(W)x100(D)mm. Fits Classeq C400 range The Classeq glass basket insert is a great solution for improving wash results. Specifically designed for 400x400mm baskets, the rack tilts glasses at an optimum angle to allow the washer better access to the interior of glassware. Can be fitted or removed easily.

This is a replacement or additional wash basket designed specifically for Classeq C500 series warewashers. It follows the standard 500x500mm footprint used across that range and features tall open sides rather than the lower-profile design typically used for crockery. That height difference is what makes it suited to glasses and cups, which need upright support to wash and drain properly without toppling or nesting inside one another.

In a busy bar or front-of-house environment, having a dedicated glass basket rather than improvising with a general-purpose one makes a meaningful difference to throughput. Glasses sit more securely, the open construction allows water and detergent to reach all surfaces, and the taller sides reduce the risk of items shifting mid-cycle. For venues running continuous glasswashing during service, having a second or third basket in rotation — one washing, one being loaded, one being unloaded — is a straightforward way to keep the machine moving without interruption.

The basket is constructed from plastic, which keeps it light enough to handle repeatedly during a shift without operator fatigue becoming an issue. At 2kg unladen, it is easy to carry even when loaded with glassware.

A few practical points worth noting: this basket is sized for the Classeq C500 range and may not be compatible with machines from other manufacturers or Classeq models that use a different basket footprint. It is worth confirming your machine model before ordering if you have any doubt.

If you are unsure whether this basket suits your machine or want to discuss how many baskets make sense for your service volume, the team is happy to help you work that out.

The Cambro Camrack is a purpose-built glass rack designed to protect stemware and glassware through the full handling cycle — from the glasswasher through to storage and transport. This beige, 9-compartment version accommodates glasses up to 174mm in height and 149mm in diameter, making it suitable for a wide range of standard bar and restaurant glassware including wine glasses, water glasses, and cocktail stems.

Constructed from polypropylene, Camracks are built to withstand repeated glasswasher cycles without warping or degrading. The compartment dividers hold each glass individually, preventing contact between pieces during washing and transit — which is where most breakages occur in a busy service environment. The rack stacks securely, which helps with storage efficiency in areas where space is limited.

In practice, these racks are commonly used in hotel bars, restaurant operations, and banqueting kitchens where glassware turnover is high and breakage costs add up quickly. Key operational advantages include:

• Individual compartments prevent glass-to-glass contact during washing and handling
• Polypropylene construction tolerates repeated commercial glasswasher cycles
• Stackable design supports compact storage between service periods
• Standardised 500 x 500mm footprint fits most commercial glasswasher baskets
• Beige colouring aids colour-coded rack organisation by glass type

Before ordering, measure both the height and rim diameter of your glassware carefully. The 9-compartment configuration suits larger glass profiles, but if you're running smaller glasses with a narrower diameter, a higher-compartment rack may give you better throughput per cycle. Cambro produce the Camrack in several compartment configurations, so matching the rack to your glass dimensions is important for both protection and wash efficiency.

This rack is well suited to operations with moderate glassware volume and a need for reliable, repeatable protection through the wash cycle. For higher-volume sites turning over large quantities of glassware continuously, it's worth considering how many racks you'll need in rotation to maintain service flow.

If you're unsure which compartment size suits your glassware, or how many racks your operation needs, we're happy to help you work it out before you order.

for D400 and G400 warewashers Plate basket with plate locks to securely hold plates in position.

The Cambro Camrack is a nine-compartment glasswasher rack designed to organise and protect glassware during machine washing cycles. Each compartment holds a single glass and is separated from the next by polypropylene dividers, which prevent contact between glasses throughout the wash. The rack accommodates glasses up to 215mm in height and fits the majority of commercial glasswashers in common use across bars, restaurants, and hospitality operations.

In a busy bar or restaurant setting, glassware breakage is a recurring cost. The compartmentalised design keeps glasses isolated during the full wash cycle, reducing the knocking and vibration that causes chips and cracks. The open-cell construction allows water and detergent to reach the full surface of each glass, and drainage after the cycle is fast enough to minimise the time glasses spend sitting wet — useful during a tight turnaround between services.

From an operational standpoint, the rack offers a few practical advantages worth noting:

• Polypropylene construction resists impact, heat, and corrosion under daily commercial use
• Stackable profile keeps storage requirements compact during quiet periods
• Ergonomic handles allow safe and comfortable carrying when the rack is fully loaded
• Open design supports thorough drainage, reducing the need for manual drying
• Easy to rinse down and keep clean between wash cycles

No installation is required. The rack simply loads into your existing glasswasher in the same way as any standard rack. It is worth confirming the internal dimensions of your machine before ordering, particularly the interior height clearance, to ensure the rack sits correctly with your tallest glasses loaded.

This rack is well suited to smaller bar operations, café setups, or as part of a larger rack fleet in higher-volume venues. Where a site is running a high volume of covers and needs to cycle glassware rapidly through several machines simultaneously, it is worth considering how many racks are needed to support uninterrupted service flow rather than relying on a single unit.

If you are unsure whether this rack is compatible with your glasswasher or want to work out the right quantity for your operation, the team is happy to help you think it through before you order.

The Cambro Camrack is a nine-compartment polypropylene rack designed to hold glassware securely through a commercial glasswasher cycle. Individual dividers keep glasses separated throughout washing and transit, reducing the risk of contact damage that is common when glasses are loaded loosely. The open-frame construction allows water and detergent to reach all surfaces freely and drain away cleanly once the cycle ends.

In bar and hospitality environments where a glasswasher runs continuously across a service, this kind of rack does straightforward but important work. Polypropylene handles repeated exposure to high wash temperatures and commercial detergents without warping or degrading over time. The beige colouring also supports colour-coding systems where operations separate racks by glass type or service area — a simple organisational tool that can reduce errors during a busy shift.

From a practical standpoint, the rack offers several clear operational advantages:

• Individual compartments prevent glass-to-glass contact during both washing and transport
• Open construction supports thorough water coverage and fast post-cycle drainage
• Stackable format keeps storage compact when racks are not in use
• Handles allow loaded racks to be lifted and moved without difficulty
• Polypropylene resists impact, heat, and chemical exposure through heavy daily use

The 257mm internal height accommodates a wide range of common bar glassware, but taller items such as certain pilsner glasses or cocktail stems may not fit and would need a tall-rack alternative or separate wash arrangement. It is worth confirming your glasswasher's internal basket dimensions before ordering, particularly with compact or undercounter machines where clearance can vary.

This rack suits pubs, bars, restaurants, and hotels running regular glass volumes through a commercial glasswasher. Higher-volume operations may want to hold more racks in rotation to keep pace with peak service demand.

If you are not sure whether this rack is compatible with your glasswasher or glassware range, the team can help you check before you commit to an order.

Dimensions: 101(H) x 500(W) x 500(D)mm Durable mesh base design. Suitable for soaking and washing all flatware and utensils.

5 x 9 peg rack Holds standard plates in one direction and deep plates and bowls in the other direction.

Cover for dishracks Use this Cambro DRC2020180 Camrack full rack cover to cover and protect full size Camrack dishracks filled with clean dishware. It eliminates the use of messy, time-consuming plastic wrap or vinyl covers while serving as a vital component to your Camrack storage system. When combined with the Cambro Camdolly (CT307) it creates a portable sanitary storage system which protects your clean dishware and glassware between uses.

Dimensions: 100(H) x 500(W) x 500(D)mm The rack is made from highly durable polypropylene which makes it highly resistant to high temperatures up to 93 degrees Celsius and cleaning chemicals. These racks are also available in 9 other colours which means they are ideal for setting up a colour-coded cleaning system, helping you to quickly identify glassware types whilst in storage. With closed sides, the racks also keep your pots, pans and bowls sanitary once cleaned, so they will remain fresh until next use to save extra time and effort on cleaning.

• Width: 110mm
• Depth: 110mm
• Height: 130mm
• Grey
• Plastic

• Width: 130mm
• Diameter: 110mm
• Features: Plastic singular circular cutlery insert. Used to hold knives, forks and spoons.
• Grey.

This is a 500mm square wire plate basket designed for use in commercial rack or pass-through dishwashers that take a 500mm basket format. The frame is plastic-coated wire, which protects both the basket structure and the crockery it carries during the wash cycle.

In a busy kitchen environment, plate baskets take a considerable amount of daily punishment — loaded, unloaded, stacked, and pushed through the machine repeatedly across a full service. A well-constructed wire basket holds its shape under this routine use and keeps plates stable during the wash, reducing the risk of chips or breakage from plates shifting mid-cycle.

The plastic coating serves a practical purpose beyond corrosion resistance: it softens the contact points between the wire and the plate rim, which helps protect crockery over time. It also makes the basket easier to handle and stack when hot.

• Compatible with standard 500mm commercial dishwasher and warewasher systems
• Plastic coating protects crockery and resists corrosion
• Open wire construction allows water and detergent to reach all surfaces
• Stable plate positioning reduces movement and breakage during washing
• Straightforward to clean and dry between service periods

This basket is suited to most food service operations running a 500mm machine — from restaurant and pub kitchens to staff canteens and event catering. If your site runs particularly high plate volumes or operates multiple machines, it is worth considering whether a larger basket inventory would better support your throughput.

If you are unsure whether this basket is compatible with your existing machine or need to discuss quantities for a full kitchen setup, the team is happy to help.

Plate Rack 450mm Square