Cup Lids

The Bonzer 13013-02 is a countertop-mounted dispenser designed to hold disposable cups and lids in a tidy, accessible arrangement at the point of service. Rather than leaving stacks of cups loose on the counter, the holder keeps them upright, protected, and ready to grab during busy periods — a small but practical improvement to any beverage station.

In high-turnover café and coffee bar environments, cluttered counters slow service and create hygiene risks. A dedicated cup and lid holder removes the guesswork, keeps consumables within easy reach, and reduces the chance of cups being knocked over or contaminated. The spring-tensioned mechanism is calibrated to release one cup at a time, which helps maintain a consistent flow without fumbling during peak service.

• Keeps cups and lids organised and accessible at the service point
• Spring-tension mechanism releases one cup at a time for clean, quick service
• Accommodates a range of cup and lid sizes across its compartments
• Compact footprint suits tight countertop layouts
• Wipe-clean plastic construction supports basic hygiene routines

Installation is straightforward — the unit sits on the countertop without any fixings required. It is suited to cafés, quick-service outlets, hospitality bars, and anywhere disposable cups are used at volume. For sites running very high cup volumes across multiple service points, it is worth considering whether a wall-mounted or under-counter dispensing solution would better suit the workflow.

If you are unsure whether this model matches your cup or lid sizes, or want to discuss how it fits into a wider beverage station setup, the team is happy to help you work that out before you order.

This pack provides 300 single-wall paper hot cups in a 12oz size, each supplied with a white polystyrene lid. The cups are manufactured from paper with a PE lining, which makes them compatible with specialist paper cup recycling streams, though it is worth checking local authority guidelines before making disposal arrangements.

For takeaway and counter service operations, having a ready stock of matched cups and lids simplifies the service point and reduces the chance of mismatched sizes causing spills or complaints. The tight-fitting lid helps retain heat during handover and keeps drinks secure for customers on the move. The 12oz size is a standard format across the industry and works well for regular coffees, teas, and hot chocolates.

• Single-wall paper construction with PE lining
• Tight-fitting polystyrene lid included per cup
• 12oz capacity suits standard hot drink servings
• PE-lined paper compatible with specialist recycling streams
• Bulk pack of 300 reduces reorder frequency

These cups are straightforward to store and require no special conditions. As a single-wall design, they offer only basic heat insulation — for operations where customers will be holding drinks for longer periods, a separate cup sleeve or a double-wall alternative may be worth considering. Compatible cup sleeves are available separately within the range.

This pack suits cafés, canteens, event catering, and any takeaway operation running a consistent volume of hot drink service. For very high-volume sites looking to reduce cost-per-cup, it may be worth exploring larger bulk formats.

If you're unsure which cup format or volume best fits your operation, the team is happy to help you work it out.

This pack contains 350 single-wall paper hot cups with fitted polystyrene lids, designed for serving hot drinks in takeaway and grab-and-go environments. The cups are manufactured from paper with a PE lining and hold a standard 8oz volume, making them compatible with most commercial espresso and filter coffee set-ups.

For light to moderate takeaway drink service — whether that's a café counter, a hospitality trolley, or a staff canteen — these cups offer a practical, no-fuss solution. The tight-fitting lids help reduce spillage during handover and retain heat during short transit, which matters during a busy morning service.

• Single-wall paper construction with PE lining
• Polystyrene lids included — no separate lid purchase required
• Standard 8oz size suitable for most espresso-based and filter drinks
• PE-lined cups recyclable via specialist recycling streams
• Pack of 350 reduces replenishment frequency in moderate-volume sites

It's worth noting that single-wall cups offer limited hand insulation on their own. For environments where customers carry drinks any distance, or where complaints about heat transfer are common, a cup sleeve — available separately — is worth considering. These cups are not suitable for cold drinks service.

This pack is well suited to smaller cafés, hospitality venues, and workplace catering operations running a takeaway drinks offer. For higher-volume sites turning over a large number of hot drinks daily, a larger pack size or a heavier-gauge cup may be more cost-effective in the longer run.

If you're unsure which cup specification suits your service volume or drink range, the team is happy to help you work it out.

These paper lids from Fiesta are designed to fit the Fiesta range of recyclable portion pots in 50ml, 80ml, and 100ml sizes, which are sold separately. Made with a PET construction, the lids provide a secure fit that keeps portioned condiments, sauces, dressings, and similar items contained during service and transit.

In a busy kitchen or front-of-house environment, having a reliable lid that fits consistently across multiple pot sizes reduces the need to stock separate lid formats and simplifies counter management. The lids follow the same recycling stream as PE-lined disposable hot cups, meaning they can be recycled together with the pots rather than separated at the point of disposal — a practical consideration for operators managing waste and sustainability commitments.

• Fits the full Fiesta recyclable portion pot range across three sizes
• Recyclable through the same stream as PE-lined disposable cups
• PET construction provides a reliable, consistent fit
• Supplied in bulk packs of 1000 for ongoing service use

These lids are well suited to cafés, canteens, food-to-go operations, and any service where portioned accompaniments are a regular part of the offer. If your operation uses a high volume of portion pots across multiple sizes, it is worth confirming compatibility with your current pot range before ordering. The team is happy to help if you have any questions.

These are Vegware's 79-Series lids for 8oz hot cups, made from CPLA — a plant-based material derived from corn starch rather than oil. They are designed to sit securely on Vegware's compatible 8oz cups and help prevent spills during takeaway service. Like all Vegware products, they are certified compostable and will break down in a commercial composting facility within a matter of weeks.

In a busy café or takeaway environment, the practical case for compostable packaging has become straightforward: many operators are reducing single-use plastics either by choice or to meet local waste commitments, and switching to certified compostable lids is one of the more manageable steps. These lids perform in the same way as a conventional plastic lid during service — they seat properly, resist heat, and handle the pressures of high-volume counter service without issue.

• Certified compostable — suitable for commercial composting waste streams
• Made from CPLA, a plant-derived material with a significantly lower carbon footprint than oil-based plastics
• Compatible with Vegware's 8oz hot cup range
• Supplied in cases of 1000, practical for high-turnover service
• Lightweight at 2g per lid, reducing packaging waste volume

One practical point worth noting: the composting benefit is only fully realised if you have access to a commercial composting collection service. These lids are not suitable for home composting bins and should not go into standard recycling. If your current waste contractor does not collect compostable materials, it is worth confirming this before committing to a full switch.

These lids are well suited to coffee shops, cafés, street food operators, and contract caterers running takeaway services who are working towards reducing landfill waste. If you are fitting out a new site or reviewing your disposables range more broadly, our team is happy to talk through the options.

These are compostable hot cup lids from Vegware, designed to fit 12oz and 16oz cups in the 89-series range. Made from CPLA — a plant-based material derived from corn starch rather than oil — they offer a like-for-like replacement for conventional plastic lids in takeaway and self-serve coffee operations.

In a busy café or catering environment, lids need to seat securely and retain heat without failing under the pressure of a rushed service. These perform reliably in that context, helping to reduce spills and keep drinks at temperature during handoff — whether that's across a counter, at an event, or in a grab-and-go setup. The CPLA material holds its shape under hot liquid contact, which is a common failure point with cheaper compostable alternatives.

• Fully compostable via industrial composting facilities
• Lower embodied carbon than conventional plastic lids
• Consistent fit across Vegware 12oz and 16oz hot cup range
• Supplied in bulk quantities suited to continuous service
• Supports operators working towards single-use plastic reduction

These lids are intended for industrial composting rather than home composting or general recycling — operators should confirm collection arrangements with their waste contractor before switching. They won't be the right choice for sites without access to commercial composting infrastructure.

Well suited to cafés, contract caterers, event companies, and any operator already using Vegware cups who wants a matched lid that fits their sustainability reporting. For lower-volume settings, smaller pack sizes may be more practical to avoid stock wastage.

If you're working through a broader switch to compostable disposables or need to check compatibility with your existing cup stock, we're happy to talk it through before you order.

These Vegware domed cold cup lids are designed to fit the 96-series range of Vegware compostable cold cups in both 12oz and 16oz sizes. The raised dome profile provides clearance for whipped cream, soft-serve toppings, and layered cold drinks, allowing cups to be lidded and handed out without disturbing the presentation.

Made from PLA — a plant-based plastic derived from renewable crop starch — these lids are commercially compostable and will break down within 12 weeks when sent to an appropriate composting facility. For operators already running a compostable packaging programme, they integrate straightforwardly into an existing waste stream.

In practical front-of-house use, the lids work well on iced coffees, cold brew, blended drinks, and any cup requiring headroom above the rim. The domed format is a common choice in café and quick-service settings where drinks are built with cream or decorative toppings and need to travel safely to the customer.

• Reduces packaging waste for operators committed to composting schemes
• Dome clearance protects toppings during handover and takeaway
• Compatible with Vegware's 96-series compostable cold cups (sold separately)
• Lightweight PLA construction keeps pack weight low for storage and handling
• Pack of 1000 suits medium to high-volume service without frequent reordering

Worth noting: commercial composting facilities are required to break these down within the stated timeframe — standard kerbside food waste collections are not always suitable. Operators should confirm their waste contractor accepts PLA before switching from conventional plastic lids.

These lids suit cafés, coffee shops, quick-service restaurants, and event catering operations looking to move away from oil-based plastics without changing their existing cold cup format. If your service volume is particularly high or you use a different cup series, it is worth checking compatibility before ordering in bulk.

If you have questions about fitting these into a broader compostable packaging setup, our team is happy to talk it through.

These Fiesta lids are designed to fit 340ml (12oz) hot drink cups and are made from bagasse — a by-product of sugarcane processing that would otherwise go to waste. They are certified for commercial composting, breaking down within 12 weeks when processed through an appropriate composting facility.

For cafés, coffee shops, and takeaway operators looking to reduce single-use plastic waste, these lids offer a straightforward swap. They perform as you'd expect from a standard hot cup lid — secure fit, adequate heat retention for drinks-to-go — while supporting waste diversion commitments that many operators now need to evidence to customers, procurement teams, or local authority schemes.

• Made from bagasse, a renewable sugarcane by-product
• Commercially compostable within 12 weeks after use
• Secure fit for 340ml / 12oz hot drink cups
• Supplied in a pack of 1000 for consistent stock management
• Suitable for coffee, tea, and other hot drinks-to-go

One practical consideration worth noting: commercial composting requires access to an appropriate composting facility — these lids will not break down effectively in general waste or home compost bins. Operators should confirm their waste contractor can accept certified compostable packaging before switching, otherwise the environmental benefit is lost.

These lids are well suited to coffee shops, cafés, canteens, and event catering operations running a 12oz hot cup format and working toward a plastic-free or reduced-plastic front-of-house setup. If your operation uses multiple cup sizes, it is worth checking compatibility across your range before ordering in volume.

If you are reviewing your full disposables range or want to confirm compatibility with your current cup stock, the team is happy to help.

These Fiesta bagasse lids are designed to fit 225ml (8oz) disposable hot cups and are made from sugarcane fibre — a by-product of sugar processing that would otherwise go to waste. They are certified for commercial composting, breaking down within approximately 12 weeks at an accredited composting facility, making them a practical alternative to conventional plastic lids for operators looking to reduce landfill waste.

In a busy café, canteen, or takeaway environment, lids like these are a high-turnover consumable. The bagasse construction provides a reasonably snug fit that helps retain heat during transit, which matters when customers are carrying drinks away from the counter. The material handles normal hot beverage temperatures reliably without distortion under typical service conditions.

• Made from recycled sugarcane fibre — a renewable, waste-derived material
• Commercially compostable within approximately 12 weeks after use
• Fits standard 225ml / 8oz disposable hot cups
• Helps divert single-use waste from landfill as part of a wider composting programme
• Supplied in a pack of 1000, supporting consistent stock levels in high-turnover service

One practical consideration worth noting: commercial composting requires access to an accredited composting facility. These lids are not suitable for home composting bins and should not be placed in standard recycling streams. If your site does not yet have a commercial composting collection arrangement in place, it is worth confirming that before switching over, to ensure the environmental benefit is actually realised.

These lids are well suited to cafés, coffee shops, staff canteens, hotels, and any takeaway operation already using compatible 8oz cups and looking to move away from plastic lid options. For operations serving different cup sizes, compatible bagasse lids in other sizes are available across the range.

If you are unsure whether these will fit your existing cups, or you are looking to build out a fully compostable disposables offering, we are happy to talk it through before you order.

These are recyclable polystyrene lids designed to fit Fiesta's 80mm 12oz cold paper cups. They provide a secure, close fit that reduces the risk of spills during handling and transit — a straightforward but important consideration for any operation running a takeaway or grab-and-go drinks service.

In a busy service environment, a poorly fitting lid creates problems quickly: wasted product, wet countertops, and dissatisfied customers. These lids seat firmly on the cup rim, which helps staff work at pace without needing to double-check every drink before it leaves the counter. The polystyrene construction keeps them lightweight and easy to handle in volume.

A few practical advantages worth noting:

• Secure rim fit reduces spills during handover and customer carry
• Disposable format removes the need for washing-up between services
• Pack of 1000 reduces reorder frequency for moderate to high-volume sites
• Recyclable material supports waste management policies where recycling facilities are available
• Consistent sizing ensures compatibility across your Fiesta 80mm cup stock

There are no installation requirements here, but it is worth confirming your current cup stock uses the 80mm rim diameter before ordering in bulk. If you are running a high-volume operation and need to review your full disposables setup — cups, lids, and complementary items — we are happy to help you work through what makes sense for your service style and volumes.

These flat lids are designed to fit the Fiesta Green range of compostable cold cups in 12oz, 16oz and 20oz sizes. Made from PLA (polylactic acid), a plant-derived material, they are compostable and intended for operators who want a more environmentally considered alternative to conventional plastic lids for cold drinks service.

In a busy café, juice bar or catering operation, having a lid that fits reliably across three cup sizes reduces the number of separate lid formats you need to stock. The flat profile suits still cold drinks, juices and smoothies where a domed or straw-hole lid is not required. PLA performs well at cold and ambient temperatures but is not suitable for hot drinks.

• Compostable PLA construction — a plant-derived alternative to conventional plastic
• Flat lid profile suited to cold drinks, juices and smoothies
• Compatible with Fiesta Green 12oz, 16oz and 20oz compostable cold cups
• Pack of 1000 lids — practical volume for regular service use
• Reduces the number of lid formats needed across three cup sizes

One practical consideration: PLA is not suitable for hot drinks and will distort at elevated temperatures. These lids should be stored away from heat sources and used only with cold or ambient-temperature beverages. Compostability also depends on access to an industrial composting facility — home composting conditions are generally insufficient for PLA to break down effectively.

These lids are well suited to cafés, juice bars, grab-and-go counters and catering operations that are already using the Fiesta Green compostable cup range and want a matching lid. If you are unsure whether these fit your current cup stock or want to discuss your overall disposables setup, we are happy to help you work it out before you order.

These compostable domed lids are designed for use with Fiesta Green cold cups in 12oz, 16oz, and 20oz sizes. Made from PLA (polylactic acid), a plant-derived material, they are certified compostable and offer a practical alternative to conventional plastic lids for operators looking to reduce their environmental impact without compromising on functionality.

The domed profile provides clearance for layered drinks, blended smoothies, slushies, and ice cream-based beverages — making them a practical choice for cafés, juice bars, event catering, and hospitality venues where cold drinks are a regular part of service. The lids fit securely to reduce spillage during hand-off to customers, which matters during busy service periods when speed and tidiness both count.

• Compostable PLA material — suitable for industrial composting streams
• Domed profile accommodates garnishes, cream, and layered drinks
• Compatible with Fiesta Green 12oz, 16oz, and 20oz cold cups
• Supplied in a pack of 1000, suited to regular or high-volume service
• Lightweight construction with a secure fit to minimise spillage

It is worth noting that PLA compostability relies on access to industrial composting facilities — home composting is generally not sufficient. Operators with a commercial waste stream set up for food-contact compostables will get the most from these lids. They are not suitable for hot beverages.

These lids are well suited to cafés, smoothie bars, leisure venues, and event operators already using the Fiesta Green cup range. If you are building out a compostable serviceware offering or are unsure which cup and lid combination fits your service format, we are happy to help you work through the options.

These Vegware 89-series lids are sip-through hot cup lids designed to fit the full range of Vegware 89-series cups, covering both 12oz and 16oz formats in single wall and double wall variants. Made from CPLA — a plant-based material derived from reclaimed sugarcane fibre — they are suitable for commercial composting, making them a practical choice for operations with an established compostable waste stream.

Each lid carries a moulded 'Caution Hot' message, which is a straightforward compliance and duty-of-care measure for front-of-house hot drinks service. The sip-through aperture functions in the same way as a conventional hot cup lid, so there is no change to the customer experience.

• Commercially compostable — suitable for certified composting facilities
• Fits all Vegware 89-series 12oz and 16oz cups, single and double wall
• Moulded 'Caution Hot' message included as standard
• CPLA construction — plant-based, not petroleum-derived plastic
• Supplied in a case of 1000 for consistent stock management

It is worth confirming before ordering that your waste contractor accepts compostable serviceware, as not all composting facilities handle CPLA. If your site uses a mixed waste stream, a conventional lid may be more appropriate from a disposal standpoint.

These lids suit cafés, contract caterers, and hospitality operations that are actively working toward compostable front-of-house packaging. If you are building out a full Vegware setup or want to check compatibility with your existing cup range, our team is happy to help.

These are the moulded fibre sip-through lids designed to pair with Vegware's 79-Series hot cups. Made from CPLA — a plant-based, commercially compostable material — they are intended for operators who want their entire hot drinks presentation, cup and lid, to sit within a single compostable waste stream.

In a busy counter service or grab-and-go environment, lid consistency matters. These lids fit securely onto Vegware's 79-Series double-wall cups and carry a moulded 'Caution Hot' message, which is a straightforward safety detail that removes the need for separate warning stickers on individual drinks. For sites turning over high volumes of hot drinks during peak service, having a reliable lid that seats properly first time reduces handling time at the counter.

• Commercially compostable where accepted facilities exist
• Sip-through design suitable for takeaway hot drinks service
• Moulded 'Caution Hot' text for customer safety compliance
• Compatible with Vegware 79-Series double-wall cups
• Pack of 1000 suits regular restocking cycles for busy sites

It is worth confirming that your local waste contractor accepts CPLA alongside food-soiled compostables before committing to a compostable serviceware programme. Commercial composting facilities are not universally available, and the environmental benefit depends on correct end-of-life disposal. These lids are not suitable for cups outside the 79-Series range.

Well suited to cafés, coffee shops, contract caterers, and hospitality operations running a compostable packaging policy. If your service volume requires a different pack format or you are building out a broader compostable drinks range, our team are happy to talk through what fits your operation.

These are compostable lids designed to fit the Fiesta Green range of 12oz hot cups. Made from CPLA — a plant-based material derived from renewable sources — they are certified compostable and intended as a straightforward alternative to conventional plastic lids for operators looking to reduce their disposable waste stream.

In a busy café or catering environment, having lids that fit consistently and securely matters more than it might seem. These fit the corresponding Fiesta Green cup range as designed, which keeps service moving without fiddling or mismatched stock. CPLA performs adequately with hot beverages, holding its shape under normal serving conditions rather than softening as some compostable materials can.

• Plant-based CPLA construction — compostable rather than plastic waste
• Designed to fit Fiesta Green 12oz hot cups as a matched pair
• Helps operators demonstrate a practical commitment to reducing single-use plastic
• Suitable for takeaway coffee service in cafés, food markets, and event catering
• Sold in packs of 50 — practical for lower-volume or trial use

It is worth noting that these lids are only compatible with the Fiesta Green 12oz cup range. They are not a universal fit for other cup brands or sizes, so confirming your existing cup stock before ordering is sensible. Packs of 50 suit smaller operations or those supplementing larger stock; higher-volume sites may find larger pack quantities more practical.

These lids are well suited to independent coffee shops, cafés, food market traders, and event caterers who are moving away from conventional plastic lids and want a compostable option that pairs with a matched cup system. They are less suited to very high-volume operations where bulk purchasing from a different pack format would be more efficient.

If you are uncertain which cup and lid combination best fits your operation, we are happy to talk it through.

These compostable lids are designed to pair with the Fiesta Green 8oz hot cups, providing a spill-resistant cover for takeaway hot drinks. Made from CPLA — a plant-based material derived from cornstarch — they are fully compostable, meaning they can be processed through industrial composting facilities rather than going to landfill alongside conventional plastic lids.

In practical terms, the lids perform much as a standard hot cup lid would during service: they seat securely on the cup, help retain heat, and reduce spill risk for customers on the move. For operators running a takeaway coffee counter, café, or food stall, having lids that match the cup specification is straightforward to manage — the CPLA construction behaves similarly to conventional plastic during normal service use.

The main operational advantages of switching to compostable lids are:

• Reduces single-use plastic in your disposables line-up
• Supports compliance with growing operator and venue sustainability requirements
• Appeals to environmentally conscious customers without changing your service workflow
• Compostable certification supports green credentials for events, festivals, and catering tenders

It is worth noting that CPLA lids require industrial composting to break down correctly — home composting is not sufficient, and they should not go into standard recycling streams. Operators should ensure they have appropriate waste disposal arrangements in place to realise the environmental benefit.

Sold in packs of 50, these lids are well suited to lower-volume sites or operators trialling compostable packaging before committing to larger quantities. Higher-volume operations may find larger pack sizes more practical from a cost and stock management perspective.

If you are reviewing your full disposables setup or need guidance on matching cups and lids across different sizes, the team is happy to help you work through the options.

These are CPLA lid covers designed to fit the Fiesta Green 12oz hot cups. CPLA — a heat-resistant, plant-based material derived from polylactic acid — makes these lids suitable for use with hot beverages where standard PLA would deform. They function as a secure lid for takeaway coffee, tea, and similar drinks, helping to reduce spill risk during handling.

In busy café or food-to-go settings, the priority is speed and consistency. These lids fit onto the matching Fiesta Green cups without the kind of fitting variation that slows service down. The CPLA construction handles normal hot-drink temperatures without warping, which matters when staff are working quickly across a full morning rush.

The practical case for using compostable lids is straightforward for operators already committed to a compostable cup-and-lid programme:

• Plant-based CPLA material — certified compostable under industrial composting conditions
• Supplied in a bulk pack of 1000, reducing reorder frequency in high-turnover operations
• Designed to pair with the Fiesta Green 12oz hot cup range for a consistent waste stream
• Supports operators working towards a fully compostable single-use programme

It is worth noting that these lids require industrial composting facilities to break down correctly — they will not compost in a standard home compost bin. Operators should confirm their waste contractor can handle CPLA before committing to this product as part of a sustainability policy.

These lids suit cafés, coffee shops, food markets, event catering, and any high-volume takeaway operation already using compatible Fiesta Green cups. They are not intended for use with other cup brands or sizes, and pairing them with non-matching cups risks poor fit and spill risk.

If you are building or reviewing a compostable packaging programme and want to confirm compatibility with your current cup stock, our team is happy to help you work through the options.

These are compostable lids designed to fit the Fiesta Green range of 8oz hot cups. Made from CPLA — a plant-based material derived from cornstarch — they are fully compostable through an appropriate industrial composting facility, making them a practical alternative to conventional plastic lids for operators looking to reduce single-use plastic waste across their drinks service.

In a busy café, coffee shop, or food stall environment, lids like these handle a straightforward job: keeping hot drinks contained during handover and transit, reducing spills, and maintaining temperature for the customer. The CPLA material performs adequately under normal hot drink service conditions, though operators should be aware that CPLA lids are not equivalent to conventional plastic in terms of heat resistance at extremes — they are suited to standard hot beverage service rather than prolonged exposure to very high temperatures.

Buying in bulk at 1,000 units keeps unit cost manageable and reduces how frequently stock needs reordering, which is a practical consideration for high-footfall sites. Key operational points worth noting:

• Fully compostable through certified industrial composting — not suitable for home composting bins
• Made from CPLA, a plant-based alternative to conventional plastic lids
• Designed to fit the Fiesta Green 8oz hot cup range specifically
• Sold in a case of 1,000, suited to consistent daily volume
• Supports operators working towards reducing single-use plastic waste

These lids are a sensible choice for coffee shops, cafés, market traders, festival caterers, and contract catering operations that are already using or switching to the Fiesta Green cup range. If your site runs significantly higher volumes or you use a different cup size, it is worth checking compatibility before ordering in quantity.

If you are unsure which cup and lid combination is right for your service setup, our team is happy to point you in the right direction before you commit to a bulk order.

These plastic lids are made by Huhtamaki specifically to fit their 455ml Enjoy range of paper cold cups. Each lid clips securely onto the cup rim, includes a straw slot to hold a straw in place during service, and helps prevent spills and contamination between preparation and handover.

For front-of-house teams handling high volumes of cold drinks — iced coffees, soft drinks, smoothies, or blended beverages — a reliable lid fit matters more than it might seem. A lid that sits loosely or pops under light pressure creates spills, waste, and customer complaints. Because these lids are matched to Huhtamaki's own cup tooling, the fit is consistent across the pack, which is useful when staff are working quickly under service pressure.

• Designed to fit Huhtamaki 455ml Enjoy paper cold cups precisely
• Straw slot holds a straw securely without excess movement
• Helps prevent spills during handover and carry
• Protects cup contents from airborne contamination
• Supplied in a pack of 2000, practical for ongoing service use

These lids are suited to cafés, quick-service restaurants, juice bars, and any operation serving a consistent volume of cold drinks in Huhtamaki Enjoy cups. They are not a universal fit — if your operation uses a different cup brand or size, it is worth confirming compatibility before committing to a large pack quantity.

If you are unsure whether these lids are right for your cup stock, or if you are looking to standardise your disposables across a site, the team is happy to help you work through the options.

These flat lids are part of Vegware's 96 Series range and are designed for use with cold cups in 12oz and 16oz capacities. Made from PLA — a plant-based plastic alternative — they are intended for commercially compostable waste streams, making them a practical choice for operators looking to reduce landfill waste from single-use serviceware.

In day-to-day service, the lids perform consistently across cold drinks including soft drinks, juices, iced beverages and blended drinks. The clear PLA material maintains good visibility of the drink beneath, which suits counter and kiosk service where presentation matters. The no-hole format is appropriate where straws are not required or are provided separately.

• Commercially compostable within 12 weeks under the right conditions
• Plant-based PLA material as an alternative to conventional plastic
• Clear finish keeps drinks visible at point of sale
• Flat profile suits counter displays and standard lid dispensers
• Compatible across the Vegware 96 Series cold cup range

It is worth noting that commercial composting requires access to an industrial composting facility. If your operation does not currently have a composting waste collection in place, the environmental benefit depends on arranging that infrastructure separately. These lids are not suitable for hot drinks.

This pack is well suited to cafés, juice bars, food-to-go counters, contract caterers, and event operators running cold drinks as part of a wider compostable serviceware programme. For sites with very high throughput, it is worth considering whether the pack quantity aligns with your stock rotation and storage capacity.

If you are building out a compostable drinks service and want to make sure the cups, lids and any other disposables work together correctly, we are happy to talk it through.

These are compostable paper lids designed to fit Vegware's 79-Series range of hot cups. Made from sustainably sourced paper with a bio-based, moisture-resistant lining, they are a straightforward replacement for conventional plastic lids in a takeaway or counter hot drinks service.

In a busy café, canteen, or front-of-house setting, disposable lids go through stock quickly. A pack of 1000 gives reasonable run-time for most operations without constant reordering, and the pull-back tab design means customers can drink without removing the lid — a practical detail that reduces spills during service.

From an operational standpoint, switching to compostable packaging is increasingly expected by customers and, in some local authority areas, required under sustainability policies. Key practical points worth noting:

• Compostable to industrial standards — requires commercial composting facilities, not general waste or home composting
• Moisture-resistant lining maintains integrity under normal hot drinks use
• Pull-back tab reduces lid removal and the associated mess at service points
• Sold in cases of 1000, keeping storage straightforward for most operations

These lids are specifically sized for the 79-Series cup range. If you are running a different cup size or sourcing cups from another manufacturer, confirm the series sizing matches before ordering — lid and cup compatibility is the most common source of frustration with disposables procurement.

Well suited to cafés, workplace canteens, catering companies, and any operation running a takeaway or deskside hot drinks service where compostable packaging is part of the brief. If you are putting together a full compostable cup setup and want to confirm compatibility across your current cup stock, feel free to get in touch before placing a larger order.

These are paper lids designed to fit Vegware's 89-Series range of compostable hot cups. Made from sustainably sourced paper with a bio-based, moisture-resistant lining, they are intended as a fully compostable alternative to conventional plastic lids — suitable for operations that have made a commitment to reducing single-use plastic waste across their drinks service.

The lids feature a pull-back tab, which makes them practical for takeaway and on-the-go service without requiring a separate sip hole or additional lid type. They perform well in café, hospitality, and catering environments where speed of service matters and staff need a lid that fits securely first time.

• Compostable construction reduces single-use plastic in your drinks service
• Pull-back tab suitable for takeaway and on-the-go drinks service
• Moisture-resistant lining maintains integrity with hot beverages
• Compatible with the full Vegware 89-Series hot cup range
• Pack of 1000 suits moderate to high-volume service without frequent reordering

Before ordering, it is worth confirming that your current hot cups are within Vegware's 89-Series sizing. These lids are designed specifically for that series and will not reliably fit cups from other size ranges or non-Vegware brands. If you are building out a fully compostable drinks service from scratch, it is worth ensuring your cups, lids, and any other packaging elements are all specced from a compatible range.

These lids are well suited to cafés, coffee shops, staff canteens, contract caterers, and any operation running a takeaway drinks offer where compostable packaging is a requirement — whether driven by policy, venue rules, or customer expectation. If you are unsure which cup sizes or quantities are right for your service volumes, we are happy to help you work that out.