Fiesta Disposable and Reusable Cups and Straws

These pink paper straws from Fiesta are a straightforward compostable alternative to single-use plastic straws, suitable for bars, cafés, restaurants, and any hospitality operation that serves cold drinks. Each straw is made from FSC 100% certified paper and carries commercial compostable accreditation, making them a practical choice for operators working toward reducing single-use plastics in line with current UK hospitality expectations.

In day-to-day service they perform well across a broad range of cold drinks — soft drinks, cocktails, milkshakes, and iced beverages. Paper straws of this type are generally best suited to drinks consumed promptly rather than those left standing for extended periods, which is worth bearing in mind if your service style involves long table dwell times or thick-consistency drinks.

• Commercially compostable — supports sustainable waste disposal
• FSC 100% certified paper construction
• Pink colouring suited to branded or themed drink menus
• 250 straws per pack — practical for moderate to high service volumes
• No plastic content — compliant with single-use plastic reduction goals

Packs of 250 make stock management straightforward for most operations, and the product is typically stocked for reliable availability. Operators running high-volume bar or events service may want to consider buying in greater quantities to avoid mid-service shortfalls.

If you're unsure how these fit alongside your other disposables or whether a different size or style would suit your service better, the team is happy to help you work through the options.

These are single wall cardboard takeaway cups from Fiesta, supplied in packs of 50 in a red finish. At 340ml (12oz), they sit at the standard size for a medium hot drink — well suited to flat whites, lattes, Americanos, and similar café staples. The recyclable construction makes them a practical choice for operators looking to reduce non-recyclable waste without moving to reusable cups.

Single wall cups are a straightforward, cost-effective option for lower-volume takeaway service or as a secondary cup stock. It is worth noting that single wall construction offers less insulation than double wall alternatives, so customers may find the cup warm to hold with very hot drinks. For outlets serving high volumes of hot drinks at extended temperatures, a double wall or corrugated sleeve solution may be worth considering.

Practically, these cups work well in a range of settings:

• Grab-and-go counters in cafés, bakeries, and delis
• Event catering and hospitality where disposables are preferred
• Staff canteens or breakout areas with self-serve hot drink stations
• Lower-volume takeaway coffee service as a cost-efficient stock option

Compatible sipper dome lids are available separately, which help retain heat and reduce spillage risk during transit — a straightforward addition for any takeaway operation. The recyclable material aligns with increasingly common waste management requirements in food service environments.

If you are unsure whether single wall cups are the right fit for your service volume or drink temperature requirements, the team is happy to help you think through the options.

These are single wall cardboard takeaway cups designed for serving hot drinks in a café, deli, canteen, or grab-and-go operation. Each cup holds 225ml (8oz), making them a standard fit for a single or double espresso-based drink — the size most commonly associated with a flat white or medium Americano. They are supplied in a pack of 1000 and carry a recyclable construction, which is increasingly relevant for operators looking to reduce single-use waste or meet customer expectations around sustainability.

Single wall cups are straightforward and cost-effective. They work well where drinks are handed over quickly and consumed soon after service — coffee kiosks, canteen counters, bakeries, and event catering being typical settings. The red design gives them a clean, consistent appearance on the counter. For services where customers carry drinks for longer periods or where heat retention is more important, a double wall or sleeved alternative would be worth considering instead.

• Recyclable construction suited to operators reducing single-use waste
• 225ml capacity aligns with standard espresso-based drink sizes
• Consistent printed design presents well on a takeaway counter
• Bulk pack of 1000 reduces restocking frequency during busy periods
• Compatible with standard sipper dome lids, sold separately

It is worth confirming lid compatibility before ordering if you are not already using a matching lid. Lids are sold separately and should be checked against this cup diameter to avoid mismatches on the counter.

If you are unsure about volumes, cup sizing, or matching accessories for your setup, the team is happy to help you work through the options.

These Fiesta single wall takeaway cups are a practical disposable option for operators serving hot drinks to go. Made from cardboard, each cup holds 340ml (12oz), making them well suited to standard flat whites, lattes, and Americanos served in takeaway format. The turquoise design gives a clean, recognisable look on the counter without requiring branded packaging.

In a busy café or takeaway environment, having a reliable stock of correctly sized cups reduces service delays and keeps the counter running smoothly. Single wall construction is appropriate for moderate drink temperatures when cups are handled briefly, as is typical at a takeaway point. Operators serving very hot drinks or expecting customers to hold cups for extended periods may wish to consider double wall alternatives, which offer greater insulation and are more comfortable to hold without a sleeve.

• Recyclable cardboard construction supports waste reduction commitments
• 340ml capacity suits most standard espresso-based drinks
• Consistent sizing works reliably with compatible sipper dome lids (sold separately)
• Pack of 50 suits low-to-medium volume service or trial use
• Turquoise print gives a tidy, professional appearance at the point of service

These cups are best suited to cafés, delis, event catering, and hospitality operations with moderate takeaway volumes. For higher-volume sites running continuous takeaway service, it is worth considering larger pack formats to reduce re-ordering frequency and unit cost.

If you are unsure which cup specification or pack size suits your service volume, the team is happy to help you work it out.

These are individually wrapped, compostable paper straws from Fiesta, designed for use with smoothies, milkshakes, and other thick cold drinks. The wide bore allows thick beverages to flow freely, and the three-ply paper construction holds its shape reasonably well during normal drink service — softening more slowly than single-ply alternatives.

In a busy café, bar, or quick-service environment, straw presentation and hygiene handling matter. Individual wrapping means each straw is protected until the moment it is used, which is a straightforward way to demonstrate hygiene standards to customers without any additional effort from front-of-house staff. The red stripe design also gives a clean, consistent look across drinks presentations.

From a sustainability standpoint, these straws are made from FSC-certified materials using food-safe, gluten-free inks and water-based adhesive, and they are certified commercially compostable. For operators who are working to reduce single-use plastics or align with a broader sustainability policy, that certification provides a verifiable position rather than a general claim.

• Wide bore suited to smoothies and milkshakes
• Individually wrapped for consistent hygiene at the point of service
• Three-ply paper construction resists softening during normal use
• Commercially compostable with certified sustainable materials
• Consistent striped presentation across all drinks

These are practical for most café, juice bar, or hospitality settings. For very high-volume venues going through significant quantities daily, it is worth considering pack-size options to manage storage and cost per unit. If you are unsure which straw format best fits your service style or waste disposal setup, the team are happy to talk it through.

These are single wall cardboard takeaway cups in a 455ml (16oz) format, supplied in cases of 1,000. Constructed from kraft cardboard and positioned as a recyclable option, they are designed for operators who want a straightforward, presentable takeaway cup without unnecessary complexity. The kraft finish gives a neutral, widely accepted aesthetic that works across café, bakery, and catering environments.

In practical terms, single wall construction means the cup offers no additional insulation beyond the cardboard itself. For short hand-to-customer distances — counter service, market stalls, or events — this is rarely a problem. Where customers are carrying drinks for longer periods, or where hand comfort is a priority, a double wall or sleeved alternative may be worth considering. That said, for most standard café and coffee-shop service flows, these perform reliably at volume.

Key practical points for operators:

• Recyclable cardboard construction supports waste compliance in many local authority schemes
• 455ml capacity suits standard large or 16oz coffee and hot drink formats
• Pack of 1,000 reduces order frequency for busy sites
• Kraft finish is compatible with a wide range of lid types — confirm lid sizing before ordering
• Single wall design keeps unit cost low, useful where margin is tight

These cups are best suited to cafés, coffee kiosks, event caterers, and hospitality operators running consistent hot drink volumes who need a cost-effective, recyclable option. Sites with very high throughput may find it worthwhile to look at higher-specification cup formats with improved heat retention.

If you are unsure whether single wall cups are the right choice for your service style, or want to discuss lid compatibility and pack volumes, our team is happy to help you work through the options.

These Fiesta double wall kraft cups are a straightforward disposable option for serving hot drinks in cafés, canteens, hospitality operations, and anywhere a paper cup is needed. The double wall construction traps a layer of air between the two layers of cardboard, which provides enough insulation to keep drinks at serving temperature without the need for a separate cardboard sleeve. The kraft finish gives a clean, natural appearance that suits most counter and self-service settings.

In practical terms, double wall cups are a reliable everyday choice where staff or customers are carrying hot drinks without lids or with loose-fitting lids. The insulation reduces the risk of customers finding a cup uncomfortably hot to hold, which matters in high-footfall or self-service environments. Being recyclable, they are also a reasonable choice for operators managing waste streams or working towards reducing single-use plastic.

• Double wall construction reduces heat transfer to the outer surface
• Recyclable cardboard construction suits operators with waste reduction commitments
• Kraft finish suits café, canteen, and hospitality counter presentations
• No sleeve required, keeping serving stations tidier and restocking simpler

These cups are sold in packs of 25, which makes them more suited to lower-volume or back-up stock situations than to high-turnover espresso bars or busy quick-service counters, where larger pack sizes would be the more practical purchase. If your operation goes through significant cup volume during a service, it is worth considering whether a larger pack size would better suit your storage and ordering pattern.

If you are unsure which cup size or pack quantity is right for your operation, the team is happy to help you work it out.

These flat lids are designed to fit the Fiesta Recyclable rPET cup range in 12oz, 16oz, and 20oz sizes. Made from recycled PET — a widely recyclable material — they include a straw hole, making them a practical choice for cold soft drinks, iced coffees, and similar served beverages in takeaway or counter-service settings.

For day-to-day service, the consistent fit across three cup sizes simplifies stock management and reduces the risk of mismatched lids at the point of service. rPET is produced using recycled plastic rather than virgin material, which helps operators reduce their reliance on new plastics as part of a broader sustainability approach. As with all recyclable packaging, it is worth checking local collection and recycling guidelines, as accepted materials can vary by area.

• Fits three cup sizes, reducing the number of lid SKUs to manage
• Straw hole suitable for cold drinks and iced beverages
• Made from recycled PET, supporting reduced virgin plastic use
• Widely recyclable material where local facilities accept it
• Pack of 400 suited to regular volume takeaway or café service

These lids are well suited to cafés, coffee shops, quick-service restaurants, and any operation running a cold drinks programme with takeaway output. For sites with very high daily cup volumes, it is worth considering whether bulk case quantities would be more practical from a storage and ordering perspective.

If you are building out a full disposables range or want to confirm compatibility with your current cup stock, the team is happy to help.

These Fiesta double wall kraft cups are a straightforward, practical solution for serving hot drinks in catering environments where disposable cups are preferred. The double wall construction traps a layer of air between the two layers of cardboard, which provides meaningful insulation without the need for a separate corrugated sleeve. The kraft finish gives a clean, neutral appearance that suits most café and hospitality settings.

In busy service periods, the insulation does two things: it keeps the drink at the right temperature for longer, and it keeps the outside of the cup comfortable to hold, which reduces handling complaints and speeds up the hand-off at the counter. For operations running a high volume of takeaway or table service, that matters.

• Double wall construction insulates without a separate cup sleeve
• Recyclable cardboard construction supports waste reduction commitments
• Kraft finish presents well across café, catering, and hospitality settings
• Pack of 500 suits bulk purchasing for consistent stock management
• Suitable for standard hot beverages including filter coffee, americano, and tea

These cups are manufactured from cardboard and are marketed as recyclable, which is worth confirming against your local recycling provision, as cup recycling infrastructure varies by area. They are not designed for cold drinks or extended hold times.

This size is well suited to standard single or double espresso-based drinks. For operations primarily serving larger format drinks — flat whites in a larger size or 12oz americanos — it is worth considering whether a larger cup size would reduce waste and better match your menu portions.

If you are unsure which cup size or pack format best matches your service volume, the team is happy to help you work through the options.

These black paper straws from Fiesta are a practical, compostable alternative to single-use plastic straws, suited to bars, cafés, restaurants and any food service operation looking to reduce plastic waste across their front-of-house offer. Made from sustainably sourced materials and certified to FSC 100% standard, they meet EN13432 compostability certification, meaning they can be processed through industrial composting streams rather than going to landfill.

The three-ply construction gives them a reasonable working life in cold drinks without the premature softening that thinner paper straws are known for. They won't hold up indefinitely in long, slow drinks service — no paper straw will — but for standard cold beverage service they perform well enough for most operators. The black finish is a practical choice for venues where presentation matters, as it tends to look cleaner against a range of glassware and cup styles than white alternatives.

Supplied in a pack of 250, they're well suited to busy service periods where front-of-house staff need ready access to stock without constant restocking interruptions. The pack size suits most café and bar environments comfortably.

• Compostable disposal reduces single-use plastic waste in service operations
• Three-ply construction improves durability compared to single-ply alternatives
• FSC and EN13432 certification supports sustainability reporting and compliance
• Black finish suits a wide range of glassware and branded presentation styles

If you're unsure about quantities, pack formats, or which straw specification suits your drinks menu, we're happy to help you work through the options.

These are single-wall paper hot cups in a 6oz format, supplied in cases of 1000. Made from paper with a PE lining, they are designed for hot drink service and are compatible with Fiesta 6/8oz lids. The black finish gives them a clean, consistent look that suits most café and coffee counter presentations without requiring branded packaging.

The 6oz size is a practical choice for flat whites, cortados, and smaller espresso-based drinks. The rolled rim adds enough structural rigidity to prevent the cup flexing under grip, which helps reduce the likelihood of spills during a busy service period. Single-wall construction means they are a cost-effective option for operations where customers are typically seated or have access to a sleeve or holder — for prolonged hand-held use in high-temperature drinks, a double-wall cup may be worth considering.

From an operational standpoint, a few points are worth noting:

• Compatible with Fiesta 6/8oz lids — keeps your lid stock consolidated
• Rolled rim improves grip and reduces flex during service
• Black finish suits most café counter aesthetics without additional branding
• Paper construction with PE lining — recyclable through specialist streams only
• 1000-unit case quantity suits regular-volume café and hospitality operations

On recyclability: these cups carry a PE lining and are not accepted in standard kerbside recycling. Operators with sustainability commitments should verify local specialist recycling availability before committing to these in volume. Fully compostable or certified recyclable alternatives exist if that is a priority for your operation.

These cups are well suited to cafés, coffee counters, and hospitality operations running consistent flat white or speciality coffee volumes. If your service leans toward larger drink formats or you need a cup that performs well without a sleeve, it is worth discussing the wider range before placing a bulk order — the team is happy to help you match cup specification to your actual service requirements.

These 8oz double-wall hot cups from Fiesta are a seasonal disposable option for cafés, coffee shops, and hospitality venues running takeaway drinks service over the Christmas period. The double-wall construction provides a degree of insulation that helps retain drink temperature without the need for a separate sleeve, which can simplify service at busy counters.

The rolled rim adds a modest amount of structural rigidity, reducing the likelihood of the cup flexing or collapsing when held — useful during high-volume service when staff and customers are handling cups quickly. The festive print gives a seasonal feel that suits December trading without requiring any additional branding effort.

• Double-wall design reduces heat transfer to the hand
• Rolled rim improves cup stability when held
• Seasonal print ready for December service with no extra outlay
• Recyclable through specialist streams — worth confirming local availability before committing to volume
• 500-unit pack suits moderate to high-volume seasonal periods

It is worth noting that recyclability depends on access to appropriate specialist recycling facilities, which vary by area. If environmental credentials are important to your operation or your customers, it is advisable to confirm what recycling options are available locally before purchasing in bulk. A larger 12oz size is available within the same range if your menu includes larger drink formats.

These cups are well suited to coffee shops, hotel breakfast counters, event catering, and any takeaway operation looking for a seasonal touch during the festive period. If you are unsure which size or volume best fits your service pattern, the team is happy to help you work it out.

These Fiesta rPET cups are single-use cold drink cups manufactured from recycled PET plastic. The 455ml/16oz capacity makes them a practical choice for a wide range of cold beverages including soft drinks, iced coffee, smoothies, bubble tea, and slushies. The material provides reasonable rigidity and clarity, so drinks present well and the cup holds its shape under normal service conditions.

For busy operations running events, outdoor catering, or high-footfall service points, disposable cups at this volume need to hold up reliably through handling, stacking, and rapid service. rPET performs comparably to virgin PET in terms of strength and presentation, without the need to introduce new plastic into your supply chain. The pack quantity of 400 suits operations that go through volume quickly and want to minimise restocking frequency.

From an operational standpoint, these cups offer a few practical advantages worth noting:

• Made from recycled PET, reducing reliance on virgin plastic materials
• Widely recyclable — rPET is accepted by many local recycling services
• Compatible with flat, domed, and strawless lid options for flexible service formats
• Rigid enough to stack and handle efficiently during fast service periods
• Clear construction allows customers to see the drink, which suits iced and layered beverages

There are no specialist installation requirements — these are a straightforward consumable. Storage space is the main practical consideration; a pack of 400 cups of this size has a meaningful footprint in a stock room or back-of-house area, so factor that into your ordering cycle. rPET is not suitable for hot drinks, and these cups should not be used with boiling or near-boiling liquids.

Well suited to cafés, event caterers, festival bars, sports venues, and any operation serving cold drinks in volume. If your throughput is lower and a smaller pack quantity would reduce waste and storage pressure, a smaller pack size may be worth considering instead.

If you're unsure which cup and lid combination works best for your service format, the team is happy to talk it through.

These Fiesta ripple wall cups are a straightforward disposable option for operations serving takeaway hot drinks. The corrugated cardboard construction creates an air gap between the drink and the outer surface, which slows heat transfer in both directions — keeping the drink warmer for longer while the outer wall remains comfortable to hold without a separate sleeve.

In a busy café or takeaway environment, that matters practically. Customers aren't reaching for a lid or setting the cup down because it's too hot to hold, and staff aren't fielding complaints about drinks going cold before the customer reaches their seat. The 225ml capacity is a standard 8oz size, suited to flat whites, americanos, espresso-based drinks, and most filter coffee serves.

• Ripple wall construction removes the need for a separate cup sleeve
• Corrugated cardboard material is recyclable, supporting responsible disposal
• Charcoal finish presents a clean, neutral appearance on the counter
• Standard 8oz size compatible with most coffee shop portion sizes
• Supplied in packs of 25, suitable for smaller operations or topping up stock

The pack size of 25 is worth considering against your service volume. For a high-turnover site running significant daily covers, sourcing in larger case quantities is likely more practical from both a cost and logistics standpoint. These smaller packs suit lower-volume operations, pop-up catering, or situations where storage space for bulk stock is limited.

If you're unsure whether this cup size and format is the right match for your service or whether a different volume pack would work better for your operation, our team are happy to help you work it out.

These Fiesta rPET lids are designed to sit on 12oz, 16oz, and 20oz cups from the Fiesta rPET Cup range, allowing customers to drink directly from the lid without the need for a straw. They are a straightforward, functional solution for cold soft drink service across cafés, food-to-go outlets, and event catering operations.

In a busy service environment, removing the straw from the equation simplifies the counter setup, reduces the number of consumables to manage, and speeds up the handover of drinks to customers. The lids fit securely and are supplied in packs of 400, making them practical for sites with consistent throughput.

• Made from recycled PET (rPET), reducing reliance on virgin plastic
• Widely recyclable material — check local authority guidelines for disposal routes
• Straw-free design supports compliance with single-use plastics reduction commitments
• Compatible across three cup sizes, simplifying stock management
• Pack of 400 suits regular, ongoing service requirements

As with all recyclable disposables, the actual recyclability depends on local collection infrastructure. It is worth confirming with your waste contractor or local authority that rPET lids can be processed through your available channels before committing to a large stock order.

These lids are well suited to cafés, coffee shops, quick-service restaurants, and catering contractors serving cold drinks in disposable cups. They are most useful for operators who have already moved to the Fiesta rPET cup range and want a consistent, compatible lid solution.

If you are unsure which lid or cup combination best suits your service format, the team is happy to help you work through the options.

These Fiesta single wall takeaway cups are a practical disposable option for coffee service across cafés, canteens, hospitality venues, and grab-and-go outlets. Constructed from cardboard in a turquoise design, they are sized for a standard 12oz serve — the most common format for flat whites, lattes, and Americanos in UK food-to-go settings.

Single wall construction keeps costs low per cup, which suits venues where volume is high and margin per drink needs to be managed carefully. They are a sound choice for counter service where drinks are handed over quickly and customers are moving on, rather than sitting in. For longer dwell times or hot drinks served to seated customers, a double wall cup reduces the need for a sleeve and may be worth considering.

Key practical points for operators:

• Recyclable board construction supports waste compliance requirements
• Turquoise design offers a clean, contemporary look at the counter
• Compatible with sipper dome lids, sold separately, to reduce spillage risk during transit
• Supplied in a pack of 1,000, suitable for busy daily service
• Consistent sizing supports reliable lid fitment across your stock

These cups suit cafés, coffee kiosks, staff canteens, event catering, and any operation running a high volume of hot drink orders. If your service runs to considerably higher volumes or you require a double wall option for better heat retention in hand, alternatives are available within the range.

If you are unsure whether single wall suits your setup, or need guidance on lid compatibility, the team is happy to help you work through the options.

These are single wall cardboard coffee cups from Fiesta, supplied in a pack of 1000. The 340ml capacity makes them a practical choice for standard espresso-based drinks — flat whites, lattes, and Americanos at a typical café serve size. The charcoal design is neutral enough to work across a range of hospitality settings without looking out of place.

Single wall construction is a straightforward, cost-effective format. It works well in environments where drinks are handed over quickly or where customers are seated and consuming promptly. It is worth noting that single wall cups offer less thermal insulation than double wall alternatives, so for services where cups are carried for longer periods or where hand comfort matters, a double wall or sleeved option may be worth considering.

Practical day-to-day advantages include:

• Recyclable construction, supporting waste reduction commitments
• Neutral charcoal design suits a range of hospitality environments
• High pack quantity reduces reorder frequency for busy sites
• Compatible with standard sipper dome lids (sold separately)
• Consistent cup sizing supports reliable lid fitment across service

These cups are well suited to canteens, café bars, event catering, and hospitality operations running a straightforward hot drinks offering. For very high-volume sites or services where cups travel further, it is worth comparing single and double wall options to find the right balance of cost and performance.

If you are sizing up cup stock for a new operation or reviewing your current disposables setup, our team is happy to talk through the options.

These Fiesta 340ml rPET cups are single-use cold drink cups made from recycled PET plastic. Designed for cold beverage service, they hold a standard 12oz volume and are compatible with a range of lids — including flat, domed, and strawless options — making them straightforward to integrate into an existing disposable cup setup.

In a busy service environment, consistency and reliability matter. These cups offer good rigidity for a lightweight disposable, which helps reduce spills and makes them easier to handle quickly during high-volume service. They perform reliably across a range of cold applications: soft drinks, iced coffee, smoothies, slushies, bubble tea, and cold dessert formats such as ice cream sundaes. They are not suitable for hot beverages.

From an operational standpoint, the rPET construction offers a few practical advantages:

• Made from recycled PET, reducing reliance on virgin plastic materials
• Widely recyclable — check with your local waste contractor for disposal guidance
• Compatible with multiple lid formats for different service styles
• Supplied in a pack of 400, reducing reorder frequency for busy sites
• Consistent sizing supports reliable lid fitment across your stock

No installation requirements apply. Storage space for bulk packs should be considered, particularly for sites ordering in quantity. As with all rPET products, these cups should be stored away from heat sources to avoid any risk of distortion prior to use.

These cups are well suited to cafés, casual dining, food-to-go operations, event catering, and any venue serving cold drinks in disposable formats. For very high-volume operations or sites requiring a larger capacity cup, it is worth reviewing whether a different size in the same range would better match your service needs.

If you are unsure which cup and lid combination is right for your setup, we are happy to help you work through the options.

These Fiesta single wall black cardboard coffee cups are a practical, no-fuss choice for takeaway hot drink service. Each cup holds 455ml, making them suitable for a standard large or 16oz serving — a commonly used size across café, coffee shop, and catering-to-go operations. The pack contains 1000 cups, giving a useful bulk quantity for busy sites looking to keep stock topped up without constant reordering.

Single wall construction keeps things simple and cost-effective for operations where customers are moving quickly and dwelling time is short. For environments where customers are holding drinks for longer periods, a double wall alternative may be worth considering to reduce heat transfer to the hand — worth bearing in mind when choosing the right cup format for your service style.

From an operational standpoint, these cups offer a few practical advantages:

• Recyclable cardboard construction supports waste reduction commitments
• Black finish gives a clean, consistent presentation across your drinks range
• 1000-unit pack reduces reorder frequency for high-volume sites
• Standard 16oz sizing is compatible with most commercial coffee machine portafilters and automated dispensing equipment
• Lightweight and stackable for straightforward storage in back-of-house areas

These cups are well suited to cafés, coffee shops, street food operations, staff canteens, and event catering where takeaway hot drinks form a regular part of service. Higher-volume sites running multiple service points may want to look at larger pack formats to reduce per-unit cost further.

If you are unsure about the right cup specification — wall type, sizing, or compatibility with lids you already use — the team is happy to help you work through the options before you commit to a bulk order.

These Fiesta paper straws are a practical replacement for single-use plastic straws, designed for food service environments where hygiene and sustainability both matter. Each straw is individually wrapped, which prevents handling contamination before it reaches the customer — a straightforward hygiene advantage for busy bars, cafés, and restaurants.

The straws are made using food-safe, gluten-free inks and water-based adhesive, making them suitable for use with a wide range of beverages. They carry EN13432 certification and are compostable within 12 weeks at an industrial composting facility, which supports operators working towards reduced landfill waste and more responsible disposables procurement.

From a practical standpoint, paper straws of this type perform well for most cold drinks service. They are worth noting for high-sugar or thick blended drinks, where extended contact with liquid can soften any paper straw over time — this is a general characteristic of the category rather than a specific limitation of this product.

• Individually wrapped for hygiene at point of service
• Compostable, supporting responsible waste disposal
• Food-safe inks and water-based glue throughout
• Suitable for bars, cafés, restaurants, and event catering
• Pack of 250 provides a practical stock quantity for regular service

If you're reviewing your full disposables range or have questions about quantities for your volume of covers, the team are happy to help you work out what makes sense.

These Fiesta ripple wall coffee cups are a practical, recyclable option for operators running takeaway or grab-and-go hot drink services. Each cup holds 225ml (8oz), making them a standard fit for espresso-based drinks including flat whites, lattes, and Americanos served in smaller formats. The turquoise printed outer gives a consistent, presentable finish without the need for a separate sleeve or additional branding.

The ripple wall construction provides enough insulation to keep the outer surface comfortable to hold without a separate cup sleeve, which reduces consumable costs and speeds up service when staff are handling high volumes. The rolled rim adds structural stability, helping to prevent the cup from flexing or collapsing under a lid — a practical detail during a busy morning rush when drinks are being passed across a counter quickly.

• Ripple wall eliminates the need for a separate cup sleeve
• Rolled rim adds grip and structural stability under a lid
• Recyclable construction supports responsible disposable use
• Consistent turquoise print gives a professional front-of-house finish
• 225ml capacity suits standard small espresso-based drink formats

These cups are sold in cases of 500, which suits moderate to high-volume sites. For very high-footfall operations running multiple service points, it is worth considering whether a larger case quantity or a bulk purchase arrangement would better suit your stock management. If you are unsure which cup size or style fits your current menu, the team is happy to help you work through the options.

These domed lids from Fiesta's Recyclable rPET range are designed to fit the 12oz, 16oz, and 20oz cups in the same series. Made from recycled PET — a widely recyclable material — they offer a practical alternative to virgin plastic lids for operations looking to reduce their use of new plastics without compromising on functionality.

Each lid features a straw hole, making them suited to cold drinks service: soft drinks, iced coffees, smoothies, slushies, and similar beverages. The domed profile provides clearance for whipped or blended drinks where a flat lid wouldn't sit comfortably over the contents. They seat securely on compatible cups, which matters during a busy service when staff are moving quickly.

Practical considerations for operators:

• Compatible with Fiesta Recyclable rPET cups in 12oz, 16oz, and 20oz sizes — verify cup compatibility before ordering
• Made from rPET, reducing reliance on virgin plastics in your disposables spend
• Straw hole included as standard — suited to straws or spout lids where applicable
• Sold in packs of 400, appropriate for moderate to high-volume takeaway or café environments
• Check with your local authority or waste contractor for recycling guidance, as kerbside rPET acceptance varies by area

These lids are well suited to cafés, coffee shops, juice bars, and takeaway operations running cold drinks as part of their regular menu. For very high-volume sites handling hundreds of drinks per service, it is worth considering whether a larger pack size or case quantity would better suit your ordering cadence.

If you're unsure whether these lids are compatible with cups you're already using, or need guidance on building out a consistent recyclable disposables range, the team is happy to help.

These Fiesta Recyclable festive double wall hot cups are a practical choice for cafés, canteens, and takeaway operations running a seasonal drinks service. The double wall construction provides passive insulation that helps retain heat without requiring a separate sleeve, which keeps serving straightforward during busy periods. The rolled rim adds structural rigidity, reducing flex in the hand and helping to minimise spills when customers are on the move.

The festive printed outer makes them a reasonable fit for Christmas markets, seasonal pop-ups, hotel lobbies, and any operator wanting to give their hot drink offering a seasonal feel without additional cost or effort. They come in a pack of 500, which suits most operators through a full festive trading period without excessive stock-holding.

A few practical points worth noting before ordering:

• Double wall design eliminates the need for additional cup sleeves at point of service
• Rolled rim reduces cup flex and helps prevent spillage in transit
• Recyclable through specialist streams — availability of local recycling facilities should be confirmed before use
• Festive print suits seasonal activation without additional branding outlay
• Available in a smaller 8oz format for operators running a mixed cup size range

These cups are well suited to operators serving standard hot drinks — filter coffee, tea, hot chocolate, and similar. They are not intended for use with lids designed for different cup formats, so it is worth confirming lid compatibility with your existing stock before committing to volume. If you are unsure which size or format best fits your service setup, the team is happy to help.

These Fiesta single wall kraft hot cups are a straightforward, practical choice for cafés and catering operations serving flat whites, espressos, cortados, or small speciality coffee drinks. The 6oz size is a common standard for these formats and works equally well for tasting samples or small accompaniment portions. The kraft paper finish gives a clean, unfussy appearance that suits most counter and grab-and-go presentations.

The rolled rim adds a degree of structural integrity to the cup, reducing flex when held and helping to prevent accidental spills during handover. As single wall cups, they are better suited to shorter dwell times or use alongside a sleeve or carrier — they are not designed to insulate in the way a double wall cup would. For venues where customers typically move straight to a seat or counter, this is rarely a practical issue.

A few points worth noting before ordering:

• Paper construction with a PE lining — recyclable only through specialist recycling streams, not general kerbside
• Compatible with Fiesta 6oz and 8oz lids, giving flexibility across cup sizes
• Supplied in cases of 1000, suitable for moderate to high-volume café environments
• Kraft finish works well with stamp or sticker branding if a branded cup programme is not in place

The PE lining means these cups cannot go into standard paper recycling. If your operation has a sustainability commitment or a specific recycling scheme in place, it is worth confirming your local provisions before committing to volume. Fully recyclable or compostable alternatives exist if that matters to your venue.

If you are unsure whether this cup size and format is the right fit for your drinks menu or service setup, we are happy to talk it through.

These are single-wall takeaway coffee cups with a corrugated outer layer — commonly known as ripple wall cups. The construction creates a small air gap between the inner and outer surfaces, which serves two practical purposes: it slows heat loss from the drink, and it keeps the outer surface at a comfortable temperature for the customer to hold without a separate sleeve. They are supplied in packs of 500 and are manufactured from corrugated cardboard.

For a busy café counter or catering operation turning over a high volume of hot drinks, ripple wall cups are a reliable everyday choice. They hold their shape well under normal service conditions and handle standard espresso-based drinks at typical serving temperatures without softening or distorting. The 225ml capacity suits a standard 8oz serving, which covers the most common small-to-medium coffee sizes.

• Ripple wall construction removes the need for a separate cup sleeve
• Keeps drinks warmer for longer during customer carry time
• Comfortable to hold straight from the counter without burning fingers
• Recyclable construction supports front-of-house sustainability messaging
• Pack of 500 reduces reorder frequency for steady-volume sites

There is nothing particularly complex to consider here in terms of installation or setup — these are simply stacked at the point of service. Storage space for the 500-cup pack is worth factoring in if your back-of-house or counter space is limited. They are suitable for standard lidded takeaway service; lid compatibility should be confirmed against the cup diameter before ordering in bulk.

These cups are well suited to cafés, coffee shops, canteens, and catering operations serving a consistent volume of hot drinks where a clean, presentable takeaway cup is needed. If your operation runs at very high volumes and you are looking at multiple pack sizes or cup sizes across your range, it is worth having a conversation with us to make sure you are ordering the right combination.

These Fiesta takeaway coffee cups are a practical, recyclable option for cafés, bakeries, and any hospitality operation serving hot drinks to go. The 455ml / 16oz capacity suits standard large coffee drinks, and the black finish presents well on a counter or at the point of service.

The corrugated cardboard ripple wall does the job it needs to do during a busy service — it keeps drinks at temperature without the customer needing a separate sleeve, and it provides a comfortable, secure grip even when the cup is filled with a very hot drink. For counter staff handling multiple drinks at once, that practical protection matters.

• Ripple wall construction reduces heat transfer to the hand, no separate sleeve needed
• Corrugated cardboard supports heat retention during service and transit
• Recyclable material, suited to operations managing waste streams carefully
• Black colouring presents cleanly across café and street food settings
• Pack of 25 suits lower-volume or trial use before committing to larger quantities

The 25-cup pack size is well suited to lower-volume outlets or as a trial quantity before ordering in bulk. Higher-volume sites running multiple hot drink service points through a full day will typically require larger pack quantities — this format is unlikely to be the most cost-effective route at significant scale.

If you are unsure which cup size or pack format best matches your service volume, we are happy to talk it through.

These are single-use 225ml (8oz) hot drink cups from Fiesta, made from corrugated cardboard and finished in red. The ripple wall construction creates an air gap between the drink and the outer surface, which keeps the exterior cooler to the touch without requiring a separate cardboard sleeve. The rolled rim adds structural rigidity, helping the cup hold its shape when held or carried.

In a busy takeaway or café environment, cups like these need to perform reliably across a full service period. The corrugated cardboard wall handles standard hot drink temperatures without softening quickly, and the rolled top edge reduces the likelihood of the cup deforming under grip pressure — a common cause of spills during handover. The red colouring is consistent across the pack and suits branded or colour-coded service setups.

Practical points worth noting for operators:

• Ripple wall eliminates the need for separate cup sleeves, saving time at point of service
• Recyclable construction supports waste stream requirements for many operators
• Rolled rim maintains cup shape and reduces spill risk during handover
• Red finish works well for colour-coded drink identification or branded presentation
• Standard 8oz sizing is compatible with most commercial espresso and filter coffee setups

These cups are suited to cafés, coffee counters, street food operations, and any takeaway setting where hot drinks are served to go. They are a practical choice for moderate-volume service. For higher-volume sites running continuous service, it is worth considering larger pack sizes to reduce restocking frequency.

If you are unsure about the right cup size or quantity for your service volume, the team is happy to help you work it out.