Dryflow

The Dryflow JetDri Mark II is a wall-mounted electric hand dryer finished in white, built for commercial washrooms in hospitality, leisure, and food service environments. It is designed as a practical, low-running-cost alternative to paper towel dispensers, with adjustable power output to balance drying speed against energy consumption depending on the time of year and footfall demands.

In day-to-day use, the dryer handles steady washroom traffic reliably without the maintenance overhead of paper towel restocking. An internal heater switch allows operators to introduce warm air during colder months for a more comfortable experience, and switching to a lower power setting in warmer weather helps manage running costs without sacrificing usable performance. The stainless steel construction holds up well in environments where wall-mounted fixtures take knocks, and anti-vandal fixings are included as standard — a sensible feature in publicly accessible or high-footfall washrooms.

• Adjustable power output allows running cost control across seasons
• Internal heater switch provides warm air drying in colder conditions
• Stainless steel casing resists surface damage in busy environments
• Anti-vandal screw fixings reduce tampering risk in public washrooms
• Eliminates paper towel waste, lowering ongoing consumable costs

Installation is straightforward — the unit is wall-mounted and connects to a standard mains supply. It is worth confirming the wall surface and fixings are appropriate for the weight of the unit before installation, and ensuring adequate clearance around the dryer for comfortable use. The compact footprint makes it suitable for smaller washroom layouts where space is limited.

The JetDri Mark II is well suited to smaller hospitality venues, hotel washrooms, staff facilities, and light-to-medium footfall public washrooms. For very high-volume sites such as large event spaces or busy pub washrooms, a higher-capacity model with faster cycle times may be worth considering.

If you are unsure whether this model suits your site layout or expected throughput, we are happy to talk it through before you order.

The Dryflow Slimforce is a wall-mounted automatic hand dryer finished in brushed satin stainless steel. Its notably shallow profile makes it a practical choice for washrooms where wall space or projection depth is restricted, such as compact cloakrooms in restaurants, hotel corridors, or bar washrooms where footfall is steady but the room itself is small.

In day-to-day use, the Slimforce delivers a concentrated airflow that dries hands quickly without requiring the kind of power draw associated with older high-wattage models. It can operate at reduced power, which is useful for operators looking to manage energy consumption across a busy site with multiple units running throughout service. The stainless steel housing is well suited to commercial washroom environments where durability and ease of wiping down are priorities.

Practical advantages for operators include:

• Shallow projection suits tight washroom layouts without compromising accessibility
• Vandal-resistant fixing reduces maintenance call-outs in public-facing sites
• One-piece weld-free cover keeps cleaning straightforward between services
• Adjustable power settings allow energy use to be matched to demand
• Brushed satin finish holds up well in daily commercial use

Installation is straightforward — the unit is wall-mounted and connects to a standard mains supply. It is light enough for a single installer to handle comfortably. No specialist ventilation or drainage is required. The shallow depth means it can be positioned in locations where a bulkier dryer simply would not fit, though it is worth checking projection clearance against any accessibility requirements relevant to your site.

The Slimforce is well suited to small to medium washrooms in hospitality and foodservice settings — restaurants, cafés, hotels, and licensed premises. For higher-volume sites such as large event venues or busy motorway services where multiple units run continuously under heavy demand, a higher-capacity model may be worth considering.

If you are unsure whether this unit is the right fit for your washroom layout or usage levels, we are happy to talk it through.

The Dryflow Infinity is a wall-mounted high-speed hand dryer designed for commercial washrooms that see consistent, heavy footfall. It uses a curved airflow drying system paired with a brushless motor to deliver fast drying without the noise levels associated with older high-speed units. Power output is adjustable between standard and heated drying modes, which allows operators to balance drying speed against energy consumption depending on the time of day or volume of use.

In busy service environments — staff canteens, contract catering facilities, food production sites — hand dryer reliability and hygiene performance matter as much as speed. The Infinity includes a HEPA filter rated to capture a high proportion of airborne bacteria, which is a meaningful consideration in food-adjacent washrooms where hygiene standards are scrutinised. The brushless motor is maintenance-free in normal operation, which reduces the servicing burden over time.

Key practical advantages include:

• Adjustable power output to manage energy use during quieter periods
• HEPA filtration supporting hygiene compliance in food-sector washrooms
• Brushless motor requiring no routine maintenance
• Connect+ plug-in system for straightforward installation and servicing access
• Brushed satin finish in stainless steel and ABS, suitable for commercial washroom aesthetics

Installation is straightforward — the Connect+ system is designed to simplify both fitting and any future servicing. At 3.5kg, the unit is light enough for a single person to handle during installation, though wall fixings should be appropriate for the substrate. It is mains-powered with a variable wattage range, so it is worth confirming your electrical supply is compatible before ordering.

The Infinity is well suited to medium- to high-footfall commercial washrooms, including those in hospitality venues, workplace canteens, and food production facilities where hygiene standards are a priority. For very high-volume sites with near-continuous use, it is worth discussing whether a heavier-duty unit would better suit the demand.

If you are unsure whether this model is the right fit for your site, our team is happy to talk it through with you.

The Dryflow JetDri Mark II is a wall-mounted commercial hand dryer finished in black stainless steel. It operates across a variable power range, allowing the output to be adjusted between a lower energy-saving mode and a higher-power setting for faster drying — a practical balance between running cost and performance depending on the season or footfall level. An internal heater switch gives operators the option of warm air when conditions demand it, or cooler airflow during warmer periods to reduce energy consumption.

In a busy washroom environment — whether in a pub, hotel, restaurant, or leisure facility — hand dryers take considerable punishment. The JetDri Mark II is constructed from thick stainless steel and fixed with anti-vandal screws, which makes it a sensible choice for public-facing or high-traffic locations where durability and resistance to interference matter. The black finish suits venues where aesthetics are a consideration alongside function.

From an operational standpoint, the key practical advantages are straightforward:

• Adjustable power output helps manage running costs across different seasons
• Anti-vandal fixings reduce maintenance and replacement risk in public areas
• Stainless steel construction is durable and easy to wipe down
• Eliminates the ongoing cost and waste associated with paper towels
• Compact wall-mount footprint suits washrooms where space is limited

Installation requires a suitable mains electrical connection and wall fixings appropriate for the substrate. At 4.6kg the unit is straightforward to mount, though it is worth confirming wall construction before installation, particularly in older or partitioned buildings. No plumbing or ventilation work is required.

The JetDri Mark II is well suited to small and mid-sized hospitality and catering venues — pubs, cafés, restaurants, and hotels — where a reliable, no-fuss hand dryer is needed without the cost of a high-speed jet model. For very high-footfall sites such as large event venues or busy motorway services, a higher-capacity unit may be worth considering.

If you're unsure which hand dryer specification fits your washroom layout or usage level, the team is happy to talk it through before you order.

The Dryflow JetDri Mark II is a wall-mounted commercial hand dryer finished in brushed satin stainless steel. It operates across a variable power range, allowing the heat output to be adjusted depending on the season or the preference of the site — a built-in heater switch lets operators run the unit warm in colder months and switch to a cooler, lower-energy mode during warmer periods. It is a straightforward, dependable unit without unnecessary complexity.

In commercial washroom environments, the JetDri Mark II holds up well to consistent daily use. The stainless steel casing is robust and resists surface damage in high-traffic areas, and the anti-vandal fixings make it a practical choice for publicly accessible facilities where durability and security matter. It is commonly found in staff washrooms, hospitality venues, and similar settings where a reliable, low-maintenance solution is needed.

From an operational standpoint, the key practical advantages are:

• Adjustable power output reduces energy consumption when full heat is not required
• Stainless steel finish is easy to wipe down and maintains appearance over time
• Anti-vandal fixings provide additional security in public-facing installations
• No consumables — eliminates the ongoing cost and waste of paper towel dispensers
• Five-year parts and labour warranty gives reasonable long-term assurance

Installation requires a standard mains electrical connection and a suitable wall surface capable of supporting the unit. At 4.6kg it is light enough for a straightforward single-person installation, though electrical work should always be carried out by a qualified electrician. The unit suits most standard washroom wall configurations, but it is worth checking available wall space and proximity to sockets before ordering.

The JetDri Mark II is well suited to small-to-medium commercial venues — hotels, cafés, restaurants, leisure facilities, and office premises — where a cost-effective, presentable hand dryer is needed without the operational overhead of paper towel systems. For very high-footfall sites such as large event venues or busy transport facilities, a higher-capacity model with faster cycle times may be worth considering.

If you are unsure whether this model is the right fit for your site or want to talk through your washroom setup, we are happy to help.

The Dryflow JetDri Mark II is a wall-mounted electric hand dryer designed for commercial and hospitality washrooms. It operates at 1.8kW and offers two selectable airflow modes — a warm setting for user comfort and an eco setting that reduces energy consumption during quieter periods. The polished chrome finish suits washrooms where appearance matters alongside function.

In practical use, the unit handles low to moderate footfall reliably. It is rated for environments seeing up to around 100 uses per day, making it a sensible fit for smaller cafés, guest houses, offices, and similar settings where the washroom sees steady but not heavy traffic. The high-speed motor delivers a fast dry time, keeping queues moving during short peak periods without excessive noise levels.

From an operational standpoint, the JetDri Mark II offers a few practical advantages worth noting:

• Two airflow modes allow facilities teams to balance comfort against running costs depending on the time of day or season
• IP23 protection makes it suitable for washroom environments where some moisture exposure is unavoidable
• Anti-vandal fixings reduce the risk of tampering in less supervised areas
• The stainless steel shell is straightforward to wipe down and maintain

Installation requires a standard mains electrical connection. The unit is surface-mounted to the wall, so fixings into the wall substrate need to be appropriate for the surface type. IP23 protection means it is splash-resistant but not suitable for direct water exposure, so positioning relative to sinks and splashback areas is worth considering before fitting.

This model is best suited to lower-traffic washrooms in hospitality, small food service operations, or office environments. For sites with significantly higher footfall or washrooms under continuous pressure during service, a higher-capacity unit with a greater duty rating would be a more appropriate choice.

If you are unsure whether this model suits your washroom layout or usage levels, we are happy to talk it through.

The Dryflow Ostro is a wall-mounted electric convector panel heater designed for indoor commercial and hospitality spaces where reliable, controllable background heat is needed. It uses an X-shaped aluminium heating element to circulate warm air evenly across the room, and its slim panel format means it sits flush against the wall without taking up floor space or obstructing walkways.

In practice, this type of heater suits spaces that need consistent ambient warmth rather than rapid high-volume heat recovery — hotel rooms, office suites, reception areas, staff break rooms, and similar environments where occupancy is predictable and the heating requirement is steady. The half-power setting allows the unit to maintain temperature between periods of peak demand without running at full output continuously, which helps keep running costs in check over the course of a working day.

Several built-in features make it practical for managed or public-facing environments:

• 24/7 programmable timer to align heating with opening hours and avoid unnecessary overnight running
• Open window detection that reduces output automatically when a sudden temperature drop is sensed
• Child lock to prevent accidental adjustment in public or guest-facing spaces
• Half-power mode for cost-efficient temperature maintenance
• 1.5 metre power cord allowing flexible positioning relative to wall sockets

Installation is straightforward — the unit is designed for wall mounting and runs from a standard mains supply, so no specialist electrical work is typically required beyond a suitable fixing point and socket placement. It is worth confirming the wall surface and stud layout before mounting, particularly in older or partitioned commercial buildings where fixing points may be limited.

The Ostro is well suited to smaller or medium-sized rooms in hotels, offices, and hospitality venues where a discreet, programmable heating solution is needed. It is not intended for industrial or high-humidity environments such as commercial kitchens or laundry areas. If you need to heat a larger or open-plan space, a higher-output model or multiple units may be more appropriate.

If you are unsure whether this heater is the right fit for your space or layout, we are happy to talk it through before you order.

The Dryflow Ostro is a wall-mounted electric convector panel heater designed for customer-facing spaces such as hotel rooms, waiting areas, staff rooms, and similar public or semi-public environments. It is not a commercial kitchen appliance — its role is background space heating in areas where guest or staff comfort matters.

The unit uses an X-shaped aluminium heating element to distribute warmth quickly and evenly across a room. Full and half power settings allow straightforward adjustment to suit ambient conditions or occupancy levels, and the 24/7 programmable timer means heating can be matched precisely to your operating hours rather than running continuously.

From an operational standpoint, the Ostro includes a few features that make a practical difference in managed properties:

• Open window detection automatically powers the unit down when a sudden drop in room temperature is detected, reducing energy waste in guest rooms
• A built-in child lock prevents guests or visitors from overriding settings — useful in hotels or family facilities
• The programmable timer supports heating schedules aligned to check-in times, opening hours, or shift patterns
• Slim panel design mounts flush to the wall, keeping floor space clear

Installation is straightforward for a qualified electrician. The unit requires a standard mains connection and wall fixings suitable for the surface type. At 1.5kW it is appropriate for smaller rooms; larger or poorly insulated spaces may need a higher-output model to maintain comfortable temperatures.

This heater is best suited to smaller individual rooms or areas where background warmth is needed on a timed or demand-led basis. For larger spaces or multi-room installations, it is worth considering a higher-output alternative.

If you are specifying heating across multiple rooms or areas and want to discuss the right output level for each space, the team is happy to help you think it through before you order.

The Dryflow Ostro+ is a wall-mounted electric convector panel heater with built-in Wi-Fi connectivity. It is designed to provide controllable, energy-efficient background heat in indoor commercial spaces — staffrooms, reception areas, dining rooms, offices, and similar environments where consistent comfort is needed without the complexity of a centralised heating system.

In practical use, the unit suits spaces where heating demand varies across the day or week. The full-power and half-power modes allow operators to balance warmth against running costs depending on occupancy, and the open window detection feature reduces wasted output automatically when ventilation causes a sudden temperature drop. The X-shaped aluminium heating element distributes heat steadily across the room rather than concentrating warmth in a single zone.

Key operational advantages include:

• Remote temperature adjustment via a smartphone app — useful for spaces not always staffed
• Fully programmable 24/7 timer to align heating schedules with opening hours
• Half-power mode to help manage energy consumption during quieter periods
• Open window detection to avoid heating losses going unnoticed
• Child lock for use in public-facing or guest areas

Installation is straightforward — the unit is wall-mounted and requires a standard mains electrical supply. It is worth confirming the room size is appropriate for the 1kW output before purchasing; this rating suits smaller rooms and is not intended for large open-plan areas or spaces with poor insulation. For larger spaces, a higher-output model would be more appropriate.

The Ostro+ is well suited to small commercial rooms, back-of-house staff areas, and front-of-house spaces where controllable, unobtrusive heating is needed alongside the convenience of remote management. If you are heating a larger area or have multiple zones to consider, it is worth discussing the right combination of units before ordering.

The Dryflow Ostro is a wall-mounted electric convector panel heater designed for commercial and hospitality spaces where consistent background warmth is needed without occupying floor space. It uses an X-shaped aluminium heating element to distribute heat evenly across the room, and its slim panel profile is intended to sit unobtrusively against the wall in guest-facing environments.

In practice, this heater suits spaces where heating runs on a predictable schedule rather than responding to high-demand peaks. It performs reliably in smaller to medium-sized rooms — guest bedrooms, waiting areas, treatment rooms, or office spaces — where steady ambient temperature is the priority rather than rapid heat recovery across a large volume.

From an operational standpoint, the Ostro offers several practical advantages for hospitality and commercial property managers:

• Fully programmable on a 24/7 schedule to align with occupancy patterns and business hours
• Choice between full power and a half-power energy-saving mode to help manage running costs
• Open window detection reduces unnecessary energy use when ventilation is introduced
• Child lock prevents unauthorised adjustment in public-facing areas
• Wall-mounted installation keeps floor space clear and the unit out of reach

Installation is straightforward — the unit is wall-mounted and supplied with a 1.5-metre power cord, giving some flexibility in positioning relative to the nearest socket. No specialist installation is typically required, though positioning should account for airflow around the unit and proximity to soft furnishings.

This model is well suited to smaller individual rooms or supplementary heating in compact commercial spaces. For larger open areas or rooms with higher heat-loss characteristics, a higher-output model would be more appropriate. If you are unsure which output is right for a particular space, we are happy to talk it through.

The Dryflow Ostro+ is a wall-mounted electric convector panel heater designed for spaces where reliable background warmth and remote management are both practical requirements. At 1.5kW, it is suited to small-to-medium rooms such as hotel bedrooms, staff offices, waiting areas, and reception spaces where a fixed, discreet heating solution is preferable to portable alternatives.

The built-in Wi-Fi module connects to Dryflow's dedicated app, allowing temperature and scheduling to be adjusted remotely without entering the room. This is particularly useful in hospitality settings where staff need to pre-heat guest rooms ahead of arrival or manage heating across multiple spaces from a single device. The unit runs at full 1.5kW output for rapid warm-up or drops to a half-power mode to hold a comfortable ambient temperature with lower energy draw.

From an operational standpoint, the Ostro+ includes several features that reduce unnecessary energy consumption:

• Open window detection — cuts power automatically when a sudden temperature drop is sensed
• Fully programmable 24/7 timer — heating runs only when required
• Half-power mode — maintains temperature without running at full load
• Child lock — prevents accidental adjustment in public-facing areas
• App-based remote control — adjustments without needing to be on-site

Installation is straightforward wall mounting with a standard mains connection. The slim panel profile keeps wall projection minimal, and the 595mm width fits neatly within most standard wall bays. It is worth confirming that your Wi-Fi signal reaches the intended location reliably before installation, as the app functionality depends on a stable connection.

The Ostro+ is well suited to individual rooms or small commercial spaces requiring controllable, low-maintenance electric heating. For larger open areas or spaces with higher heat loss, a higher-output model is likely to be more appropriate.

If you are specifying heating across multiple rooms or want to discuss whether this unit is the right fit for your setup, we are happy to help.

The Dryflow Ostro+ is a wall-mounted electric convector panel heater designed for smaller commercial spaces such as guest rooms, waiting areas, staff rooms, and front-of-house areas. It runs on a 2kW element and connects to Wi-Fi, allowing heating schedules and temperature settings to be managed remotely via a smartphone app — a practical feature for hospitality operators who need to manage multiple rooms without adjusting each unit individually.

The X-shaped aluminium element is designed to distribute heat quickly and evenly across the room. An open window detection system monitors for sudden temperature drops and cuts power automatically, which helps limit unnecessary energy use in rooms that are not properly sealed. Full and half power modes give operators a straightforward way to balance comfort against running costs depending on occupancy levels.

From a practical standpoint, the Ostro+ offers several features that suit a managed property environment:

• Wi-Fi scheduling reduces the need for manual adjustment room by room
• Half-power mode helps manage energy consumption in lower-occupancy periods
• Open window detection prevents energy waste in unattended rooms
• Slim wall-mounted profile keeps floor space clear
• Built-in child lock prevents tampering in guest-accessible areas

Installation is straightforward — the unit is wall-mounted and requires a standard electrical connection. It is worth confirming your wall surface and fixing requirements before installation, particularly in older buildings where wall construction may vary. The 830mm width means it suits most standard wall bays without modification.

This model is well suited to individual rooms or smaller spaces where a single 2kW output is sufficient. For larger open areas or high-traffic zones where faster heat recovery or greater output would be beneficial, a higher-capacity unit may be more appropriate.

If you are unsure whether this model suits your property layout or heating requirements, our team is happy to talk it through with you before you order.

The Dryflow EcoWave is a wall-mounted, touch-free hand dryer designed for commercial and hospitality washrooms. It uses a wide-bladed air outlet to direct airflow across both hands simultaneously, removing moisture quickly without the noise levels associated with older high-speed dryers. The HEPA filtration means that the air being expelled has been filtered before it reaches the user's hands, which is a relevant consideration in food service and healthcare-adjacent environments where hygiene standards are closely scrutinised.

In practical terms, the EcoWave is well suited to moderate-traffic washrooms — the kind found in restaurants, cafés, bars, hotels, and similar hospitality venues. It handles steady footfall comfortably during service periods. For very high-volume sites such as large event venues or busy transport catering operations, a higher-capacity unit may be worth considering, but for most standard hospitality washroom layouts this dryer performs reliably without drawing excessive attention to itself in terms of noise or energy draw.

The key operational advantages worth noting:

• Touch-free sensor activation reduces cross-contamination risk in food service washrooms
• HEPA-filtered airflow supports hygiene compliance in catering environments
• Low operating wattage keeps running costs down compared to older dryer technology
• Slim wall profile suits compact or narrow washroom layouts
• Brushed satin stainless-steel finish holds up well against surface marking and minor wear

Installation is straightforward — the unit is wall-mounted and requires a standard mains electrical connection. Its shallow depth makes it practical in tighter spaces where a bulkier unit would obstruct movement or conflict with adjacent fixtures. No specialist ventilation is required.

The EcoWave is a sensible, low-maintenance choice for hospitality operators who want reliable, hygienic hand drying without high running costs or an intrusive installation footprint. If you're fitting out multiple washrooms or want to confirm suitability for a specific site layout, the team is happy to talk it through with you.

The Dryflow G-Force MKII is a touch-free, high-speed hand dryer designed for continuous use in commercial and hospitality environments. Built into a brushed satin stainless steel casing, it combines a robust, vandal-resistant construction with a finish that suits professional washroom settings — from hotel lobbies and leisure facilities through to staff welfare areas in busy kitchens and food service operations.

In practice, the G-Force MKII handles sustained throughput well. The adjustable power output means operators can balance drying speed against noise levels depending on the environment — a useful option where quieter operation is a priority, such as in hotel or spa settings, without sacrificing practicality during peak washroom use.

A HEPA filter is fitted as standard, which traps airborne particles before air is delivered to the user's hands. This is a meaningful feature in food service and hospitality environments where hygiene standards are closely scrutinised. Other practical advantages worth noting include:

• Touch-free operation reduces cross-contamination risk at the handwashing point
• Adjustable energy and noise settings allow the unit to be tuned to its environment
• Plug-in wall attachment system allows straightforward removal for cleaning or servicing without calling in an electrician
• Vandal-resistant stainless steel casing holds up well in high-traffic or unsupervised washrooms
• Brushed satin finish is practical to wipe down and presents well in customer-facing areas

Installation is straightforward. The plug-in attachment system means the unit can be wall-mounted and detached without specialist disconnection work, which keeps ongoing maintenance access simple. Standard electrical connection is required; siting near an appropriate supply point is the main installation consideration. The unit is wall-mounted, so floor space is not a factor, though ceiling height and the working height of users should inform positioning.

The G-Force MKII is well suited to hotels, restaurants, leisure venues, and staff washrooms in commercial kitchens where a reliable, hygienic hand dryer is needed and presentation matters. For very high-volume public facilities with near-constant footfall, it is worth considering whether a higher-capacity model would better meet demand. Equally, for a small back-of-house staff toilet, a simpler unit may be sufficient.

If you are specifying washroom equipment across a site or want to talk through which model fits your footfall and environment, the team is happy to help.

The Dryflow SteelForce SFSS02 is a hands-in blade-style hand dryer built for washrooms that see continuous, heavy footfall. Rather than directing air onto hands from above, the hands-in design channels a high-velocity airflow around both sides of the hands as they are lowered into the unit, containing water droplets within the cavity and keeping the surrounding wall and floor area dry. The stainless steel housing is constructed from 1.2mm-gauge sheet, which gives it the rigidity to withstand the kind of incidental knocks and contact that occur in busy public washrooms over years of use.

In operational terms, the SFSS02 is rated for in excess of 300 activations per day, which makes it a practical choice for venues where peak periods are sustained — hotel conference facilities, stadium concourses, and airport lounges among them. The brushless motor runs at 21,000 RPM and contributes to a dry time in the 10–12 second range, keeping throughput moving during busy service windows. Because brushless motors have fewer wearing components than brushed alternatives, maintenance demands over the unit's service life are reduced. A blue guidance light assists users in positioning their hands correctly, which in practice reduces incomplete drying and the splash associated with poor hand placement.

The integrated HEPA filtration system filters intake air before it contacts the user's hands, removing a high proportion of airborne bacteria. This is a meaningful consideration in food-service and hospitality environments where hand hygiene standards are scrutinised, and it supports compliance with washroom hygiene policies without additional consumables. The IPX4 water-resistance rating confirms the unit is suitable for installation in wet washroom environments.

• Hands-in blade design contains water droplets within the unit
• HEPA filtration supports strong hand hygiene standards
• Stainless steel shell resists damage in high-traffic areas
• Rated for high daily activation volumes without performance loss
• IPX4 rating confirms suitability for wet washroom installation

Installation requires a mains electrical connection; the unit should be positioned at a comfortable working height on a solid wall capable of supporting it. Recess-mounting is not a standard option for this model, so surface area around the unit should be accounted for in washroom planning. The SFSS02 is well suited to hotels, stadiums, airports, and similar hospitality or leisure venues with continuous washroom demand. For smaller or lower-traffic washrooms, a lower-capacity model may be the more appropriate and cost-effective choice.

If you are specifying hand dryers across multiple washroom locations or want to confirm the SFSS02 is the right fit for your footfall levels and installation conditions, the team is happy to talk it through with you.

The Dryflow Jet Force Plus JFPL07 is a wall-mounted jet hand dryer designed for medium-traffic commercial washrooms. It uses a high-speed motor to direct a concentrated blade of air across the hands, guided by a blue positioning light to help users target moisture effectively. A built-in HEPA filter captures 99% of airborne bacteria before the air reaches hands, making it a practical choice where hygiene standards need to be demonstrably maintained — hotels, restaurants, and healthcare-adjacent facilities in particular.

In day-to-day use, the dryer handles up to 300 cycles per day without issue, which comfortably covers the throughput of a busy restaurant or hotel washroom during peak service. The drying process completes in around 10 to 12 seconds, which keeps queues moving and reduces the temptation for users to wipe hands on clothing or paper. Any water displaced from hands is channelled into an 800ml collection tray rather than pooling on the floor — a straightforward but genuinely useful feature that reduces slip risk and lightens housekeeping workload.

From an operational standpoint, the key practical advantages include:

• HEPA filtration providing cleaner airflow for hygiene-sensitive environments
• Integrated water collection tray reducing floor wetness and slip hazard
• Switchable hot and cool modes with automatic temperature control to limit unnecessary energy draw
• Antimicrobial ABS casing and IPX4 splash rating supporting durability in washroom conditions
• Blue positioning light improving drying accuracy and reducing average cycle time

Installation is straightforward — the unit is mains-powered and wall-mounted, requiring a standard electrical connection. IPX4 splash resistance means it can be sited near basins without concern, though it is not rated for wet-room or outdoor installation. The unit is suited to medium-traffic sites; for washrooms serving very high footfall continuously throughout the day, a higher-capacity model may be worth considering.

This dryer is well suited to hotel washrooms, restaurant and café facilities, leisure centres, schools, and similar settings where a reliable, hygienic hand-drying solution is needed without the complexity or cost of a premium commercial unit. It sits in a practical mid-range position — capable enough for consistent daily use, straightforward to maintain, and honest about its medium-traffic rating.

If you are unsure whether this model is the right fit for your footfall levels or washroom layout, the team is happy to talk it through before you commit.

The Dryflow Slimforce DFLIF04 is a wall-mounted electric hand dryer designed for washrooms where space is limited but a clean, professional finish is still expected. Its narrow profile — just 10cm deep — keeps it well clear of walkways and tight corridors, while the high-velocity airflow dries hands quickly without the bulk of a conventional unit. The stainless steel casing and anti-vandal fixings give it the kind of build quality that holds up in commercial environments without requiring constant attention.

In practical use, the Slimforce suits lower-traffic washrooms well — think hotel corridors, office facilities, staff welfare areas, or front-of-house toilets in smaller hospitality venues. The internal switch allows operators to choose between a standard warm-air setting for guest comfort or an eco mode drawing just 0.6kW, which is worth considering anywhere energy consumption is being managed. At higher footfall levels, operators should assess whether a higher-capacity unit would better match demand.

Key operational points worth noting:

• Slim 10cm depth keeps the unit unobtrusive in narrow washrooms
• Dual airflow settings allow a balance between comfort and energy saving
• Stainless steel one-piece cover resists damage and is straightforward to wipe down
• Integrated filter helps maintain cleaner air delivery over time
• Anti-vandal fixings reduce tampering risk in semi-public areas

Installation requires a standard mains electrical connection and a suitable wall surface to carry the unit's weight. The IP23 rating provides protection against dust and light moisture, making it appropriate for typical washroom conditions, though it is not rated for wet-room or high-humidity environments. Wiring should be carried out by a qualified electrician in line with current UK regulations.

The DFLIF04 is best suited to sites with moderate daily footfall where energy efficiency and a tidy installation matter. For busier venues — high-volume restaurant washrooms or large leisure facilities — a higher-capacity model with faster throughput may serve better. If you are unsure which specification matches your washroom layout or expected usage, the team is happy to talk it through.

The Dryflow Jet Force Pro JF1G is a wall-mounted jet-style hand dryer designed for commercial washrooms that see consistent, heavy footfall. It delivers a rapid dry cycle supported by a brushless motor running at 20,000 RPM, which draws less energy per rotation than conventional brush motors and is built to sustain a longer service life with reduced mechanical wear. A built-in HEPA filter purifies incoming air before it contacts the user's hands, making it a practical choice wherever hygiene standards are a priority — including healthcare, hospitality, and food-service environments.

In high-traffic settings, a hand dryer needs to perform reliably across hundreds of daily cycles without staff intervention. The JF1G is rated for over 300 activations per day and incorporates a concealed 1000ml water collection tray that captures drip-off from wet hands, reducing the floor hygiene burden during busy service periods. A blue guidance light helps users position their hands accurately, which improves drying efficiency and reduces the likelihood of residual moisture being carried into adjacent areas.

From an operational standpoint, the unit offers several practical advantages:

• HEPA filtration removes 99.99% of bacteria from the air supply
• Self-regulating heater only activates when ambient temperature requires it, keeping running costs in check
• IPX4-rated housing is suitable for washrooms with water splash risk
• Impact and flame-resistant ABS shell with antimicrobial coating supports durability and hygiene
• Clear error-code diagnostics simplify fault identification for maintenance teams

Installation is straightforward — the unit is wall-mounted and hardwired. It is worth confirming your electrical supply and available wall space before fitting, particularly in smaller facilities where positioning relative to sinks and traffic flow will affect usability. The IPX4 rating makes it appropriate for wet-area installation, but it is not rated for outdoor or exposed environments.

The JF1G is well suited to mid-to-high-traffic commercial washrooms in hotels, restaurants, leisure facilities, and similar venues. For very high-volume sites — large event spaces or transport hubs, for example — it is worth considering whether a heavier-duty unit with greater throughput capacity would be more appropriate. Equally, lower-footfall settings may not require the full specification this model offers.

If you are unsure whether the JF1G is the right fit for your washroom layout or usage level, our team is happy to talk it through with you.

The Dryflow BulletDri Plus BDBL01 is a high-speed jet-style hand dryer with integral HEPA filtration, designed for busy commercial and public washrooms where throughput, hygiene, and reliability all matter. It operates at a 100mm depth, making it one of the slimmer units available in this category — a practical consideration where wall space or circulation around basins is limited.

In high-traffic environments, dry time consistency is important. The BDBL01 delivers a 10–12 second dry cycle driven by a brushless motor rated for extended continuous use, which means it holds up well under the kind of repeated demand you'd expect in a stadium, transport hub, hotel, or busy restaurant. The brushless motor design also reduces the maintenance burden compared with brushed alternatives — there are no carbon brushes to wear and replace over time.

From an operational standpoint, the unit offers a few considered features:

• HEPA filtration captures airborne bacteria before the airflow reaches users' hands, supporting washroom hygiene standards
• Selectable heater element allows operators to balance user comfort against energy consumption depending on the season or site preference
• Two airflow settings give flexibility between faster drying and quieter, lower-energy operation
• A guiding blue LED helps users position their hands correctly, which reduces incomplete drying and keeps the flow moving
• Vandal-resistant stainless steel cover and IP23 protection make it appropriate for less supervised public areas

Installation is straightforward for a qualified electrician — the unit is mains-powered and wall-mounted. The IP23 rating means it is suitable for washroom environments but is not rated for areas where it may be subject to direct water spray or outdoor exposure. At 100mm projection from the wall, it is well suited to tighter washroom layouts, though you should confirm wall construction can take the fixing load before specifying it in a refurbishment.

The BDBL01 is a solid choice for hospitality venues, leisure facilities, and any site where a reliable, hygienic, fast-drying unit is needed without excessive bulk. For very high-volume sites processing several hundred users per hour, it is worth considering whether a higher-capacity model with a greater continuous-use rating would be more appropriate. Equally, for smaller, lower-traffic facilities, a more basic unit may represent better value.

If you are specifying hand dryers across multiple washrooms or want to confirm suitability for a particular site, the team is happy to help you work through the options.

The Dryflow BulletDri Plus BDBL02 is a wall-mounted hand dryer designed for high-traffic commercial washrooms. It combines a high-speed motor with a HEPA filtration system that removes 99% of airborne bacteria before air reaches the user's hands — a meaningful consideration in hospitality, healthcare, and food-service environments where hygiene standards are closely observed. The brushed satin stainless steel housing gives it a finish appropriate for front-of-house washrooms as well as back-of-house staff facilities.

In practice, the unit dries hands in the region of 10 to 12 seconds, which keeps throughput moving during peak service periods without creating queues. The two airflow settings allow operators to choose between a warm-air mode and a more economical cool-air mode, useful where running costs are a factor or where noise is a consideration. A blue LED guide helps users position their hands correctly from the outset, which also reduces dripping on the floor around the unit.

A few practical points worth noting for operators:

• Slim 100mm depth suits tight washroom layouts without compromising the motor or filter housing
• Switchable heater element allows warm or eco cool-air operation depending on preference
• Front-mounted dial allows sound output to be adjusted — useful in schools, healthcare settings, or quieter hospitality environments
• HEPA filtration rated to remove 99% of bacteria from the airflow
• Rated for 300-plus uses per day, suited to sustained high-volume washroom traffic

Installation requires a standard mains electrical connection. The unit carries IP23 ingress protection, which covers it for typical washroom splash environments, though it is not rated for wet-room or outdoor use. Wall fixings and surface type should be considered at the installation stage, particularly in tiled or stud-partition walls.

The BulletDri Plus is well suited to hotels, restaurants, staff canteens, schools, and healthcare facilities where a hygienic, presentable, and reliable hand dryer is needed without the bulk of a larger blade-style unit. For sites with exceptionally high footfall or where faster cycle times are a priority, a higher-capacity unit may be worth considering.

If you are fitting out a new washroom or replacing existing units across a site, the team is happy to advise on the right specification for your volume and environment.