Dryflow Hand Dryers

The Dryflow Turboforce TF02 is a high-speed commercial hand dryer finished in polished chrome. It uses a powerful motor to direct a concentrated airflow across palms and between fingers, completing a full dry cycle in roughly 10 to 12 seconds. A blue guiding light indicates the active zone, and a colour-changing LED triangle gives users a clear visual cue that the unit is operational — a small detail that tends to matter in guest-facing environments such as hotels, restaurants, and leisure facilities.

In practice, the short dry time helps maintain throughput in busy washrooms where queues can form quickly during service periods. Two selectable airflow settings give facilities staff some flexibility: a warm air mode for comfort-focused environments, and an eco setting that reduces energy draw during quieter periods. Motor speed can also be adjusted, which is useful in venues where noise levels are a consideration — dining areas with adjacent cloakrooms, for example, or hotel spa facilities.

From an operational standpoint, the main advantages over paper towel dispensers are straightforward:

• Eliminates the cost and restocking time associated with paper towel consumables
• Reduces waste and the cleaning burden around dispensers and bins
• IP23 protection and anti-tamper fixings help manage durability in public-access areas
• Vandal-resistant stainless steel housing supports a longer service life in heavy-use locations

Installation requires a standard mains electrical connection, and the unit is wall-mounted. It is worth confirming wall construction and fixing depth before installation, particularly in tiled or dry-lined washrooms. The polished chrome finish suits more premium environments but will show watermarks more readily than a brushed or satin alternative, so it is worth considering the cleaning regime in place.

The TF02 is well suited to hotel washrooms, restaurant cloakrooms, spa and leisure facilities, and similar guest-facing settings where appearance and speed both matter. For very high-volume sites — stadium concourses, large event venues, or busy motorway services — a higher-capacity unit with a faster cycle or greater durability rating may be worth considering instead.

If you are specifying hand dryers across multiple washrooms or want to discuss which model best suits your environment, the team is happy to help work through the options with you.

The Dryflow Turboforce TF03 is a high-speed wall-mounted hand dryer finished in brushed satin stainless steel. It uses a powerful motor to drive a concentrated airflow across the hands, removing moisture quickly without the need for paper towels or consumables. Two operating modes — warm air and an energy-saving eco setting — allow facilities teams to balance running costs against user comfort depending on the site.

In practice, the TF03 is well suited to washrooms that see sustained, heavy footfall throughout the day. The combination of a fast dry cycle and a built-in blue guidance light helps keep traffic moving in busy facilities, reducing queuing at peak periods. The motor speed is adjustable, which gives some control over noise output — useful in environments where washrooms sit adjacent to dining or front-of-house areas.

From an operational standpoint, the unit offers several practical advantages:

• No consumables to restock — removes paper towel waste and ongoing supply costs
• Vandal-resistant stainless steel housing with anti-tamper fixings for public-facing environments
• Eco mode available to reduce energy draw during lower-traffic periods
• Blue guidance light aids user orientation and helps maintain throughput
• Brushed satin finish suits both back-of-house staff areas and guest-facing washrooms

Installation is straightforward — the unit is mains-powered and wall-mounted, requiring a suitable electrical connection in accordance with current wiring regulations. It carries IP23 protection, making it appropriate for washroom environments, though it is not rated for areas exposed to direct water spray or steam. Ensure the installation position allows adequate clearance beneath the unit for comfortable use.

The TF03 is a reliable choice for catering operations, hotels, leisure venues, and any commercial site where washrooms experience consistent daily use. For exceptionally high-traffic locations — large event venues or transport hubs, for example — it is worth considering whether a heavier-duty or higher-rated model might be more appropriate for the volume involved.

If you are specifying hand dryers across multiple washrooms or want to discuss the right model for a particular site, the team is happy to help work through the options with you.

The Dryflow Turboforce TF01 is a wall-mounted, high-speed electric hand dryer designed for busy commercial washrooms. It uses a powerful motor to produce a concentrated, high-velocity airstream that removes moisture from hands quickly, offering a practical alternative to paper towels in high-footfall environments.

In a busy service environment — a hotel lobby, leisure centre, or fast-food outlet — throughput in the washroom matters. The TF01 is built to keep things moving, with a fast dry cycle that reduces queuing and the ongoing cost and waste associated with paper towel dispensers. The motor offers two airflow settings, allowing operators to balance drying speed against noise where necessary, such as in hotel or spa washrooms where a quieter environment is preferred.

From an operational standpoint, the TF01 offers several practical advantages:

• Two airflow settings allow adjustment for speed or reduced noise to suit the environment
• IP23 protection gives reasonable resistance to water ingress in washroom conditions
• Anti-vandal fixings support installation in publicly accessible or unsupervised areas
• No consumables required, removing the ongoing cost of paper towel restocking
• Carbon neutral certification may support sustainability reporting for operators with environmental commitments

Installation requires a standard mains electrical supply and a suitable wall surface with correct fixing depth. The unit is surface-mounted, so no recess is needed. IP23 rating means it is suitable for typical washroom environments, though it is not rated for wet-room or outdoor installation. Noise output can be adjusted via the internal motor control, which is worth considering during installation if the washroom is adjacent to guest-facing spaces.

The TF01 is a sensible choice for hotels, leisure sites, cafés, casual dining venues, and similar public-facing facilities where washroom throughput and running costs are a practical consideration. For very high-volume transport hub or stadium environments, a unit with a higher duty cycle or greater robustness may be worth considering.

If you are unsure whether the TF01 is the right fit for your site — particularly around noise levels, installation position, or volume requirements — our team is happy to talk it through with you.

The Dryflow BulletDri Plus BDBL03 is a high-speed electric hand dryer with integrated HEPA filtration, finished in polished chrome. It is designed for continuous use in busy commercial washrooms where hygiene, speed, and durability are all practical requirements rather than optional extras.

In high-footfall environments — hotels, leisure facilities, motorway services, stadiums — hand dryers take considerable punishment and need to perform consistently across long service periods. The brushless motor in the BulletDri Plus is built for extended duty cycles, and the vandal-resistant stainless steel housing is well suited to locations where the equipment cannot be closely supervised. IP23 splash protection makes it appropriate for washroom installation without additional precautions against incidental water contact.

From an operational standpoint, the key practical advantages are:

• HEPA filtration removes the majority of airborne bacteria from intake air, supporting hygiene standards in food service and hospitality settings
• Fast dry times reduce washroom queuing during peak periods
• A guiding blue LED encourages correct hand positioning, which improves throughput and reduces floor drips
• Selectable warm or eco airflow modes allow energy use to be managed without compromising performance
• Adjustable sound output makes it usable in noise-sensitive environments such as hotel lobbies, spas, or venues with open-plan reception areas

Installation is straightforward for a qualified electrician. The slim profile suits washrooms where wall space is limited, and the unit can be positioned at a height that works for the user profile of the venue. It operates on a standard mains supply, though the installation point should be planned to keep cabling neat and the unit accessible for filter maintenance.

The BulletDri Plus BDBL03 is well suited to hotels, spas, leisure venues, and any commercial site where washroom presentation and hygiene standards matter. For very high-volume public facilities where near-continuous use is expected, it is worth discussing whether a more heavy-duty unit would offer a better long-term return.

If you are specifying hand dryers across multiple washrooms or want to confirm this model is the right fit for your site, the team is happy to talk it through.

The Dryflow BulletDri Plus BDBL02 is a wall-mounted hand dryer designed for high-traffic commercial washrooms. It combines a high-speed motor with a HEPA filtration system that removes 99% of airborne bacteria before air reaches the user's hands — a meaningful consideration in hospitality, healthcare, and food-service environments where hygiene standards are closely observed. The brushed satin stainless steel housing gives it a finish appropriate for front-of-house washrooms as well as back-of-house staff facilities.

In practice, the unit dries hands in the region of 10 to 12 seconds, which keeps throughput moving during peak service periods without creating queues. The two airflow settings allow operators to choose between a warm-air mode and a more economical cool-air mode, useful where running costs are a factor or where noise is a consideration. A blue LED guide helps users position their hands correctly from the outset, which also reduces dripping on the floor around the unit.

A few practical points worth noting for operators:

• Slim 100mm depth suits tight washroom layouts without compromising the motor or filter housing
• Switchable heater element allows warm or eco cool-air operation depending on preference
• Front-mounted dial allows sound output to be adjusted — useful in schools, healthcare settings, or quieter hospitality environments
• HEPA filtration rated to remove 99% of bacteria from the airflow
• Rated for 300-plus uses per day, suited to sustained high-volume washroom traffic

Installation requires a standard mains electrical connection. The unit carries IP23 ingress protection, which covers it for typical washroom splash environments, though it is not rated for wet-room or outdoor use. Wall fixings and surface type should be considered at the installation stage, particularly in tiled or stud-partition walls.

The BulletDri Plus is well suited to hotels, restaurants, staff canteens, schools, and healthcare facilities where a hygienic, presentable, and reliable hand dryer is needed without the bulk of a larger blade-style unit. For sites with exceptionally high footfall or where faster cycle times are a priority, a higher-capacity unit may be worth considering.

If you are fitting out a new washroom or replacing existing units across a site, the team is happy to advise on the right specification for your volume and environment.

The Dryflow BulletDri Plus BDBL01 is a high-speed jet-style hand dryer with integral HEPA filtration, designed for busy commercial and public washrooms where throughput, hygiene, and reliability all matter. It operates at a 100mm depth, making it one of the slimmer units available in this category — a practical consideration where wall space or circulation around basins is limited.

In high-traffic environments, dry time consistency is important. The BDBL01 delivers a 10–12 second dry cycle driven by a brushless motor rated for extended continuous use, which means it holds up well under the kind of repeated demand you'd expect in a stadium, transport hub, hotel, or busy restaurant. The brushless motor design also reduces the maintenance burden compared with brushed alternatives — there are no carbon brushes to wear and replace over time.

From an operational standpoint, the unit offers a few considered features:

• HEPA filtration captures airborne bacteria before the airflow reaches users' hands, supporting washroom hygiene standards
• Selectable heater element allows operators to balance user comfort against energy consumption depending on the season or site preference
• Two airflow settings give flexibility between faster drying and quieter, lower-energy operation
• A guiding blue LED helps users position their hands correctly, which reduces incomplete drying and keeps the flow moving
• Vandal-resistant stainless steel cover and IP23 protection make it appropriate for less supervised public areas

Installation is straightforward for a qualified electrician — the unit is mains-powered and wall-mounted. The IP23 rating means it is suitable for washroom environments but is not rated for areas where it may be subject to direct water spray or outdoor exposure. At 100mm projection from the wall, it is well suited to tighter washroom layouts, though you should confirm wall construction can take the fixing load before specifying it in a refurbishment.

The BDBL01 is a solid choice for hospitality venues, leisure facilities, and any site where a reliable, hygienic, fast-drying unit is needed without excessive bulk. For very high-volume sites processing several hundred users per hour, it is worth considering whether a higher-capacity model with a greater continuous-use rating would be more appropriate. Equally, for smaller, lower-traffic facilities, a more basic unit may represent better value.

If you are specifying hand dryers across multiple washrooms or want to confirm suitability for a particular site, the team is happy to help you work through the options.

The Dryflow Slimforce DFLIF04 is a wall-mounted electric hand dryer designed for washrooms where space is limited but a clean, professional finish is still expected. Its narrow profile — just 10cm deep — keeps it well clear of walkways and tight corridors, while the high-velocity airflow dries hands quickly without the bulk of a conventional unit. The stainless steel casing and anti-vandal fixings give it the kind of build quality that holds up in commercial environments without requiring constant attention.

In practical use, the Slimforce suits lower-traffic washrooms well — think hotel corridors, office facilities, staff welfare areas, or front-of-house toilets in smaller hospitality venues. The internal switch allows operators to choose between a standard warm-air setting for guest comfort or an eco mode drawing just 0.6kW, which is worth considering anywhere energy consumption is being managed. At higher footfall levels, operators should assess whether a higher-capacity unit would better match demand.

Key operational points worth noting:

• Slim 10cm depth keeps the unit unobtrusive in narrow washrooms
• Dual airflow settings allow a balance between comfort and energy saving
• Stainless steel one-piece cover resists damage and is straightforward to wipe down
• Integrated filter helps maintain cleaner air delivery over time
• Anti-vandal fixings reduce tampering risk in semi-public areas

Installation requires a standard mains electrical connection and a suitable wall surface to carry the unit's weight. The IP23 rating provides protection against dust and light moisture, making it appropriate for typical washroom conditions, though it is not rated for wet-room or high-humidity environments. Wiring should be carried out by a qualified electrician in line with current UK regulations.

The DFLIF04 is best suited to sites with moderate daily footfall where energy efficiency and a tidy installation matter. For busier venues — high-volume restaurant washrooms or large leisure facilities — a higher-capacity model with faster throughput may serve better. If you are unsure which specification matches your washroom layout or expected usage, the team is happy to talk it through.

The Dryflow Jet Force Pro JF1G is a wall-mounted jet-style hand dryer designed for commercial washrooms that see consistent, heavy footfall. It delivers a rapid dry cycle supported by a brushless motor running at 20,000 RPM, which draws less energy per rotation than conventional brush motors and is built to sustain a longer service life with reduced mechanical wear. A built-in HEPA filter purifies incoming air before it contacts the user's hands, making it a practical choice wherever hygiene standards are a priority — including healthcare, hospitality, and food-service environments.

In high-traffic settings, a hand dryer needs to perform reliably across hundreds of daily cycles without staff intervention. The JF1G is rated for over 300 activations per day and incorporates a concealed 1000ml water collection tray that captures drip-off from wet hands, reducing the floor hygiene burden during busy service periods. A blue guidance light helps users position their hands accurately, which improves drying efficiency and reduces the likelihood of residual moisture being carried into adjacent areas.

From an operational standpoint, the unit offers several practical advantages:

• HEPA filtration removes 99.99% of bacteria from the air supply
• Self-regulating heater only activates when ambient temperature requires it, keeping running costs in check
• IPX4-rated housing is suitable for washrooms with water splash risk
• Impact and flame-resistant ABS shell with antimicrobial coating supports durability and hygiene
• Clear error-code diagnostics simplify fault identification for maintenance teams

Installation is straightforward — the unit is wall-mounted and hardwired. It is worth confirming your electrical supply and available wall space before fitting, particularly in smaller facilities where positioning relative to sinks and traffic flow will affect usability. The IPX4 rating makes it appropriate for wet-area installation, but it is not rated for outdoor or exposed environments.

The JF1G is well suited to mid-to-high-traffic commercial washrooms in hotels, restaurants, leisure facilities, and similar venues. For very high-volume sites — large event spaces or transport hubs, for example — it is worth considering whether a heavier-duty unit with greater throughput capacity would be more appropriate. Equally, lower-footfall settings may not require the full specification this model offers.

If you are unsure whether the JF1G is the right fit for your washroom layout or usage level, our team is happy to talk it through with you.

The Dryflow Jet Force Plus JFPL07 is a wall-mounted jet hand dryer designed for medium-traffic commercial washrooms. It uses a high-speed motor to direct a concentrated blade of air across the hands, guided by a blue positioning light to help users target moisture effectively. A built-in HEPA filter captures 99% of airborne bacteria before the air reaches hands, making it a practical choice where hygiene standards need to be demonstrably maintained — hotels, restaurants, and healthcare-adjacent facilities in particular.

In day-to-day use, the dryer handles up to 300 cycles per day without issue, which comfortably covers the throughput of a busy restaurant or hotel washroom during peak service. The drying process completes in around 10 to 12 seconds, which keeps queues moving and reduces the temptation for users to wipe hands on clothing or paper. Any water displaced from hands is channelled into an 800ml collection tray rather than pooling on the floor — a straightforward but genuinely useful feature that reduces slip risk and lightens housekeeping workload.

From an operational standpoint, the key practical advantages include:

• HEPA filtration providing cleaner airflow for hygiene-sensitive environments
• Integrated water collection tray reducing floor wetness and slip hazard
• Switchable hot and cool modes with automatic temperature control to limit unnecessary energy draw
• Antimicrobial ABS casing and IPX4 splash rating supporting durability in washroom conditions
• Blue positioning light improving drying accuracy and reducing average cycle time

Installation is straightforward — the unit is mains-powered and wall-mounted, requiring a standard electrical connection. IPX4 splash resistance means it can be sited near basins without concern, though it is not rated for wet-room or outdoor installation. The unit is suited to medium-traffic sites; for washrooms serving very high footfall continuously throughout the day, a higher-capacity model may be worth considering.

This dryer is well suited to hotel washrooms, restaurant and café facilities, leisure centres, schools, and similar settings where a reliable, hygienic hand-drying solution is needed without the complexity or cost of a premium commercial unit. It sits in a practical mid-range position — capable enough for consistent daily use, straightforward to maintain, and honest about its medium-traffic rating.

If you are unsure whether this model is the right fit for your footfall levels or washroom layout, the team is happy to talk it through before you commit.

The Dryflow SteelForce SFSS02 is a hands-in blade-style hand dryer built for washrooms that see continuous, heavy footfall. Rather than directing air onto hands from above, the hands-in design channels a high-velocity airflow around both sides of the hands as they are lowered into the unit, containing water droplets within the cavity and keeping the surrounding wall and floor area dry. The stainless steel housing is constructed from 1.2mm-gauge sheet, which gives it the rigidity to withstand the kind of incidental knocks and contact that occur in busy public washrooms over years of use.

In operational terms, the SFSS02 is rated for in excess of 300 activations per day, which makes it a practical choice for venues where peak periods are sustained — hotel conference facilities, stadium concourses, and airport lounges among them. The brushless motor runs at 21,000 RPM and contributes to a dry time in the 10–12 second range, keeping throughput moving during busy service windows. Because brushless motors have fewer wearing components than brushed alternatives, maintenance demands over the unit's service life are reduced. A blue guidance light assists users in positioning their hands correctly, which in practice reduces incomplete drying and the splash associated with poor hand placement.

The integrated HEPA filtration system filters intake air before it contacts the user's hands, removing a high proportion of airborne bacteria. This is a meaningful consideration in food-service and hospitality environments where hand hygiene standards are scrutinised, and it supports compliance with washroom hygiene policies without additional consumables. The IPX4 water-resistance rating confirms the unit is suitable for installation in wet washroom environments.

• Hands-in blade design contains water droplets within the unit
• HEPA filtration supports strong hand hygiene standards
• Stainless steel shell resists damage in high-traffic areas
• Rated for high daily activation volumes without performance loss
• IPX4 rating confirms suitability for wet washroom installation

Installation requires a mains electrical connection; the unit should be positioned at a comfortable working height on a solid wall capable of supporting it. Recess-mounting is not a standard option for this model, so surface area around the unit should be accounted for in washroom planning. The SFSS02 is well suited to hotels, stadiums, airports, and similar hospitality or leisure venues with continuous washroom demand. For smaller or lower-traffic washrooms, a lower-capacity model may be the more appropriate and cost-effective choice.

If you are specifying hand dryers across multiple washroom locations or want to confirm the SFSS02 is the right fit for your footfall levels and installation conditions, the team is happy to talk it through with you.

The Dryflow G-Force MKII is a touch-free, high-speed hand dryer designed for continuous use in commercial and hospitality environments. Built into a brushed satin stainless steel casing, it combines a robust, vandal-resistant construction with a finish that suits professional washroom settings — from hotel lobbies and leisure facilities through to staff welfare areas in busy kitchens and food service operations.

In practice, the G-Force MKII handles sustained throughput well. The adjustable power output means operators can balance drying speed against noise levels depending on the environment — a useful option where quieter operation is a priority, such as in hotel or spa settings, without sacrificing practicality during peak washroom use.

A HEPA filter is fitted as standard, which traps airborne particles before air is delivered to the user's hands. This is a meaningful feature in food service and hospitality environments where hygiene standards are closely scrutinised. Other practical advantages worth noting include:

• Touch-free operation reduces cross-contamination risk at the handwashing point
• Adjustable energy and noise settings allow the unit to be tuned to its environment
• Plug-in wall attachment system allows straightforward removal for cleaning or servicing without calling in an electrician
• Vandal-resistant stainless steel casing holds up well in high-traffic or unsupervised washrooms
• Brushed satin finish is practical to wipe down and presents well in customer-facing areas

Installation is straightforward. The plug-in attachment system means the unit can be wall-mounted and detached without specialist disconnection work, which keeps ongoing maintenance access simple. Standard electrical connection is required; siting near an appropriate supply point is the main installation consideration. The unit is wall-mounted, so floor space is not a factor, though ceiling height and the working height of users should inform positioning.

The G-Force MKII is well suited to hotels, restaurants, leisure venues, and staff washrooms in commercial kitchens where a reliable, hygienic hand dryer is needed and presentation matters. For very high-volume public facilities with near-constant footfall, it is worth considering whether a higher-capacity model would better meet demand. Equally, for a small back-of-house staff toilet, a simpler unit may be sufficient.

If you are specifying washroom equipment across a site or want to talk through which model fits your footfall and environment, the team is happy to help.

The Dryflow EcoWave is a wall-mounted, touch-free hand dryer designed for commercial and hospitality washrooms. It uses a wide-bladed air outlet to direct airflow across both hands simultaneously, removing moisture quickly without the noise levels associated with older high-speed dryers. The HEPA filtration means that the air being expelled has been filtered before it reaches the user's hands, which is a relevant consideration in food service and healthcare-adjacent environments where hygiene standards are closely scrutinised.

In practical terms, the EcoWave is well suited to moderate-traffic washrooms — the kind found in restaurants, cafés, bars, hotels, and similar hospitality venues. It handles steady footfall comfortably during service periods. For very high-volume sites such as large event venues or busy transport catering operations, a higher-capacity unit may be worth considering, but for most standard hospitality washroom layouts this dryer performs reliably without drawing excessive attention to itself in terms of noise or energy draw.

The key operational advantages worth noting:

• Touch-free sensor activation reduces cross-contamination risk in food service washrooms
• HEPA-filtered airflow supports hygiene compliance in catering environments
• Low operating wattage keeps running costs down compared to older dryer technology
• Slim wall profile suits compact or narrow washroom layouts
• Brushed satin stainless-steel finish holds up well against surface marking and minor wear

Installation is straightforward — the unit is wall-mounted and requires a standard mains electrical connection. Its shallow depth makes it practical in tighter spaces where a bulkier unit would obstruct movement or conflict with adjacent fixtures. No specialist ventilation is required.

The EcoWave is a sensible, low-maintenance choice for hospitality operators who want reliable, hygienic hand drying without high running costs or an intrusive installation footprint. If you're fitting out multiple washrooms or want to confirm suitability for a specific site layout, the team is happy to talk it through with you.

The Dryflow JetDri Mark II is a wall-mounted electric hand dryer designed for commercial and hospitality washrooms. It operates at 1.8kW and offers two selectable airflow modes — a warm setting for user comfort and an eco setting that reduces energy consumption during quieter periods. The polished chrome finish suits washrooms where appearance matters alongside function.

In practical use, the unit handles low to moderate footfall reliably. It is rated for environments seeing up to around 100 uses per day, making it a sensible fit for smaller cafés, guest houses, offices, and similar settings where the washroom sees steady but not heavy traffic. The high-speed motor delivers a fast dry time, keeping queues moving during short peak periods without excessive noise levels.

From an operational standpoint, the JetDri Mark II offers a few practical advantages worth noting:

• Two airflow modes allow facilities teams to balance comfort against running costs depending on the time of day or season
• IP23 protection makes it suitable for washroom environments where some moisture exposure is unavoidable
• Anti-vandal fixings reduce the risk of tampering in less supervised areas
• The stainless steel shell is straightforward to wipe down and maintain

Installation requires a standard mains electrical connection. The unit is surface-mounted to the wall, so fixings into the wall substrate need to be appropriate for the surface type. IP23 protection means it is splash-resistant but not suitable for direct water exposure, so positioning relative to sinks and splashback areas is worth considering before fitting.

This model is best suited to lower-traffic washrooms in hospitality, small food service operations, or office environments. For sites with significantly higher footfall or washrooms under continuous pressure during service, a higher-capacity unit with a greater duty rating would be a more appropriate choice.

If you are unsure whether this model suits your washroom layout or usage levels, we are happy to talk it through.

The Dryflow JetDri Mark II is a wall-mounted commercial hand dryer finished in brushed satin stainless steel. It operates across a variable power range, allowing the heat output to be adjusted depending on the season or the preference of the site — a built-in heater switch lets operators run the unit warm in colder months and switch to a cooler, lower-energy mode during warmer periods. It is a straightforward, dependable unit without unnecessary complexity.

In commercial washroom environments, the JetDri Mark II holds up well to consistent daily use. The stainless steel casing is robust and resists surface damage in high-traffic areas, and the anti-vandal fixings make it a practical choice for publicly accessible facilities where durability and security matter. It is commonly found in staff washrooms, hospitality venues, and similar settings where a reliable, low-maintenance solution is needed.

From an operational standpoint, the key practical advantages are:

• Adjustable power output reduces energy consumption when full heat is not required
• Stainless steel finish is easy to wipe down and maintains appearance over time
• Anti-vandal fixings provide additional security in public-facing installations
• No consumables — eliminates the ongoing cost and waste of paper towel dispensers
• Five-year parts and labour warranty gives reasonable long-term assurance

Installation requires a standard mains electrical connection and a suitable wall surface capable of supporting the unit. At 4.6kg it is light enough for a straightforward single-person installation, though electrical work should always be carried out by a qualified electrician. The unit suits most standard washroom wall configurations, but it is worth checking available wall space and proximity to sockets before ordering.

The JetDri Mark II is well suited to small-to-medium commercial venues — hotels, cafés, restaurants, leisure facilities, and office premises — where a cost-effective, presentable hand dryer is needed without the operational overhead of paper towel systems. For very high-footfall sites such as large event venues or busy transport facilities, a higher-capacity model with faster cycle times may be worth considering.

If you are unsure whether this model is the right fit for your site or want to talk through your washroom setup, we are happy to help.

The Dryflow JetDri Mark II is a wall-mounted commercial hand dryer finished in black stainless steel. It operates across a variable power range, allowing the output to be adjusted between a lower energy-saving mode and a higher-power setting for faster drying — a practical balance between running cost and performance depending on the season or footfall level. An internal heater switch gives operators the option of warm air when conditions demand it, or cooler airflow during warmer periods to reduce energy consumption.

In a busy washroom environment — whether in a pub, hotel, restaurant, or leisure facility — hand dryers take considerable punishment. The JetDri Mark II is constructed from thick stainless steel and fixed with anti-vandal screws, which makes it a sensible choice for public-facing or high-traffic locations where durability and resistance to interference matter. The black finish suits venues where aesthetics are a consideration alongside function.

From an operational standpoint, the key practical advantages are straightforward:

• Adjustable power output helps manage running costs across different seasons
• Anti-vandal fixings reduce maintenance and replacement risk in public areas
• Stainless steel construction is durable and easy to wipe down
• Eliminates the ongoing cost and waste associated with paper towels
• Compact wall-mount footprint suits washrooms where space is limited

Installation requires a suitable mains electrical connection and wall fixings appropriate for the substrate. At 4.6kg the unit is straightforward to mount, though it is worth confirming wall construction before installation, particularly in older or partitioned buildings. No plumbing or ventilation work is required.

The JetDri Mark II is well suited to small and mid-sized hospitality and catering venues — pubs, cafés, restaurants, and hotels — where a reliable, no-fuss hand dryer is needed without the cost of a high-speed jet model. For very high-footfall sites such as large event venues or busy motorway services, a higher-capacity unit may be worth considering.

If you're unsure which hand dryer specification fits your washroom layout or usage level, the team is happy to talk it through before you order.

The Dryflow JetDri Mark II is a wall-mounted electric hand dryer finished in white, built for commercial washrooms in hospitality, leisure, and food service environments. It is designed as a practical, low-running-cost alternative to paper towel dispensers, with adjustable power output to balance drying speed against energy consumption depending on the time of year and footfall demands.

In day-to-day use, the dryer handles steady washroom traffic reliably without the maintenance overhead of paper towel restocking. An internal heater switch allows operators to introduce warm air during colder months for a more comfortable experience, and switching to a lower power setting in warmer weather helps manage running costs without sacrificing usable performance. The stainless steel construction holds up well in environments where wall-mounted fixtures take knocks, and anti-vandal fixings are included as standard — a sensible feature in publicly accessible or high-footfall washrooms.

• Adjustable power output allows running cost control across seasons
• Internal heater switch provides warm air drying in colder conditions
• Stainless steel casing resists surface damage in busy environments
• Anti-vandal screw fixings reduce tampering risk in public washrooms
• Eliminates paper towel waste, lowering ongoing consumable costs

Installation is straightforward — the unit is wall-mounted and connects to a standard mains supply. It is worth confirming the wall surface and fixings are appropriate for the weight of the unit before installation, and ensuring adequate clearance around the dryer for comfortable use. The compact footprint makes it suitable for smaller washroom layouts where space is limited.

The JetDri Mark II is well suited to smaller hospitality venues, hotel washrooms, staff facilities, and light-to-medium footfall public washrooms. For very high-volume sites such as large event spaces or busy pub washrooms, a higher-capacity model with faster cycle times may be worth considering.

If you are unsure whether this model suits your site layout or expected throughput, we are happy to talk it through before you order.

The Dryflow Slimforce is a wall-mounted automatic hand dryer finished in brushed satin stainless steel. Its notably shallow profile makes it a practical choice for washrooms where wall space or projection depth is restricted, such as compact cloakrooms in restaurants, hotel corridors, or bar washrooms where footfall is steady but the room itself is small.

In day-to-day use, the Slimforce delivers a concentrated airflow that dries hands quickly without requiring the kind of power draw associated with older high-wattage models. It can operate at reduced power, which is useful for operators looking to manage energy consumption across a busy site with multiple units running throughout service. The stainless steel housing is well suited to commercial washroom environments where durability and ease of wiping down are priorities.

Practical advantages for operators include:

• Shallow projection suits tight washroom layouts without compromising accessibility
• Vandal-resistant fixing reduces maintenance call-outs in public-facing sites
• One-piece weld-free cover keeps cleaning straightforward between services
• Adjustable power settings allow energy use to be matched to demand
• Brushed satin finish holds up well in daily commercial use

Installation is straightforward — the unit is wall-mounted and connects to a standard mains supply. It is light enough for a single installer to handle comfortably. No specialist ventilation or drainage is required. The shallow depth means it can be positioned in locations where a bulkier dryer simply would not fit, though it is worth checking projection clearance against any accessibility requirements relevant to your site.

The Slimforce is well suited to small to medium washrooms in hospitality and foodservice settings — restaurants, cafés, hotels, and licensed premises. For higher-volume sites such as large event venues or busy motorway services where multiple units run continuously under heavy demand, a higher-capacity model may be worth considering.

If you are unsure whether this unit is the right fit for your washroom layout or usage levels, we are happy to talk it through.

The Dryflow Infinity is a wall-mounted high-speed hand dryer designed for commercial washrooms that see consistent, heavy footfall. It uses a curved airflow drying system paired with a brushless motor to deliver fast drying without the noise levels associated with older high-speed units. Power output is adjustable between standard and heated drying modes, which allows operators to balance drying speed against energy consumption depending on the time of day or volume of use.

In busy service environments — staff canteens, contract catering facilities, food production sites — hand dryer reliability and hygiene performance matter as much as speed. The Infinity includes a HEPA filter rated to capture a high proportion of airborne bacteria, which is a meaningful consideration in food-adjacent washrooms where hygiene standards are scrutinised. The brushless motor is maintenance-free in normal operation, which reduces the servicing burden over time.

Key practical advantages include:

• Adjustable power output to manage energy use during quieter periods
• HEPA filtration supporting hygiene compliance in food-sector washrooms
• Brushless motor requiring no routine maintenance
• Connect+ plug-in system for straightforward installation and servicing access
• Brushed satin finish in stainless steel and ABS, suitable for commercial washroom aesthetics

Installation is straightforward — the Connect+ system is designed to simplify both fitting and any future servicing. At 3.5kg, the unit is light enough for a single person to handle during installation, though wall fixings should be appropriate for the substrate. It is mains-powered with a variable wattage range, so it is worth confirming your electrical supply is compatible before ordering.

The Infinity is well suited to medium- to high-footfall commercial washrooms, including those in hospitality venues, workplace canteens, and food production facilities where hygiene standards are a priority. For very high-volume sites with near-continuous use, it is worth discussing whether a heavier-duty unit would better suit the demand.

If you are unsure whether this model is the right fit for your site, our team is happy to talk it through with you.