Grill Accessories

This is a genuine Buffalo replacement cooking grid, supplied as a direct spare part for the Buffalo folding gas BBQ (model JA377). It is a like-for-like replacement designed to restore the cooking surface when the original grid has worn, warped, or corroded through regular use.

Keeping a spare grid on hand is a practical measure for any operator running outdoor or occasional BBQ service. Swapping the grid rather than replacing the whole unit keeps the BBQ in service with minimal downtime, which matters when the product is part of a seasonal or event-driven menu.

If you are unsure whether this grid fits your specific unit, or if you are looking at replacement parts for a different Buffalo BBQ model, it is worth checking with the team before ordering to avoid an unnecessary return.

This is the manufacturer-supplied replacement fire bowl for the Buffalo DR826 charcoal grill. If you need further guidance on compatibility or fitting, our team is happy to help before you order.

These are genuine Buffalo replacement cook plate liners designed specifically for the Buffalo JD457 high-speed convection oven. They sit directly on the cook plates to provide a non-stick cooking surface, helping food release cleanly and reducing the build-up of baked-on residue that would otherwise accumulate on the plates themselves.

In a busy service environment, the difference between a protected cook plate and an unprotected one shows quickly. Liners take the direct contact from food oils, marinades, and melted fats, meaning the plates underneath stay cleaner for longer and are less prone to degradation over time. Food lifts more reliably during service, which matters when speed and presentation are both under pressure.

• Reduces food sticking and aids clean release during service
• Protects the cook plate surface from grease and residue build-up
• Reusable and quick to remove between services
• Speeds up end-of-service clean-down by reducing soaking and scraping
• Genuine Buffalo accessory — precise fit for the JD457

Because these are sized precisely for the JD457, fitting is straightforward and there is no trimming or adjustment required. They can be removed, cleaned, and replaced quickly, keeping downtime between services to a minimum.

These liners are a practical consumable for any site running a JD457 oven regularly. If you are unsure whether these are the right fit for your machine or have questions about maintaining your oven's cook plates more broadly, our team is happy to point you in the right direction.

This floor stand is purpose-built to support the Buffalo 600mm countertop chargrill, raising it from a worktop or floor position to a comfortable and safe working height. It is a straightforward, functional piece of kit — stainless steel construction, designed to be stable under a piece of equipment that sees continuous heat and heavy daily use.

In a busy kitchen environment, having the chargrill at the correct working height matters more than it might seem. An incorrectly positioned grill slows down plating, increases fatigue during a long service, and can create awkward working angles that affect both safety and output. This stand resolves that by bringing the unit up to counter height, integrating it cleanly into the cook line without requiring a bespoke fabricated solution.

Practically, the stainless steel build means it is resistant to grease, heat, and the kind of heavy-handed cleaning that commercial kitchens require. It is straightforward to wipe down and does not trap debris in complex joints or surfaces.

• Raises the chargrill to a practical, ergonomic working height
• Stainless steel construction — durable and easy to clean
• Stable base suited to continuous service use
• Removes the need for custom fabrication or worktop modification
• Compatible with the Buffalo 600mm countertop gas chargrill and Buffalo 600mm natural gas griddle

This stand is suited to operations where the Buffalo 600mm chargrill is being used as a floor-standing unit rather than a countertop appliance — smaller kitchens, pop-up setups, or sites where worktop space is at a premium. It is a dedicated accessory, not a universal stand, so compatibility with your specific Buffalo unit should be confirmed before ordering.

If you are unsure whether this stand suits your kitchen layout or equipment configuration, we are happy to talk it through.

This is a genuine Buffalo replacement tray support designed specifically for the Buffalo HX569 charcoal oven. Tray supports are a working component of any charcoal oven — they hold the cooking tray or grill at the correct height during service, and like any part subject to high heat and repeated loading, they can wear or become damaged over time.

Replacing a worn or damaged tray support promptly is important for safe and consistent operation. A correctly seated tray ensures even heat distribution and prevents trays from shifting during busy service, which can affect cooking results and create a safety risk.

This is a like-for-like replacement part. It is designed to fit the HX569 model only — if you are unsure whether this is the correct part for your unit, or if you have an older or variant model, it is worth checking before ordering to avoid a return.

If you would like to confirm compatibility or have any questions about maintaining your Buffalo charcoal oven, the team is happy to help.

This is the replacement waste oil container for the Buffalo 600 Series Electric Griddle range. It sits beneath the griddle plate and collects grease and cooking residue during service, keeping the cooking surface clear and making end-of-service cleaning more straightforward. It is a direct replacement part rather than a piece of primary cooking equipment.

Compatible models include the 3kW Griddle 400mm (CU473), the 3kW Ribbed Griddle 400mm (CU474), and the Dual Zone Griddle 600mm Three Phase (CU475). If you are unsure which container fits your unit, it is worth checking the model number on your griddle before ordering, as oil container designs can vary between series.

Keeping a spare container on hand is a sensible precaution in a busy kitchen. A cracked or missing container is a hygiene and safety concern, and having a replacement available means a damaged part can be swapped out without disrupting service or leaving the griddle out of action.

If you are unsure whether this is the correct part for your griddle, or if your unit is from a different Buffalo series, feel free to get in touch and we can help confirm compatibility before you order.

This floor stand is purpose-built to support the Buffalo 900mm countertop gas chargrill and the Buffalo 900mm natural gas griddle, raising either unit from a countertop position to a practical standing working height. It is a straightforward, functional piece of equipment — its job is to give the chargrill a stable, dedicated base on the kitchen floor rather than occupying valuable counter or pass space.

In a working kitchen, having the chargrill at the correct height makes a real difference during service. Operators can work at a natural stance for extended periods, which reduces fatigue and helps maintain consistent output across a shift. The stainless steel construction keeps cleaning straightforward and holds up well in the demanding environment of a commercial kitchen.

• Raises the chargrill to a comfortable standing working height
• Frees up counter space for other preparation or service tasks
• Stainless steel finish is easy to wipe down and resistant to kitchen conditions
• Provides a stable, dedicated base for the unit during service
• Compatible with Buffalo 900mm gas chargrill and 900mm natural gas griddle

Before purchasing, it is worth confirming that your kitchen floor space accommodates the combined footprint of the stand and chargrill together, and that there is sufficient clearance for ventilation and safe operation of the gas appliance above. This stand is designed specifically for the Buffalo 900mm range — it is not a universal fit for other brands or sizes.

This stand suits operators who have already chosen or are running a Buffalo 900mm chargrill and want a proper floor-mounted setup rather than a counter installation. If you are still deciding on the chargrill itself or are unsure about the right configuration for your kitchen layout, feel free to give the team a call — it is often worth a quick conversation before you commit.

These are genuine Buffalo replacement cook plate liners designed specifically for the Buffalo JD457 high speed convection oven. They sit directly on the cook plates to provide a non-stick surface that helps food release cleanly and protects the plates themselves from direct contact with food residue, grease, and debris during cooking cycles.

In a busy service environment, cook plate condition has a direct effect on food presentation and throughput. A liner that releases food cleanly reduces the need for intervention between covers, and the reusable non-stick surface means less scraping and soaking during clean-down. Over time, this helps extend the working life of the cook plates themselves, which are a more costly component to replace.

• Non-stick surface aids clean food release and protects plate condition
• Reusable design reduces consumable costs over time
• Slots in and out quickly to keep downtime to a minimum
• Simplifies clean-down at the end of service
• Genuine Buffalo parts engineered to fit the JD457 precisely

These liners are a straightforward fit for the JD457 and require no tools or adjustment. Being genuine Buffalo components, sizing and material specification are matched to the original equipment, which matters when fit and heat transfer performance need to be consistent.

They are suited to any operation running a JD457 high speed oven where cook plate maintenance and service efficiency are a priority — from hotels and staff restaurants to contract caterers and quick-service operations. If you are unsure whether these are the correct liners for your specific oven configuration, the team are happy to confirm compatibility before you order.

This is the genuine Buffalo replacement heatproof top tray designed specifically for the Buffalo CJ753 salamander grill. It fits directly in place of the original tray and restores the unit to its intended working condition without the need for fabricated workarounds or improvised alternatives.

In a busy kitchen environment, salamander components take considerable punishment from sustained radiant heat, grease, and daily cleaning. When the top tray becomes damaged, warped, or cracked, replacing it promptly with the correct OEM part ensures the unit continues to perform safely and consistently through service.

Using a genuine Buffalo part rather than a generic substitute means the tray will seat correctly, maintain the designed clearances from the heating elements, and handle the thermal demands the CJ753 places on it during normal operation. Incorrect or poorly fitting trays can create uneven heat distribution and, more importantly, a safety concern.

This tray is a direct like-for-like replacement and is suited to any operator running a CJ753 salamander who needs to return the unit to service quickly. It is worth confirming the serial number or manufacture date of your salamander with our team if you have any doubt about compatibility before ordering.

This is the manufacturer's replacement drip tray for the Buffalo CP240 combi BBQ and griddle unit. Its purpose is straightforward: to collect fat, cooking juices, and food debris that fall through the grill surface during service, keeping the unit cleaner and reducing the risk of flare-ups or residue build-up on the appliance base.

In a busy kitchen, drip trays take a considerable amount of heat and grease over the course of a service. Having a genuine replacement part to hand means you can swap out a damaged or heavily soiled tray quickly, keeping the unit in safe working order without downtime. A well-fitting tray also makes end-of-service cleaning more manageable, since the bulk of the debris is contained in one removable component rather than spread across the interior.

This tray is designed specifically for the Buffalo CP240, so it should seat correctly and perform as the original. Using a non-compatible or poorly fitting tray risks grease escaping into areas of the unit that are harder to clean and potentially affecting performance over time.

If you are unsure whether this is the correct part for your unit, or if your CP240 has an older or revised specification, it is worth checking with us before ordering — we can confirm compatibility and advise on availability of other consumable parts for the same appliance.

This is a genuine Buffalo replacement oil tray designed specifically for the Buffalo extra wide cast iron griddle (HT762). It sits beneath the griddle plate to collect rendered fat and grease as it runs off during cooking, keeping the work area cleaner and reducing the risk of grease build-up causing issues during a busy service.

In a working kitchen, oil trays take a reasonable amount of punishment — repeated heating and cooling cycles, constant grease exposure, and regular cleaning. Using a genuine manufacturer part rather than a generic substitute means the fitment is correct and the tray handles the conditions it was designed for without warping or poor drainage alignment.

Replacing a worn or damaged oil tray promptly is straightforward maintenance that helps protect the griddle itself. A deteriorated tray can lead to grease spilling onto burner components or the floor, creating both a hygiene problem and a slip hazard.

This tray is compatible with the HT762 Buffalo extra wide cast iron griddle. If you are unsure whether this part fits your specific Buffalo griddle model, it is worth checking with us before ordering — our team can confirm compatibility and advise if a different replacement part would be more appropriate.

This is a genuine Buffalo replacement crumb tray designed to fit the Buffalo 900mm and 600mm natural gas griddles. It sits beneath the cooking surface to collect food debris and grease droppings during service, keeping the interior of the unit clean and reducing the risk of grease build-up that can cause flare-ups or affect burner performance over time.

In a busy kitchen, crumb trays take a fair amount of daily punishment. Grease, food particles, and repeated removal for cleaning all add up, and over time the original tray can warp, corrode, or simply wear out. Replacing it with a genuine part ensures the correct fit and maintains the griddle's performance as intended.

A few practical points worth noting:

• Genuine Buffalo part — correct fit for JA870 (900mm) and JE095 (600mm)
• Supports routine cleaning and helps protect the burner assembly below
• Simple like-for-like replacement with no tools required
• Using a non-genuine tray risks an incorrect fit and potential safety issues

If you are unsure whether this tray fits your specific griddle model, or if you are seeing performance issues that suggest something beyond a worn tray, it is worth getting in touch before ordering — we are happy to help you identify the right part.

This is a genuine replacement cast iron pan support designed specifically for the Buffalo 700 Series gas range cooker (model JB963). Pan supports take considerable punishment in a working kitchen — repeated thermal cycling, heavy pots, spillage, and constant handling all take their toll. When a support becomes cracked, warped, or unstable, it creates a safety concern and disrupts the consistency of the cooking surface, so having a reliable replacement to hand is a practical consideration for any operator running Buffalo 700 Series equipment.

Cast iron pan supports are chosen for commercial range cookers because the material holds up well under sustained heat and the weight of large stockpots, sauté pans, and gastronorm vessels. A damaged or missing support affects pot stability directly, which matters during a busy service when speed and safety both count.

This part is a like-for-like replacement, so fitting it requires no modification. It restores the burner position to its original configuration and keeps the cooking surface operating as intended. Keeping a spare in stock is sensible for kitchens where the range runs consistently through lunch and dinner service.

This part is suited to any operation already running the Buffalo JB963 range cooker and needing to replace a worn or damaged pan support. If you are unsure whether this support is compatible with your specific unit, or if you have a different model within the Buffalo range, it is worth checking with the team before ordering.

This grilling rack is a replacement or additional accessory designed specifically for use with the Buffalo CD679 grill. It provides a stable, elevated cooking surface within the grill cavity, allowing food to be positioned correctly for consistent heat exposure and even cooking results.

In a commercial kitchen, having the right rack in place is a straightforward but important detail — the wrong fit can affect cooking performance, airflow within the grill, and safe handling during service. This rack is matched to the CD679 unit, so operators can be confident it will seat correctly and function as intended.

• Direct replacement for the Buffalo CD679 grill unit
• Provides correct positioning for consistent cooking results
• Maintains airflow and heat distribution within the grill cavity
• Supports efficient cleaning and maintenance routines
• Keeps the grill operating safely and to its original specification

If you are unsure whether this rack is compatible with your specific unit, or if you need advice on additional accessories for your grill setup, the team is happy to help clarify before you order.