Holmes Commercial Work Tables and Stations

This is a welded stainless steel wall-mounted work table from Vogue, built at 1800mm wide and fitted with a double overhead gantry. The construction is in 304 grade stainless steel throughout, giving a food-safe, non-porous prep surface combined with a gantry arrangement that adds usable overhead laydown or storage space without occupying additional floor area. An undershelf sits below the main work surface, providing a straightforward location for dry store items, trays, or equipment in regular use.

In a working kitchen this kind of table tends to earn its keep in prep runs and pass areas where worktop space is under constant pressure. The double gantry is particularly useful in high-throughput environments where having ingredients, containers, or small equipment immediately to hand at height keeps the main surface clear during service. The welded frame avoids the flex that can develop in bolted alternatives over time, which matters in busy kitchens where tables are regularly knocked, loaded, and cleaned down.

Practical advantages that operators tend to notice day to day:

• Double gantry provides overhead storage without reducing floor or counter space
• 304 stainless steel surface is straightforward to clean and resists corrosion in wet prep environments
• Undershelf makes use of otherwise wasted space beneath the table
• Fully adjustable feet allow levelling on uneven kitchen floors
• Welded construction maintains rigidity under heavy daily use

At 1800mm wide this table suits medium to larger kitchens where a full run of prep space is needed. Wall-fixing should be considered carefully — the table is designed to sit against a wall, so the installation location needs to support the load when the gantry is in use. At 26kg the unit is manageable to position during a fit-out, though a second pair of hands is advisable. It is worth confirming wall construction and fixing method before installation, particularly in older buildings.

This table is well suited to restaurant kitchens, hotel banqueting prep areas, school catering facilities, and similar environments where structured prep space and accessible storage are priorities. For very compact kitchens a shorter-width table in the same range may be a better fit, while larger central kitchen operations may benefit from a heavier-duty fabricated option with greater load capacity.

If you are fitting out a new kitchen or reconfiguring an existing one and want to talk through the layout before committing, our team is happy to help you work through the options.

This is a welded stainless steel wall work table with a double overhead gantry, designed to give kitchen teams a reliable, hygienic preparation surface with practical overhead storage built in. The 304-grade stainless steel construction covers the work surface, frame, undershelf, and gantry rails, making it a consistent and easy-to-clean unit throughout. The fully adjustable feet allow it to sit level on uneven kitchen floors, which is a common practical concern in older sites.

In a working kitchen, the double gantry is where this table earns its keep. It provides overhead laydown space for containers, utensils, or small equipment without encroaching on the work surface below — a genuinely useful arrangement during busy service periods when prep space is under pressure. The undershelf adds a second tier of storage lower down, helping to keep the surrounding area organised. The welded construction means there are no bolt joints at the main stress points, which holds up better under the repeated loading and daily cleaning that commercial use demands.

The practical advantages for kitchen operations include:

• Double gantry provides overhead storage without reducing prep surface area
• Welded frame construction for long-term structural reliability under daily use
• 304 stainless steel throughout supports thorough cleaning and food hygiene compliance
• Undershelf adds accessible storage for frequently used items
• Adjustable feet accommodate uneven floors common in commercial kitchens

At 1500mm wide, this table suits medium-sized preparation areas, from restaurant kitchens to contract catering units. It works well positioned against a wall, which the gantry arrangement is specifically suited to. For smaller kitchens with limited run of wall space, narrower alternatives may be more appropriate, and for larger high-volume operations a heavier-duty extended bench configuration may better fit the workflow.

If you are fitting out a kitchen and want to talk through how this sits within your broader prep layout, the team is happy to help work through what makes sense for your space.

This 1200mm wall work table from Vogue is a welded stainless steel preparation surface fitted with a double gantry overhead and a full-length undershelf below. It is designed to sit against a wall and provide a dedicated food preparation station with usable space above and below the main worktop — a practical arrangement in kitchens where every square metre counts.

In a working kitchen environment, the double gantry earns its place quickly. It gives chefs somewhere to rest dishes, hold mise en place containers, or keep small equipment within arm's reach without cluttering the worktop itself. The welded construction keeps the frame rigid under the kind of constant daily use that bolted frames can struggle with over time, and the 304-grade stainless steel surface is straightforward to clean down between tasks and at the end of service.

The practical benefits of this table centre on its layout rather than any single feature:

• Double gantry provides laydown and storage space above the main work surface
• Undershelf adds usable storage without increasing the table's footprint
• Welded frame avoids the loosening joints common in bolted alternatives
• Fully adjustable feet allow levelling on uneven kitchen floors
• 304 stainless steel resists corrosion and meets standard food safety requirements

At 1200mm wide, this table suits a single operator working a preparation section. It is a reasonable fit for small-to-medium kitchens, prep rooms, and back-of-house areas where a compact but fully specified station is needed. For larger teams or sites that need more continuous run length, wider or multi-section configurations would be worth considering instead.

Installation is straightforward — no utilities are required and the adjustable feet remove the need for any groundwork. The main consideration is overhead clearance for the gantry, so it is worth confirming the available wall height before ordering.

If you are fitting out a new prep area or replacing an existing table and want to make sure the layout will work for your team, we are happy to talk it through.

This is a welded stainless steel wall-mounted work table with a double overhead gantry, designed for food preparation areas in commercial kitchens. The double gantry provides two tiers of additional laydown or storage space above the work surface — useful for holding containers, utensils, or ingredients within easy reach during service without cluttering the prep area below. An undershelf provides further storage at a lower level, and fully adjustable feet allow the table to sit level on uneven kitchen floors.

Constructed from 304 grade stainless steel throughout, the table is built to handle the regular demands of a working kitchen. The welded construction means there are no bolted joints at the frame to work loose over time, and the smooth stainless surfaces resist moisture, grease, and the cleaning chemicals routinely used in commercial environments. At 18kg the unit is manageable to position during installation, though wall-fixing requirements should be assessed before ordering.

In practical terms, this table suits kitchens where worktop space is limited and vertical organisation matters. The double gantry is particularly useful in prep sections where staff need to keep frequently used items accessible without losing bench space. Key operational advantages include:

• Double overhead gantry keeps prep ingredients and utensils within arm's reach
• Undershelf adds usable storage without increasing the table's footprint
• Welded frame reduces long-term maintenance compared to bolted alternatives
• 304 stainless steel surfaces are straightforward to clean to food hygiene standards
• Adjustable feet accommodate minor floor-level variation common in older kitchen premises

This table is best suited to smaller or medium-sized kitchens — particularly prep sections, pastry areas, or back-of-house stations where wall space is available and vertical storage adds genuine value. Sites with higher-throughput requirements or larger prep teams may find a longer or heavier-duty table a better fit for the workload.

If you are unsure whether this table works for your layout or how it fits alongside your existing equipment, we are happy to talk it through before you commit to an order.

This 1800mm wall-mounted preparation table is a welded stainless steel unit built for regular, heavy use in commercial kitchen environments. The double gantry above the work surface provides additional laydown space without encroaching on the main prep area below — a practical arrangement for kitchens where worktop space is at a premium. The undershelf adds a further tier of storage, helping to keep the immediate work area clear during a busy service.

The welded construction keeps the unit rigid under sustained use, which matters when the table is in constant circulation across a prep or larder section. The 304 stainless steel surface is straightforward to clean down between tasks, and the adjustable feet allow the table to sit level on uneven kitchen floors — a common requirement in older or refurbished premises.

In practical terms, this table works well as a dedicated prep station along a wall run, offering operators a clear working surface alongside accessible overhead and underfoot storage. Key operational advantages include:

• Double gantry provides overhead storage without sacrificing prep surface area
• Welded frame resists racking and flex during heavy preparation work
• Undershelf keeps frequently used equipment within reach but off the worktop
• Adjustable feet accommodate uneven floors common in commercial premises
• Smooth stainless steel surfaces support quick, thorough cleaning between tasks

At 1800mm wide, this is a substantial table that suits mid-sized to larger kitchens with defined prep zones. In tighter kitchens or sections with limited wall runs, a narrower unit may be a more practical fit. For very high-throughput operations requiring additional structural robustness or bespoke sizing, heavier-duty alternatives are available.

If you are fitting out a new section or replacing existing prep furniture and would like to talk through the layout before ordering, the team is happy to help you work through the options.

This is a welded stainless steel wall preparation table with a double overhead gantry, designed for use in professional catering kitchens. The work surface provides a hygienic, food-safe preparation area at a standard working height, supported on a sturdy stainless steel frame. The double gantry sits above the worktop and provides two additional horizontal shelf areas, useful for holding containers, equipment, or ingredients within easy reach during service without encroaching on the main prep surface.

In a busy kitchen environment, the value of a well-organised prep station becomes clear quickly. The double gantry helps operators keep frequently used items accessible overhead, which reduces unnecessary movement across the kitchen during service. The undershelving adds a further storage tier, making the most of the footprint in kitchens where space is at a premium. The welded construction means the table holds up well under the daily stresses of a working kitchen — there are no bolted joints to loosen over time.

• Welded 304 stainless steel construction throughout for durability and hygiene
• Double overhead gantry provides two tiers of accessible above-worktop storage
• Fixed undershelving adds ground-level storage within the table footprint
• Fully adjustable feet to level the table on uneven kitchen floors
• Wall-mounting configuration helps optimise workflow along a kitchen run

As a wall table, this unit is intended to be positioned against a wall or along a kitchen perimeter rather than used as a freestanding island. The 1500mm width suits a single dedicated prep station or a section of a larger kitchen run. It is worth confirming the available wall clearance for the gantry uprights before installation, and ensuring the floor loading is suitable given the additional weight of equipment placed on the gantry tiers during service.

This table suits small to medium commercial kitchens — restaurants, cafés, school kitchens, and similar operations — where a defined prep zone with overhead organisation is useful. For larger, higher-throughput sites requiring wider worktops or more substantial fabrication, heavier-duty options are available within the range.

If you are planning a kitchen layout and want to talk through how this table fits into your prep workflow, the team is happy to help before you commit to an order.

This is a welded stainless steel wall-mounted preparation table with a double overhead gantry, designed to provide a clean, hygienic work surface alongside additional laydown or storage space at height. The 304-grade stainless steel construction throughout makes it well suited to food preparation environments where hygiene standards and durability under daily use are non-negotiable.

In a working kitchen, the double gantry earns its keep quickly. Operators can use the upper levels to keep frequently needed items off the prep surface itself — condiments, small equipment, ticket rails, or mise en place containers — without losing bench space. The undershelf adds a further tier of storage, which in tighter kitchens helps keep the floor area clear and workflows tidier during a busy service.

The practical advantages of this table reflect how it is built rather than how it looks:

• Fully welded frame resists racking and movement under daily load
• 304 stainless steel surfaces are easy to clean and hold up to chemical sanitisers
• Double gantry keeps the prep surface clear during service
• Adjustable feet allow levelling on uneven kitchen floors
• Undershelf adds usable storage without increasing the footprint

At 1200mm wide, this table suits a dedicated prep station in a small to medium kitchen, or forms part of a run of preparation surfaces in a larger operation. It is designed to sit against a wall rather than act as a central island, so the available run of wall space should be confirmed before ordering. At 22kg, it is manageable to position and install without specialist lifting equipment.

This table is a practical choice for kitchens where bench space is limited and vertical organisation matters — cafés, small restaurant kitchens, school or care catering operations, and similar environments. If your site runs a higher throughput and needs a longer or more heavily loaded surface, it is worth considering a heavier-gauge option from the wider range.

If you are fitting out a prep area and want to talk through layout, run length, or how this table might work alongside other surfaces in your kitchen, our team is happy to help you work it through before you commit.

This is a welded stainless steel wall-mounted preparation table with a double overhead gantry, designed to provide a practical, hygienic work surface for commercial kitchen prep areas. The double gantry adds laydown and storage capacity above the main worktop, making better use of vertical space in kitchens where bench area is limited. An undershelf below the main surface provides additional storage for trays, equipment, or dry goods.

In a working kitchen environment, the value of a well-built prep table comes down to surface stability, ease of cleaning, and how reliably it holds up to continuous daily use. The welded construction means there are fewer joints and seams to trap food debris, which matters both for hygiene compliance and for the time spent cleaning down between services. Adjustable feet allow the unit to sit level on uneven floors, which is a common practical requirement in older kitchen premises.

The double gantry arrangement suits kitchens where work-in-progress items, containers, or small equipment need to be kept accessible above the prep surface without cluttering the worktop itself. Practical advantages include:

• Welded 304 stainless steel construction for strength and hygiene compliance
• Double overhead gantry keeps the main work surface clear during prep
• Undershelf provides ground-level storage beneath the worktop
• Fully adjustable feet for stable positioning on uneven floors
• Wall-prep orientation suits kitchens where space along a run of wall is available

As a wall table rather than an island unit, this piece is intended to sit against a wall or alongside other equipment runs. It is well suited to small to medium kitchen operations — cafés, pub kitchens, takeaways, and similar environments. Kitchens with heavier throughput or more demanding prep requirements may want to consider a wider or heavier-duty bench configuration.

If you are unsure whether this table fits your kitchen layout or whether a different configuration would serve you better, we are happy to talk it through before you order.

This is a welded 304 stainless steel wall table with a double overhead gantry, designed to provide a solid, hygienic preparation surface with additional laydown or storage space at height. The table sits on a stainless steel frame with fully adjustable feet to accommodate uneven kitchen floors, and includes a fixed undershelf for below-counter storage. The double gantry is the defining feature here — it gives operators two tiers of overhead space for resting trays, holding containers, or keeping frequently used items within easy reach during service.

In a working kitchen, this kind of table earns its place through consistency. The welded construction means there are no bolt-together joints that loosen over time, and the 304 stainless steel surface handles daily cleaning and sanitising without deteriorating. The undershelf adds practical storage without taking up additional floor space, which matters in tighter prep areas.

The practical advantages of this setup include:

• Two-tier gantry keeps prep and service items accessible without cluttering the work surface
• Welded frame eliminates joint movement and reduces long-term maintenance
• Adjustable feet allow levelling on uneven or tiled kitchen floors
• Undershelf provides storage for trays, pots, or dry goods directly beneath the prep area
• Smooth stainless steel surfaces throughout support quick cleaning between tasks

Being a wall table, this unit is designed to sit flush against a kitchen wall rather than be accessed from all sides. That distinction matters when planning workflow and positioning — ensure the wall fixing or placement suits your kitchen layout before ordering. At 1800mm wide, it occupies a meaningful run of wall space, so confirming the available run and proximity to other equipment is worth doing at the planning stage.

This table is well suited to prep kitchens, bakeries, and catering operations where overhead storage and a generous preparation surface are both priorities. It works equally well in smaller professional kitchens where space efficiency is important. Sites with very high-throughput demands or a need for larger continuous preparation runs may find a wider or heavier-duty configuration more appropriate.

If you're unsure whether this configuration fits your kitchen layout or workflow, our team is happy to talk it through with you before you commit.

This is a 1500mm welded stainless steel wall table fitted with a double overhead gantry — a practical prep and pass surface designed for use in professional kitchen environments. The table provides a generous work surface at standard kitchen working height, with the double gantry sitting above to offer additional laydown space for ingredients, containers, or equipment that needs to stay within reach during service without cluttering the main worktop.

In a working kitchen, the advantage of a double gantry over a single rail becomes clear during busy service periods. Chefs gain two tiers of accessible overhead space, which helps keep the primary work surface clear and supports a more organised workflow. The welded construction — rather than bolt-together — gives the table rigidity under heavy daily use, reducing flex and rattle over time. The adjustable feet allow it to sit level on uneven floors, which matters in older buildings and refitted spaces where the floor is rarely perfectly flat.

Key practical features include:

• Welded 304 stainless steel construction throughout for durability and hygiene
• Double overhead gantry providing two tiers of additional storage or laydown space
• Stainless steel undershelf for bulkier storage beneath the worktop
• Fully adjustable feet to compensate for uneven flooring
• Smooth, cleanable surfaces with no bolt-together joins to trap debris

Being a wall table, this unit is designed to sit against a wall rather than in a central island position, which suits most prep and service runs in linear kitchen layouts. At 1500mm wide it fits comfortably in mid-sized kitchens without dominating the space, though it may feel limiting in high-throughput operations where longer continuous worktops are needed. For larger sites or more intensive prep areas, a longer or heavier-duty fabricated table may be worth considering.

This table is well suited to restaurants, cafés, contract caterers, and school or care catering operations that need a reliable, hygienic prep surface with practical overhead organisation. It is not a specialist purpose-built item — it works as a general-purpose worktable where an overhead gantry genuinely adds value to the workflow.

If you are unsure whether the dimensions, gantry configuration, or overall specification fits your kitchen layout, the team is happy to talk it through before you commit to an order.

This 1200mm wall table is a welded 304 stainless steel preparation surface with a double gantry above the worktop and a fixed undershelf below. The double gantry adds two tiers of overhead laydown or storage space, which can help free up the main work surface during a busy service. The welded construction means there are no bolt-together joints at stress points, contributing to the overall rigidity of the unit over time.

In a working kitchen environment, a table of this type earns its place through straightforward reliability. The 304 stainless steel surface is resistant to corrosion, easy to wipe down between tasks, and stands up to the cleaning chemicals routinely used in commercial kitchens. Fully adjustable feet allow the table to sit level on uneven floors, which matters more than it sounds in older kitchen premises.

The practical advantages for a kitchen team are largely about workflow and space use:

• Double gantry keeps frequently used items within reach without cluttering the prep surface
• Undershelf provides accessible storage for larger equipment or containers
• Welded frame reduces flex and movement during heavy preparation work
• Smooth stainless surfaces support quick cleaning between tasks
• Adjustable feet accommodate uneven floor surfaces without shimming

At 1200mm wide, this table is well suited to a single operator workstation or a defined section within a medium-sized kitchen. It works as a wall-mounted prep run or as a dedicated task station — plating, pastry, cold prep, and similar applications are all reasonable fits. Kitchens with more intensive throughput or multiple operators working simultaneously may find a wider or heavier-duty option more appropriate.

Installation is straightforward — no services are required, and at 21kg the table can be positioned and levelled by two people. Ensure the floor loading in the intended location is suitable once the table is stocked.

If you are fitting out a new section or want to talk through how this table would sit within your existing kitchen layout, the team is happy to help you work through the options.

This Vogue wall table is a straightforward, well-constructed stainless steel preparation surface designed for commercial kitchen use. The double gantry configuration adds two overhead shelving tiers above the worktop, providing accessible laydown space for ingredients, containers, or small equipment without encroaching on the worktop itself. An undershelf below the main surface offers additional storage, making the most of a compact footprint.

In a working kitchen environment, the practical value of a double gantry becomes clear quickly. Prep staff can keep frequently used items within arm's reach at height, which reduces movement and helps maintain a cleaner, more organised worktop during service. The welded construction means the frame remains stable under daily use rather than working loose at joints over time, which is a common issue with bolted alternatives in high-traffic areas.

Key operational advantages include:

• Double gantry provides two tiers of accessible overhead storage above the prep area
• Welded frame resists racking and movement during heavy daily use
• Undershelf adds ground-level storage without additional floor space
• Fully adjustable feet compensate for uneven kitchen floors
• 304 stainless steel construction supports thorough cleaning and meets food hygiene requirements

At 900mm wide, this table suits smaller prep areas, pass sections, or back-of-house support stations where worktop space is limited. It is wall-positioned by design, so it is worth confirming wall clearance and proximity to other equipment before installation. No mechanical installation is required — the table is freestanding on adjustable feet — but its position relative to extraction, power points, and workflow should be considered at the planning stage.

This table works well in smaller kitchens, café prep areas, and catering units where a compact, multi-level prep station is needed. For larger or higher-throughput operations requiring greater worktop depth or additional capacity, broader or heavier-duty alternatives are available within the range.

If you are unsure whether this configuration suits your layout or service volume, the team is happy to talk it through before you commit to an order.

This is a welded stainless steel wall work table with an overhead gantry, designed for use as a fixed food preparation surface in a commercial kitchen. The gantry sits above the main work surface and provides a raised shelf area for additional laydown space or light storage — useful for keeping frequently used items within reach without cluttering the prep surface itself. An undershelf beneath the main table adds a further tier of accessible storage at lower level.

In a working kitchen environment, this type of table earns its keep through sheer reliability. The welded construction means there are no bolted joints to loosen over time under the vibration and daily abuse of a busy service, and the 304 stainless steel throughout resists the moisture, cleaning chemicals, and temperature changes that characterise a commercial kitchen setting. The adjustable feet allow the table to sit level on uneven kitchen floors, which is a practical detail that matters more than it might first appear.

From an operational standpoint, the three-tier layout — gantry, main surface, undershelf — means a single unit contributes meaningfully to both prep workflow and general kitchen organisation:

• Overhead gantry keeps in-service items accessible without occupying the prep surface
• Welded frame eliminates joint-loosening over time in heavy daily use
• 304 stainless steel resists corrosion from cleaning agents and food acids
• Undershelf provides accessible dry storage within the same footprint
• Adjustable feet compensate for uneven floor surfaces

As a wall-mounted configuration, this table is designed to be positioned against a wall rather than used as a central island. That makes it well suited to galley-style kitchens, prep runs along a wall, or pass areas where space is at a premium. The 1800mm width provides a useful working span, but it does require adequate clear wall space and enough room in front for the operator to work comfortably.

This table is a practical choice for small to medium commercial kitchens — cafés, pub kitchens, small restaurant prep areas, and similar environments where a reliable, well-organised prep surface is needed without the cost of a fully bespoke fabrication. Sites with heavier throughput or larger prep teams may find they need a wider run or a heavier-gauge fabrication to match their demands.

If you are unsure whether this table fits the layout or workflow of your kitchen, we are happy to talk it through before you place an order.

This is a 1500mm welded stainless steel wall work table with an overhead gantry rail, designed to serve as a primary food preparation surface in a commercial kitchen. The gantry sits above the worktop and provides a laydown rail for utensils, small equipment, or ingredient containers, keeping the main work surface clear during service. The undershelf offers additional storage space at a lower level, making practical use of the full footprint of the unit.

In a working kitchen, a table like this earns its place through consistency. The welded 304 stainless steel construction handles the daily demands of a prep environment — repeated cleaning, surface contact with food, and the general wear that comes with a busy brigade. The adjustable feet allow the table to sit level on uneven kitchen floors, which is a common issue in older premises and something that matters more than it sounds when you are working at pace.

The gantry is particularly useful in tighter kitchens where wall space is at a premium. Rather than reaching to a shelf or moving items off the surface during prep, operators can hang or rest frequently used tools within arm's reach. This is a small detail operationally, but it tends to make a measurable difference to workflow during a busy service.

• Welded stainless steel construction provides long-term durability with minimal maintenance
• Overhead gantry keeps work surface clear and tools accessible during service
• Undershelf adds useful storage without increasing the table's footprint
• Adjustable feet allow level installation on uneven floors
• 304 stainless steel throughout supports food hygiene compliance

At 1500mm wide, this table suits a mid-sized prep area — it offers a meaningful run of surface without dominating a smaller kitchen. It works well as a dedicated prep station, a pass table, or a secondary worktop alongside refrigeration or cooking equipment. For larger operations needing more linear workspace, a wider format or additional table may be more appropriate.

If you are unsure whether this size is right for your kitchen layout or the way your team works, feel free to get in touch — a brief conversation about your setup can save a lot of hassle later.

This is a welded stainless steel wall-mounted work table with an overhead gantry shelf, designed for use as a fixed food preparation surface in commercial kitchens. The gantry sits above the main work surface, providing additional laydown space or a practical area for containers, ingredient trays, or small equipment. An undershelf below the worktop adds further storage without taking up extra floor space. The table stands on adjustable feet to accommodate uneven floors, which is a practical consideration in older kitchen environments.

In day-to-day kitchen use, a table of this type performs best as a dedicated prep station. The welded construction gives it rigidity under sustained use, and the 304 stainless steel surface is straightforward to clean down between tasks. The gantry is particularly useful during service when having equipment or mise en place at eye level reduces time spent reaching across a worktop. The undershelf keeps the floor area clear, which matters both for hygiene compliance and for ease of cleaning the surrounding area.

Practical benefits worth noting for kitchen operators:

• Welded frame provides a stable, rattle-free work surface under heavy use
• Overhead gantry creates usable vertical space without additional furniture
• Undershelf keeps storage off the floor and within easy reach
• 304 stainless steel construction supports standard kitchen hygiene regimes
• Adjustable feet allow for levelling on imperfect floor surfaces

Installation is straightforward. This is a freestanding table positioned against a wall, so no mechanical fixing is required unless you choose to anchor it. There are no electrical, gas, or water connections needed. At 19kg the table is manageable for two people to position during a kitchen fit-out. The 1200mm width suits a medium prep run; if your kitchen processes higher volumes across multiple cooks, a longer or heavier-duty unit may be worth considering.

This table is well suited to small and medium commercial kitchens, prep areas, and back-of-house stations where a reliable, fixed preparation surface is needed without significant investment. It is commonly used in café kitchens, small restaurant prep rooms, and catering operations where clear worktop organisation matters.

If you are fitting out a new kitchen or replacing ageing prep furniture and want to make sure the spec fits your workflow, our team is happy to talk it through with you.

This is a welded stainless steel wall work table from Vogue, fitted with an overhead gantry shelf and an undershelf below the worktop. It is designed to sit against a wall in a commercial kitchen and provide a dedicated, hygienic food preparation surface with additional laydown and storage space built in above and below the work level.

In practice, wall tables of this type are a reliable workhorse in professional kitchens. The welded construction — rather than bolted frame assembly — gives the unit rigidity under sustained daily use, and 304 grade stainless steel handles the repeated cleaning, heat, and moisture exposure that comes with busy service. The gantry shelf above the worktop is particularly useful for keeping frequently used equipment or mise en place within reach without occupying prep surface area. Adjustable feet allow the table to sit level on uneven floors, which is a common consideration in older kitchen premises.

From an operational standpoint, the key practical advantages are:

• Welded frame provides lasting structural rigidity under heavy use
• Overhead gantry keeps the worktop clear while tools remain accessible
• Undershelf adds useful dry storage without increasing the footprint
• 304 stainless steel resists corrosion and cleans down quickly between tasks
• Adjustable feet accommodate uneven floors without shimming

At 900mm wide, this table suits smaller preparation stations, pass areas, or secondary prep zones in medium-sized kitchens. It is not suited to high-volume central prep runs where a wider or heavier-gauge unit may be more appropriate. Installation is straightforward — no utilities are required — though positioning against a wall is advisable to make full use of the gantry.

This table works well for small to medium catering operations, cafés, pub kitchens, and satellite prep areas within larger sites. Operators needing a longer run of prep surface, or a freestanding island configuration, should consider the wider options available within the range.

If you are fitting out a new kitchen or replacing existing prep furniture, we are happy to talk through layout and sizing before you commit to an order.

This is a welded stainless steel wall preparation table with an integrated overhead gantry, designed for use in commercial kitchens where a clean, durable prep surface and efficient use of vertical space are priorities. The work surface sits at a standard working height, the gantry above provides a useful laydown or light storage tier, and the undershelf below adds a further storage zone — all within the same footprint.

In day-to-day kitchen use, a table of this length gives prep staff a generous run of work surface suitable for supporting multiple tasks simultaneously — portioning, assembly, cold prep — without operators crowding one another during service. The welded construction, rather than bolted-together framing, means the table holds its rigidity over time and does not loosen or rack under the physical demands of a working kitchen. The adjustable feet allow it to sit level on uneven floors, which is a practical necessity in many older kitchen environments.

The key operational advantages of this table include:

• Welded frame construction for long-term structural stability under daily use
• Overhead gantry keeps frequently used equipment or containers off the main work surface
• Undershelf provides accessible storage for bulk containers, trays, or gastronorm equipment
• 304 stainless steel throughout supports reliable hygiene and straightforward cleaning
• Adjustable feet accommodate uneven floor surfaces common in commercial premises

Installation is straightforward — this table is freestanding and requires no electrical, gas, or water connections. As a wall table it is designed to sit with one long edge against a wall, so clearance on three sides is sufficient. At 1800mm wide it requires a reasonable run of wall space; kitchens with tighter layouts may find a shorter table more practical. The table weighs 25kg, so it can be positioned by two people without specialist equipment.

This table is well suited to small and medium-sized commercial kitchens — cafés, small restaurants, pub kitchens, and similar operations — where a solid, hygienic prep surface with built-in storage tiers is needed without a significant capital outlay. For larger operations running continuous high-volume prep, a heavier-gauge or larger-footprint table may be a more appropriate long-term investment.

If you are fitting out a new kitchen or replacing existing prep furniture and want to make sure the layout and spec is right for your operation, our team is happy to talk it through before you order.

This is a welded stainless steel wall preparation table with an overhead gantry shelf, designed for use in commercial kitchen prep areas where surface space and organisation both matter. The 1500mm working width gives a generous run of prep surface, while the gantry provides an elevated shelf above the worktop for keeping ingredients, containers, or small equipment within reach without encroaching on the main work area. Construction is in 304 stainless steel throughout, with fully adjustable feet to level the table on uneven kitchen floors, and an undershelf for additional storage at low level.

In a working kitchen, the layout of this table suits wall-mounted or run-end positions where one side is against a wall. The gantry adds practical vertical use of space rather than simply extending the footprint, which is useful in kitchens where floor space is limited. The welded construction means there are fewer joints to harbour debris, which supports good hygiene practice and simplifies end-of-service cleaning.

This table is well suited to kitchens that need a dedicated prep station with some organisation built in:

• Welded stainless steel construction reduces join points and aids thorough cleaning
• Overhead gantry keeps ingredients and containers accessible without cluttering the worktop
• Undershelf adds usable storage without increasing the table's footprint
• Adjustable feet allow levelling on uneven or tiled kitchen floors
• 304 grade stainless steel is appropriate for food contact surfaces in commercial use

At 1500mm wide, this table sits comfortably in mid-sized kitchens and is a practical choice for catering operations running regular prep volumes — from school kitchens and pub catering to small restaurant back-of-house. Kitchens handling higher prep volumes across multiple sections may find it useful as a secondary or dedicated station rather than a single main prep surface. For operations needing more linear workspace, wider versions are available within the range.

If you are unsure whether this table fits your kitchen layout or workflow, we are happy to talk it through before you order.

This is a welded stainless steel wall prep table from Vogue, designed to sit against a kitchen wall and provide a dedicated food preparation surface with an overhead gantry for additional laydown or light storage. The gantry sits above the main worktop and is well suited to holding condiments, small equipment, or items in frequent rotation during service. An undershelf below the worktop provides further storage, helping operators keep the work surface clear without losing access to commonly used items.

Constructed from 304-grade stainless steel throughout, the table is built to withstand the rigours of a busy commercial kitchen — resistant to moisture, easy to sanitise, and capable of handling the day-to-day demands of food preparation shifts. The welded construction adds structural rigidity compared to bolted alternatives, which matters in environments where tables are regularly loaded, wiped down, and moved during deep cleans. Fully adjustable feet allow the table to level correctly on uneven kitchen floors, which is a practical consideration many operators overlook until installation.

In terms of operational benefits, this table suits kitchens where wall space is being used efficiently and where a compact prep station is needed without sacrificing storage flexibility:

• Gantry shelf keeps frequently used items within arm's reach during service
• Undershelf adds usable storage without increasing the table's footprint
• 304 stainless steel construction supports thorough cleaning and meets food hygiene standards
• Welded frame reduces flex and wobble under working loads
• Adjustable feet accommodate uneven floor surfaces

At 1200mm wide, this table works well in small to medium commercial kitchens, ghost kitchens, and preparation areas where space is at a premium. It is not intended for heavy-duty fabrication work or as a primary pass surface in high-volume operations — for those applications, a heavier-gauge or larger-format table would be more appropriate.

If you are unsure whether this table suits your prep layout or whether a different configuration would serve your kitchen better, the team is happy to talk it through before you order.

This is a welded stainless steel wall preparation table with an overhead gantry shelf and a lower undershelf, designed to provide a practical, hygienic work surface in commercial kitchen environments. The gantry extends usable vertical space above the work surface, giving operators somewhere to keep small equipment, containers, or condiments within arm's reach without cluttering the main prep area. Fully adjustable feet allow the table to sit level on uneven kitchen floors.

In a working kitchen, a well-constructed prep table needs to hold up to constant daily use — repeated cleaning, heavy chopping boards, the weight of full gastronorm containers, and the general wear that comes with a busy service. The welded construction here avoids the flex and instability that can develop in bolted-together tables over time, making this a more dependable option where the table will be in continuous use.

The practical advantages this table offers in day-to-day operation include:

• Gantry shelf keeps frequently used items accessible without using prep surface space
• Undershelf provides additional storage for dry goods or equipment close to hand
• Welded frame resists racking and movement under heavy use
• Adjustable feet accommodate uneven floors without shimming
• Smooth stainless steel surfaces clean down quickly between tasks

At 900mm wide, this table suits smaller preparation areas, back-of-house sections, or wall-run configurations in medium-sized kitchens. It is worth considering whether the depth and gantry height work for your specific workflow before ordering — kitchens with taller operators or higher-volume prep throughput may find a deeper or wider table more practical. For higher-capacity sites, a heavier-duty or larger-format prep table may be a better fit.

If you are fitting out a new kitchen section or replacing an existing prep surface and want to make sure this table will work within your layout, the team is happy to talk through the options before you commit.

This Vogue stainless steel wall table is a fixed preparation surface designed for permanent installation against a kitchen wall. The integrated overhead gantry provides a raised shelf above the worktop, giving operators additional laydown space for containers, utensils, or equipment without encroaching on the main work surface below. The welded construction means the frame is a single rigid unit rather than a bolted assembly, which contributes to long-term stability in daily use.

In a working kitchen, a table of this width gives a useful run of preparation space suited to a single operator or shared between tasks at either end. The 304 stainless steel work surface resists corrosion, is straightforward to wipe down between uses, and meets the hygiene expectations of a commercial environment. The undershelf adds usable storage at a lower level, keeping frequently needed items within reach. Adjustable feet allow the table to sit level on uneven flooring, which is a practical consideration in older kitchen premises.

Key operational points worth noting:

• Welded frame provides a stable, rattle-free structure under daily preparation workloads
• Overhead gantry keeps the main worktop clear during busy service periods
• 304 stainless steel surface is straightforward to clean and maintain
• Undershelf adds lower-level storage without additional footprint
• Adjustable feet accommodate uneven or worn kitchen floors

Installation is straightforward — this table requires no electrical, gas, or water connections. The main practical consideration is wall clearance for the gantry, and ensuring the available floor run comfortably accommodates the 1800mm width alongside adjacent equipment and circulation routes. At just under 24kg, it can be manoeuvred and positioned by two people without specialist lifting equipment.

This table is well suited to small and medium commercial kitchens — cafés, pub kitchens, school catering operations, and similar sites where a reliable, hygienic preparation surface with some overhead organisation is needed. Sites with heavier throughput or longer preparation runs may find a wider table or a heavier-duty fabricated alternative more appropriate for their workload.

If you are fitting out a kitchen and want to talk through whether this table works for your layout and service style, our team is happy to help you think it through before you order.

This is a welded stainless steel wall table from Vogue, fitted with an overhead gantry shelf. The main work surface sits at standard counter height and is supported on a stainless steel frame with adjustable feet to accommodate uneven floors. A lower undershelf provides additional storage, and the gantry above the work surface offers a practical laydown area for equipment, containers, or mise en place during service. Construction is in 304 stainless steel throughout.

In a working kitchen environment, a table like this earns its place at a prep station, a pass, or alongside a cooking line where surface space and vertical organisation both matter. The gantry keeps the main worktop clear without sacrificing access to frequently used items, which helps maintain a logical workflow during busy periods. The welded construction means there are no bolt-on joints at the frame corners — a practical advantage when the table is wiped down repeatedly through the course of a shift.

Key operational advantages include:

• Welded frame construction reduces joint failure under daily commercial use
• Adjustable feet allow the table to sit level on imperfect kitchen floors
• Gantry shelf keeps the work surface clear while maintaining easy reach
• Undershelf adds storage without increasing the table's footprint
• 304 stainless steel resists corrosion and meets food safety hygiene requirements

Because this is a wall table, it is designed to sit flush against a wall rather than in a freestanding island position. The 1500mm width suits small to medium kitchens well; for larger operations running multiple prep zones, wider configurations are available. There are no utilities required — no electrical, gas, or water connections — so placement is straightforward, though the wall surface behind should be in good condition if the table is to be positioned close to it for hygiene compliance purposes.

This table is well suited to cafés, small restaurants, bakeries, and catering units where reliable prep space with some overhead organisation makes a practical difference. For very high-throughput sites where heavier-gauge fabrication or greater depth would be beneficial, it is worth reviewing what else is available before committing.

If you are fitting out a new kitchen or reorganising an existing one and want to talk through table configurations before ordering, the team is happy to help.

This 1200mm stainless steel wall table is a straightforward, robust preparation surface built for everyday commercial kitchen use. It combines a full-width work surface with an overhead gantry shelf, giving operators two usable levels in the same footprint — useful where wall space is limited and bench area needs to work hard. The welded construction keeps the frame rigid under sustained use, and the adjustable feet allow the table to sit level on uneven kitchen floors.

In a working kitchen, the practical value comes from the layout it supports. The gantry keeps frequently used items — containers, condiments, mise en place — within easy reach without taking up bench space. The undershelf adds a third tier of storage, useful for bulkier items or equipment not needed immediately during service. The 304 stainless steel surface is straightforward to clean down between uses and holds up well against the knocks and spills of a busy prep environment.

• Gantry shelf keeps frequently used items accessible without losing bench space
• Welded frame provides a stable, rigid structure under daily commercial use
• Undershelf adds useful storage without extending the footprint
• Adjustable feet allow levelling on uneven or tiled floors
• 304 stainless steel surfaces are hygienic and easy to clean down quickly

Installation is uncomplicated — the table requires no services connections and can be positioned against any suitable wall. At 17.5kg it can be moved or repositioned without specialist equipment. The 600mm depth suits most standard kitchen layouts, though it is worth confirming the available wall run before ordering, particularly in kitchens where runs are already divided by equipment or doors.

This table is well suited to small and medium commercial kitchens, café back-of-house areas, and prep sections where a compact, dual-level worksurface is needed. For larger operations with higher throughput demands, longer or heavier-duty fabricated options may be worth considering.

If you are fitting out a prep area and want to talk through how this table would work alongside your other equipment, the team is happy to help.

This is a welded stainless steel wall table from Vogue, fitted with an overhead gantry and an undershelf. It is designed to provide a fixed, hygienic food preparation surface in a commercial kitchen environment, with the gantry adding usable overhead space for condiments, small equipment, or mise en place containers during service.

In day-to-day kitchen use, the welded construction means the table holds its shape under the repeated knocks, heavy loads, and frequent cleaning that working kitchens demand. The 304 stainless steel surface is straightforward to wipe down and resists the effects of food acids and cleaning chemicals over time. The adjustable feet allow the table to sit level on uneven floors, which is a practical consideration in older kitchen premises where floor surfaces are rarely perfectly flat.

The operational advantages of this table centre on its layout efficiency:

• Gantry provides dedicated overhead laydown space, keeping the main prep surface clear
• Undershelf adds secondary storage without increasing the table's footprint
• Welded frame removes the flex and loosening associated with bolted alternatives
• Stainless steel throughout supports food-safe hygiene compliance
• Adjustable feet accommodate minor floor irregularities during installation

This is a wall-mounted-style table intended to sit against a wall rather than freestand in the centre of a kitchen. It is worth confirming the available wall run and adjacent clearances before ordering, particularly if the gantry will sit close to extraction canopies or overhead services. At 900mm wide, it suits a single prep station rather than a shared multi-operator run — kitchens needing greater continuous bench length should consider wider or modular alternatives.

This table is well suited to small and medium commercial kitchens, including those in cafés, sandwich bars, pub kitchens, and catering units where a compact, dedicated prep zone is needed. For larger brigades or higher-throughput environments, a longer bench configuration may serve better.

If you are unsure whether this table fits your available space or workflow, the team is happy to talk it through before you commit.