Ingredient Bins

This is a straightforward, practical storage bin designed for bulk dry ingredient handling in commercial kitchens, bakeries, and food production environments. Made from polyethylene, it holds 72 litres and sits on four castors, making it easy to move around a prep area or bring directly to a workstation as needed.

In day-to-day kitchen use, mobile ingredient bins like this are most commonly used for flour, sugar, rice, grains, and similar dry goods. The ability to wheel the bin to wherever it is needed — rather than carrying heavy containers across the kitchen — reduces effort and the risk of spillage during busy prep periods. The slide or lift-up lid keeps contents protected between uses while still allowing quick, one-handed access when hands are occupied.

From an operational standpoint, the practical advantages are straightforward:

• Clear lid allows contents to be identified without opening
• Four heavy-duty castors allow easy repositioning around the kitchen
• Polyethylene construction is robust, easy to wipe down, and food-safe
• Lid design supports both slide and lift access depending on preference
• Lightweight at 5kg empty, manageable even when partially loaded

There are no electrical or plumbing requirements. The main practical consideration is floor space and access routes — at 460mm square, the bin takes up a modest footprint, but in a tight kitchen it is worth confirming there is sufficient clearance to move it freely between storage and prep areas. It is not suitable for wet ingredients or liquids.

This size works well for small to medium kitchens or as a secondary bin in larger operations. For sites handling higher volumes of dry goods, or where multiple ingredients need to be stored in the same format, larger capacity options are available in this range.

If you are unsure whether this size suits your throughput or storage setup, we are happy to help you work it out before you order.

This is a straightforward, robust ingredient bin made from food-safe polyethylene and mounted on four castors for easy movement around the kitchen. At 118 litres, it holds a useful volume of dry goods, flour, sugar, rice, or similar bulk ingredients, and the clear lid allows staff to identify contents at a glance without needing to open it.

In a working kitchen, the practical value of a bin like this is in the daily workflow rather than any single feature. It can move from a dry store to a prep station and back again without fuss, and the polyethylene construction handles the temperature variation that comes with moving between ambient, chilled, and frozen environments — making it equally at home in a walk-in freezer or a dry goods store.

• Clear lid allows quick visual identification of contents without opening
• Four castors make it manageable when full, even for a single member of staff
• Polyethylene construction is easy to wipe down and maintains hygiene standards
• Temperature tolerance across a wide range suits use in freezer and ambient storage
• Lightweight when empty, keeping it practical for daily repositioning

It is worth considering whether 118 litres suits your actual usage pattern. For kitchens with very high bulk ingredient turnover, a larger capacity bin may reduce the frequency of refills. Equally, if space is limited or ingredients are used in smaller quantities, a smaller bin may be more appropriate to avoid ingredients sitting for extended periods.

If you are unsure which size works best for your storage setup or service volume, we are happy to talk it through.

This trolley is designed specifically to work with Scaritech's 20 litre dough tubs and 40 litre ingredient bins, providing a stable, wheeled base that keeps bulk ingredients mobile and accessible during prep. Built from polypropylene and supplied as a flat-pack kit with castor wheels, it assembles simply without specialist tools and adds a practical layer of organisation to ingredient storage areas.

In busy prep kitchens, keeping heavy containers of flour, sugar, or other dry goods off the floor and easy to move makes a genuine difference to workflow and manual handling risk. The trolley allows fully loaded bins to be wheeled between storage and workstation without repeated lifting, which is particularly useful during baking or pastry prep when large quantities of ingredients are in regular use.

• Keeps ingredient bins elevated, organised, and mobile during service prep
• Reduces manual handling when moving heavy dry goods around the kitchen
• Lightweight polypropylene construction is easy to clean and resistant to moisture
• Castor wheels allow repositioning without effort, even when fully loaded
• Flat-pack kit format means it can be stored or relocated with minimal disruption

At 3kg, the trolley itself is easy to handle even before bins are fitted. Its compact footprint suits tighter prep areas and dry stores where space is limited, though it is worth confirming your floor surface is suitable for castors before positioning it permanently in your workflow.

This trolley is best suited to bakeries, pastry sections, and prep kitchens that regularly use Scaritech's container range. It is a practical addition rather than a standalone storage system — if your operation uses a large number of bins simultaneously, it is worth considering how many trolleys you would need to keep the workflow running efficiently. If you are unsure whether this suits your setup, the team is happy to advise.

This is a straightforward, practical dry goods storage bin designed for commercial kitchens, bakeries, and food prep environments where bulk ingredients need to be kept accessible, contained, and easy to move. The 90-litre capacity makes it well suited to sites handling moderate to high volumes of flour, sugar, rice, or similar loose dry goods on a daily basis.

In a working kitchen, these bins earn their place by keeping bulk ingredients off the floor, clearly identified through the transparent polycarbonate lid, and within easy reach of the prep area. The four heavy-duty castors mean the bin can be pulled to wherever it's needed during service and returned to storage without effort — a practical detail that saves time during busy periods and makes cleaning the floor around it considerably easier.

The key practical advantages in day-to-day use:

• Clear polycarbonate lid keeps contents visible without opening the bin
• Lid design allows sliding or lifting access depending on workflow preference
• Four castors support easy repositioning around the kitchen or store
• Polyethylene body is robust, food-safe, and straightforward to clean
• White finish helps with identification and hygiene monitoring

There are no installation requirements — these bins are ready to use as delivered. They are suitable for dry goods only and should be kept away from direct heat sources. For sites with very high-volume throughput or where a larger reserve capacity is needed, bins with a greater capacity are available in the range.

If you're unsure which size or quantity of bins best fits your prep workflow, the team is happy to talk it through with you.

This is a 65-litre mobile ingredient bin from Fletcher, constructed from polyethylene with a clear polycarbonate lid. It is designed to store dry ingredients — flour, sugar, rice, and similar bulk goods — in a hygienic, sealed container that can be moved around the kitchen as required. The yellow colouring supports colour-coded storage systems, which are commonly used in professional kitchens to separate ingredients by allergen status or product category.

In a working kitchen environment, the practical value of a bin like this comes down to a few straightforward factors: it keeps bulk dry goods clean and contained, the clear polycarbonate lid allows staff to check contents at a glance without lifting it, and the four heavy-duty castors mean it can be repositioned during prep or moved aside during service without difficulty. The lid design — sliding or lift-off depending on the configuration — keeps access quick during busy periods.

• Clear lid keeps contents visible without opening the bin
• Yellow finish supports allergen or category colour-coding
• Four castors allow easy repositioning during prep and service
• Polyethylene body is robust and straightforward to clean
• Suitable for flour, sugar, rice, and similar dry bulk goods

At 65 litres, this bin is a practical mid-size option. It suits smaller prep kitchens or sections handling moderate bulk quantities. For sites storing larger volumes or running multiple prep stations simultaneously, a higher-capacity bin in the same range may be worth considering.

There are no installation requirements — the bin is ready to use. It does not require a fixed position, power, or drainage. Storage space and floor surface should be considered; castors perform best on smooth, level flooring.

If you are building out a colour-coded dry storage system or are unsure which size or combination of bins suits your operation, we are happy to help you work through the options.

This Araven ingredient bin is a 2/3 gastronorm-sized polypropylene container designed for organised ingredient storage in commercial prep and service areas. At 16 litres capacity, it sits in the mid-range of Araven's ingredient bin line and is a practical choice for holding prepped ingredients, dry goods, or portioned items where structured, accessible storage matters.

In a working kitchen, these bins are commonly used along the prep line or in cold storage areas. The stackable design allows multiple bins to be stored vertically without blocking access to the contents below — a useful feature when counter or shelf space is limited during a busy service. The built-in FIFO (First In, First Out) system supports stock rotation, helping kitchens manage ingredient freshness and reduce waste in a straightforward, low-effort way.

The polypropylene construction is robust enough for daily commercial use, resistant to staining and odour absorption, and fully dishwasher safe for end-of-service cleaning. Araven supplies these bins with colour-coded clips, which allows kitchens to establish a colour-coding system for allergen management or ingredient separation — a practical hygiene measure that many operators find useful alongside their existing food safety procedures.

• Stackable design with accessible lids — no need to unstack to reach contents
• Colour-coded clips support allergen and ingredient separation systems
• FIFO rotation built into the stacking system to manage stock freshness
• Dishwasher safe for straightforward end-of-service cleaning
• 2/3 GN footprint fits standard gastronorm shelving and storage systems

This bin suits prep kitchens, salad and garnish stations, bakery environments, and anywhere that benefits from structured, rotation-aware ingredient storage. For sites needing larger-volume storage, deeper or full GN-sized bins may be more appropriate.

If you are building out a colour-coded storage system or have questions about fitting these into an existing GN racking setup, we are happy to help you work through the options.

This is a 90-litre mobile ingredient bin from Fletcher, designed for dry goods storage in commercial kitchen and food production environments. The body is constructed from polyethylene, and the lid is made from clear polycarbonate, allowing staff to see contents at a glance without opening the bin. The red colour coding makes it straightforward to apply ingredient or allergen segregation systems where your operation requires it.

In a working kitchen, the practical advantage of a bin like this is in keeping bulk dry ingredients — flour, sugar, rice, and similar staples — off the floor, contained, and accessible without unnecessary handling. The clear lid removes the guesswork during a busy service, and the sliding or lift-up lid design means access is quick even with one hand occupied. Four heavy-duty castors allow the bin to be moved between prep areas, storage rooms, or dispatch points without effort.

• Clear polycarbonate lid keeps contents visible without opening
• Red colour supports allergen or ingredient segregation protocols
• Castors allow easy repositioning between prep and storage areas
• Polyethylene body is durable and straightforward to clean
• Sliding or lift-up lid access suits fast-paced prep environments

At 90 litres, this bin suits mid-volume operations — a busy café, a school kitchen, or a catering production unit. It is not intended for very high-throughput sites where multiple large-format bins would be needed simultaneously. If your storage demands are more modest, smaller capacities are available in the same range.

If you are unsure which size or how many bins your operation needs, we are happy to talk it through before you order.

This is a straightforward, heavy-duty polypropylene ingredient bin designed for bulk dry goods storage in commercial kitchens. The round format suits countertop or floor placement and is commonly used for flour, sugar, rice, cereals, and similar dry ingredients where quick access and easy scooping are priorities during service.

Polypropylene construction makes the bin resistant to cracking, staining, and food odours under regular use. It is lightweight enough to move when empty yet stable in use, and the smooth interior surfaces make it practical to clean and dry quickly between fills. This kind of bin tends to earn its keep in prep areas, bakery sections, and dry stores where ingredients are accessed repeatedly throughout the day.

• Resistant to cracking and staining under regular kitchen use
• Smooth interior for straightforward cleaning and hygiene compliance
• Lightweight build makes repositioning easy when empty
• Suited to flour, sugar, rice, and similar bulk dry goods
• Compatible with a separately available lid for covered storage

It is worth noting that the lid is sold separately, so if covered storage is a requirement — as it often is for allergen control or pest prevention — that should be factored into your order. The bin is not designed for wet ingredients or liquid storage.

This bin is well suited to small and medium operations with moderate dry goods throughput. Larger sites with higher-volume storage demands may find a bigger-capacity option more practical. If you are equipping a new dry store or replacing several containers at once, it is worth having a conversation with us about quantities and sizing before you order.

This is a straightforward, practical dry goods storage bin designed for use in commercial kitchen prep and dry store areas. The polyethylene body is robust and food-safe, with a clear polycarbonate lid that keeps contents visible without needing to open the bin — useful when working quickly during prep. The blue colour coding helps kitchens follow allergen or ingredient separation protocols.

In day-to-day use, the bin works well for storing bulk dry ingredients such as flour, sugar, rice, or similar commodities. Four heavy-duty castors allow the bin to be moved between storage and prep areas without lifting, which is particularly useful when the bin is fully loaded. The slide or lift-up lid design means access is quick during busy service preparation without the lid getting in the way.

• Clear polycarbonate lid keeps contents visible at a glance
• Blue colour coding supports allergen or ingredient separation
• Castors allow easy repositioning without emptying the bin
• Polyethylene construction is food-safe, durable, and easy to wipe down
• Slide or lift-up lid allows quick access during prep

There are no electrical or plumbing requirements. The bin needs a reasonably level floor surface for the castors to roll freely, and adequate aisle width to manoeuvre it safely when full. It is worth noting that at 65 litres this bin suits moderate-volume dry storage — kitchens with very high throughput or larger bulk storage needs may find a larger capacity option more appropriate.

This bin is well suited to small to medium commercial kitchens, school catering, care homes, and contract catering operations where organised, mobile dry goods storage is needed. If you are equipping a larger site or need multiple bins for a full colour-coded system, it is worth having a conversation with us to make sure you get the right combination.

Cambro's mobile ingredient bins are a long-standing staple in commercial prep and dry storage areas. This 81-litre white version is a straightforward, well-made container for bulk dry ingredients — flour, sugar, rice, cereals — with a wheeled base that makes it practical to move between storage and prep stations without lifting.

Constructed from food-grade polyethylene, the bin is robust enough for daily use in busy kitchens and holds up well against knocks, cleaning chemicals, and the general wear of a working environment. The smooth interior and hinged lid keep ingredients protected and make cleaning straightforward — an important consideration in kitchens operating under HACCP requirements. An integrated S-hook on the bin allows scoops or portioners to be kept with the container, which helps with portion consistency and reduces the risk of scoops being left loose on worktops.

• Wheeled base allows easy repositioning between storage and prep areas
• Hinged lid keeps ingredients protected and reduces contamination risk
• Smooth polyethylene interior is easy to clean and dry thoroughly
• Integrated S-hook keeps dedicated scoops with the correct bin
• Suitable for a wide range of dry bulk ingredients in commercial use

At 81 litres, this bin suits moderate-volume prep operations — a café, small restaurant, school kitchen, or hospitality outlet running regular service. Sites handling very high throughput of bulk ingredients may find a larger-capacity bin more practical to avoid frequent refilling mid-shift.

If you're weighing up whether this size fits your storage setup or service volume, the team is happy to talk it through.

This Araven ingredient bin is a full 1/1 gastronorm polypropylene container designed to hold bulk ingredients at prep and service stations. The open-top format allows kitchen staff to scoop or portion directly from the bin without removing it from a stack, which suits high-turnover prep areas where speed and access matter.

The bin is built around a first-in, first-out rotation system. Stock is loaded from the rear and dispensed from the front, which helps teams maintain correct ingredient rotation without relying on labelling discipline alone. In busy kitchens where staff change frequently or service pressure is high, a bin that enforces rotation mechanically is more reliable than one that depends entirely on procedure.

Practically, the polypropylene construction is robust enough for daily commercial use, resists staining from most food products, and is dishwasher safe, which keeps cleaning straightforward. Colour-coded clips are supplied, allowing kitchens to assign bins to specific ingredient types or allergen categories — a useful feature where cross-contamination controls are part of the food safety plan.

• Stackable design allows access to contents without unstacking
• FIFO loading supports correct ingredient rotation in service
• Dishwasher safe for straightforward end-of-shift cleaning
• Colour-coded clips support allergen segregation systems
• Standard 1/1 GN footprint fits most existing racks and cold drawers

This size is well suited to medium-volume prep operations and standard service lines. For higher-volume sites or walk-in storage where larger batch quantities are handled, it is worth considering whether a greater capacity suits the workflow better.

If you are fitting out a prep station or reviewing your ingredient storage arrangement and want to talk through what works in practice, our team is happy to help.

This Araven ingredient bin is a straightforward, practical storage container sized to the standard 1/1 gastronorm footprint, with a 50-litre capacity suited to storing dry goods, prepped ingredients, or bulk foodstuffs in a busy kitchen environment. Made from BPA-free polypropylene, it is fully food-safe and built to handle the kind of daily use that commercial kitchens put through their storage equipment.

The clear body means staff can identify contents at a glance without lifting the lid — a small but useful advantage during a busy service when speed matters. The wide opening gives good access for scooping or portioning, and the large lid keeps contents covered and protected between uses. The container is designed to work across different kitchen zones, including ambient storage areas, cold rooms, and freezer use, making it adaptable to how your operation is set up.

A few practical advantages worth noting:

• Colour-coded clips allow food separation by type, supporting allergen and cross-contamination controls
• The 1/1 GN format fits standard shelving and racking systems already in most commercial kitchens
• Lightweight enough for easy handling when full or when cleaning
• Polypropylene construction resists odour absorption and cleans down quickly
• Suitable for use from freezer to ambient storage without material degradation

At 50 litres, this bin is a reasonable size for moderate-volume prep and ingredient storage. Sites with higher throughput or larger batch preparation may find they need multiple units or a larger-capacity format to keep pace with demand. It stacks efficiently when empty, which helps with storage when not in use.

This bin is well suited to any commercial kitchen needing reliable, food-safe dry or prepped ingredient storage — from small independents to larger operations using it as a secondary container alongside higher-volume storage solutions. If you are unsure whether this size fits your workflow, or want to talk through how best to organise your ingredient storage, we are happy to help.

This is a 100-litre mobile ingredient bin from Araven, constructed in clear polyethylene with a fitted lid and castor base. It is designed to store bulk dry goods — flour, sugar, rice, cereals, and similar ingredients — in a contained, hygienic, and easily relocatable format. The transparent body is a straightforward practical feature: staff can assess stock levels at a glance without removing the lid, which saves time during busy prep periods.

In working kitchens, the castor base earns its keep when the bin is near capacity. Moving a full bin without lifting reduces manual handling strain and allows one person to reposition it between the delivery bay, dry store, and prep area without assistance. The polyethylene construction tolerates a wide temperature range, making the bin suitable not only for ambient dry storage but also for use in chilled or freezer environments where applicable.

The key operational advantages in practice:

• Clear body allows stock checks without opening the lid during service
• Castors allow repositioning without lifting, even when the bin is full
• Polyethylene is straightforward to clean and sanitise thoroughly
• Secure lid reduces contamination risk and helps maintain ingredient quality
• No electrical or water connection required — place and use

There are no installation requirements beyond adequate floor space and a level, hard surface for the castors to run on. The lid will need clearance to open fully, so factor that into where you position it within the store or prep area.

This bin suits bakeries, central production units, school catering operations, and any high-volume prep kitchen managing bulk dry ingredients. For sites handling smaller quantities or working in tighter spaces, lower-capacity bins in the same range are available. If you are specifying several units to cover a full ingredient range, it is worth mapping out your storage layout before ordering.

If you would like to talk through how many units your operation needs or whether this capacity fits your workflow, the team is glad to help.

This Fletcher mobile ingredient bin is a straightforward, practical storage solution for dry ingredients, flour, rice, sugar, and similar bulk goods used in commercial preparation areas. The polyethylene body is robust and food-safe, while the clear polycarbonate lid keeps contents visible at a glance without needing to open the bin — a small but useful time-saver during a busy prep shift.

The lid slides or lifts for easy access during service, and four heavy-duty castors allow the bin to be moved freely around a kitchen or brought directly to a workstation as needed. This kind of flexibility suits kitchens where bulk ingredients are used across multiple prep stations or where storage areas are separate from the main prep zone.

In practical terms, this bin works well where operators want to keep dry goods off the floor, clearly labelled, and easy to reposition without lifting. The blue colour coding supports HACCP-compliant storage practices by helping teams distinguish between ingredient types or allergen-risk categories at a glance.

• Clear lid allows ingredient identification without opening
• Blue colour coding supports allergen and ingredient separation
• Castors allow repositioning without lifting the loaded bin
• Polyethylene body is easy to wipe down between uses

At 90 litres, this bin suits mid-volume operations. Kitchens with very high bulk ingredient turnover may find a larger capacity more practical, while smaller operations handling modest quantities could manage with a smaller size.

If you're unsure which size or colour code best fits your storage setup, the team is happy to talk it through.

The Araven Koala is a polypropylene ingredient bin designed for the storage and dispensing of dry goods in commercial kitchens, cafés, and hospitality settings. The hinged flip lid allows one-handed access during busy service, making it a practical choice for high-traffic areas such as breakfast stations, buffet counters, and dry goods prep sections.

In day-to-day kitchen use, the bin works well for cereals, grains, pulses, flour, sugar, and similar dry ingredients. The flip-lid design reduces the risk of contamination compared to open containers, and the polypropylene construction is robust enough to withstand regular handling in a professional environment.

• Flip lid allows quick, one-handed access during service
• Polypropylene construction is food-safe and dishwasher proof
• Suitable for dry ingredients, cereals, and bulk dispensing
• Lightweight enough to move and reposition easily on counters
• Smooth interior surfaces support straightforward cleaning

Being dishwasher safe simplifies the cleaning regime, which matters when bins are in daily use and need to be turned around quickly between services. The polypropylene material does not absorb odours or stains readily, which helps maintain hygiene standards over time.

This bin is best suited to lower-volume dry ingredient storage and counter-based dispensing rather than bulk storage of heavy goods. For operations needing larger capacity or a stackable system for back-of-house dry stores, it is worth considering a higher-capacity option from the range.

If you are building out a breakfast station or reorganising dry goods storage and are unsure which sizes and quantities would work best, we are happy to help you think it through.

This is a straightforward, practical dry goods storage bin designed for use in commercial preparation and dry store areas. The 65-litre polyethylene body is robust and food-safe, and the clear polycarbonate lid allows staff to identify contents at a glance without needing to open it — a small but useful advantage during a busy service. The lid can be slid or lifted for access depending on working preference.

Four heavy-duty castors make it easy to move the bin around the kitchen or back-of-house storage area, which is helpful when restocking prep stations or cleaning the floor beneath. The mobile design suits kitchens where ingredient access points shift depending on the prep task in hand.

In practical terms, this bin works well for flour, sugar, rice, pulses, and similar bulk dry ingredients. The polyethylene construction is easy to wipe down and resists the knocks and scrapes typical of a working kitchen environment. Being mobile, it also simplifies stock rotation and periodic deep cleaning.

• Clear lid allows contents identification without opening
• Mobile on four castors for repositioning around the kitchen
• Food-safe polyethylene body, straightforward to clean
• Lid slides or lifts for flexible access during prep

For sites handling very large volumes of dry ingredients, or where multiple bins are needed simultaneously across different sections, it is worth considering whether a higher-capacity unit would reduce the frequency of refilling. Equally, smaller operations may find a reduced-capacity bin better suited to their available floor space.

If you are unsure which size or configuration suits your kitchen layout, the team is happy to help you work it out.

This Araven ingredient bin is a 1/3 gastronorm-sized polypropylene container designed for ingredient storage and stock rotation in prep kitchens. The 7-litre capacity sits in a standard 1/3 GN footprint, making it straightforward to integrate into existing cold prep counters, bain maries, or racked storage systems.

The design supports FIFO (First In, First Out) rotation, which helps kitchen teams manage ingredient freshness and reduce waste without relying on labelling alone. Containers can be stacked while still allowing access to the contents below, which keeps prep workflows moving without the need to unstack and restack during service. Colour-coded clips are included, giving teams a practical way to differentiate contents or allergen categories at a glance.

Polypropylene is a practical choice for this application — it handles repeated dishwasher cycles reliably and resists staining from common prep ingredients. At 720g, the bin is light enough to handle easily during busy prep periods.

• FIFO clip system supports first-in, first-out stock rotation
• Stackable with accessible opening when bins are stacked
• Colour-coded clips aid ingredient identification and allergen management
• Dishwasher safe for straightforward end-of-service cleaning
• Standard 1/3 GN footprint fits existing gastronorm storage systems

This bin is well suited to prep kitchens of most sizes — from smaller independents through to larger operations running high-volume ingredient throughput. If your site requires a higher-capacity container or a full set of matching sizes across GN fractions, it's worth talking through the options before ordering.

If you're building out or refreshing a prep storage system and want to make sure the sizing works for your setup, the team is happy to help.

The Araven mobile ingredient bin is a bulk dry goods storage container made from food-safe polyethylene. The body and lid are fully transparent, so kitchen staff can identify contents at a glance without lifting the lid or relying on labelling alone. Four castors allow the bin to be repositioned freely around a kitchen or storeroom — useful when the container is carrying a full load of flour, rice, sugar, or similar ingredients.

In practice, these bins are most commonly found in bakeries, prep kitchens, and catering operations where bulk dry ingredients are drawn down steadily throughout a shift. The secure-fitting lid keeps contents protected from airborne contaminants and helps maintain freshness between uses. Because both body and lid are clear, the risk of contents being overlooked during stock rotation is reduced — staff can see at a glance what's running low without opening every container.

• Transparent body and lid for instant visual identification of contents
• Four castors allow repositioning without lifting a fully loaded bin
• Secure lid protects contents from contamination between uses
• Food-safe polyethylene construction suited to daily commercial use
• Straightforward to clean and compliant with food-safe material requirements

At 80 litres, this bin suits kitchens buying in volume who need accessible, mobile storage without committing to larger fixed installations. It works well as a single-ingredient container or as part of a standardised storage system across a kitchen fitout. For sites handling significantly larger volumes in a single container, a higher-capacity option may be worth considering.

If you're fitting out a new kitchen or trying to standardise dry goods storage across a site, the team is happy to help you work out what sizes and quantities would suit your operation.

The Vogue 38-litre ingredient bin is a straightforward, food-grade storage container designed for holding dry goods such as flour, sugar, rice, and similar bulk ingredients in a commercial kitchen environment. It comes supplied with a clip-on lid and is made from durable food-safe plastic throughout.

In day-to-day kitchen use, a container of this size works well for sites that go through moderate volumes of a given ingredient — enough capacity to avoid constant restocking, but manageable enough to lift, move, and pour from without difficulty. The smooth interior makes both portioning and cleaning quicker, which matters during busy prep and at the end of service.

From a practical standpoint, the bin offers a few straightforward operational advantages:

• Clip-on lid helps protect contents from contamination and moisture between uses
• Smooth interior reduces product build-up and speeds up cleaning
• Moulded side handles make lifting and repositioning more manageable
• Compact footprint suits under-table storage or shelving, keeping worktops clear
• Food-safe plastic construction is suitable for direct contact with dry foodstuffs

There are no installation requirements — the bin is ready to use as delivered. It is worth considering where it will be stored and how frequently it will need moving, as a full 38-litre bin of a dense ingredient such as flour will carry some weight. For sites with very high throughput of a single dry ingredient, a larger-capacity bin may be more practical; for smaller operations or less frequently used goods, a smaller size may be the better fit.

This bin is a practical choice for bakeries, pastry sections, restaurant prep kitchens, and catering operations where organised, hygienic dry goods storage is a daily need. If you are unsure which size or quantity best suits your storage setup, the team is happy to help you work that out.

The Vogue 81-litre ingredient bin is a straightforward, practical storage solution for bulk dry goods — flour, sugar, rice, grains, and similar commodities used in volume. It is made from food-grade plastic and comes with a matching scoop and a clear sliding lid, giving kitchen and bakery teams a contained, accessible way to manage high-turnover ingredients at the point of use.

In busy preparation environments, the value of a well-positioned ingredient bin is largely about reducing unnecessary movement. A large-capacity bin positioned at a workstation means staff spend less time making trips to dry stores and more time on productive prep. The clear lid allows a quick stock-level check without lifting or disturbing the contents, which is a small but useful time-saver during a busy service build-up.

From a hygiene and maintenance standpoint, the smooth interior walls are straightforward to wipe down, supporting HACCP cleaning routines without complication. The sliding lid limits airborne contamination and helps maintain ingredient freshness during open kitchen conditions.

• Food-grade plastic construction suitable for direct dry goods contact
• Included scoop supports accurate, consistent portioning
• Clear sliding lid for stock visibility without opening
• Smooth internal surfaces wipe clean quickly
• Large opening allows easy access during high-demand prep periods

This size is well suited to medium and high-volume kitchens, bakeries, and catering operations where a single ingredient is used in significant quantity on a daily basis. For very high-throughput sites running multiple preparation lines, it may be worth considering whether a heavier-duty or larger-format storage solution would serve better.

If you are unsure which size or configuration fits your prep workflow, we are happy to talk it through.

The Vogue 7.5Ltr Ingredient Bin is a straightforward dry-ingredient storage container designed for use on prep tables, shelving, or countertop stations. It holds commonly used dry goods — spices, flours, raising agents, breadcrumbs, and similar ingredients — and keeps them accessible during service without taking up excessive space.

In a working kitchen environment, the practical value of a well-organised mise en place is easy to underestimate. A container like this earns its place by keeping dry ingredients close to hand, clearly contained, and protected from moisture and cross-contamination between uses. The tight-fitting lid is particularly useful overnight or between services when ingredients might otherwise absorb ambient moisture or pick up odours.

Key practical points worth noting:

• Food-safe plastic construction wipes clean quickly between ingredient changes
• Lid included as standard — helps protect contents between services
• Lightweight build makes repositioning on a busy prep station straightforward
• Smooth interior minimises residue build-up and speeds cleaning
• Compact footprint suits space-limited prep areas and shelving runs

There are no installation requirements — this is a standalone, portable container. At 7.5 litres it suits lower-volume or small-batch operations, or kitchens using multiple bins to segregate different dry goods. For sites with higher throughput needs or bulk ingredient storage, larger-capacity options are available in the range.

This bin is a practical choice for bakeries, pastry sections, prep kitchens, and any station where quick access to dry ingredients supports workflow. If you're fitting out a prep area and want to discuss how best to organise your dry storage, we're happy to help.

The Vogue 18-litre ingredient bin is a straightforward dry goods storage solution made from food-grade plastic. It is designed to hold frequently used staples such as flour, sugar, rice, and oats, keeping them contained, protected, and accessible throughout a busy prep shift. The clip-on lid keeps contents sealed against moisture, airborne contamination, and pests between uses.

In a working kitchen environment, the practical value of a well-designed ingredient bin comes down to hygiene and workflow. The smooth interior surfaces wipe down quickly at the end of service, and the food-grade construction means direct ingredient contact is safe without additional lining. The lightweight build allows staff to lift, pour, and refill without difficulty, which matters when a bin is being reached for repeatedly across a shift.

• Food-grade plastic construction safe for direct ingredient contact
• Clip-on lid protects contents between uses and during storage
• Smooth interior cleans quickly with minimal effort
• Compact footprint suits shelf or under-bench placement
• Lightweight enough for repeated handling without strain

This bin is well suited to bakery prep areas, pastry sections, and general food prep kitchens where dry goods are used in volume on a daily basis. It works comfortably on open shelving or beneath prep benches where space is limited. For operations running very high throughput or storing larger batch quantities, a higher-capacity bin may be worth considering alongside this size.

If you are equipping a new prep area or replacing existing storage and want to talk through what capacity and quantity would suit your setup, the team is happy to help.

This polypropylene lid is designed as a compatible cover for Vogue's heavy-duty round ingredient bins. It provides a straightforward way to keep dry goods, ingredients, and bulk foodstuffs protected from contamination, pests, and moisture during storage and service.

In a working kitchen environment, uncovered ingredient bins are a hygiene risk and a common cause of food waste. A properly fitting lid helps maintain ingredient quality between service periods and supports compliance with food hygiene standards. The polypropylene construction is practical for daily kitchen use — it resists moisture, is easy to wipe down, and holds up well under the routine handling that comes with busy prep areas.

• Keeps stored ingredients protected from airborne contamination
• Polypropylene surface is straightforward to clean and sanitise
• Lightweight enough for frequent handling during service
• Designed to fit securely on compatible Vogue round bins

It is worth confirming compatibility with your existing bin before ordering, as Vogue produce round bins in more than one size. This lid is sized for the corresponding bin in the range — if you are unsure which bin you have, our team can help confirm the right match.

If you have any questions about compatibility or whether this fits your current setup, feel free to get in touch before placing an order.

This Vogue ingredient bin is a large-capacity storage container designed for bulk dry goods such as flour, sugar, rice, and grains. It comes supplied with a sliding clear lid and a scoop, making it a practical all-in-one solution for prep areas and dry stores where ingredients need to be kept accessible, protected, and portioned cleanly.

In a busy kitchen environment, having bulk ingredients immediately to hand reduces unnecessary trips to back-of-house storage and keeps prep moving at pace. The clear lid allows staff to check stock levels at a glance without removing the cover, which helps with ordering and minimises contamination risk during service. The smooth interior walls make cleaning straightforward, and the open access design suits kitchens working with loose dry goods that are replenished regularly throughout the day.

• Supplied with scoop for clean, controlled portioning at the prep station
• Clear sliding lid provides visibility while keeping contents protected
• Smooth-walled interior simplifies cleaning and reduces residue build-up
• Suitable for dry stores, ambient prep areas, and cold room environments
• Generous opening reduces scooping awkwardness during high-volume prep

The bin is suitable for floor or low-shelf placement given its footprint and capacity. It is best used in ambient dry storage or ambient prep areas. It is not intended for refrigerated wet goods or liquids. If your operation runs through very high volumes of multiple dry ingredients, it may be worth considering whether a smaller secondary bin alongside would better suit portioned prep stations, or whether a larger freestanding unit is more appropriate for your throughput.

If you are unsure which size or configuration best suits your prep setup, our team is happy to help you think it through before you order.

This is a replacement lid designed to fit Vogue's large polypropylene round ingredient bins. Made from food-safe polypropylene, it provides a close-fitting cover to keep dry goods, flour, sugar, rice, and similar bulk ingredients protected from contamination and moisture during storage.

In a working kitchen, ingredient bins without lids are a hygiene risk — dust, debris, and pests can compromise stored goods quickly. A well-fitting lid reduces that risk and helps kitchens maintain the standards expected during environmental health inspections. This lid is also useful in high-footfall prep areas where ingredients may be disturbed by air movement or nearby activity.

• Food-safe polypropylene construction — easy to wipe clean and dishwasher safe
• Designed to fit securely on the corresponding large round bin
• Helps protect dry goods from contamination and moisture
• Lightweight and straightforward to remove during active service
• Supports good hygiene practice in dry goods storage areas

This lid is a direct replacement or spare part, intended specifically for the large variant of Vogue's polypropylene round bin. If you're unsure whether this fits your existing bin, or if you need lids for multiple bin sizes, it's worth checking with us before ordering — we're happy to help match the right lid to your current setup.