Kitchenaid

The KitchenAid Heavy Duty Bowl-Lift Stand Mixer is a countertop planetary mixer designed for consistent, repeated mixing tasks in a professional kitchen environment. The bowl-lift mechanism locks the 6.6-litre bowl firmly in place during operation, which makes it significantly more stable than a tilt-head design when working with stiff doughs, dense batters, or larger batch preparations.

In daily kitchen use, the planetary mixing action — where the attachment orbits the bowl rather than simply spinning in place — gives thorough coverage across the full bowl volume. This reduces the need to stop and scrape down between cycles, which matters when prep time is tight. The 11-speed range provides practical control across a broad range of tasks, from slow fold-ins through to rapid aeration for meringues or whipped preparations. A soft-start function helps prevent ingredients from being thrown from the bowl when beginning at higher speeds, which is a useful detail in a busy prep environment.

• Planetary action delivers thorough coverage across the full bowl volume
• Bowl-lift design handles heavy, stiff loads without straining the mechanism
• 11-speed range suits dough, batter, and aeration tasks in a single machine
• Soft-start reduces spillage at the start of each mixing cycle
• Die-cast metal zinc construction supports sustained daily use

This is a countertop unit requiring no fixed installation — it runs from a standard mains socket and can be repositioned as needed. It is worth being clear that this is not a floor-standing commercial planetary mixer, and operators running very high daily batch volumes should consider whether a larger-capacity or heavier-duty machine would better match their throughput requirements.

This mixer is well suited to small professional kitchens, hotel prep areas, patisserie and bakery operations, culinary schools, and catering businesses where reliable daily mixing is needed but volumes do not justify a full commercial floor-standing unit.

If you want to talk through whether this capacity suits your prep volumes, or how it sits alongside other options, the team is glad to help before you commit.

The KitchenAid 5KHM6118BOB is a compact, lightweight handheld mixer designed for small-batch mixing tasks. Six speed settings allow operators to move between gentle folding and more active beating, while the included flex edge beaters are shaped to work closer to the bowl wall, reducing how often you need to stop and scrape down during a mix.

In a commercial kitchen this sits firmly at the supplementary end of the spectrum. It handles tasks well where a full stand mixer would be unnecessary — whipping cream, mixing cake batters, blending lighter sauces, or quickly incorporating ingredients during prep. The soft-start function is a practical detail, reducing the scatter that comes from going straight to speed on loose ingredients. At 900g it is easy to handle over extended prep sessions without fatigue.

Practical points worth noting before buying:

• Six speed settings give useful control across light to moderate mixing tasks
• Flex edge beaters reduce the need to stop and scrape between passes
• Soft-start reduces splash and ingredient scatter on startup
• Lightweight plastic construction keeps the unit manageable for handheld use
• Compact footprint makes storage straightforward in space-limited kitchens

It is important to be honest about what this unit is not. It is a domestic-grade appliance and is not designed for continuous use, dense doughs, or high-volume output. Relying on it as a primary mixing tool in a busy kitchen would be asking more of it than it is built to deliver. It works best as a secondary prep tool — useful in smaller cafés, front-of-house stations, or anywhere counter and storage space is tight.

If you are weighing this up against other options for your kitchen, we are happy to talk through what would realistically suit your prep volume.

The KitchenAid 5KSM7990XBER is a 6.9-litre countertop stand mixer built for regular production work in commercial kitchen environments. It uses planetary mixing action — the attachment rotates on its own axis while orbiting the bowl — which produces consistent, thorough mixing across the full bowl capacity. Ten speed settings give operators precise control across a broad range of preparation tasks, from slow-speed dough work through to high-speed aeration.

In a working kitchen, the all-metal construction and motor protection system make a meaningful difference during sustained daily use. The mixer handles repeated batch cycles without the overheating issues common in lighter semi-commercial machines, and the relatively quiet motor makes it practical in open kitchen or front-of-house settings where noise matters. It is well suited to dough, cake batter, cream, mash, meringue, and egg-based mixtures.

A few features are particularly relevant in a commercial preparation context:

• Planetary mixing action ensures even contact across the full bowl with no dead zones
• Pouring chute allows ingredients to be added mid-cycle without stopping the machine
• Automatic motor shutoff provides protection during overload conditions
• Stainless steel wire guard and emergency stop meet European Machinery Directive requirements
• Wide range of optional attachments available, including meat grinder, sausage stuffer, and strainer

Installation is uncomplicated. The mixer is a countertop unit requiring a standard mains supply and a stable, level work surface capable of supporting 13kg. No fixed installation or specialist connection is needed. Bench space should be assessed before ordering given the footprint, and the unit is not intended for floor mounting or continuous automated production-line operation.

This mixer is well suited to small bakeries, hotel and restaurant pastry sections, catering operations, and similar sites where a reliable, versatile bench mixer is needed for regular batch work at moderate volumes. For kitchens with significantly higher daily throughput or near-continuous production demands, a larger-capacity model would be worth considering.

If you would like to talk through whether this model suits your workload or discuss the attachment range, the team is happy to help before you commit.

The KitchenAid Heavy Duty Stand Mixer is a bowl-lift planetary mixer built around a die-cast zinc body and all-metal gear train. It operates across 11 speeds with a soft-start function that ramps up gradually, which keeps flour and dry ingredients in the bowl rather than across the worktop. The 5.2-litre capacity suits medium batch sizes across a range of mixing tasks including dough, batter, cream, and cake mixes.

In practice, this mixer is best understood as a high-quality professional-grade unit rather than a full commercial mixer. It handles regular, consistent use well and the all-metal construction gives it durability beyond a domestic appliance, but operators running continuous high-volume production should be aware that its 375W motor is sized for quality rather than sustained heavy throughput. For light-to-moderate production kitchens, cookery schools, development kitchens, and hospitality businesses with focused baking output, it performs reliably and consistently.

Practical advantages for kitchen operators include:

• Soft-start function reduces mess and ingredient loss at the start of each mix cycle
• All-metal gears and die-cast zinc body offer durability well above domestic-grade mixers
• 11-speed range gives genuine flexibility across different mixing tasks and ingredient types
• High-heat cut-off provides a degree of motor protection during extended use
• Bowl-lift design keeps the bowl stable and well-positioned throughout the mixing cycle

Installation is straightforward — this is a countertop unit requiring only a standard 13-amp socket. At 12.7kg it is reasonably substantial, so a stable, dedicated worktop position is sensible. No additional ventilation, plumbing, or extraction is required. The Contour Silver finish is hardwearing and easy to wipe down between uses.

This mixer is well suited to hotel kitchens, small bakeries, cookery schools, and restaurant operations where mixing forms part of a broader workflow rather than the primary production activity. For sites where a stand mixer is in near-continuous use throughout service, a higher-capacity commercial unit with a larger motor would be worth considering.

If you're weighing this up against other options or want to check it's the right fit for your kitchen's output, the team is happy to talk it through with you.

The KitchenAid 8 Cup Batter Bowl is a straightforward measuring and mixing bowl intended for accurate preparation of wet and dry ingredients. Made from BPA-free plastic, it holds 1.9 litres and carries measurement markings in both half-litre and US cup increments on the interior, allowing quantities to be read directly in the bowl without transferring to a separate measure.

In a busy prep kitchen, small details matter. The non-slip base keeps the bowl steady on a work surface during mixing, and the integrated spout allows controlled, mess-free pouring directly from the bowl into tins, pans, or jugs. The non-slip handle gives a confident grip when the bowl is full, which is a practical consideration when moving between stations or pouring over a hot surface.

• Dual measurement markings in half-litres and US cups for versatile prep work
• Integrated spout for controlled, drip-free pouring
• Non-slip base and handle for stability in use
• BPA-free plastic construction — food safe
• Dishwasher safe for straightforward end-of-service cleaning

This bowl is suited to bakery prep, pastry sections, or any kitchen where batter, liquid mixes, or measured dry ingredients are handled regularly. Its compact size makes it practical for smaller-batch work rather than high-volume production; for larger batch prep, a bigger-capacity bowl would be more appropriate.

If you're building out a prep station and want to make sure you have the right sizes and quantities to hand, the team is happy to help you work through what's needed.

The KitchenAid Heavy Duty Stand Mixer is a bowl-lift mixer built for consistent, repeated use in professional food preparation environments. With a die-cast zinc body and all-metal gear train, it is designed to handle demanding mixing tasks — from stiff bread doughs to large batches of batter or cream — without the mechanical wear that affects lighter domestic models.

In a working kitchen, durability and consistency matter more than headline specifications. The all-metal construction means this mixer holds up under daily use, and the 11-speed range gives operators genuine control over mixing intensity for different ingredients and preparation stages. The soft-start function reduces the risk of flour clouds or splash at the beginning of a mix cycle, which is a practical consideration in any prep kitchen where cleanliness and speed matter.

Key operational advantages include:

• All-metal gears and die-cast zinc body for long-term durability under regular use
• 11-speed control suited to a wide range of mixing tasks in one machine
• Soft-start feature reduces mess at the start of each cycle
• Bowl-lift design provides stable support for heavier mixes
• High-heat cut-off for safe continuous operation during busy prep periods

Installation is straightforward — this is a countertop unit that requires only a standard 13-amp socket and adequate worktop space. At 12.7kg it is substantial enough to stay stable during heavy dough mixing, but light enough to be repositioned as needed. No specialist installation is required, though it is worth confirming your worktop can comfortably accommodate the footprint before ordering.

This mixer is well suited to small bakeries, café kitchens, patisseries, and prep kitchens with moderate daily mixing volumes. It performs reliably for operations that need a capable, professional-grade mixer without the scale of a floor-standing planetary or spiral machine. If your kitchen runs very high volumes of dough or requires continuous batch mixing throughout service, a larger-capacity machine would be worth considering.

If you are unsure whether this model matches your prep volumes or mixing requirements, the team is happy to talk it through with you.

The KitchenAid Heavy Duty Bowl-Lift Stand Mixer is a countertop planetary mixer built for consistent, repeat mixing tasks in professional and semi-professional kitchens. The bowl-lift mechanism secures the bowl in a raised, locked position during operation — a practical advantage over tilt-head designs when working with heavier doughs or larger batch volumes, as it keeps the bowl stable throughout the mixing cycle. The die-cast metal zinc body gives the machine a solid, grounded footprint that does not shift or rock under load.

Across an 11-speed range, the motor handles the variety of tasks that small to medium prep sections encounter regularly — bread and pastry doughs, cake batters, whipped creams, and meringues. The planetary mixing action means the attachment travels the full circumference of the bowl with each pass, which reduces the need to stop and scrape down manually. A soft-start function brings the mixer up to speed gradually, helping to prevent flour clouds and batter splash at the beginning of a mix — a small but meaningful detail in a working kitchen.

Practical advantages for kitchen operators include:

• Bowl-lift design keeps heavier doughs stable during mixing without rocking
• Full planetary action reduces manual scraping and intervention between cycles
• Soft-start minimises mess and ingredient loss at the start of each mix
• Die-cast metal zinc construction handles regular daily use reliably
• Relatively quiet running, which helps in open or pass-through kitchen environments

At 15.2kg, this is a substantial piece of countertop equipment. It will need a dedicated, stable worksurface with sufficient clearance above the bowl for removal and loading. It runs from a standard single-phase supply, so no specialist electrical installation is required, and there are no water or gas connections involved. Counter depth is worth considering when positioning it permanently, particularly in tighter prep areas.

This mixer is well suited to patisseries, small bakeries, hotel kitchen prep sections, and catering operations where consistent batch preparation is required but the volumes do not justify a full floor-standing commercial mixer. If your operation involves continuous high-volume dough production across multiple shifts, a larger-capacity machine is likely to be a more appropriate long-term investment. For lighter or occasional use, a smaller-bowl model may be more proportionate.

If you are weighing up whether this capacity fits your prep volumes, or want to talk through how it sits within your existing counter layout, the team is glad to help before you make a decision.

The KitchenAid Classic 5-Speed Hand Mixer (5KHM5110BWH) is a compact, lightweight electric hand mixer designed for straightforward mixing tasks. It features a five-speed mechanical control that moves between a slow stir and a fast whip, giving the operator direct, immediate adjustment without digital menus or complicated settings. The white plastic body is light enough to handle comfortably for extended periods.

In practice, this mixer handles everyday tasks such as whipping cream, beating eggs, and mixing lighter batters reliably. The graduated speed range helps reduce splatter when starting with dry or loose ingredients, which is a practical consideration in any kitchen environment. It is not intended for heavy, continuous-duty work such as stiff dough or high-volume production runs — for those applications, a stand mixer or a more powerful bench unit would be the appropriate choice.

The key practical advantages for catering use include:

• Five mechanical speeds allow quick adjustment between tasks without interrupting workflow
• Lightweight build reduces fatigue during repeated short mixing tasks
• Simple design with minimal components keeps day-to-day cleaning straightforward
• Compact form takes up minimal storage space between uses

There are no specialist installation requirements — the mixer operates from a standard 13A socket. It is best suited to low-to-medium volume environments such as small cafés, B&Bs, pub kitchens, or hospitality suites where hand mixing tasks arise regularly but do not dominate production. It is not well suited to a high-throughput pastry or bakery operation where a heavier-duty bench or stand mixer would better match the workload.

If you are unsure whether this mixer matches your volume or intended use, we are happy to talk it through before you order.

The KitchenAid Professional Stand Mixer is a ten-speed planetary mixer built for consistent, reliable mixing across a broad range of kitchen preparations. The 6.9-litre stainless steel bowl and direct-drive motor handle everything from stiff enriched doughs and dense cake batters through to whipped creams and mashed potato, without the strain that underpowered domestic machines show under repeated daily use.

In a working kitchen environment, the planetary action ensures thorough, even ingredient incorporation across the full bowl, reducing the need to stop and scrape mid-mix. The ten-speed range gives operators genuine control at each stage — from slow initial incorporation of dry ingredients through to high-speed aeration — which matters when consistency across batches is non-negotiable. The machine handles back-to-back use through a prep session without overheating under typical catering loads, making it a reliable fixture in daily prep routines.

Practical advantages that operators tend to value include:

• Planetary mixing action for even incorporation without manual intervention
• Front-mounted hub with broad attachment compatibility — pasta rollers, meat grinders and more
• Steel wire bowl guard and pouring chute allow safe ingredient addition during operation
• Built-in emergency stop and automatic shutoff meeting European Machinery Directive requirements
• Stainless steel bowl is hygienic, robust and straightforward to clean between batches

Installation is simple. This is a countertop unit requiring only a standard mains supply and a stable work surface capable of supporting the machine's 13kg loaded weight. No specialist ventilation or plumbing is needed. It is worth checking available bench space before ordering, particularly in compact kitchens where counter space is shared across multiple tasks.

This mixer is well suited to bakeries, patisseries, hotel kitchens, and catering operations where regular mixing is part of daily prep but volumes do not justify a floor-standing machine. It is a practical choice for sites producing small to medium batch quantities consistently throughout the week. For higher-volume sites or operations running extended continuous mixing cycles, a heavier-duty floor-standing mixer is likely a more appropriate long-term investment.

If you are unsure whether the 6.9-litre capacity fits your prep volumes, or want to talk through how the attachment range might work within your kitchen setup, the team is happy to help before you commit.

The KitchenAid 5KSM70JPXBWH is a countertop bowl-lift stand mixer built around a die-cast metal zinc body and an 11-speed motor. The bowl-lift mechanism raises and locks the bowl securely into the mixing position, providing a stable platform particularly useful when working with stiffer doughs and larger batch weights. Planetary mixing action — where the attachment rotates on its own axis while orbiting the bowl — covers the full interior consistently without manual scraping.

In a working kitchen, this mixer handles the kind of preparations that form a daily prep routine: enriched and lean bread doughs, cake batters, whipped creams, meringues, and forcemeats. The soft-start function brings the motor up gradually, which keeps flour and lighter ingredients contained at the outset and makes for a tidier work area during busy prep. At the upper end of the speed range, the motor maintains torque through denser mixtures without the labouring or heat build-up that tends to shorten the working life of lighter machines pressed into professional use.

From a practical standpoint, the mixer offers several operational advantages worth noting:

• Die-cast metal zinc construction withstands regular daily use more reliably than plastic-bodied alternatives
• Soft-start reduces ingredient scatter and keeps the worktop cleaner during initial mixing
• Planetary action minimises the need to stop and scrape between cycles
• 11 speeds provide precise control across a broad range of mixing tasks
• Bowl-lift design maintains consistent contact between attachment and bowl content throughout

Setup is straightforward — this is a freestanding countertop unit requiring only a standard mains connection. At 15.2kg it is a solid machine, so bench position is worth planning in advance. The bowl-lift mechanism requires adequate overhead clearance when raising and lowering the bowl, so check the space above the intended counter position before installing.

This mixer is well suited to small professional kitchens, cafés, patisseries, and catering operations where batch mixing is a regular part of the prep routine but overall daily volume does not demand a floor-standing planetary machine. Operations running close to continuous mixing across a full shift, or producing very high batch volumes, may find a larger-capacity floor-standing model a better fit for that workload.

If you would like to talk through whether this capacity suits your prep volumes, or how it would sit alongside your current equipment, the team is glad to have that conversation.

The KitchenAid Heavy Duty Stand Mixer is a bowl-lift planetary mixer finished in Empire Red. It uses the standard planetary mixing action — the attachment orbits the bowl while rotating on its own axis — to give thorough, even coverage through the full volume of the bowl. It is designed to handle a range of mixing tasks from stiff doughs and pastry through to batters, cream, and egg-based preparations.

In a working kitchen environment, this mixer is best suited to moderate-volume prep. It performs well for daily bread and dough work in smaller bakeries, patisseries, or food-to-go operations where consistent batch output is needed but volumes do not demand continuous heavy industrial running. The all-metal gear train and metal body construction contribute to longer service life under regular use, and the soft-start function reduces ingredient scatter when starting with dry or light mixtures.

Practical day-to-day advantages for operators include:

• Eleven speed settings give control across delicate and heavy mixing tasks
• Bowl-lift design keeps the bowl stable and reduces movement during stiff dough work
• Full metal body and all-metal gears support durability under consistent daily use
• Soft-start function reduces mess and stress on ingredients at the start of a mix
• Accepts standard KitchenAid attachments, extending utility beyond mixing alone

This is a countertop unit and requires a sturdy, stable work surface with enough clear overhead height for the bowl-lift mechanism. It runs from a standard single-phase supply. No specialist installation is required, though operators should consider bench position in relation to workflow, as the footprint and lift height affect how easily the bowl is loaded and unloaded during a busy service prep period.

This mixer is a practical choice for smaller operations — independent cafés, boutique bakeries, hotel breakfast kitchens, or catering prep environments where daily mixing volumes are moderate. It is not intended for continuous high-volume production; kitchens running large or frequent batches throughout the day should consider a larger-capacity floor-standing planetary mixer better suited to that demand.

If you are weighing this up against your typical batch sizes or daily prep schedule, our team are happy to talk through whether the capacity and duty cycle are the right fit for your kitchen.

The KitchenAid Heavy Duty Stand Mixer is a planetary bowl-lift mixer designed for consistent, thorough mixing across a wide range of preparations — from enriched bread doughs and pastry to batters, creams and icings. The 5.2-litre bowl and full metal body construction give it a noticeably more substantial build than domestic-grade mixers, and the all-metal gear drive is intended to handle repeated, sustained use rather than occasional light work.

In practice, this mixer suits operations where mixing is a regular but not continuous part of the workflow — a busy café producing daily bake batches, a small hotel kitchen managing breakfast pastries, or a deli preparing sandwich fillings and dressings in volume. The 11-speed range gives operators useful control over delicate tasks such as whisking egg whites as well as the slower, steady pace needed for heavy dough work. The soft-start feature reduces the risk of ingredient scatter at the beginning of a mix cycle, which matters when working quickly during prep.

Practical advantages for day-to-day kitchen use include:

• All-metal gears and body construction for durability under regular use
• 11-speed range covering delicate whisking through to stiff dough
• Soft-start function reduces mess and ingredient loss at the start of a cycle
• Bowl-lift design provides stable support when working with heavier mixtures
• High-heat cut-off as a built-in safety measure during extended use

It is worth being clear about where this mixer sits in the broader market. It is a serious step above domestic equipment, but it is not a high-throughput commercial machine. Operations producing large daily volumes — a wholesale bakery, a high-output patisserie, or a central production kitchen — would likely find a larger-capacity planetary mixer with a more powerful motor a more practical long-term choice. For lower-volume sites where counter space is limited and mixing is one of several tasks rather than the primary focus, this machine is well suited.

Installation is straightforward — this is a countertop unit requiring a standard 13-amp socket, with no specialist fitting needed. The matte black finish is a practical choice in kitchen environments where fingermarks and light surface marks are a daily reality on equipment.

If you are weighing this up against other options or want to talk through what volume of production it would realistically support in your kitchen, the team is happy to help you think it through before you commit.

The KitchenAid Core Pasta Fork is a straightforward serving and draining tool designed for everyday pasta service. The tined head allows pasta to be lifted, separated, and portioned cleanly from the pan, while the elongated handle keeps hands clear of heat during service.

It is heat resistant to 232°C, making it suitable for use over active hobs, and the material is safe to use with non-stick cookware without risk of surface damage. For kitchens running pasta dishes through a busy service period, having a dedicated, reliable fork to hand makes plating more consistent and reduces the chance of awkward handling with general utensils.

• Safe for use with non-stick pans and coatings
• Heat-resistant construction for use over active hobs
• Dishwasher-safe for straightforward end-of-service cleaning
• Hanging loop for easy storage on a utensil rail

This is a light-duty smallware suited to lower-volume operations, café kitchens, or as a supplementary utensil where pasta features regularly on the menu. It is not designed for the sustained throughput demands of a high-volume pasta station — operators running high covers may want to consider a heavier-gauge professional utensil built for that kind of daily use.

If you are putting together a utensil set and want a steer on what suits your kitchen's volume and workflow, the team is happy to help.

The KitchenAid 5KSMFPPC is an attachment pack designed for use with compatible KitchenAid universal stand mixers. It bundles three accessories — references J501, AD296, and F661 — into a single pack, extending the functionality of the host machine for food preparation tasks beyond basic mixing.

KitchenAid stand mixers are well established in lighter commercial and semi-professional settings, including patisseries, bakeries, small hotels, and catering operations where versatile food prep is needed alongside a relatively compact footprint. Attachment packs like this one allow operators to broaden what their existing machine can do without investing in separate single-purpose equipment.

Without full specification data available for each individual attachment in this pack, we would recommend confirming the precise function of each component — J501, AD296, and F661 — before purchasing, to ensure they meet your intended prep requirements. Compatibility is confirmed for a specific range of KitchenAid universal mixer models, so verifying your machine's model number prior to ordering is important.

If you're unsure whether this pack is the right fit for your mixer or your kitchen's prep workload, our team is happy to help you work through the options.

The KitchenAid 5KFE5T is a coated flat beater with a flexible silicone edge, designed as a direct replacement or supplementary attachment for KitchenAid 4.8-litre stand mixers, including the Artisan (5KSM175) and the J400 (5KSM4050). It performs the same core function as the standard flat beater — creaming, combining, and general mixing — with the addition of a pliable edge that continuously sweeps the bowl wall as the attachment rotates.

In a professional prep environment, the practical difference is reduced stopping time. With a standard beater, operators typically need to pause the machine and scrape the bowl by hand to bring ingredients back into the mixing zone. The flexible edge does much of that work passively, keeping ingredients in contact with the beater throughout the cycle. For tasks like creaming butter, mixing pastry dough, or incorporating thick batters, this translates directly into more consistent results and fewer interruptions during a busy prep session.

• Reduces manual bowl scraping during mixing cycles
• Coated metal construction is gentle on bowl surfaces
• Flexible edge maintains contact with bowl wall throughout rotation
• Suitable for creaming, combining, and incorporating thicker mixtures
• Compatible with KitchenAid 4.8L bowl-lift and tilt-head models including the J400

This attachment fits the 4.8-litre bowl size. It is not compatible with the larger 6.9-litre or smaller 3.3-litre KitchenAid bowls, so it is worth confirming your mixer model before ordering. If your kitchen runs a higher-capacity mixer, a compatible beater sized for that bowl will be needed instead.

The 5KFE5T is a practical choice for patisserie sections, deli prep, hotel kitchens, and any environment where a KitchenAid 4.8L mixer is already in use and operator efficiency during prep matters. If you are unsure whether this attachment suits your specific mixer model, we are happy to confirm compatibility before you order.

The KitchenAid 5K7FB is a nylon coated flat beater designed to fit KitchenAid 6.9 litre stand mixers, including models CA986, CA987, CA988, CB575, CB576, and CB577. The nylon coating on the beater arms prevents metal-on-metal contact with the bowl, which helps preserve the bowl's finish over time and reduces the risk of marking or scratching during use.

The flat beater is the workhorse attachment for most everyday mixing tasks — combining cake batters, creaming butter and sugar, incorporating pastry mixes, and preparing mashed or bound fillings. It is the attachment that gets the most use in a typical pastry section or prep kitchen, so having a reliable spare or replacement on hand is a sensible precaution.

A few practical points worth considering before ordering:

• Designed specifically for KitchenAid 6.9 litre bowl-lift models — not compatible with smaller tilt-head machines
• The nylon coating is not rated for high-temperature dishwasher cycles; hand washing prolongs service life
• Suitable as a direct replacement for a worn or damaged beater, or as a second unit where mixers are in continuous use
• Part reference 5K7FB is the correct identifier to confirm compatibility with your specific model

This is a straightforward replacement part, but compatibility with your exact mixer model is worth confirming before purchase — particularly if you are working with older machines where model references can vary. If you are unsure which attachment suits your setup, our team is happy to help.

The KitchenAid Flex Edge Beater (ref 5KFE7T) is a replacement and upgrade beater designed for use with compatible KitchenAid 6.9-litre bowl-lift stand mixers. It combines a standard flat beater with a flexible silicone edge that continuously scrapes the bowl wall as the attachment rotates, reducing the need to stop and scrape down manually during mixing.

In a working kitchen environment, the practical value is straightforward: ingredients that would otherwise cling to the sides of the bowl — butter, cream cheese, thick batters, ganache — are incorporated more consistently without operator intervention. This supports a more even mix and reduces the risk of undermixed pockets in the final product, which matters when producing pastry, cake batters, or buttercreams at volume.

• Scrapes the bowl continuously during mixing, reducing manual intervention
• Suitable for thick, sticky mixtures that tend to cling to bowl walls
• Helps achieve a more consistent mix with less monitoring required
• Reduces preparation time across repeated batching
• Compatible with KitchenAid bowl-lift models fitted with the 6.9-litre bowl

This beater is an attachment, not a standalone piece of equipment. It is only compatible with specific KitchenAid bowl-lift mixer models — including those referenced as CA986, CA987, CA988, CB575, CB576, and CB577 — and will not fit tilt-head machines or smaller bowl configurations. If you are unsure which bowl size or mixer model you have, it is worth confirming compatibility before ordering.

This attachment suits bakeries, pastry sections, and prep kitchens using KitchenAid bowl-lift mixers where consistent incorporation of dense or sticky ingredients is a regular requirement. It is a straightforward upgrade to an existing machine rather than a capacity increase.

If you are not certain which beater or attachment is right for your mixer, our team is happy to help you confirm the correct fit before you order.

The KitchenAid 5K7SFB is a flat beater attachment designed for use with KitchenAid's 6.9-litre commercial stand mixer bowl. The flat beater is the standard all-purpose attachment for mixing, combining, and incorporating ingredients that do not require aeration — covering a broad range of pastry, dough, and preparation tasks that form the backbone of most production kitchens.

In a working kitchen environment, the flat beater handles everyday tasks reliably: creaming butter and sugar, mixing shortcrust and biscuit doughs, incorporating cake batters, and blending stuffings or mashed preparations. It is the attachment that most operators reach for first, and having a spare in service is a practical consideration for any site running the mixer through continuous shifts.

• Suitable for mixing, combining, and blending medium to heavy consistencies
• Designed to work in contact with the full bowl capacity without overreaching
• Compatible with KitchenAid mixer models CA986, CA987, CA988, CB575, CB576, and CB577
• Genuine KitchenAid replacement part, ensuring correct fit and balance

Before ordering, it is worth confirming your mixer's model reference against the compatibility list above. KitchenAid produces flat beaters across several bowl sizes, and fitting an incorrect beater can affect mixing performance and may place unnecessary strain on the machine head. If you are unsure of your model reference, it is usually printed on a label on the underside of the mixer head or on the original documentation.

This attachment is well suited to bakeries, hotel kitchens, and catering operations running a KitchenAid 6.9-litre mixer as part of their standard preparation workflow. If you are considering the mixer itself or are unsure which attachment best fits your production requirements, the team is happy to help you work through it.

The KitchenAid 5K7PS is a pouring shield designed for use with KitchenAid's 6.9-litre heavy duty stand mixer bowl. It fits directly onto the bowl rim and provides a guided opening through which dry or liquid ingredients can be added during mixing, helping to contain splashing and spillage without stopping the machine.

In a busy prep kitchen, adding ingredients mid-mix to an uncovered bowl is a straightforward way to create unnecessary mess and waste. The pouring shield addresses this practically — it stays in place during operation, so staff can introduce flour, liquids, or other additions steadily and with more control, while the mixer continues running. It is particularly useful during longer batch mixing tasks where ingredients need to be incorporated gradually.

• Sits securely on the 6.9L bowl rim during operation
• Guided feed opening for controlled ingredient addition
• Reduces splashing and ingredient waste at the bowl rim
• Allows hands-free ingredient pouring while the mixer runs
• Straightforward to fit, remove, and clean between uses

Installation is simply a matter of fitting the shield onto the correct bowl before use. Compatibility is specific — this shield is designed for the 6.9-litre bowl used with models including the 5KSM7591X range. It will not fit smaller KitchenAid bowl sizes, so it is worth confirming your mixer model before ordering.

This accessory suits any operation already running a compatible KitchenAid heavy duty mixer that regularly mixes in stages or incorporates ingredients progressively — bakeries, hotel kitchens, and catering prep units are typical users. If you are unsure whether this shield is the right fit for your mixer model, our team is happy to confirm compatibility before you order.

The KitchenAid 5K7EW is a genuine replacement and accessory wire whisk designed for use with compatible KitchenAid 6.9-litre bowl-lift stand mixers. It is the correct whisk attachment for models including CA986, CA987, CA988, CB575, CB576, and CB577, making it a straightforward like-for-like replacement or additional whisk for kitchens running multiple mixer bowls.

The wire whisk is the attachment of choice when incorporating air into ingredients — whipping cream, aerating egg whites, or producing light batters and mousses. In a busy pastry or prep section, having a dedicated whisk attachment ready to go avoids downtime between tasks and keeps prep moving during service build-up.

A few practical points worth noting: this whisk is sized specifically for the 6.9-litre bowl and will not fit smaller KitchenAid bowl configurations. If you are unsure which bowl size your mixer takes, checking the model reference against the compatibility list above before ordering will save time. Genuine attachments tend to hold their shape and wire tension better under repeated heavy use than aftermarket alternatives, which matters when consistent aeration results are important.

This attachment suits any kitchen already running a compatible KitchenAid 6.9-litre mixer — whether that is a hotel kitchen, catering college, restaurant pastry section, or a smaller contract caterer. If you are looking at attachments for a different bowl size or a different KitchenAid model entirely, it is worth confirming compatibility before purchasing.

If you are unsure whether this is the right whisk for your mixer, feel free to get in touch and we can confirm compatibility from your model number.

This is the nylon coated dough hook for KitchenAid's 6.9 litre bowl-lift stand mixer range. It is a genuine replacement and compatibility accessory, designed to fit the specific bowl and head geometry of compatible KitchenAid commercial mixer models including CA986, CA987, CA988, CB575, CB576, and CB577. If you are unsure whether your mixer falls within this range, checking the model reference on your machine before ordering is worthwhile.

The nylon coating on the hook serves a practical purpose: it reduces direct metal-to-metal contact with the mixing bowl during operation, which helps protect both the bowl surface and the hook itself during prolonged dough mixing cycles. For kitchens producing bread, pizza bases, or enriched doughs regularly, maintaining the correct hook in good condition keeps the mixer performing as intended and avoids unnecessary wear on the bowl.

Replacement hooks of this type are most commonly needed when an existing hook shows visible wear to the coating, has been lost, or when a second bowl setup is being assembled to improve production throughput. They are a straightforward like-for-like replacement with no adjustment required — the hook fits directly into the mixer's planetary drive in the same way as the original.

If you are unsure whether this hook is the correct fit for your machine, or if you are looking at accessories for a different KitchenAid mixer capacity, we are happy to help confirm compatibility before you order.

The KitchenAid 5K7SDH is the genuine dough hook attachment designed for use with KitchenAid's 6.9-litre bowl-lift stand mixers. It is the correct tool for working stiff and enriched doughs — bread, pizza, brioche and similar — where a flat beater or whisk attachment would be unsuitable. As a manufacturer-specified part, it is engineered to the tolerances of the mixer's planetary drive, ensuring proper engagement and consistent mixing action throughout the bowl.

In a working kitchen, this type of attachment earns its keep during morning prep runs where batch after batch of dough needs to be brought together reliably and without excessive hand labour. The planetary action of the mixer combined with the geometry of the hook works the dough evenly, developing gluten structure without operator intervention beyond loading and unloading. It is a straightforward, well-understood process that suits bakeries, hotel kitchens, restaurant prep sections, and similar environments where dough is mixed regularly but not necessarily at high industrial volume.

• Genuine manufacturer attachment — fits the drive correctly and maintains warranty compliance
• Suited to bread, pizza, enriched, and general yeast doughs
• Works within the planetary mixing action to reach all areas of the bowl
• Removes and reattaches quickly between batches
• Durable construction designed to handle repeated use under normal commercial prep conditions

This hook is a replacement or spare part rather than a standalone purchase, so confirming compatibility with your specific mixer model before ordering is worthwhile. If you are unsure which model you have or whether this hook is the right fit, the team is happy to help you confirm compatibility before you order.

This is the genuine KitchenAid stainless steel mixing bowl designed for use with KitchenAid bowl-lift stand mixers. The J-handle is a practical addition that makes it straightforward to seat and release the bowl from the lift mechanism, and also allows bowls to be stacked neatly during storage — a small but useful detail in a busy prep kitchen where bench space is rarely plentiful.

In a commercial or semi-professional setting, having a spare bowl ready to go can make a genuine difference to workflow. Rather than waiting for a batch to finish before scraping down and reloading, a second bowl allows prep to continue without interruption. The stainless steel construction cleans reliably and holds up well under regular use.

• Stainless steel construction — hygienic, durable, and easy to clean
• J-handle design simplifies bowl positioning and removal on the lift mechanism
• Stackable profile keeps storage tidy when multiple bowls are in use
• Genuine KitchenAid accessory, correctly sized for bowl-lift models

It is worth confirming compatibility before ordering. This bowl is designed for KitchenAid bowl-lift stand mixers but is not compatible with the 5KPM5 or 5KSM7990X models. If you are unsure which mixer you have, checking the model number on the base of the machine before purchasing is the simplest way to avoid a return.

This bowl is a sensible addition for any operation running a KitchenAid bowl-lift mixer that would benefit from a spare or replacement bowl — whether in a small bakery, a hotel kitchen, or a catering prep environment. If you are building out a KitchenAid accessory setup or are unsure whether this fits your specific model, feel free to get in touch and we can confirm compatibility before you order.

This is the genuine KitchenAid 6-wire whisk attachment, designed for use with KitchenAid bowl lift stand mixers. It fits the majority of bowl lift models, though it is not compatible with the 5KPM5 or 5KSM7990X — worth confirming your model before ordering.

The 6-wire configuration is well suited to tasks that require maximum aeration: whipping egg whites to stiff peaks, incorporating air into cream, producing light batters, and building volume in soufflé mixtures. The additional wires compared to a standard whisk attachment increase the number of contact points per rotation, which tends to give a faster, more consistent result for these kinds of preparations.

• Suited to meringues, mousses, whipped cream and light batters
• More aeration wires than the standard whisk for improved incorporation
• Genuine KitchenAid attachment for correct bowl lift fit and balance
• Easy to attach and remove from the mixer head
• Straightforward to clean, either by hand or in a commercial dishwasher

As a replacement or additional attachment, this whisk is most useful in patisserie, bakery, or prep kitchen settings where aerated mixtures are a regular part of the workflow. If your operation relies heavily on the bowl lift mixer for high-volume whipping tasks, having a spare whisk on hand is a practical consideration.

If you are unsure whether this fits your specific KitchenAid model, or if you are looking to put together a full set of attachments for a particular application, feel free to get in touch — we are happy to point you in the right direction.

The KitchenAid 5KDF7B is a silver-coated double flex edge beater designed as a direct replacement or additional attachment for KitchenAid bowl-lift stand mixers. It functions in the same way as a standard flat beater but incorporates two silicone edges — one along the side and one along the base — that make contact with the bowl wall and bottom as the beater rotates.

In a kitchen environment where a stand mixer is used repeatedly throughout service prep, the practical advantage of the flex edge design is that it reduces the need to stop the machine and scrape down the bowl by hand. Ingredients are folded back into the mix continuously, which helps achieve a more consistent result without additional intervention from the operator.

• Dual silicone edges scrape both the bowl sides and base simultaneously
• Reduces manual bowl scraping during mixing cycles
• Silver-coated construction for durability with regular commercial use
• Compatible with KitchenAid bowl-lift stand mixers (excluding the 5KPM5)
• Supports more consistent ingredient incorporation with less operator handling

It is worth confirming bowl-lift model compatibility before ordering, as this beater is not suitable for all KitchenAid mixer variants. The 5KDF7B is specifically designed for bowl-lift machines and will not fit tilt-head models.

This attachment suits kitchens already running a compatible KitchenAid bowl-lift mixer where the standard beater is in regular use and a flex edge option would improve workflow during prep. If you are unsure whether this fits your specific model, feel free to get in touch and we can confirm compatibility before you order.

The KitchenAid 5KSMBLWF is a genuine replacement and spare flat beater designed for use with KitchenAid bowl-lift stand mixers. It carries a white coating and is the standard paddle-style attachment used for mixing ingredients that are too heavy or dense for a whisk but do not require the folding action of a dough hook.

In a commercial or professional prep environment, flat beaters of this type are the workhorse attachment for everyday mixing tasks. They handle cake batters, cookie doughs, mashed potato, minced meat combinations, and similar medium-to-heavy mixtures reliably across repeated prep cycles. The white coating helps prevent the metal-on-metal contact that can discolour pale mixtures — a practical consideration when working with light-coloured batters or potato.

• Suited to cake batters, cookie doughs, and similar dense mixtures
• White coating reduces discolouration in pale ingredients
• Genuine KitchenAid accessory for consistent fit and performance
• Compatible with bowl-lift models — excludes the 5KPM5 and 5KSM7990X
• Straightforward to fit, remove, and clean between tasks

It is worth confirming your mixer model before ordering, as this beater is designed specifically for bowl-lift stand mixers and will not fit tilt-head models or the two excluded bowl-lift variants noted above. If you are unsure which attachment is correct for your machine, we are happy to help you check compatibility before you order.

The KitchenAid 5KSM1APC is a spiralizer attachment designed to fit the KitchenAid stand mixer hub, converting the mixer into a dedicated vegetable and fruit spiralizing tool. It works by feeding produce through a blade mechanism that cuts it into continuous ribbons, noodles, or spiral strips — a process that would otherwise require a separate countertop appliance or time-consuming knife work.

In a food preparation context, it is most commonly used for producing courgette noodles, cucumber ribbons, spiralised potato, and similar preparations that have become standard on menus catering to dietary preferences around reduced carbohydrate or gluten-free eating. Because it uses the existing mixer motor, throughput depends on the mixer model in use, but the attachment is suited to batch prep work rather than high-volume continuous production.

Practical advantages for operators using KitchenAid stand mixers include:

• Reduces prep time for spiralised vegetable dishes compared to manual cutting
• Consistent ribbon and noodle thickness across each batch
• No additional motor unit required — uses the existing mixer
• Compact storage when not in use
• Compatible across the KitchenAid stand mixer range

This attachment is best suited to smaller food service operations, cafés, and prep kitchens where KitchenAid stand mixers are already in use and spiralised vegetables appear occasionally on the menu. For operations preparing spiralised produce in larger volumes or as a core menu item, a dedicated commercial vegetable processing machine with continuous feed would be a more appropriate solution.

If you are unsure whether this attachment suits your prep workflow or existing equipment, we are happy to talk it through.

The KitchenAid Ice Cream Maker Attachment connects to compatible KitchenAid tilt-head stand mixers and allows operators to churn ice cream, sorbet, frozen yogurt and slushies directly using the mixer's existing drive. The bowl is pre-frozen before use, and the mixer's rotation drives the dasher to churn the mixture as it sets. No separate machine is required.

In practice, this attachment suits low-volume, on-demand frozen dessert preparation rather than continuous high-output service. It works well for small cafés, bed and breakfast operations, or hospitality settings where frozen desserts are prepared in modest batches ahead of service rather than churned continuously throughout the day. Recovery between batches requires the bowl to be re-frozen, so throughput is limited by that cycle.

The practical advantages for small-scale use include:

• Uses existing mixer investment — no additional countertop footprint
• Allows house-made frozen desserts without a dedicated ice cream machine
• Simple to clean between batches
• Straightforward to store when not in use

There are no special installation requirements — the attachment fits the standard power hub on compatible KitchenAid tilt-head mixers. Confirmed compatible models include the KitchenAid K45 Classic Tilt-Head Stand Mixer (4.3 litre, 5K45SSBWH / J400) and the KitchenAid Classic Tilt-Head Stand Mixer 4.3 litre (CX770). It is worth confirming compatibility before ordering if you are using a different KitchenAid model.

This attachment is best suited to small hospitality businesses or catering operations that want occasional frozen dessert capability without the cost or space commitment of a dedicated machine. For sites serving frozen desserts consistently through a busy service, a standalone countertop ice cream or sorbet machine would be a more practical solution.

If you are unsure whether this attachment will meet the demands of your service or want to explore whether a dedicated machine makes more sense for your setup, we are happy to talk it through.

The KitchenAid 5K5GB is a genuine manufacturer accessory — a 4.8-litre glass mixing bowl designed specifically for the KitchenAid Classic stand mixer (J400 series). It is a direct replacement or additional bowl for operators who want to work with multiple batches without stopping to wash up between mixes, or who prefer glass over stainless steel for certain ingredients.

In a working kitchen or bakery environment, the practical design details matter. The integrated handle makes it straightforward to carry a full bowl of batter or dough without awkward gripping, and the pouring spout allows measured transfer directly into tins or containers without needing a separate jug. The silicone lid helps contain ingredients during mixing and keeps contents covered during short rests or chilling periods, reducing the chance of surface contamination and limiting mess on the worktop.

• Fits KitchenAid Classic (J400) stand mixer directly
• Glass construction allows clear visibility of mix consistency
• Integrated handle for safe transfer of heavy batches
• Pouring spout for controlled, spill-free dispensing
• Silicone lid included for covering between mixing stages

Glass bowls are well suited to operations preparing pastry, ganache, or dressings where the operator benefits from seeing exactly what is happening inside the bowl throughout the process. Glass does not retain odours or discolour with acidic ingredients, which makes it a practical choice where the same bowl moves between sweet and savoury applications. It is worth noting that glass requires more care in handling than stainless steel and may not suit the fastest-paced, highest-volume environments where knock resistance is a priority.

This bowl suits smaller production kitchens, bakery counters, patisserie sections, and hospitality operations running a KitchenAid Classic mixer as part of their prep setup. If your output demands more frequent back-to-back batches, it may be worth looking at higher-capacity mixer options alongside additional bowls to keep production moving.

If you are unsure whether this bowl is compatible with your existing KitchenAid model, the team is happy to confirm before you order.

The KitchenAid 5FGA is a mincer attachment designed to fit the power hub on a range of KitchenAid stand mixers. It converts the mixer into a meat and food mincer, allowing operators to mince fresh meat, fish, and similar ingredients directly in the kitchen without the need for a separate freestanding machine.

In a commercial context, this type of attachment is typically used in smaller operations where mince volumes are moderate rather than continuous — a café kitchen producing fresh burger patties to order, a small restaurant mincing meat for sauces, or a catering prep kitchen handling limited runs. It draws on the mixer's existing motor, so throughput is naturally governed by the capacity and duty cycle of the host machine rather than a dedicated mincer.

Practical advantages for smaller operations include:

• Makes use of existing KitchenAid mixer investment without additional equipment outlay
• Straightforward to attach and remove between tasks
• Keeps prep compact in kitchens with limited bench space
• Suitable for fresh mince to order, reducing waste
• Easy to disassemble for cleaning and hygiene compliance

Compatibility covers a broad range of KitchenAid heavy duty, professional, and classic tilt-head stand mixers, including the 5KSM7591, 5KSM7990, 5KPM5, and K45 series. It is worth confirming your specific model code before ordering, as not every KitchenAid mixer accepts this attachment.

For kitchens mincing in higher volumes or on a continuous basis, a standalone electric mincer will generally be the more practical choice. This attachment is best suited to lower-volume prep where flexibility and space efficiency matter more than throughput.

If you are unsure whether this attachment suits your mixer model or your prep requirements, we are happy to help you work that out before you order.