Aluminium Pan Lids

This is a 240mm diameter aluminium lid from Pujadas, designed to sit within the Century aluminium cookware range. It functions as a straightforward heat-retention lid, keeping temperature stable during cooking and reducing moisture loss from pans and pots in active use.

In a busy kitchen environment, consistent heat retention matters — not just for food quality, but for fuel efficiency and service timing. A well-fitting lid reduces the energy needed to maintain temperature and helps kitchens keep pace during service without constant adjustment. Aluminium conducts heat evenly and responds quickly to temperature changes, which suits the pace of professional cooking well.

• Aluminium construction offers good thermal conductivity and even heat distribution
• Tubular stainless steel handles are designed to stay cooler during use, reducing burn risk
• Handles are secured with four rivets each, providing reliable attachment under daily commercial use
• Designed to complement the Pujadas Century aluminium cookware range

There are no electrical, gas, or water connections to consider. The lid is a passive piece of cookware, so suitability comes down to matching the diameter correctly to your existing pans and confirming compatibility with the Pujadas Century range if that is your current cookware. For kitchens running heavier stock pots or larger batch-cooking vessels, larger diameter lids are available within the same range.

This lid suits professional kitchens of most sizes — from small independent operations through to larger production environments — where the Pujadas Century aluminium range is already in use or being considered. It is a practical, everyday piece of kit rather than a specialist item.

If you are fitting out a new kitchen or standardising your cookware across a site, it is worth having a conversation with us to make sure you have the right sizes and quantities before ordering.

This is a straightforward aluminium lid sized at 280mm diameter, designed to pair with compatible pans in the Pujadas Century aluminium cookware range. It fits over the pan to retain heat and moisture during cooking, helping reduce energy use and maintain consistent temperatures through a service.

In a working kitchen, a well-fitted lid makes a practical difference — shorter bring-to-boil times, better heat retention between the stove and the pass, and less steam escaping into the kitchen environment. The aluminium construction conducts heat efficiently, and the material holds up well under the repetitive daily use typical of a busy kitchen. The tubular stainless steel handles are designed to stay cooler than the lid body, reducing the risk of burns during handling.

• Aluminium construction for good thermal conductivity and lightweight handling
• Tubular stainless steel handles reduce heat transfer and aid safe handling
• Four-rivet handle attachment for durability under repeated daily use
• Designed to complement Pujadas Century aluminium cookware

This lid is suitable for a wide range of commercial kitchen settings — from pub kitchens and cafés through to contract catering operations. It is a simple, practical accessory rather than a specialist item, and works best when matched to the correct pan diameter. If you are building out a set of Pujadas cookware or need guidance on compatible pan sizes, the team is happy to help you put the right pieces together.

This is a straightforward aluminium pan lid from Pujadas, sized at 320mm diameter to fit the corresponding pans in the Century aluminium cookware range. It serves the basic but important function of retaining heat during cooking, reducing moisture loss, and helping pots come up to temperature more efficiently during a busy service.

Aluminium conducts heat well and responds quickly to temperature changes, which suits the pace of a working kitchen where pots are on and off the heat throughout service. The lid is built to a practical thickness that resists the minor knocks and drops that are a routine part of kitchen life, and the stainless steel handles are designed to stay cooler than the body of the lid, reducing the risk of contact burns when lifting under pressure.

• Aluminium construction for good thermal conductivity and light handling
• Tubular stainless steel handles designed to minimise heat transfer to the grip
• Handles fixed with four rivets each for secure, long-term attachment
• Compatible with the Pujadas Century aluminium cookware range
• Recyclable material in line with kitchen sustainability considerations

This lid is a practical everyday item suited to any commercial kitchen already using Pujadas 320mm cookware — catering operations, pub kitchens, care homes, and similar environments where dependable, unfussy kit is needed. It is a single-size item, so kitchens running multiple pot sizes will need the corresponding lid for each diameter.

If you are equipping a kitchen from scratch or building out a cookware set, the team is happy to help you identify the right sizes and quantities for your operation.

This is a 350mm diameter aluminium lid from Pujadas, designed to fit within the Century aluminium cookware range. It functions as a straightforward heat-retention lid for use on pots and pans during cooking, holding temperature and reducing moisture loss during simmering, braising, and resting.

In a working kitchen, a well-fitting lid makes a practical difference — retaining heat means less energy is needed to maintain temperature, and covered pots recover more quickly after ingredients are added. Aluminium conducts heat efficiently, and the lid is constructed to sit flush and consistent, reducing the steam and heat loss that a poor-fitting lid allows. The stainless steel handles are tubular and heat-insulating, which matters when lids are being lifted repeatedly across a service period. Each handle is attached with four rivets, which is a more reliable fixing than the two-rivet fittings found on cheaper alternatives.

• Aluminium construction for good thermal conductivity and lightweight handling
• Heat-insulating tubular stainless steel handles reduce burn risk during service
• Four-rivet handle attachment for durability under repeated daily use
• Designed to complement Pujadas Century aluminium pans for a consistent fit

This lid is best suited to kitchens already using or intending to use Pujadas Century aluminium cookware. It is a practical everyday item rather than a universal fit — confirming compatibility with your existing pans before ordering is worthwhile. If you have questions about matching lids to pans across the range, the team is happy to help.

This is a 400mm diameter aluminium lid from Pujadas, designed to sit with their Century aluminium cookware range. It does what a good lid should do in a working kitchen: retain heat during cooking, reduce energy loss, and keep contents at temperature during short holding periods between service stages.

Aluminium conducts heat efficiently, which means the lid responds quickly to temperature changes rather than lagging behind. In a busy kitchen where pans move between heat sources and pass-through areas, that responsiveness helps maintain consistent cooking conditions without unnecessary energy use.

A few practical points worth noting:

• Aluminium construction gives good thermal conductivity with a relatively low weight
• Tubular stainless steel handles are designed to stay cooler during use, reducing burn risk
• Handles are fixed with four rivets each, which holds up better under the handling stress of a working kitchen
• The material is fully recyclable, which may be relevant for operators with sustainability procurement criteria

This lid is sized for use with 400mm diameter pans and is part of the Pujadas Century aluminium cookware system. If your kitchen uses a different pan diameter across your batterie, it is worth confirming compatibility before ordering, as lids are not universally interchangeable across sizes or manufacturers.

Suited to catering kitchens, pub kitchens, and hospitality operations already using or considering the Pujadas aluminium cookware range. For operations needing larger capacities or different pan formats, other sizes are available in the same range.

If you are building out a cookware set and want guidance on which sizes and configurations suit your menu and service volume, the team is happy to help you work through it.

This is a 450mm diameter aluminium lid from Pujadas, part of their Century aluminium cookware range. It is designed to sit on matching-diameter stockpots and saucepans, helping to retain heat during cooking, reduce evaporation, and cut energy consumption during long, slow processes such as stock-making or bulk simmering.

In a working kitchen, a well-fitted lid makes a practical difference during service. Heat is retained more consistently, which means less energy is needed to maintain temperature and recovery after adding cold ingredients is faster. The aluminium construction conducts heat evenly across the lid surface, reducing condensation hot spots that can cause uneven dripping back into the pan.

A few practical points worth noting:

• Aluminium construction gives good thermal conductivity without adding unnecessary weight
• Stainless steel tubular handles are designed to stay cooler to the touch during use
• Handles are secured with four rivets each, which helps maintain integrity under regular heavy-use conditions
• The lid is part of the Pujadas Century range, so it is designed to pair correctly with matching Century cookware
• Pure aluminium construction means it is fully recyclable at end of life

It is worth confirming the internal diameter of your existing pans before ordering, as lid fit tolerances on commercial cookware can vary between manufacturers. This lid is sized specifically for the Pujadas Century range and may not seat correctly on pots from other producers.

This lid is well suited to sites running Pujadas Century aluminium cookware — from hotel kitchens and contract catering operations to pub kitchens and staff restaurants where reliable, everyday cookware is in constant rotation. If you are building out a full set or are unsure about sizing across the range, the team are happy to help you work through what you need.

This is a 500mm diameter aluminium lid from Pujadas, designed to fit the corresponding pots within their Century aluminium cookware range. It functions as a straightforward heat-retention lid for large-capacity stockpots and similar vessels used in professional kitchen environments.

In a busy kitchen, keeping lids matched to their pans matters more than it might seem. A well-fitting lid holds heat in during long simmers, reduces moisture loss, and helps bring large volumes back to temperature more quickly after adding ingredients. For high-volume soup, stock, or sauce production, that consistency across service makes a practical difference to both energy use and output quality.

• Aluminium construction conducts heat evenly and keeps overall weight manageable
• Tubular stainless steel handles are designed to stay cooler during use, reducing the risk of burns
• Handles are secured with four rivets each, providing a stable and durable attachment under regular commercial use
• Suitable for use across gas, electric, and induction-compatible ranges when paired with appropriate cookware

Being aluminium, the lid is lighter than cast iron or stainless steel equivalents, which matters when kitchen staff are lifting covers repeatedly across a shift. It is worth noting that aluminium requires some care in cleaning — avoid abrasive scourers that can mark the surface, and check compatibility with any commercial dishwasher chemicals in use.

This lid is well suited to catering operations running large-batch cooking: contract caterers, central production kitchens, hotel banqueting operations, and similar high-volume sites. It is sized for substantial stockpots and is not intended for smaller saucepans or general-purpose use.

If you are building out a set or are unsure which lid size corresponds to a pot you already have, our team is happy to help you confirm the right match before you order.

This is a large-format aluminium lid from Pujadas, sized at 600mm diameter to fit the corresponding pans in their Century aluminium cookware range. Its purpose is straightforward: to cover a pan during cooking, retaining heat and moisture, reducing energy use, and keeping the contents at temperature during service.

In a busy kitchen, a well-fitting lid on a stockpot or large sauce pan makes a practical difference. Heat is retained more effectively, which means less energy is used to maintain a simmer or hold temperature during service. The aluminium construction conducts heat evenly and keeps the lid lightweight enough to handle quickly at the stove.

• Pure aluminium construction for reliable heat retention and low weight
• Tubular stainless steel handles provide an insulated grip to reduce burn risk
• Handles secured with four rivets each for a robust, long-lasting attachment
• Designed to complement the Pujadas Century aluminium cookware range

At this diameter, the lid is suited to high-volume operations where large-capacity pans are used routinely — stockpot stations in hotels, central production kitchens, and catering operations cooking in bulk. It is worth confirming the exact pan model before ordering, as lid fitment depends on matching the correct diameter within the Pujadas range.

If you are equipping a new kitchen or replacing lids across a set of pans, our team are happy to help confirm compatibility and suggest the right combination of cookware for your service style.