Casserole Lids

This is a replacement or companion lid from Pujadas' bronze cookware range, designed to fit 200mm casserole pots. The lid combines a tempered glass top with a stainless steel rim, allowing kitchen staff to monitor cooking without lifting the lid and interrupting the cooking process. A steam outlet valve is incorporated to regulate pressure and moisture during use.

In a busy kitchen environment, small details like lid fit and visibility matter more than they might appear. Being able to check a braise or stock without breaking the seal saves time and helps maintain consistent results across a service. The stainless steel rim adds durability and helps the lid hold its shape through repeated heating cycles and the knocks that come with day-to-day use in a professional kitchen.

• Tempered glass top allows monitoring without removing the lid
• Stainless steel rim resists chipping and maintains a close fit
• Steam valve helps manage moisture and pressure during cooking
• Robust enough for repeated use in commercial kitchen conditions
• Suitable for use with Pujadas bronze range casserole pots

This lid is primarily suited to kitchens already using Pujadas bronze range casseroles. It is worth confirming compatibility with your existing pots before ordering, as lid fit varies across ranges and sizes. If you are building out a new cookware set rather than replacing a single lid, it may be worth considering the full range to ensure consistency.

If you are unsure whether this lid fits your existing cookware, or you would like guidance on building out a consistent set, the team is happy to help you check compatibility before you order.

The Pujadas Bronze range glass casserole lid is a 240mm replacement or matching lid designed for use with casserole pots in professional kitchen environments. It features a transparent glass panel, a stainless steel rim, and a steam outlet valve — the three practical elements that make it a functional choice for day-to-day service cooking rather than a decorative accessory.

In a busy kitchen, the ability to monitor a dish without lifting the lid is a small but meaningful efficiency. Removing a lid to check a braise or sauce releases heat and moisture at the wrong moment; the glass panel allows a cook to assess progress at a glance and keep the lid on until it is genuinely needed. The steam valve helps regulate pressure build-up during cooking, which is useful when simmering stocks or slow-cooking at volume.

• Transparent glass panel for visual monitoring without lifting
• Stainless steel rim resists chipping and adds structural durability
• Steam outlet valve manages heat and moisture during cooking
• Suitable for use on matching Pujadas Bronze casserole pots

The stainless steel rim is the detail that tends to matter in a working kitchen — glass lids without a reinforced edge are prone to chipping at the rim when stacked or handled at pace, which both shortens lifespan and creates a hygiene consideration. The rim here addresses that directly.

This lid is suited to operators using Pujadas Bronze casserole pots who need a replacement or additional lid. It is worth confirming pot compatibility before ordering — if you are unsure whether this lid fits your existing pots, our team is happy to advise.

This is a replacement or supplementary lid designed to fit the Pujadas bronze casserole range at 280mm. The transparent glass construction allows cooks to monitor contents without lifting the lid, which is a small but practical advantage during a busy service when heat retention and timing both matter.

The stainless steel rim reinforces the edge of the glass, offering resistance to the knocks and stacking that are routine in a commercial kitchen environment. The built-in steam outlet valve helps regulate pressure and moisture during cooking, which is useful when simmering stocks, braises, or casseroles over extended periods.

In practical terms, the lid suits stations where Pujadas bronze cookware is already in use and a spare or replacement lid is needed. It is equally useful when a kitchen is building out its cookware inventory and requires lids to match existing pieces. Key points worth noting:

• Transparent glass allows monitoring without lifting and releasing heat
• Stainless steel rim resists chipping and extends working life
• Steam outlet valve helps regulate moisture during slow cooking
• Designed to pair with Pujadas bronze casserole cookware
• Straightforward to clean and compatible with standard commercial washing routines

As with any glass lid, it is not suitable for use under a grill or salamander, and care should be taken to avoid thermal shock — placing a cold lid onto a very hot pan or into cold water immediately after use can risk cracking. Verify the correct diameter against your existing cookware before ordering.

If you are unsure which lid size or range is the right match for your current cookware, the team is happy to help you confirm compatibility before you order.

This is a replacement or companion lid from Pujadas, designed to fit 320mm casserole pans from their Bronze cookware range. The lid combines a tempered glass panel with a stainless steel rim, allowing chefs to monitor contents without lifting the lid and losing heat — a small but practical advantage during a busy service when a pan needs to be left simmering unattended.

The steam outlet valve built into the lid helps regulate pressure and moisture during cooking, which is useful when reducing sauces or braising at lower temperatures. The stainless steel rim provides a degree of protection against chipping at the edge, which is a common failure point for glass lids in busy kitchen environments.

• Tempered glass panel for monitoring contents without removing the lid
• Stainless steel rim adds durability and reduces edge chipping risk
• Steam valve helps regulate moisture and pressure during cooking
• Compatible with Pujadas Bronze range 320mm casserole pans

This lid is straightforwardly suited to professional kitchens already using the Pujadas Bronze casserole range, particularly where lids have been lost or damaged over time. It is worth confirming pan compatibility before ordering, as lid fitment can vary across cookware ranges even within the same brand. If you are fitting out a kitchen from scratch or need guidance on building out a cookware set, the team are happy to help point you in the right direction.

These casserole lids are part of Steelite's Craft collection, designed to pair with the corresponding Craft Green casserole bowls for table service presentation. Made from alumina vitrified ceramic, they carry the characteristic hand-applied glaze finish that gives the Craft range its earthy, tactile quality — a deliberate contrast to the uniformity of standard catering crockery. The rich green colouration varies naturally between pieces, which is part of the aesthetic rather than a consistency issue.

In service, these lids perform the straightforward but important job of retaining heat during the pass and at the table. The alumina vitrified ceramic construction handles thermal cycling well and is oven and microwave safe, which means they can travel from oven to table without a swap. The dishwasher-safe finish holds up to the daily demands of a commercial rack washer, and the lifetime edge chip warranty from Steelite reflects confidence in the durability of the glaze and body under normal service conditions.

Practically, this kind of lidded casserole presentation suits environments where the serve is part of the experience — casual dining, gastropubs, bistros, and speciality restaurants where rustic or artisan aesthetics are a deliberate choice. The lids are sold separately from the bowls, so ensure the matching Craft Green casserole bowls are ordered alongside if not already in stock.

These are best suited to operations serving individual or shared portions in a covered presentation format. For venues running very high table-turn volumes, it is worth considering whether the hand-finished aesthetic aligns with the pace and handling expectations of that service style.

If you are building a table service specification around the Craft range or need guidance on matching pieces, our team is happy to help you work through the selection.

These lids are designed specifically for the Steelite Simplicity 3-litre casserole range. Made from alumina vitrified ceramic, they are sold in pairs and intended for oven-to-table service where a consistent, presentable finish matters throughout the meal.

In a working kitchen, lids like these tend to see harder use than most operators anticipate. They go from oven to pass to table and back again, often with temperature changes in between. The thermal shock resistance of the alumina vitrified ceramic construction means the lids handle those transitions reliably — moving from cold storage to a hot oven without the cracking risk that affects lower-grade ceramicware. That characteristic makes them genuinely practical rather than just decorative.

From an operational standpoint, using matched lids with the casserole dishes keeps heat in during service, reduces the need for separate serving covers, and presents cleanly at the table without additional transfer to serving bowls. Key practical points include:

• Thermal shock resistant — suitable for freezer-to-oven use
• Alumina vitrified ceramic construction resists chipping in normal service
• Matched to the Simplicity 3Ltr casserole for a consistent table presentation
• Sold in pairs, practical for stock management in busy operations
• Lifetime edge chip warranty reflects the durability of the range

These lids are well suited to restaurants, hotels, and contract catering operations serving casserole-style dishes direct to the table. They work where presentation is part of the service standard, not just back-of-house functionality. For operations running higher volumes or needing a larger casserole capacity, it is worth checking whether a larger dish and lid pairing would better match service requirements.

If you are building out a oven-to-table range or need guidance on matching lids to the correct casserole size across a larger order, the team is happy to assist.

These replacement and spare lids are designed to fit the Steelite Simplicity 2Ltr casserole dishes, supplied in a pack of three. Made from alumina vitrified ceramic in a clean white finish, they are part of a range built specifically for professional foodservice use, where presentation and durability both matter.

The alumina vitrified ceramic construction gives these lids a practical advantage in busy kitchens: they can move between freezer and oven without the risk of thermal shock, which allows operators to prepare dishes ahead of service and transfer them directly to heat when needed. The white finish is straightforward to keep clean and holds up well to the demands of regular commercial use.

For front-of-house service, the lids contribute to a tidy, consistent table presentation. The Simplicity range is designed with an oven-to-table workflow in mind, so dishes can go from the kitchen to the guest without the need to transfer to separate serving vessels.

• Thermal shock resistant — suitable for freezer-to-oven use
• Alumina vitrified ceramic construction for durability in daily use
• Clean white finish suitable for table presentation
• Sold in packs of three, practical for stocking spares

These lids are straightforward to integrate into any operation already using the Steelite Simplicity casserole range. There are no installation requirements, and no special storage considerations beyond standard ceramic handling care. Buying in packs of three helps maintain a consistent set on the pass without waiting on single replacements.

Well suited to restaurants, gastro pubs, hotel dining rooms, and catering operations where oven-to-table casserole service is a regular part of the menu. If your operation runs high volumes across multiple covers, it may be worth considering a larger stock of lids to keep service running smoothly during busy periods.

If you're unsure how many to hold in reserve for your service model, we're happy to help you work that out.