Mops & Brushes

This is a straightforward, narrow-profile cleaning brush designed specifically for reaching the interior of metal drinking straws, bottle necks, and other slim-necked vessels that standard brushes cannot access. The flexible construction allows it to navigate curves and bends without damaging the item being cleaned.

In a busy bar or kitchen environment, metal straws in particular present a genuine hygiene challenge — the bore is too narrow for cloths or standard bottle brushes, and inadequate cleaning creates obvious food safety concerns. A dedicated brush of this type is the practical solution, and it earns its place in any operation that serves reusable metal straws regularly.

• Reaches the full interior length of metal drinking straws
• Suitable for bottle necks, narrow vases, and similar slim vessels
• Flexible enough to follow bends without snagging
• Compact and easy to store at the wash station
• Metal construction for durability in daily commercial use

It is worth noting that this is a manual cleaning tool intended for individual item cleaning rather than batch throughput. Operations running high volumes of metal straws may want to consider whether their dishwasher cycle is adequate for straw interiors, or whether multiple brushes at the wash station would better suit the pace of service.

Well suited to bars, cafés, and any operation that has moved to reusable metal straws as part of a sustainability initiative, as well as kitchens that regularly clean narrow-necked equipment or glassware by hand.

If you are unsure whether this brush suits your specific cleaning requirements, the team is happy to help.

The SYR Kentucky mop head is a traditional loop-cotton mop head designed for general-purpose floor cleaning on hard surfaces. The stay-flat edge allows the mop to lie flush against the floor, picking up debris and liquid efficiently rather than pushing it aside. At 450g, it carries a reasonable volume of solution for covering larger floor areas without constant re-soaking.

In a commercial kitchen or bar environment, this type of mop head is a reliable everyday workhorse — suited to end-of-service cleans, spill response, and routine maintenance of tiled or sealed floors. Cotton construction absorbs well and holds cleaning solution evenly across the head.

This mop head is coded blue, making it part of SYR's colour-coded cleaning system. Colour coding helps operations maintain separation between cleaning zones — for example, keeping front-of-house and back-of-house mops clearly distinct, which supports food hygiene compliance. It is designed to fit the SYR interchangeable handle for the blue zone, so it integrates directly into an existing SYR colour-coded setup without additional adapters.

Cotton mop heads of this type do require regular laundering to maintain hygiene and performance, and will need replacing periodically under heavy daily use. For higher-volume sites running multiple daily cleans across large floor areas, a heavier-weight head may offer better longevity.

Well suited to bars, café kitchens, smaller restaurant operations, and any site already running SYR's colour-coded cleaning system. If you are building out a full colour-coded cleaning kit or are unsure which head weight suits your operation, the team is happy to help you put the right setup together.

The SYR SYRTEX Large Changer Socket Mop Head is a 16oz Kentucky-style mop head designed for routine floor cleaning in commercial kitchens, food service environments, and hospitality settings. It uses a specially blended looped SYRTEX yarn, developed to offer reliable pick-up performance and durability through repeated use and laundering cycles.

In a busy kitchen or front-of-house environment, mop heads take a good deal of punishment. The SYRTEX yarn construction is intended to maintain its form and absorbency across multiple wash cycles, which helps keep running costs down and reduces how often heads need replacing. The stay-flat design allows the mop to reach under equipment and into corners without bunching, which matters when you are working quickly during or between service periods.

Practical advantages for daily kitchen use include:

• Colour-coded blue head to support area segregation and reduce cross-contamination risk
• Patented SYR Tuf Ring socket fitting to secure the head and prevent accidental cross-use between zones
• Built-in scrub pad for tackling stubborn patches without switching tools
• Fully launderable construction to extend working life
• Compatible with SYR interchangeable socket mop handles

The colour-coded system is particularly relevant in kitchens operating under strict hygiene zoning — blue is a widely recognised designation for general or front-of-house areas, keeping it separate from food preparation zones. The interchangeable socket fitting means the head can be swapped onto a compatible handle without needing a separate tool for each area.

This mop head is well suited to small and medium-sized operations carrying out daily floor maintenance. For sites with very high footfall or heavy soiling, it is worth considering whether a heavier-duty or higher-weight head would better match the workload. If you are setting up a colour-coded cleaning system across multiple zones, the team can help you work out what you need across the range.

The SYR TC20-R is a Kentucky mop bucket and wringer designed for routine floor cleaning in commercial kitchens, food service areas, and front-of-house spaces. The 13-litre bucket and integrated wringer work together to make wet mopping a straightforward, controlled task — wringing excess water from the mop head before each pass to reduce over-wetting on hard floors.

Built from recycled plastic, the unit is robust enough for daily use in busy environments. The smooth-rolling castors allow it to be moved easily between areas during service, and the grippy handle gives operators a secure hold when manoeuvring across wet or uneven surfaces. The wringer accepts Kentucky mop heads across a practical weight range, making it compatible with the most common mop head sizes used in commercial settings.

The blue colour coding is an important practical detail rather than a styling choice. In kitchens and food service environments operating under colour-coded cleaning regimes — as recommended under HACCP guidelines — the blue designation typically denotes general low-risk areas. Using colour-coded equipment helps prevent cross-contamination between zones and keeps cleaning audits straightforward.

• Colour-coded blue for low-risk area compliance in zoned cleaning systems
• Castor-mounted base for easy movement around kitchen and service areas
• Compatible with Kentucky mop heads across common commercial weight ranges
• Recycled plastic construction suitable for daily heavy-use environments
• Integrated wringer controls water release for effective, controlled mopping

This bucket is well suited to smaller to mid-sized operations needing a reliable, low-maintenance cleaning setup. For sites with larger floor areas or very high-traffic corridors, a higher-capacity unit may reduce the frequency of bucket changes during a shift.

If you're building out a colour-coded cleaning kit or want guidance on which mop heads pair well with this bucket, our team is happy to help.

The SYR Kentucky mop head is a 450g cotton mop head designed for use as part of a colour-coded cleaning system in commercial kitchens, front-of-house areas, and food service environments. The red version is typically designated for specific zones or tasks — such as toilet areas or high-risk spaces — allowing cleaning staff to follow a consistent routine without risk of using the wrong equipment in the wrong area.

The cut-edge, stay-flat finish makes it practical for sweeping and mopping hard floor surfaces, picking up debris and moisture efficiently. Cotton construction absorbs well and withstands regular laundering, which matters in a commercial setting where mop heads need to be cleaned and reused rather than discarded frequently.

• Colour-coded red yarn and socket to support zone-specific cleaning routines
• Stay-flat cut edge for effective coverage on hard floors
• Cotton construction for good absorbency and repeated laundering
• Compatible with the SYR interchangeable colour-coded handle system
• Suitable for both back-of-house kitchen floors and front-of-house areas

It is worth noting that this mop head is designed to fit the SYR colour-coded interchangeable handle — if you are building or extending a colour-coded cleaning system, it is sensible to confirm handle compatibility before ordering. The colour-coding system only delivers its cross-contamination benefit when the whole team follows the zone designations consistently, so pairing the right mop heads with a clear cleaning protocol is important.

This mop head suits most commercial kitchens, cafés, restaurants, and food service sites that follow HACCP-based cleaning procedures. If your site has particularly high footfall or requires more frequent mop head changes, it may be worth stocking spares to maintain continuity during laundry cycles.

If you are setting up a full colour-coded cleaning kit or are unsure which components work together, we are happy to help you put the right system together.

This is a replacement microfibre cleaning pad designed for use with the SYR dual spray mop frame and handle. It is not a standalone mop — it fits the dedicated frame only and is intended to keep the system operational as pads wear through regular use.

Microfibre is a practical choice for commercial kitchen floors. It picks up grease, debris, and moisture effectively without requiring excessive cleaning solution, and the material holds up reasonably well to the repeated washing cycles that a busy kitchen environment demands. For day-to-day floor maintenance between deeper cleans, a microfibre pad used with a spray mop system is a common and sensible approach.

• Microfibre construction picks up grease and fine debris effectively
• Compatible with the SYR dual spray mop frame and handle
• Suited to routine floor maintenance in commercial kitchen environments
• Replaceable pad design keeps the mop system in continuous use

It is worth keeping a small stock of spare pads on site. In a working kitchen, pads can degrade or become too soiled mid-shift to continue using, and having a clean replacement to hand avoids interruption to floor maintenance routines.

If you are unsure whether this pad is compatible with the frame you already have, or if you need guidance on building out a cleaning kit for a larger site, feel free to get in touch with the team.

The Jantex Heavy Duty Broom and Handle Set is a straightforward, robust sweeping broom designed for daily use in commercial kitchen and food service environments. The 18" head gives a wide enough sweep for kitchen floors, prep areas, back corridors, and loading bays without being unwieldy in tighter spaces. The steel handle keeps the overall construction solid without adding unnecessary weight.

In busy kitchens, floor maintenance is a constant task between services and during close-down. A broom that holds up to repeated daily use across different floor types — quarry tile, concrete, textured safety flooring — is a practical necessity rather than an optional extra. This broom is built to handle regular sweeping of food debris, dry spillage, and general dust without the head or handle degrading quickly under commercial use.

• Wide 18" head covers ground efficiently during kitchen close-down
• Steel handle construction stands up to daily commercial use
• Suitable for indoor kitchen floors and outdoor service yard areas
• Works across common commercial floor types including tile and concrete
• Straightforward to use — no adjustment or assembly complications

There are no electrical, plumbing, or ventilation requirements. The broom is ready to use out of the box. Storage space is the main practical consideration — at just over 1.5 metres assembled, it will need a designated wall bracket or cleaning cupboard space. For sites with high footfall or very large floor areas, a wider broom head or a more industrial-grade alternative may be worth considering alongside this set.

This broom is well suited to smaller catering operations, cafés, pub kitchens, and food preparation areas that need a reliable everyday sweeping tool. It also works well as a secondary broom kept in a specific zone of a larger kitchen. For sites with extensive floor areas to cover on a shift-by-shift basis, a larger or more specialised model may offer better efficiency.

If you are equipping a new kitchen or putting together a full cleaning kit and would like to talk through what works well in practice, the team is happy to help.

The SYR SYRTEX Large Changer Socket Mop Head is a 16oz Kentucky-style mop head designed for routine floor cleaning in commercial kitchens, food service areas, and similar environments where hygiene and cross-contamination control matter. It uses a specially blended looped SYRTEX yarn and fits SYR's interchangeable socket system, making it a practical replacement head for operators already using compatible SYR handles.

In day-to-day use, the looped yarn construction absorbs and releases water efficiently, which helps maintain steady progress across larger floor areas without excessive wringing. The stay-flat design means the mop head lies flat against the floor surface rather than bunching, giving more consistent coverage during cleaning runs. The built-in scrub pad adds a degree of versatility for tackling dried spillages without switching to a separate tool.

From an operational standpoint, the key practical advantages are:

• Colour-coded red head supports kitchen zone separation and contamination control procedures
• Patented SYR Tuf Ring fitting locks the head securely and resists accidental detachment
• Interchangeable socket design means heads can be swapped without replacing the handle
• Built-in scrub pad handles light residue without a separate tool
• Fully launderable, reducing consumable waste and ongoing replacement costs

No installation requirements apply to this product. It is worth confirming handle compatibility before ordering if you are introducing SYR mop heads alongside existing equipment from another supplier, as the Tuf Ring fitting is specific to the SYR system.

This mop head is well suited to kitchens, front-of-house areas, and food preparation spaces where colour-coded cleaning protocols are in place. For very high-traffic sites with larger floor areas, a heavier-duty or higher-weight mop head may offer better durability between laundry cycles.

If you are equipping a new site or standardising your cleaning kit across multiple zones, the team is happy to talk through which weights and colour codes make sense for your setup.

The SYR NU Lady 2 is a compact, fully integrated mop bucket and wringer designed for routine floor cleaning in commercial kitchens, front-of-house areas, and similar environments. The wringing unit is built directly into the bucket rather than supplied as a separate attachment, which keeps the system tidy and reduces the chance of components going missing during a busy shift. The pick-up-and-go handle makes it straightforward to move between areas without needing to detach anything.

The unit is compatible with both kentucky-style and flat mops, which gives cleaning staff flexibility depending on the surface or area being tackled. A built-in dirt sump keeps soiled water separated from the working solution, and the integrated chemical portion pod allows consistent dosing without guesswork — both useful in environments where hygiene standards need to be maintained reliably across the whole team.

• Colour-coded green, supporting kitchen colour-coded cleaning protocols
• Castors for easy manoeuvring across kitchen and service floors
• Integrated wringer — no loose parts to lose or reassemble
• Chemical dosing pod for consistent, measured product use
• Compatible with kentucky and flat mop heads

Green colour coding makes this bucket suitable for use in food preparation and kitchen floor areas under standard colour-coded cleaning systems, helping operators demonstrate due diligence during inspections. The 9-litre capacity suits most standard cleaning rounds, though higher-traffic sites with large floor areas may find a higher-capacity bucket more practical for extended use between refills.

If you're unsure whether this unit fits your cleaning setup or want to check compatibility with your existing mop heads, the team is happy to help you work it out before you order.

The SYR Colour-Coded Lobby Spill Kit is a two-piece floor cleaning set comprising a lobby pan and a matching squeegee brush, supplied in green as part of a colour-coded cleaning system. It is designed for quick response to liquid spills on hard floor surfaces in commercial kitchen and food service environments.

In a working kitchen, spills happen during service and need to be dealt with promptly and hygienically. This kit keeps the necessary tools immediately to hand in a single unit, reducing the time staff spend locating equipment when a spill occurs. The squeegee brush directs liquid efficiently into the lobby pan, keeping the floor safe and dry with minimal effort.

• Colour-coded green to support zone-based hygiene and cross-contamination controls
• Two-in-one design keeps lobby pan and squeegee brush together as a single unit
• Polypropylene construction is easy to rinse clean and durable under regular use
• Practical for quick spill response during busy service periods
• Compact footprint suits storage in limited back-of-house spaces

The green colour designation is commonly used within colour-coded cleaning protocols to identify equipment allocated to specific areas, helping kitchens maintain separation between cleaning tools used in different zones. If your site operates a formal colour-coded system, it is worth confirming your zone colour assignments before ordering, as other colours in this range are available.

If you are setting up a colour-coded cleaning programme or are unsure which colours to allocate to which areas, the team is happy to talk it through with you.

This is a replacement looped-yarn mop head from SYR's colour-coded cleaning range, designed to fit the SYR yellow interchangeable handle as part of a structured kitchen hygiene system. Made from pre-shrunk syntex yarn, it is intended for routine floor cleaning in commercial kitchen environments where hygiene zoning is a requirement rather than an option.

The yellow colour coding is the practical point here. In a busy kitchen, the colour of a mop head communicates where it should and shouldn't be used at a glance — reducing the risk of cross-contamination between food preparation, washing-up, and general service areas. This is a straightforward way to support HACCP-compliant cleaning protocols without relying on staff memory alone.

From a day-to-day maintenance perspective, the syntex construction holds up well to regular commercial laundering. The mop head is machine washable at temperatures up to 90°C, which allows for thorough sanitisation between uses, and the material is rot-resistant, so it won't develop the odour problems that plague lower-grade alternatives after repeated wetting and drying.

• Colour-coded yellow for dedicated kitchen zone use
• Machine washable to 90°C for thorough sanitisation
• Rot-resistant syntex yarn — no odour build-up over time
• Designed for use with SYR colour-coded sieve buckets and wringers

This is a compact mop head suited to kitchens where maneuverability matters — tight service corridors, galley-style prep areas, or smaller sites. It fits within the broader SYR colour-coded system, so it works alongside matching handles, buckets, and wringers rather than as a standalone item.

If you are building out a full colour-coded cleaning system or need guidance on how to structure zone-specific cleaning across a larger site, the team are happy to assist.

The Jantex 30" galvanised steel squeegee is a straightforward, robust floor tool designed for clearing standing water, spillages, and wet residues from hard surfaces in commercial kitchens, prep areas, wash-downs, and similar environments. The wide 30" blade covers a generous sweep with each pass, reducing the number of strokes needed to clear large floor areas efficiently.

In a commercial kitchen setting, wet floors are a constant hazard — particularly during and after busy service periods or following equipment wash-downs. A squeegee of this width allows staff to move water quickly toward drain channels, helping to keep floor surfaces safer and reducing the time needed between tasks. The rubber blade edge draws liquid cleanly across tiles and sealed flooring without leaving significant streaking or pooling behind.

Practical day-to-day advantages include:

• Wide 30" blade clears large floor areas in fewer passes
• Galvanised steel frame resists corrosion in wet kitchen environments
• Rubber blade provides effective contact across smooth hard flooring
• Compatible with the Jantex L479 handle, keeping the operator at a comfortable working height
• Lightweight enough for repeated use during and after service

The squeegee head is designed to accept the Jantex L479 handle, which is sold separately. It is worth confirming handle compatibility before ordering if you intend to use an existing handle from your cleaning kit. This tool is suited to smooth, hard floor surfaces — it is not intended for textured or heavily grouted tile work where a mop or scrubber brush would be more appropriate.

This squeegee is well suited to kitchens, serveries, wash-up areas, and back-of-house spaces where routine wet floor clearance is part of the daily cleaning regime. For very high-frequency use across large sites, a heavier-duty version with a reinforced frame may be worth considering.

If you are looking to put together a complete floor cleaning kit or want guidance on the right combination of tools for your site, the team is happy to help.

The SYR extension pole is a straightforward reaching tool designed for cleaning high windows and elevated surfaces in commercial premises. Extending to 1,250mm, it allows operatives to access glass, frames, and high-level surfaces from floor level, reducing the need for steps or ladders during routine cleaning tasks.

At 440g, the pole is light enough to use comfortably over extended periods without causing fatigue — a practical consideration in sites where window cleaning is part of a regular daily or weekly regime. The extending design means it can be stored compactly when not in use, which matters in kitchens and back-of-house areas where storage space is often limited.

Typical uses include cleaning internal and external ground-floor windows, partition glass, extraction canopy panels, and other elevated hard surfaces that form part of a cleaning schedule. It is commonly paired with compatible SYR mop or scrubber heads, though compatibility with specific attachments should be confirmed before ordering.

This pole suits smaller commercial kitchens, cafés, front-of-house areas, and any site where routine glass or high-level surface cleaning is carried out by in-house staff. For sites with significantly higher ceilings or more demanding reach requirements, a longer or more heavy-duty pole may be more appropriate.

If you are unsure whether this pole is compatible with your existing SYR cleaning kit, or whether the reach suits your specific premises, feel free to get in touch — we are happy to point you in the right direction.

This is a 450g cotton Kentucky mop head from SYR, supplied in green as part of their colour-coded cleaning range. The mop head uses colour-matched yarn and a colour-coded socket, allowing kitchens to designate specific mops to specific areas — front of house, back of house, toilet facilities, or food preparation zones — as part of a structured cleaning protocol.

The stay-flat cut edge finish allows the mop to lie flat against hard floor surfaces, making it reasonably effective at picking up debris and liquid from tiles, vinyl, and sealed concrete. Cotton construction gives adequate absorbency for general floor cleaning following service.

• Colour-coded green for easy zone designation and contamination control
• Stay-flat cut edge for consistent contact with hard floor surfaces
• Cotton yarn construction for general-purpose absorbency
• Compatible with the SYR interchangeable handle system
• Suitable for front and back of house post-service cleaning routines

It is worth noting that cotton mop heads do require regular laundering to maintain hygiene standards, and in very high-throughput environments they may need replacing more frequently than synthetic alternatives. This mop head is designed to fit the SYR colour-coded interchangeable handle, so it works within a broader system if your site uses that range already.

Well suited to smaller catering operations, cafés, pubs, and school kitchens where a straightforward colour-zoning approach to cleaning is in place. If you are equipping a larger site with multiple cleaning stations or need advice on building out a compliant colour-coded cleaning system, the team are happy to help.

The SYR Long Tall Sally is a well-established mop bucket and wringer combination used across commercial kitchens, hospitality venues, and food service operations throughout the UK. The distinctive tall, vase-shaped design is not purely aesthetic — the narrower profile reduces the volume of water needed to achieve an effective mop head saturation, which in practice means less water used per session and less frequent bucket changes during a cleaning round.

This version is manufactured from recycled plastic, maintaining the same structural integrity and durability as the standard range. For operations with sustainability reporting requirements or waste reduction targets, the recycled material construction is a straightforward, low-effort contribution to those goals without any compromise in day-to-day performance.

In practical use, the bucket holds up well under the repetitive demands of a busy kitchen cleaning schedule. The integrated dirt sump collects debris from the mop head during wringing, keeping the wash water cleaner for longer. The ergonomic wringer is removable, which makes end-of-shift emptying and rinsing more straightforward and reduces the risk of moisture being trapped inside the wringer housing.

• Easy-glide, non-marking castors keep the bucket mobile without scuffing floors
• Fill level guide supports consistent water and chemical dilution each use
• Colour-coded red finish supports kitchen hygiene zoning protocols
• Removable wringer simplifies cleaning and drying after use
• Dirt sump extends effective working life of each bucket of water

The red colour coding makes this bucket straightforward to assign to a specific zone — typically washroom or back-of-house areas — in line with standard kitchen hygiene practices. Where higher-volume sites require multiple buckets running simultaneously or need a larger capacity, it is worth considering whether additional units or a higher-capacity alternative would better suit the operation.

If you are unsure which colour zoning system best fits your existing cleaning protocols, or whether this capacity is right for your floor area and shift pattern, feel free to get in touch with the team.

The Jantex 600mm flat mop head is a straightforward, practical cleaning tool designed to work with Jantex microfibre flat mop pads and the compatible Jantex handle (both sold separately). The aluminium frame provides a lightweight but sturdy base, and the 600mm working width covers a reasonable floor area per pass, making it a sensible choice for daily floor maintenance in kitchens and front-of-house spaces.

In a working kitchen environment, speed of clean-up matters — particularly during and after service when floors need to be kept safe and presentable. The flat mop format sits low to the floor and manoeuvres easily around equipment legs and under counters, which is where a traditional mop and bucket often struggles. Paired with microfibre pads, it picks up liquids and fine debris without excessive water use, which in turn means floors dry faster and present less of a slip risk.

• Aluminium frame keeps the overall weight low for staff comfort during extended use
• 600mm width reduces the number of passes needed across larger floor areas
• Flat head design accesses under counters and around equipment bases easily
• Compatible with Jantex microfibre pads, which can be laundered and reused
• Reduces reliance on chemical cleaning agents when used with appropriate microfibre pads

The 600mm width is well suited to small and medium-sized kitchens, café and bar environments, and front-of-house areas. For larger kitchen floors or where faster turnaround is needed, a wider frame may be worth considering.

If you're putting together a complete mopping setup or want to confirm pad and handle compatibility before ordering, the team is happy to help.

The SYR Yellow Lobby Spill Kit is a straightforward, practical cleaning set designed for dealing with floor spills quickly and hygienically in commercial kitchen and food service environments. The kit pairs a lobby pan with a yellow squeegee brush, both manufactured from polypropylene for durability and ease of cleaning.

In a busy kitchen, spills happen during service and the ability to clear them promptly matters — both for hygiene compliance and to reduce slip risk for staff. A dedicated spill kit kept close to hand means the response is immediate rather than improvised. The yellow colour coding is the key operational feature here: it allows kitchens to designate this kit to a specific area or task zone, which is a straightforward way to support food hygiene protocols and prevent cross-contamination between different parts of the operation.

• Yellow colour coding supports area-specific or task-specific cleaning regimes
• Lobby pan and squeegee brush combination handles wet and dry floor debris
• Polypropylene construction is robust, easy to wipe down, and resistant to common cleaning chemicals
• Compact footprint suits storage in tight spaces between equipment runs
• Lightweight enough for quick deployment during service without disrupting workflow

This kit is best suited to kitchens already operating a colour-coded cleaning system, or those looking to introduce one. It works well in smaller to mid-sized operations — cafés, pub kitchens, school canteens, and similar environments. Larger sites with higher floor area or more demanding spill volumes may want to consider a more heavy-duty lobby set or a broader colour-coded cleaning kit.

If you're putting together a full colour-coded cleaning setup and want to make sure you have the right combination of equipment for your site, we're happy to help you work through what's needed.

This is a straightforward 10-litre polypropylene bucket from Jantex, designed for general cleaning duties in commercial kitchens, food preparation areas, and front-of-house environments. The blue colouring makes it a natural fit for colour-coded cleaning regimes, where separating equipment by area or task type is a routine part of hygiene practice.

The graduated markings on the side allow for accurate measurement of water or cleaning solution, which is particularly useful where dilution ratios matter for chemical compliance. The wide pouring lip reduces the risk of spillage when emptying the bucket, which is a practical consideration in any kitchen or service area where wet floors create a slip hazard. The handle is sturdy enough for day-to-day handling when the bucket is full.

• Blue colouring supports colour-coded cleaning protocols to reduce cross-contamination risk
• Graduated markings allow accurate dilution of cleaning chemicals
• Wide pouring lip helps control emptying and reduces spillage
• Polypropylene construction is durable and resistant to common cleaning chemicals
• Practical size for general cleaning tasks without constant refilling

At 10 litres, this bucket suits most routine cleaning tasks. It is not designed for use with a mop wringer — if you need a wringing system, a purpose-built mop bucket with integrated wringer would be the more appropriate choice. For sites with very high cleaning volumes or multiple cleaning stations, it is worth considering whether a larger capacity or a complete mop and wringer kit would serve the operation better.

If you are setting up a colour-coded cleaning system from scratch or want to make sure you have the right equipment matched across your site, feel free to get in touch — it is the sort of thing that is easier to get right before you buy.

The SYR NU Lady 2 is a compact, fully integrated mop bucket and wringer unit designed for regular floor cleaning in commercial kitchens, food service environments, and front-of-house areas. The wringing mechanism is built directly into the bucket rather than clipped on separately, which keeps the unit stable during use and reduces the risk of components becoming detached during a busy shift.

The bucket accepts both smaller Kentucky mops and flat mops, which gives it reasonable flexibility across different cleaning routines. A built-in chemical portion pod supports consistent chemical dosing without the need for separate measuring equipment — useful where hygiene standards require a controlled dilution rate. Castors allow the unit to be moved freely around a kitchen or dining area without lifting, and a dirt sump at the base collects debris separately from the main wash water.

Practical benefits for day-to-day use include:

• Integrated wringer keeps the unit compact and stable during use
• Chemical dosing pod supports consistent and controlled dilution
• Compatible with Kentucky and flat mop heads for cleaning flexibility
• Castors allow easy movement across tiled or smooth floors
• Full red colour coding supports HACCP-compliant cleaning regimes

The red colour coding is a straightforward consideration rather than a purely aesthetic one — it aligns with standard kitchen colour-coding protocols and helps prevent cross-contamination between cleaning zones. This unit is sized for regular maintenance cleaning rather than high-frequency, large-area mopping; busier or larger sites may find a higher-capacity unit more practical.

If you are equipping a new kitchen and planning your cleaning colour-code system from scratch, or have questions about suitable mop types, the team are happy to help.

The SYR Dual Spray Mop is a floor cleaning tool designed around a self-contained 480ml internal reservoir, allowing operators to apply cleaning solution directly through the mop head without carrying a separate bucket. The anodised aluminium frame and handle combination keeps the unit lightweight at under a kilogram, making it straightforward to use during regular cleaning rounds.

In a commercial kitchen environment, the bucketless approach suits situations where moving a full mop bucket through a busy service or prep area is impractical. The integrated reservoir allows cleaning fluid to be dispensed as needed, which helps reduce over-wetting of floors — a practical consideration in areas where slip risk needs to be managed. The handle length is suited to standard adult working posture, reducing the need to stoop during use.

Practical advantages for kitchen and front-of-house teams include:

• No mop bucket required — reduces clutter in tight spaces
• Controlled fluid dispensing limits over-wetting on kitchen floors
• Lightweight anodised aluminium construction holds up to regular daily use
• Compact enough for storage in small cleaning cupboards or back-of-house areas

There are no electrical, water, or gas connections required. The reservoir is filled manually before use. This is a single-unit item and is sold individually. It is worth confirming replacement mop head compatibility before ordering if you intend to use alternative consumables.

This mop is well suited to smaller catering operations, front-of-house teams, and sites where quick, targeted floor cleaning between services is routine. For high-frequency heavy-duty cleaning across larger floor areas, a more robust mopping system may be worth considering.

If you have questions about suitability for your site or want to check consumable compatibility, the team is happy to help before you place an order.

The SYR interchangeable handle is part of a colour coded cleaning system designed to reduce cross-contamination risk in commercial kitchens, bars, and other food and drink environments. The yellow handle is conventionally assigned to bars and licensed areas, making it straightforward to enforce cleaning zone separation across a team without relying on memory or labelling.

The handle fits all mop heads and broom heads within the SYR interchangeable cleaning system range, so a single stock of handles can be paired with whichever head is needed for the task at hand. This interchangeability keeps storage simple and reduces the number of complete units a site needs to hold.

• Yellow designation suits bars and licensed areas under standard colour coding conventions
• Compatible across the full SYR interchangeable mop and broom head range
• Sold individually, allowing sites to build or replenish their colour coded set as needed
• Practical length suited to standard floor-level cleaning tasks
• Lightweight enough for extended use without operator fatigue

Colour coded cleaning systems are a common requirement under food safety and hygiene audits. Using a consistent system across all cleaning equipment helps demonstrate due diligence and simplifies staff training. Sites with a wider range of cleaning zones may want to consider the full SYR colour coded range to cover all areas.

If you are building out a full colour coded cleaning system or are unsure which colours apply to which zones in your operation, the team is happy to help you put the right set together.

The SYR NU Lady 2 is a compact, fully integrated mop bucket and wringer unit designed for regular floor cleaning in commercial kitchens, front-of-house areas, and food service environments. The bucket and wringing mechanism are combined into a single system, removing the need for a separate wringer attachment and making the unit straightforward to move, use, and store.

In day-to-day kitchen use, the pick-up-and-go handle makes it practical for porters and cleaning staff to move the unit quickly between areas during and after service. The integrated castors add to ease of movement, which matters in environments where floor cleaning needs to happen promptly and with minimal disruption to the team around it. The built-in dirt sump helps keep dirty water separated during wringing, which supports cleaner results on the floor surface.

From an operational standpoint, a few features are worth noting:

• Compatible with both kentucky mops and flat mop heads, giving flexibility across cleaning tasks
• Includes a chemical dosing pod to help maintain consistent dilution without guesswork
• Fully colour-coded blue, supporting HACCP-compliant colour segregation systems
• Castors allow easy repositioning without lifting
• Dirt sump separates soiled water during use

The blue colour coding makes this unit appropriate for general floor cleaning zones where sites operate a colour-coded hygiene system. At 9 litres, the capacity suits routine cleaning tasks rather than large-scale or continuous deep-clean operations. For higher-demand sites or where larger bucket capacity is needed, it is worth considering whether a higher-volume option would be more suitable.

If you are equipping a new site or reviewing your cleaning set-up and would like a steer on what works well in practice, the team is happy to help.

The Charles Bentley Bulldozer Broom is a wide-head floor broom designed for the kind of daily heavy use that commercial kitchens, back-of-house corridors, and service areas demand. The 610mm sweeping head combines stiff and soft bristles in the same head, allowing it to lift both coarser debris — food waste, grit, packaging fragments — and finer dust particles in a single pass.

In a working kitchen environment, the mixed-bristle construction means staff are not switching between brooms for different tasks or floor conditions. The broom works across hard floor surfaces including stone, sealed concrete, tile, and laminate, which makes it practical for kitchens with multiple adjoining areas such as prep rooms, dry stores, and service corridors.

A few practical advantages worth noting for kitchen operators:

• Wide 610mm head reduces the number of passes needed to clear larger floor areas
• Mixed bristle profile handles both food debris and fine dust without changing equipment
• Suitable across common commercial hard floor types — no need for separate brooms by zone
• Neoprene handle grip helps maintain control during extended cleaning shifts
• Lightweight at 1.5kg, reducing fatigue during end-of-service floor cleans

At 1.5kg, the broom is light enough to use comfortably over longer cleaning periods, which matters when end-of-service floor cleaning is being carried out quickly under time pressure. The neoprene handle provides a firmer grip than a bare plastic or wooden handle, which is useful on surfaces where dust or moisture is present.

This broom is well suited to small and medium kitchen operations where a single general-purpose floor broom covers most daily cleaning needs. For larger sites with extensive floor areas or very heavy debris loads, a heavier-duty or wider-head option may be worth considering. If you are unsure which broom suits your kitchen layout and floor type, the team is happy to point you in the right direction.

This is a replacement and interchangeable handle from SYR's colour-coded cleaning system, finished in green to denote use in bars and licensed areas. It is designed to fit and interchange across the full range of SYR mop heads and broom heads within the interchangeable system, allowing one handle to serve multiple tool heads as needed. Sold individually.

In a working commercial environment, colour-coded cleaning equipment is a practical way to enforce zone separation — preventing the same tools being used across food preparation areas, washrooms, and front-of-house spaces. Green is the conventionally recognised colour for bar and licensed area use, which helps staff identify the correct equipment at a glance without relying on labelling or instruction.

The handle fits the full SYR interchangeable range, so existing mop heads and broom heads can be paired with additional handles to support multi-zone operations without purchasing complete assemblies each time. Buying handles and heads separately also gives kitchens and cleaning teams the flexibility to replace worn components individually rather than discarding functional parts.

At 1,370mm in length and weighing 410g, it is a standard floor-tool handle length suitable for most operators. There are no installation requirements — it is ready to use straight away with compatible SYR interchangeable heads.

Well suited to pubs, bars, licensed restaurants, and any site already running SYR's colour-coded cleaning system. If you are setting up a colour-coded system from scratch or need handles and heads across multiple zones, the team are happy to talk through what you need.

The SYR red mini mop head is a 14-inch looped-yarn mop head made from pre-shrunk Syntex, designed for use in washrooms, bathrooms, and other wet areas as part of SYR's colour-coded cleaning system. At 200g it is a lightweight, compact option suited to smaller areas or where a full-size mop head would be impractical.

The pre-shrunk Syntex yarn is rot-resistant and machine washable at temperatures up to 90°C, which supports the hygiene standards expected in commercial and hospitality environments. Regular laundering at high temperatures keeps the head fresh and odour-free, extending its usable life and reducing the need for frequent replacement.

The red colour coding is the practical centre of this product's value in a professional cleaning programme:

• Red designation restricts use to washrooms and bathrooms, reducing cross-contamination risk
• Compatible with SYR's red interchangeable handle and red colour-coded sieve buckets or wringers
• Machine washable to 90°C for reliable hygiene maintenance between uses
• Rot-free Syntex construction prevents odour build-up during storage
• Lightweight at 200g, practical for regular handling by cleaning staff

This mop head is designed to fit the SYR red interchangeable handle and works within SYR's broader colour-coded cleaning system. For it to function correctly as part of that system, the matching handle and appropriately colour-coded bucket or wringer should be in use. It is not intended for use on kitchen floors or food preparation areas — the red designation specifically identifies it for sanitary areas.

Well suited to hotels, care homes, restaurants, pubs, and contract cleaning operations where a structured colour-coded cleaning protocol is in place. Sites running a larger cleaning team or higher-frequency cleaning schedules may want to consider keeping additional heads in rotation to allow for laundering cycles.

If you are setting up a colour-coded cleaning system from scratch or expanding an existing one, we are happy to help you work out what you need across handles, heads, and buckets.