Covers and Lids

This is the manufacturer-produced cover made specifically for the Cinders TG160 gas barbecue. It is not a universal fit — it is cut and shaped to the TG160's dimensions, so it sits cleanly over the unit without excess bunching or poor drape. Clip fastenings at the base hold it securely in place, which matters in the kind of exposed outdoor settings where the TG160 is commonly used.

Outdoor catering equipment tends to deteriorate faster than operators expect when left uncovered between services. Grease residue attracts debris, moisture works into burner components over time, and cooking surfaces become progressively harder to clean. A properly fitted cover reduces that exposure, helping to keep the unit in good working condition through a full outdoor season and cutting the preparation time needed before each service.

• Purpose-fitted for the TG160 — no bunching or poor drape
• Clip fastenings hold securely in exposed or elevated outdoor positions
• Weather-resistant fabric reduces moisture and debris accumulation
• Helps maintain the unit's condition and cleanliness between services
• Presents neatly in front-of-house settings where equipment is visible to guests

This cover is made for the TG160 only and will not fit other Cinders models correctly. Cinders produce model-specific covers across their range, so if you are running a different unit it is worth confirming the right cover before ordering — fitting an incorrect cover risks poor weather protection and potential damage to the cover itself.

If you are unsure which accessories are the right match for your Cinders setup, the team is happy to confirm compatibility before you place an order.

The Crown Verity BC72 is a purpose-made protective cover designed to fit the MCB72 mobile barbecue. It is a straightforward accessory with a clear function — keeping the unit protected when it is not in use.

Outdoor catering equipment is exposed to more wear between services than most operators account for. Dust, airborne debris, and damp conditions can gradually affect burner components, cooking surfaces, and stainless steel bodywork if left uncovered. For operators who run the MCB72 seasonally or move it between sites and events, a reliable cover helps maintain the unit in good working order across a longer service life.

Using a manufacturer-matched cover rather than a generic alternative is worth considering. A correctly fitted cover sits flush against the unit, which reduces the risk of moisture pooling or becoming trapped against surfaces — a common cause of surface corrosion on stainless steel equipment over time.

This cover is designed specifically for the MCB72 model and is not a universal fit. It should not be assumed compatible with other Crown Verity barbecue sizes without confirming first.

If you are looking after a Crown Verity MCB72 and want to make sure you have the right accessories to keep it in good condition, the team is happy to point you in the right direction.

The Crown Verity BC60 is a purpose-made cover designed exclusively for the MCB60 mobile barbecue. It is a straightforward protective accessory — its function is to shield the unit from dust, debris, moisture, and general exposure when the barbecue is not in service.

For operators running outdoor catering, event service, or seasonal al fresco covers, leaving a commercial barbecue exposed between uses will accelerate surface deterioration and increase the preparation work needed before the next service. A correctly fitted cover helps keep the unit in better condition, reduces pre-service cleaning time, and contributes to a longer working life for the barbecue itself.

Practical considerations for this accessory are straightforward. The BC60 is made to fit the MCB60 specifically and is not a universal cover — it should not be used as a substitute fit on other Crown Verity models. If the barbecue is used on busy outdoor sites or moved between locations, it is worth considering where the cover will be stored when the unit is in operation, particularly where loose items on site could become a hazard.

This cover is a sensible addition for any operator running an MCB60 as part of an outdoor or mobile catering setup, and becomes more important the more frequently the unit is stored outdoors or transported between sites.

If you are unsure whether this cover is compatible with your Crown Verity model, or if you are putting together a wider outdoor catering setup and want a steer on what you need, we are happy to help.

The BC48 is a purpose-made cover designed specifically for the Crown Verity MCB48 mobile charbroiler. Its function is straightforward: to protect the unit when it is not in service, shielding the burners, cooking surfaces, and frame from dust, moisture, and general weather exposure.

For operators running outdoor catering events, seasonal service periods, or a permanent outdoor cooking station, leaving a commercial barbecue uncovered between uses takes a gradual toll. Debris settles on cooking surfaces, moisture works into components, and the finish deteriorates faster than it needs to. A correctly fitted cover reduces that wear, keeps the unit cleaner going into each service, and cuts down the preparation time before the grill is needed.

• Tailored fit for the MCB48 — no adapting an ill-fitting generic cover
• Shields burners and cooking surfaces from debris and moisture during storage
• Reduces pre-service cleaning time and preparation effort
• Helps maintain the unit's appearance and condition over its working life
• Quick to fit and remove when turnaround between events is tight

It is worth being clear that this cover is model-specific. It is made for the MCB48 and will not fit other Crown Verity units correctly. If you are running a different model in the range, it is worth checking with us before ordering.

If you are putting together a full Crown Verity outdoor setup or simply want to confirm you have the right accessories for your unit, we are happy to talk it through.

The Crown Verity BC36 is a purpose-made protective cover designed to fit the MCB36 commercial barbecue unit. It is a straightforward accessory with a single, practical function: keeping the barbecue protected from weather, dust, and general site exposure when not in service.

For operators running outdoor catering events, seasonal terrace service, or permanent outdoor kitchen setups, leaving a commercial barbecue uncovered between uses accelerates wear on burner components, control valves, and cooking surfaces. Moisture ingress in particular can affect ignition reliability and surface condition over time. A correctly fitted cover reduces that exposure and helps keep the unit in consistent working order across a season.

• Tailored fit for the MCB36 ensures complete coverage without improvisation
• Helps protect burner assemblies and control valves from moisture and debris
• Reduces pre-service cleaning time by limiting dust and contaminant build-up
• Supports the long-term condition of the unit in exposed outdoor environments

It is worth noting that this cover is compatible with the MCB36 only. It is not a universal fit and should not be assumed to suit other Crown Verity models without confirming compatibility first.

This cover is best suited to operators who already own the MCB36 and use it regularly in an outdoor or semi-exposed setting. If you are unsure whether your specific MCB36 configuration is compatible, or if you are sourcing the barbecue and accessories together, the team is glad to help you confirm the right combination before you order.

The BC30 is a purpose-made protective cover designed specifically for the Crown Verity MCB30 mobile barbecue. It is not a universal cover — it is manufactured to fit the MCB30 precisely, ensuring the unit is properly enclosed when not in use rather than left exposed under an ill-fitting alternative that could trap moisture or shift in poor weather.

For operators running outdoor catering, terrace hospitality, or mobile event services, equipment left outside between shifts is exposed to rain, dust, grease residue, and seasonal weather. A well-fitted cover reduces that exposure meaningfully — protecting external surfaces, burner components, and control areas from the kind of gradual deterioration that builds up over a season of outdoor use. It also reduces the cleaning required before each service, as surfaces are less likely to have accumulated debris during storage.

Using the correct manufacturer-matched cover is a straightforward way to protect the working life of the MCB30. Poorly fitting covers can cause condensation to collect underneath, which over time does more harm than leaving the unit uncovered in dry conditions. The BC30 is designed to avoid that.

This cover is suited to any operator using the MCB30 as part of a regular outdoor catering setup — whether that is a pub garden, event caterer, or hospitality venue with seasonal al fresco service. If you are unsure whether this cover is the right fit for your unit, or have questions about accessories for your outdoor setup, the team is glad to help.

The Crown Verity RD60 is a roll dome lid made specifically for use with the Crown Verity MCB60 barbecue. Fitted over the cooking surface, it creates an enclosed environment that circulates heat around the food rather than allowing it to escape upward. It is a straightforward accessory with a clear purpose — extending what the MCB60 can do without requiring additional equipment.

On a busy grill, retaining heat makes a noticeable difference to throughput and consistency. Thicker cuts of meat, poultry pieces, and bone-in portions benefit considerably from the indirect, convection-style heat the dome creates. During peak service, when the grill surface is heavily loaded, an open setup can struggle to maintain temperature; the dome helps compensate for that heat loss and keeps cooking times predictable.

For operators running the MCB60 at events, festivals, or in a permanent outdoor hospitality setting, the practical advantages include:

• Indirect and convection-style cooking on a direct-flame grill
• More consistent results on thicker or bone-in cuts with less operator intervention
• Improved temperature retention when the cooking surface is fully loaded
• Broader menu capability without the need for additional cooking equipment
• Purpose-built fit that eliminates heat loss around the edges

One important consideration: the RD60 is designed exclusively for the MCB60 model and will not fit other Crown Verity barbecue sizes. Confirming your exact model before ordering is essential. Fitting requires no tools — the dome rolls and sits directly into place on the barbecue frame.

This lid suits catering operators and outdoor hospitality venues already using the MCB60 who want to handle a wider range of menu items during service. If you would like to talk through whether this works for your current setup, the team is glad to help.

The Crown Verity RD48 is a roll dome lid designed specifically for use with the MCB48 barbecue. It fits directly over the existing grill surface and creates an enclosed cooking environment, allowing heat to circulate around food rather than radiating upward from below alone.

Adding this lid changes how the MCB48 performs in service. Thicker cuts of meat, poultry, and whole sausages cook more evenly with significantly less risk of the outside charring before the centre is done. In outdoor or event catering settings where throughput matters, that consistency across a full service period makes a practical difference — both to the quality of the food and to the pace at which dishes come off the grill.

• More even cooking results across the full grill surface
• Reduced flare-up risk through better heat containment
• Faster cooking times for thicker items, supporting service pace
• Helps retain heat during brief holding periods between orders
• Roll-back mechanism keeps the lid clear when loading food

As an accessory, fitting is straightforward — no tools or additional connections are required. It is worth noting that this lid is designed exclusively for the MCB48 and will not fit other models in the MCB range. Confirming your unit's model designation before ordering is sensible.

This lid is well suited to operators running the MCB48 in pub gardens, hospitality venues, event catering, or any outdoor service environment where cooking consistency matters. If your output requirements are higher, it may be worth a conversation about whether a larger grill configuration would serve your operation better.

If you would like to talk through compatibility or whether this accessory fits how you currently work, the team is always happy to help.

The Crown Verity RD36 is a roll dome lid made specifically for use with the Crown Verity MCB36 and MCB72 barbecue units. It sits directly over the cooking surface and rolls back on its mechanism when access is needed, meaning operators can work the grill without removing the lid entirely or setting it aside.

On a busy outdoor grill, heat loss between batches is a practical problem. Without a lid, the cooking surface is exposed to ambient conditions and recovery time increases, which slows throughput during peak service. The RD36 traps heat above the grill, helping food cook more evenly and reducing the wait between covers. For events catering, pub gardens, and festival kitchens running continuous service, that difference is straightforward to notice when things are busy.

The roll-back design is particularly suited to compact outdoor setups where there is no obvious place to rest a loose lid safely. Because it stays attached to the unit, it does not create a burn risk or interrupt service flow when operators are moving quickly.

• Retains heat during service, supporting faster cooking between batches
• Roll-back mechanism keeps the lid attached and clear of the cooking surface
• Compatible with both the MCB36 and MCB72 barbecue models
• Practical in tight outdoor setups with limited space around the unit
• Useful for improving consistency from an existing Crown Verity barbecue

This is an accessory purchase rather than a standalone item, so it is worth confirming your barbecue model before ordering. It is relevant to operators who already own an MCB36 or MCB72 and want more consistent output from the unit they have.

If you want to talk through whether this lid suits your current setup, the team is glad to point you in the right direction.

The Crown Verity RD30 is a roll dome lid designed specifically to fit the MCB30 and MCB60 barbecue units. It sits over the cooking surface and encloses the heat, converting an open-flame grill into a covered cooking environment — closer in behaviour to an indirect grill or a low-level oven. It requires no modification to the base unit and fits without adaptation, provided you are running one of the two compatible models.

In a live outdoor catering environment, the practical difference is noticeable. Enclosing the cooking surface holds heat more effectively, which evens out temperature across the grill and reduces the recovery time between batches. For operators running continuous service at events, festivals, or large outdoor functions, that consistency makes a real difference to throughput and food quality, particularly when working through a varied menu that includes thicker cuts or items that benefit from indirect heat.

Adding the RD30 to an existing setup brings a number of operational advantages:

• Improved heat retention, which supports more consistent results across the cooking surface
• Faster temperature recovery between service batches
• Ability to roast, smoke, or cook indirectly — not possible on an open grill
• Reduced fuel consumption during extended service periods
• Broader menu flexibility without adding another piece of equipment

It is worth confirming your base unit model before ordering. The RD30 is matched to the MCB30 and MCB60 footprint and is not a universal fit across the wider Crown Verity range.

This lid suits operators who are already running Crown Verity MCB barbecues and want to extend their cooking capability without a significant further investment. If your operation demands a higher-output solution from the outset, it is worth discussing the broader Crown Verity range to find the right combination of units and accessories.

If you would like to talk through whether the RD30 works for your current setup, the team is glad to help you think it through.