Parry Plate Warmers

The Parry 1868 is a freestanding single door electric plate warmer designed to hold crockery at a consistent service temperature throughout the shift. The short cabinet format distinguishes it from full-height models — it is proportioned specifically for kitchens where back-of-house floor space is limited, or where a counter-top position is more practical than a floor-standing unit.

In a working kitchen, plate temperature has a direct effect on food quality at the pass. Cold crockery draws heat from plated dishes within seconds, which undermines the finished plate regardless of how well the food has been prepared. A dedicated plate warmer removes that risk without occupying oven capacity or placing any additional demand on the team during service. The thermostatic control holds a steady temperature suited to your crockery stock and, once set, requires very little day-to-day adjustment.

The practical advantages for daily operation include:

• Consistent plate temperature maintained throughout the full service period
• Frees oven capacity that would otherwise be used to warm crockery
• Chrome wire shelves promote even air circulation around stacked plates
• Thermostatic control is simple for any member of the team to manage
• Short cabinet height suits counter-top placement in tighter kitchen layouts

Installation is straightforward — the unit runs from a standard mains electrical connection and requires no specialist commissioning. Before ordering, it is worth confirming that the door hinge orientation suits your layout and that the footprint allows the door to open freely in your available space.

This model is well suited to smaller restaurants, cafés, bistros, and pub kitchens running moderate covers where crockery volume is manageable within a single-door cabinet. Sites running higher covers or holding larger crockery stocks may find a taller or multi-door unit a more practical fit. If you are unsure which capacity makes sense for your service pattern, the team is happy to talk it through.

The Parry 1869 is a freestanding, double door electric plate warmer built for commercial service. It holds crockery across three chrome wire shelves and uses thermostatic control to maintain a consistent plate temperature throughout a shift. There are no complicated controls or secondary functions — it is designed to do one job reliably, service after service.

Cold plates are a recurring problem in working kitchens and a common source of complaints from front-of-house staff and diners alike. A properly loaded plate warmer keeps crockery at the right temperature so food does not lose heat between the pass and the table. During a busy lunch or dinner service, having a steady supply of warm plates removes a pressure point that would otherwise slow the flow of covers. The Parry 1869 handles that role well in moderate-volume operations where plate temperature consistency matters and floor space is limited.

Practical day-to-day advantages include:

• Thermostatic control keeps plates at a safe, consistent temperature throughout service
• Double door configuration works well against a wall or within an equipment run
• Chrome wire shelves remove easily for cleaning between services
• Simple controls reduce the risk of misuse under service pressure
• No water connection or specialist ventilation required

Installation is straightforward. The unit runs on a standard electrical supply with no water feed or ventilation work needed. It is a floor-standing cabinet, so it is worth confirming available floor space and checking door swing clearance before ordering. Positioning relative to the pass or service station will make a practical difference to workflow.

The Parry 1869 is well suited to small and mid-sized restaurants, cafés, bistros, and hospitality venues running a single service station. For higher-volume operations with a larger plate count in circulation, a higher-capacity warmer with additional shelving may be a more practical fit. Parry has manufactured commercial catering equipment in the UK since 1943, and their plate warmers are a familiar and dependable presence in independent and contract catering kitchens.

If you would like to talk through whether this model suits your service volume or kitchen layout, the team is glad to help before you commit.

The Parry 1863 is a freestanding double door electric plate warmer designed to maintain a consistent, controlled supply of warmed plates throughout a commercial service. A thermostatically controlled heating system allows operators to set and hold a steady temperature across four chrome wire shelves, accommodating different plate weights and materials without risk of overheating crockery.

Cold plates are one of the more avoidable causes of front-of-house complaints, and a reliable plate warmer positioned at or near the pass removes that variable entirely. The Parry 1863 is built to hold plates at an even temperature from the first cover to the last — which matters as much to presentation as it does to the guest experience. The thermostatic control removes guesswork when switching between plate types during service.

The double door configuration is a practical advantage in pass and plating line arrangements, where staff need access from more than one position. The four chrome wire shelves are removable, which keeps end-of-service cleaning straightforward.

• Thermostatically controlled heating suits a range of plate types and materials
• Double door access works well for pass and plating line configurations
• Four removable chrome wire shelves simplify cleaning at the end of service
• Freestanding unit requires only a standard electrical connection
• Consistent plate temperature maintained from opening cover to last sitting

This unit is well suited to small and medium operations with regular, consistent cover volumes — restaurants, hotels, and catering venues where a steady throughput of warmed plates is part of the service routine. For higher-volume banqueting or event catering, a larger-capacity model may be a better match. If your operation is compact and covers are modest, a single door unit may be a more proportionate fit.

If you're unsure whether this unit suits your pass layout or service volume, the team is happy to talk it through before you commit.

The Parry 1832 is a tall, freestanding electric plate warmer with a single hinged door and four chrome wire shelves. It is designed to hold a substantial stock of warmed plates at a consistent temperature throughout the service period, with thermostatic control allowing operators to dial in a holding temperature suited to their crockery type and service style.

Cold plates are a quiet but persistent problem in busy kitchens. A dish leaving the pass in good condition can lose heat rapidly on a cold plate, and that affects the customer's experience before they've taken a first mouthful. Having a reliable, well-stocked supply of warm plates available from the start of service to the last cover removes that variable and takes pressure off the team when they can least afford distractions. The 1832 holds temperature steadily once set and requires no ongoing intervention during service.

Practical advantages for kitchen operators include:

• Thermostatic control maintains consistent plate temperature without risk of overheating crockery
• High shelf capacity reduces the need for mid-service replenishment
• Single door design helps retain chamber temperature between access intervals
• Chrome wire shelves are removable for straightforward cleaning
• No gas or water connections required — plug-in installation only

As a plug-in electric unit, the 1832 requires no fixed installation and no gas or water supply. It should be positioned on a stable, level surface with adequate clearance on all sides, and ideally located close to the pass to minimise the distance warm plates travel. Floor loading should be considered when the cabinet is fully stocked.

This model is well suited to restaurants, hotels, and function venues operating at mid-to-high covers who need a dependable, consistent plate supply across the full length of service. Smaller operations with lighter throughput may be better served by a lower-capacity unit, while very high-volume sites running multiple sections or back-to-back sittings may find a larger-capacity model a more practical fit.

If you're unsure whether this unit is the right size for your operation, we're happy to talk it through before you commit.